Index of /internal/projects/368000_DMO_AUV/Drawings/Multibeam/TailSection

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]001874_Transducer.SLDPRT2008-11-01 14:46 113K 
[ ]8CB-7000-I Pressure Sensor.SLDPRT2013-08-11 11:48 227K 
[ ]13in_sphere.SLDPRT2008-11-01 14:46 179K 
[ ]13inch_mvc.SLDASM2008-11-01 14:46 397K 
[ ]51505_Shock_Mount.SLDPRT2008-11-01 14:46 148K 
[ ]1001714.SLDPRT2008-11-01 14:46 846K 
[ ]1002393 - Upward LF Transducer Mount.SLDPRT2008-02-19 16:20 158K 
[ ]ASSEMBLY, DROP WEIGHT, BURN WIRE, STD NOSE.SLDASM2008-02-19 08:48 273K 
[ ]AT421 Transducer.SLDPRT2008-11-01 14:46 174K 
[ ]AftLowerFoam.SLDPRT2008-11-01 14:46 186K 
[ ]AftUpperFoam.SLDPRT2008-11-01 14:45 423K 
[ ]Antenna Blade - 2.4.SLDPRT2014-02-24 15:46 3.0M 
[ ]Attmt Bar or DropWeight Sys.SLDPRT2008-02-19 16:20 106K 
[ ]BALL END.SLDPRT2008-02-19 16:20 78K 
[ ]BOTTOM TAIL SHELL.SLDPRT2008-02-19 16:20 307K 
[ ]BOTTOM TAIL SHELL SUB-ASSEMBLY.SLDASM2008-02-19 16:20 206K 
[ ]BRACKET, BURN WIRE ASSEMBLY, STD NOSE.SLDPRT2008-02-19 08:48 373K 
[ ]BURN WIRE, PARALLEL.SLDPRT2008-02-19 08:48 83K 
[ ]BURN WIRE ASSY.SLDASM2008-02-19 08:48 99K 
[ ]Ball-Joint Rod End .sldasm2008-02-19 16:20 115K 
[ ]Cable_bend.SLDPRT2008-02-19 08:49 55K 
[ ]Clamp.SLDASM2008-02-19 16:20 155K 
[ ]ClampBand.SLDPRT2008-02-19 16:20 131K 
[ ]ClampProfile.SLDPRT2008-02-19 16:20 98K 
[ ]Comp_bandclamp.SLDPRT2019-09-12 09:14 367K 
[ ]Compensator.SLDASM2019-09-12 09:14 473K 
[ ]DGO_3way.SLDPRT2008-02-19 16:20 183K 
[ ]DGO_Block2.SLDPRT2008-02-19 08:49 546K 
[ ]DGO_CoaxLoad2.SLDASM2008-02-19 08:49 241K 
[ ]DGO_Mainbody2.SLDPRT2008-02-19 08:49 165K 
[ ]DGO_RF_CONN.sldprt2008-02-19 08:49 233K 
[ ]DGO_hexplug.sldprt2008-02-19 08:49 123K 
[ ]DGO_with_connectors.SLDASM2008-02-19 16:20 145K 
[ ]DROPWEIGHT LATCH.SLDPRT2008-02-19 08:48 102K 
[IMG]Dgx2DPlot-1.bmp2008-11-01 14:46 531K 
[ ]DropWeight,Large Diameter.PDF2013-02-28 10:48 186K 
[ ]DropWeight,Large Diameter.SLDDRW2013-02-28 10:48 642K 
[ ]DropWeight,Large Diameter.SLDPRT2025-08-14 15:23 175K 
[DIR]DropWeight System/2024-03-21 13:58 -  
[ ]END CAST, BURN WIRE.SLDPRT2008-02-19 08:48 80K 
[ ]FLANGED BUSHING.SLDPRT2008-02-19 16:20 137K 
[ ]FRAME ARM.SLDPRT2008-02-19 16:20 313K 
[ ]FRAME BACKPLATE NEW.SLDPRT2008-02-19 16:20 304K 
[ ]FRAME TAILCONE.SLDASM2008-02-19 16:20 738K 
[ ]Fin Antenna 2.4.SLDASM2025-08-14 15:23 639K 
[ ]Flat Head SCS (U.S.).SLDPRT2008-02-19 08:48 642K 
[ ]Fwd_Bus_Cable.SLDPRT2008-02-19 16:20 64K 
[ ]GPS MASTER Rev 1.SLDPRT2014-02-25 10:11 272K 
[ ]GlassMEH.SLDPRT2008-02-19 16:20 224K 
[ ]HEX FLANGED INSERTRevB.SLDPRT2008-02-19 16:20 141K 
[ ]HomerPro.SLDPRT2008-02-19 16:20 94K 
