The batch file "GFIMOD.BAT" will lower the SEADeViL's gyro fringe models eeprom to 1.2(orig. were 2.4)
The procedure of loading is as follows:

        1.     Connect PC com1 to the SEADeViL J3 as follows:

                    J3-6  to COM1-5
                    J3-2  to COM1-2
                    J3-8  to COM1-3

        2.     With the SEADeViL power off, Type "GFIMOD.BAT" at the dos prompt
               and depress the ENTER key

        3.     Power up the SEADeViL when prompted.

        4.     The software will update the current Block 1 EEPROM image then exit the program.

        5.     Power off the SEADeViL.
