Index of /internal/projects/368000_DMO_AUV/Drawings/Multibeam/6KWhr Battery MidBody/Midbody

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]0 PARALLEL SHELL MOLD.SLDPRT2003-03-27 14:50 108K 
[ ]1 MidSection. Shell Flange.SLDDRW2003-05-09 12:34 485K 
[ ]1 PARALLEL SHELL BASE PART.SLDPRT2003-04-23 10:57 155K 
[ ]1 PARALLEL SHELL FLANGE BASE PART.SLDPRT2003-04-07 17:44 193K 
[ ]1 PARALLEL SHELL FLANGE TOP PART.SLDPRT2003-04-23 10:56 287K 
[ ]5_16-18UNC SCREW ASSY.SLDASM2003-04-08 08:37 240K 
[IMG]8.5in Forward Section.DXF2003-04-24 12:23 589K 
[IMG]8.5in Forward Section RevB.DXF2003-04-24 12:22 168K 
[IMG]15 Inch Forward Section.DXF2003-04-24 12:21 150K 
[IMG]AFT FOAM INSERT for MidSection.DXF2003-04-24 12:25 148K 
[ ]Acorn Low Crown Nut_AI.SLDPRT2002-09-26 14:04 185K 
[ ]BOLT 5_16 X 2.25.SLDPRT2003-02-04 11:47 140K 
[ ]BOTTOM PARALLEL SHELL FLANGE.SLDPRT2003-04-23 10:56 263K 
[ ]BRACE TOP, PARALLEL FRAME.SLDPRT2003-04-07 19:45 387K 
[ ]Bottom Bulkheads Mk2.SLDPRT2003-05-01 16:37 2.9M 
[ ]C-CHANNEL, MIRROR.SLDPRT2003-04-23 10:56 263K 
[ ]C-CHANNEL.SLDPRT2003-04-08 08:25 469K 
[ ]CLAMP-RIM ASSEMBLY.SLDASM2003-04-23 10:56 1.9M 
[ ]COMPRESSION RING.SLDPRT2003-04-07 17:25 1.5M 
[ ]EDGETECH CHIRP.SLDPRT2003-05-01 16:37 390K 
[ ]EDGETECH DW-216.SLDPRT2003-03-31 15:43 264K 
[ ]EDGETECH DW-216 HYDROPHONE.SLDPRT2003-02-11 16:40 665K 
[ ]EDGETECH DW-216 JUNCTION BOX.SLDPRT2003-02-13 16:14 210K 
[ ]EDGETECH SONAR MOUNT.SLDPRT2003-05-01 16:37 439K 
[ ]End Plate Mk2.SLDPRT2003-04-07 17:08 278K 
[ ]FLANGE, PARALLEL, BOTTOM.sldasm2003-04-08 08:37 150K 
[ ]FLANGE, PARALLEL, TOP.sldasm2003-04-08 08:37 231K 
[ ]FLANGED BUSHING.SLDPRT2003-04-23 10:56 348K 
[ ]FLAT HEAD SCREW.SLDPRT2003-02-07 16:57 312K 
[ ]FLAT WASHERS (U.S.).SLDPRT2003-03-26 13:13 431K 
[ ]FRONT SLOTTED TAB.SLDPRT2003-02-11 08:52 248K 
[ ]Fairing Assembly.SLDASM2003-04-08 08:37 713K 
[ ]Flat Washer Type A Narrow_AI.sldprt2003-03-31 15:15 216K 
[ ]Flat Washer Type A Selected Wide_AI.sldprt2002-09-26 14:04 80K 
[ ]Flat Washer Type A Wide_AI.sldprt2003-03-31 15:51 77K 
[ ]Flat Washer Type B Regular_AI.sldprt2003-04-07 18:09 221K 
[ ]Foam Under PV.SLDPRT2003-04-23 10:56 81K 
[ ]HEX FLANGED INSERTRevB.SLDPRT2003-03-27 17:26 222K 
[ ]HEX INSERT .312-18.SLDPRT2003-02-04 11:47 156K 
[ ]Heavy Hex Jam Nut_AI.sldprt2002-09-26 14:04 185K 
[ ]Hex Bolt_AI.SLDPRT2003-04-07 17:18 316K 
[ ]Hex Finished Bolt_AI.SLDPRT2003-03-31 15:15 334K 
[ ]Hex Screw_AI.sldprt2002-09-26 14:04 134K 
[ ]IMPULSE CONNECTOR.SLDPRT2003-04-23 10:56 293K 
[ ]INSERT MOUNT.SLDPRT2003-04-23 10:56 163K 
[ ]Inner Volume.SLDPRT2003-02-10 17:50 126K 
[ ]KEY .75SQ.SLDPRT2003-04-01 14:22 496K 
[ ]KEY ASSEMBLY.SLDASM2003-04-23 10:56 466K 
[ ]KEY ASSEMBLY WATER.SLDPRT2003-04-23 10:56 505K 
[ ]Lift Beam.SLDASM2003-04-08 08:37 350K 
[ ]LiftHook.SLDPRT2003-04-07 17:09 230K 