[ ]INS Horizontal Plate.SLDPRT2008-11-01 14:46 418K 
[ ]INS_rear_plate.SLDPRT2008-11-01 14:46 107K 
[ ]Kearfott Bay Foam Guide.SLDPRT2008-02-19 16:20 116K 
[ ]KearfottCanBracket.SLDPRT2008-11-01 14:46 146K 
[ ]KearfottTail2.SLDASM2008-11-01 14:45 4.8M 
[ ]KearfottTopFoam.SLDPRT2008-11-01 14:46 272K 
[ ]KearfottW Brackets.SLDASM2008-11-01 14:46 440K 
[ ]Kearfott_Base_Plate.SLDPRT2008-02-19 16:20 210K 
[ ]Kearfott_SubAssembly.SLDASM2008-02-19 16:20 440K 
[ ]L-LEVER.SLDPRT2008-02-19 08:48 147K 
[ ]MINK_penetrator.SLDPRT2008-02-19 16:20 156K 
[ ]MVC Housing Tradeoffs.doc2008-11-01 14:46 56K 
[ ]MVC_elec_mass.SLDPRT2008-02-19 16:20 47K 
[ ]Multibeam Tail Arch.ppt2008-11-01 14:45 48K 
[ ]NUT, MACHINE, .190-24UNC-2B.SLDPRT2008-02-19 16:20 81K 
[ ]NUT, MACHINE, .250-28UNF-2B.SLDPRT2008-02-19 16:20 83K 
[ ]NovatechStrobe.SLDPRT2008-02-19 16:20 133K 
[ ]Nut, Thin, 300S SS.SLDPRT2008-02-19 16:20 79K 
[ ]ORE 4355B Transducer.SLDPRT2008-02-19 08:48 99K 
[ ]PIN, DOWEL, .1875 NOM, X .50L.SLDPRT2008-02-19 08:48 131K 
[ ]Piston.SLDPRT2019-09-12 09:14 43K 
[ ]ROD END.SLDPRT2008-02-19 16:20 111K 
[ ]RUBBER WELL NUT.SLDPRT2008-02-19 16:20 153K 
[ ]Receive Head Assembly.SLDASM2012-02-03 11:08 661K 
[ ]Rev4_Kearfott_Foam_Copy.SLDPRT2008-02-19 16:20 6.8M 
[ ]Rev4_MVC_Bay_Foam.SLDPRT2008-02-19 16:20 283K 
[ ]Rev4_TransducerBay_Foam.SLDPRT2008-02-19 16:20 737K 
[ ]Rim.SLDPRT2012-02-03 11:08 292K 
[ ]RimTab.SLDASM2012-02-03 11:08 552K 
[ ]SCREW, CAP, FLH, SKT, .190-24UNC-2A X .75L.SLDPRT2008-02-19 16:20 86K 
[ ]SCREW, CAP, SKT, .190-24UNC-2A X .50L.SLDPRT2008-02-19 08:48 102K 
[ ]SCREW, SKT HD CAP, .190-24UNC-2A X 1.00L.SLDPRT2008-02-19 16:20 89K 
[ ]SCREW, SKT HD CAP, .190-32UNF-2A X 1.00L.SLDPRT2008-02-19 16:20 83K 
[ ]SHELL INSERT RING.SLDPRT2012-02-03 11:10 198K 
[ ]SLEEVE, BURN WIRE.SLDPRT2008-02-19 08:48 128K 
[ ]SOCKET HEAD CAP SCREWS (U.S.).SLDPRT2008-02-19 08:48 1.1M 
[ ]SPACER, BURN WIRE MECHANISM.SLDPRT2008-02-19 08:48 58K 
[ ]STOP SLEEVE.SLDPRT2008-02-19 08:48 65K 
[ ]Screw, SKT HD Cap, 4-40-UNC.SLDPRT2008-02-19 16:20 64K 
[DIR]Second Mapping Vehicle/2025-12-29 14:35 -  
[ ]SharpSert Flanged Insert.SLDPRT2008-02-19 16:20 120K 
[ ]Socket Head Cap Screw_AI.SLDPRT2013-02-15 16:24 274K 
[ ]StainlessShockMount.SLDPRT2008-02-19 16:20 88K 
[ ]SubconnMCLPIL9M.SLDPRT2008-02-19 16:20 81K 
[ ]T-bolt.SLDPRT2008-02-19 16:20 59K 
[ ]TAILCONE FOAM PACK.SLDPRT2008-02-19 16:20 858K 
[ ]TAILCONE MOUNT.SLDPRT2008-02-19 16:20 2.1M 
[ ]TAILCONE MOUNT ASSEMBLY.SLDASM2008-02-19 16:20 147K 
[ ]TAIL FLANGE BOTTOM PORT.SLDPRT2008-02-19 16:20 279K 
[ ]TAIL FLANGE BOTTOM STARBOARD.SLDPRT2008-02-19 16:20 265K 
