Kearfott_Isolation_Checkout Sch/PCB Doc. No. 100221339 Rev B S/N 001 POWER Sh 2 Connect +5V J1 pin 3,6 Return on J1 pin 1,4 Verify 5V at TP4 ( with respect to Kearfott GND ) OK Verify current draw about 80 mAmps measured 24 mA steady state Measure inrush current measured 1.8 A ~100 uS FWHM Verify 5V at TP18 ( with respect to MVC GND ) OK 1 PPS Connect 1PPS TTL Pulse into J6 pin 4 Return on J6 pin 3 Verify 1 PPS TTL pulse to Kearfott on J1 pin 2,5 with respect to J1 pin 1,4 OK TRIG RS232 Connect cable assembly to J7 Connect DB9 "TRIG RS232" to RS232 from computer ( part of J7 assembly ) Connect cable "RS485 TRIG" to J4 Connect jumper J5 pins 1 and 2 Verify complementary RS485 pulses on J4 pins 3 and 6 Return on J4 pin 1 OK TRIG TTL Connect cable assembly to J7 Connect TRIG TTL pulse into J7 pin 14 Return on J7 pin 7 (upper/middle) Connect cable assembly to J4 Verify complementary RS485 pulses on J4 pins 3 and 6 (yel/blu) Return on J4 pin 1 (blk) OK GPS RS232 Connect cable assembly to J7 Connect DB9 "GPS RS232" to RS232 from computer ( part of J7 assembly ) Connect DB9 "RS232_GPS" to RS232 from computer to J2 Verify communication from MVC to Kearfott BAUD rate 9600 OK BI-DIRECTIONAL RS232 Connect cable assembly to J7 Connect DB9 "RS232 BI-DIR" to RS232 from computer ( part of J7 assembly ) Connect DB9 "RS232_BI_DIR" to J3 Connect jumper J8 pins 1 and 2 (left/ctr) Verify two-way communications between MVC and Kearfott* BAUD rate 115200 BI-DIRECTIONAL RS485 FULL DUPLEX Connect cable assembly to J7 Connect DB9 "BI-DIR" to RS232 from computer ( part of J7 assembly ) Connect DB9 "RS485_FULL" to J3** Connect jumper J8 pins 2 and 3 (ctr/right) Verify two-way communications between MVC and Kearfott* BAUD rate 115200 OK * TeraTerm https://ttssh2.osdn.jp/index.html.en ** Dtech USB 2.0 to RS422/RS485