## Configuration File for OASIS3 #

## Target: 2021M1 Deployment

## Modified 27April2021 Figurski CFG for M12021, TNC to 2021M1, Minmax 2021 2023
## Modified 29June2020 Figurski CFG for M12020, TNC to 2020M1, Minmax 2020 2022, HRH 0 to 1200, ihs2 0 to 86400
## Modified 02May2019 Figurski CFG for M12019, TNC to 2019M1, Minmax 2019 2021
## Modified 03May2018 Figurski CFG for M12018, TNC to 2018M1, Minmax 2018 2020
## Modified 01May2017 Figurski CFG for M12017, TNC to 2015, Minmax valid year 2017 2019
## Modified 26May2016 Figurski 
## Modified 22Apr2015 Figurski Changed Metsys serial to 2C, TNC to 2015, Minmax valid year, pwrperm
## Modified 1Aug2014 Figurski Changed Metsys pwrperm and serial to 3E
## Modified 31Jul2014 Figurski Changing Mestys from 2C to 3C for deploying can #02
## Modified 21May2014 Figurski add #12 IMP-ODO, remove pCO2 
## Modified 21May2014 Figurski changing metsys back to 2C and pwrperm
## Modified 30Aug2013 Figurski Changing Metsys to 3C because 2C is blown
## Modified 21Aug2013 Figurski Durafet to 3600, PWRPERM, LWR amd SWR intervals
## Modified 19Aug2013 Figurski to add Duraphet Driver
## Modified 1Aug2013 Figurski with pCO2, OA4 with pCO2 and pumped system for O2, pH and Fluorometer 
## Modified Sept 13 E Rienecker; 17Feb2012 by PCoenen with pco2 constants for s/n567
## Modified 16Apr2012 R.Schramm & Jared Figurski with pco2 constants for s/n 451


#driver = <driver_name>,<display_name>[,<sample_interval>,<serial_port>,

#                                       <baud>,<serial_cfg>,<power_bit>,
#                                       <record_type>,<daymask>,<timeout>,
#                                       <parm0>,<parm1>,<parm2>
#                                     ]
driver = UserIF,,,,,N81_ECHO
driver = viper,radio,300,,,N81_ECHO,,,,240,60,30,0
#driver = Fluor,Wetstar,1800,13,,,0x82000
driver = emeter,emeter
driver = Garmin,GPS,1800,12,4800,N81,0x1000,,,,10
driver = Metsys,Metsys,600,6,,,0x40
driver = ASIMET,LWR,1200,15,9600,N81,0x8000,ASIMET_LWR,,,2,,240
driver = ASIMET,HRH,1200,7,9600,N81,0x80,ASIMET_HRH,,,1,,65
driver = ASIMET,SWR,1200,23,9600,N81,0x800000,ASIMET_SWR,,,5,,120
driver = HyperOCR,OCR,1200,10,38400,,0x400,,,30
driver = OnOff,EK60,0,11,,,0x800,,,180
#driver = pCO2,pCO2,3600,3,,,0x8,,,,,,0x200
driver = ISUS,ISUS,3600,21,9600,N81,0x200000
driver = Durafet_pH,Durafet,3600,24,9600,N81,0x10

driver = Microcat,0mCTD,600,14,,,0x4000,MICROCAT
driver = ADCP,ADCP,3600,2,,,0x4
driver = HS2_REV1,HS2,900,16,9600,N81,0x10000,HOBI_HS2,,,3,45,0
#driver = AanderaaO2,0mO2,600,24,,,0x1000000,,,5
driver = TString,TString,3600,27,,,0x8000000,,,,3,0x1BFC,0
driver = iHS2,200mHS2,86400,28,,,0x10000000,,,,20,6,60
driver = Microcat,10mCTD,600,26,,,0x4000000,MICROCAT2
driver = Microcat,20mCTD,600,20,,,0x100000,MICROCAT3
driver = gflt,GF,600,25,,,0x2000000
driver = OASIS
driver = gpsClock,gpsClock,3600,12,4800,N81,0x1000,GPSCLOCK,0,10,3,60,5
#driver = BinLogger,Logger,300,,,,,,,,3,256
driver = OASlave,Slave1,0,5,9600,N81,0x20

## System Configuration Parameters

TNC = 2021M1
pwrperm = 05304064
ascii = true
shutterSync0 = PrrShutter

#The following calibration coefficients are for pCO2 s/n IRG2-567
#doCO2cal = true
#CO2CAL = *0138.94,18320,0.134814,1.27241e-05,4.72209e-09,-4.45710e-13,2.83487e-17,390
#CO2OFFSET = *7158.937
#CO2SLOPE = *720.01530
#CO2CHANNEL = *7343

#The following control the allowable range of dates/times that
#the isus and gpsclockset drivers are allowed to make clock
#adjustments within.
minvalidyear = 2021
maxvalidyear = 2023