[ ]TAIL FLANGE TOP PORT.SLDPRT2025-08-14 15:23 181K 
[ ]TAIL FLANGE TOP STARBOARD.SLDPRT2025-08-14 15:23 170K 
[ ]TAIL SHELL ASSEMBLY.sldasm2008-11-01 14:45 3.4M 
[ ]TOP TAIL SHELL.SLDPRT2025-10-13 18:16 266K 
[ ]TOP TAIL SHELL SUB-ASSEMBLY.SLDASM2025-08-14 15:23 241K 
[ ]Tab.SLDPRT2012-02-03 11:08 189K 
[ ]TabFlat.SLDPRT2012-02-03 11:08 104K 
[ ]Tail Botttom Port Flange w inserts.sldasm2008-02-19 16:20 107K 
[ ]Tail Botttom Starboard Flange w inserts.sldasm2008-02-19 16:20 152K 
[ ]Tail Cone Simple.SLDASM2008-02-19 16:20 72K 
[DIR]TailSection/2025-10-10 13:05 -  
[ ]Thumbs.db2026-07-07 13:02 482K 
[ ]Transducer_Bay_Gusset.SLDPRT2008-02-19 16:20 301K 
[ ]WASHER, FLAT, .190 NOM.SLDPRT2008-02-19 16:20 57K 
[ ]WASHER, FLAT, .250 NOM.SLDPRT2008-02-19 16:20 62K 
[ ]WASHER, LOCK, HELICAL, .190 NOM.SLDPRT2008-02-19 16:20 66K 
[ ]WASHER, LOCK, HELICAL, .250 NOM.SLDPRT2008-02-19 16:20 64K 
[ ]WASHER, LOCK, HLCL SPR, .190 NOM, REG DUTY.SLDPRT2008-02-19 08:48 124K 
[ ]Washer, 300S Stainless.SLDPRT2008-02-19 16:20 44K 
[ ]Washer, SAE #6.SLDPRT2008-02-19 08:48 70K 
[ ]Weight Cage.SLDPRT2008-02-19 08:48 452K 
[ ]Well Nut - 93495A250.SLDPRT2014-02-25 10:11 121K 
[ ]XDR Shroud RevA.SLDPRT2008-02-19 16:20 412K 
[ ]aft_foam_guide.SLDPRT2008-02-19 16:20 45K 
[ ]antenna_strobe_mast2.SLDPRT2008-02-19 16:20 159K 
[ ]base.SLDPRT2019-09-12 09:14 78K 
[ ]base1.SLDPRT2019-09-12 09:14 43K 
[IMG]bend_displacement_no_frame.bmp2008-11-01 14:46 531K 
[ ]bulkhead_parallel_section_generic.SLDPRT2008-02-19 16:20 1.4M 
[ ]kearfott4_mounting plate.SLDPRT2008-02-19 16:20 903K 
[ ]kearfottAlignPlate.SLDPRT2008-11-01 14:46 178K 
[ ]kearfottBottomFoam.SLDPRT2008-11-01 14:42 1.2M 
[ ]kearfottCanBeamGusset.SLDPRT2008-11-01 14:45 183K 
[ ]kearfottCanBracketry.SLDASM2008-11-01 14:46 186K 
[ ]kearfottCanLongBeamGusset.SLDPRT2008-02-19 16:20 299K 
[ ]kearfottGusset.SLDPRT2008-11-01 14:46 71K 
[ ]kearfottLowerFoam.SLDPRT2008-11-01 14:46 340K 
[ ]kearfottMiddleFoam.SLDPRT2008-11-01 14:46 1.4M 
[ ]kearfottRearBracket.SLDPRT2008-11-01 14:46 111K 
[ ]kearfottTail.SLDASM2008-11-01 14:46 3.0M 
[ ]kearfottUpperFoam.SLDPRT2008-11-01 14:46 1.2M 
[ ]kearfott_case_copy.SLDPRT2008-02-19 08:49 282K 
[ ]kearfott_endcap_copy.SLDPRT2008-02-19 08:49 258K 
[ ]kearfott_endcap_w_penetrators.SLDASM2008-02-19 08:49 127K 
[ ]kearfott_internal_volume.SLDPRT2008-02-19 08:49 68K 
[ ]kearfott_lower_mnt_plate.SLDPRT2008-11-01 14:46 712K 
[ ]kearfott_rev1_copy.SLDPRT2008-02-19 08:49 237K 
[ ]kearfott_rev2_copy.SLDASM2008-02-19 08:49 351K 
[ ]kearfott_upper_mnt_plate.SLDPRT2008-11-01 14:46 746K 
[ ]meh_with_penetrators2.SLDASM2008-02-19 16:20 691K 
