The batch file "SAVE.BAT" will Save the SEADeViL's eeprom images to files.
It will save eeprom files with extension as listed:

		 Block #	 Extension
		---------	----------
		    0		   .A00
		    1		   .A01
		    2		   .A02
		    3		   .A03
		    4		   .A04
		    5		   .A05
		    6		   .A06
		   15		   .BIT


The procedure of loading is as follows:

        1.     Connect PC com1 to the SEADeViL J3 as follows:

                    J3-6  to COM1-5
                    J3-2  to COM1-2
                    J3-8  to COM1-3

        2.     With the SEADeViL power off, Type "SAVE.BAT" at the dos prompt
               and depress the ENTER key

        3.     Power up the SEADeViL when prompted.

        4.     The software will save the current EEPROM images to files and 
	       then exit the program.

        5.     Power off the SEADeViL.


Please email eeprom files with above extension to Kearfott.