[ ]Lock Washer Spring Regular_AI.sldprt2003-04-30 17:41 329K 
[IMG]Lower Foam.21 inch Blank.DXF2003-04-24 12:32 457K 
[ ]Lower Foam.SLDPRT2003-04-23 10:56 428K 
[ ]Lower Frame.SLDASM2003-05-01 16:37 2.3M 
[ ]MUCK UP FOAM INSERT.SLDPRT2003-04-22 17:41 157K 
[ ]Machine Screw Nut Hex_AI.sldprt2003-04-08 08:30 609K 
[ ]Male Tab.SLDPRT2003-02-04 11:47 157K 
[ ]MapHousing.SLDPRT2003-04-07 13:13 783K 
[ ]MapHousingAssem.SLDASM2003-04-08 08:13 492K 
[ ]Mapping PV BlankEnd.SLDPRT2003-02-04 11:48 542K 
[ ]Mapping PV revB.SLDPRT2003-02-04 11:48 1.2M 
[IMG]MidBody.Assy.DXF2003-04-24 12:19 313K 
[ ]MidBody.SLDASM2003-04-23 14:36 1.2M 
[IMG]MidSec. 2.5in.AftSec.DXF2003-04-24 12:24 185K 
[IMG]MidSec. 2.5in.FwdSec.DXF2003-04-24 12:20 184K 
[IMG]MidSec. 8 in.Blank.Top.DXF2003-04-24 12:24 157K 
[ ]Mount Plate.SLDPRT2003-05-01 16:37 447K 
[ ]Muckup MKII_reservoir on back.SLDPRT2003-04-23 10:56 907K 
[ ]Muck up interface.SLDASM2003-04-23 11:06 588K 
[ ]NUT, HEX, MACHINE, .31.SLDPRT2003-03-25 11:50 194K 
[ ]NUTS ANSI B18.6.3.SLDPRT2003-02-04 11:48 343K 
[ ]PLANE BUSHING.SLDPRT2003-03-27 14:47 168K 
[ ]PROFILE TENSION BAND.SLDPRT2003-02-04 11:47 333K 
[IMG]PV Base Foam.DXF2003-04-24 12:26 119K 
[ ]PV Bulkhead Bracket.SLDPRT2003-04-08 08:02 218K 
[ ]RETAINER TENSION BAND.SLDPRT2003-02-04 11:47 255K 
[ ]RIM WELDMENT.SLDASM2003-04-08 08:37 1.4M 
[ ]RUBBER WELL NUT.SLDPRT2003-04-01 14:22 240K 
[ ]Rails.SLDASM2003-04-23 10:56 2.2M 
[IMG]SBP Foam.DXF2003-04-24 12:31 610K 
[ ]SBP Foam.SLDPRT2003-04-23 10:56 528K 
[ ]SCREW BTN HD .190-24UNC-2A X .75L.SLDPRT2003-03-31 11:36 243K 
[ ]SHELL INSERT RING.SLDPRT2003-03-27 14:47 346K 
[ ]SHELL INSERT RING MKII_002.SLDPRT2003-04-23 10:56 542K 
[ ]SHOULDER SCREW .25-20 .4375L .25S.SLDPRT2003-03-27 14:27 283K 
[ ]SLOTTED NUT.SLDPRT2003-03-25 11:50 190K 
[ ]SLOTTED TAB, CAP SCREW.SLDPRT2003-02-04 11:47 187K 
[ ]SOCKET HEAD CAP SCREWS (U.S.).SLDPRT2003-03-26 18:22 1.8M 
[ ]SWING WASHER.SLDPRT2003-03-25 16:17 155K 
[ ]Socket Head Cap Screw_AI.SLDPRT2003-05-02 12:25 1.7M 
[ ]Swing Washer fastner assembly.SLDASM2003-04-08 08:13 116K 
[ ]T-BOLT TENSION BAND.SLDPRT2003-02-04 11:47 212K 
[ ]TC2158.SLDASM2003-04-08 08:13 198K 
[ ]TC2158.SLDPRT2003-04-07 15:44 472K 
[ ]TC2158 Inner Vol.SLDPRT2003-02-10 13:06 86K 
[ ]TENSION BAND ASSEMBLY.SLDASM2003-04-23 11:06 450K 
[ ]THREADED ROD.SLDPRT2003-04-07 13:13 165K 
[ ]TOP PARALLEL SHELL.SLDPRT2003-04-23 10:56 466K 
[ ]Thumbs.db2026-07-09 08:00 317K 
[ ]UPPER FRAME, PARALLEL SECTION.SLDASM2003-04-23 14:17 924K 
[ ]Upper foam.SLDPRT2003-04-23 11:47 3.1M 
[ ]WASHER 5_16.SLDPRT2003-03-25 11:50 120K 
[ ]angle.SLDPRT2003-04-07 19:03 118K 
[ ]bulkhead bracket fasteners.SLDASM2003-04-23 10:56 154K 
[ ]compressin brace.SLDPRT2003-02-11 08:52 157K 
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80