[ ]mlpbh.SLDPRT2008-02-19 16:20 69K 
[ ]shock_mount_assembly.SLDASM2008-11-01 14:46 120K 
[ ]shock_mount_spacer.SLDPRT2008-11-01 14:45 387K 
[ ]sphere_mount_plate.SLDPRT2008-02-19 16:20 191K 
[ ]swxJRNL.BAK2008-11-01 14:46 646  
[ ]swxJRNL.swj2008-11-01 14:46 645  
[ ]tail4_upperfoam.SLDPRT2008-11-01 14:46 156K 
[ ]thermal calcs.xls2008-11-01 14:46 17K 
[ ]weight&balance.xls2008-11-01 14:46 71K 
[ ]~$1002393 - Upward LF Transducer Mount.SLDPRT2008-07-11 15:33 8  
[ ]~$ASSEMBLY, DROP WEIGHT, BURN WIRE, STD NOSE.SLDASM2008-10-11 17:23 8  
[ ]~$Attmt Bar or DropWeight Sys.SLDPRT2008-07-11 15:33 8  
[ ]~$BRACKET, BURN WIRE ASSEMBLY, STD NOSE.SLDPRT2008-07-11 15:33 8  
[ ]~$BURN WIRE, PARALLEL.SLDPRT2008-07-11 15:33 8  
[ ]~$BURN WIRE ASSY.SLDASM2008-07-11 15:33 8  
[ ]~$DROPWEIGHT LATCH.SLDPRT2008-07-11 15:33 8  
[ ]~$END CAST, BURN WIRE.SLDPRT2008-07-11 15:33 8  
[ ]~$Flat Head SCS (U.S.).SLDPRT2008-09-09 14:14 8  
[ ]~$Fwd_Bus_Cable.SLDPRT2008-07-11 15:33 8  
[ ]~$GlassMEH.SLDPRT2008-10-11 17:39 8  
[ ]~$HEX FLANGED INSERTRevB.SLDPRT2008-10-11 17:53 8  
[ ]~$Kearfott Bay Foam Guide.SLDPRT2008-07-11 15:33 8  
[ ]~$L-LEVER.SLDPRT2008-07-11 15:33 8  
[ ]~$MINK_penetrator.SLDPRT2008-09-09 14:24 8  
[ ]~$Nut, Thin, 300S SS.SLDPRT2008-10-11 17:23 8  
[ ]~$ORE 4355B Transducer.SLDPRT2008-07-11 15:33 8  
[ ]~$PIN, DOWEL, .1875 NOM, X .50L.SLDPRT2008-10-11 17:23 8  
[ ]~$Rev4_MVC_Bay_Foam.SLDPRT2008-10-11 17:23 8  
[ ]~$Rev4_TransducerBay_Foam.SLDPRT2008-10-11 17:23 8  
[ ]~$SCREW, CAP, SKT, .190-24UNC-2A X .50L.SLDPRT2008-07-11 15:33 8  
[ ]~$SLEEVE, BURN WIRE.SLDPRT2008-07-11 15:33 8  
[ ]~$SPACER, BURN WIRE MECHANISM.SLDPRT2008-07-11 15:33 8  
[ ]~$STOP SLEEVE.SLDPRT2008-07-11 15:33 8  
[ ]~$Screw, SKT HD Cap, 4-40-UNC.SLDPRT2008-07-11 15:33 8  
[ ]~$SharpSert Flanged Insert.SLDPRT2008-10-11 17:23 8  
[ ]~$StainlessShockMount.SLDPRT2008-10-11 17:39 8  
[ ]~$Transducer_Bay_Gusset.SLDPRT2008-10-11 17:23 8  
[ ]~$WASHER, LOCK, HLCL SPR, .190 NOM, REG DUTY.SLDPRT2008-07-11 15:33 8  
[ ]~$Washer, 300S Stainless.SLDPRT2008-10-11 17:39 8  
[ ]~$Washer, SAE #6.SLDPRT2008-07-11 15:33 8  
[ ]~$Weight Cage.SLDPRT2008-10-11 17:23 8  
[ ]~$XDR Shroud RevA.SLDPRT2008-07-11 15:33 8  
[ ]~$aft_foam_guide.SLDPRT2008-07-11 15:33 8  
[ ]~$antenna_strobe_mast2.SLDPRT2008-07-11 15:33 8  
[ ]~$bulkhead_parallel_section_generic.SLDPRT2008-10-11 17:23 8  
[ ]~$kearfott4_mounting plate.SLDPRT2008-10-11 17:23 8  
[ ]~$meh_with_penetrators2.SLDASM2008-10-11 17:23 8  
[ ]~$mlpbh.SLDPRT2008-10-11 17:39 8  
[ ]~$sphere_mount_plate.SLDPRT2008-07-11 15:33 8  
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80