#Image: /boot/sys/boot -v
#Image: /boot/sys/Proc32 -l 9 
#Image: /boot/sys/Slib32
#Image: /boot/sys/Slib16
#Image: /bin/Fsys 
#Image: /bin/Fsys.eide fsys -Ndsk0 -n0=hd0. -n5=cd0. eide -a1f0 -i14
#Image: /bin/mount -p /dev/hd0.0 /dev/hd0.0t77 /
#Image: /bin/sinit TERM=qnxm
#export NODE=9
/usr/local/bin/fan_test on
export KBD=en_US_101.kbd
export ABLANG=en
export CON_KBD=USA
export TZ=utc00
#export TZ=pst08pdt07,M4.1.0/2,M10.5.0/2
/bin/rtc -l hw
Dev &
emu87 &
Pipe &
# Lippert has 2 serial ports 3f8,4 and 2f8,3
/bin/Dev.ser -F -m -N/dev/ser1 3f8,4 &
/bin/Dev.ser -F -m -N/dev/ser2 2f8,3 &
#Connecttech has 4 ports: 380,9 388,9, 390,9 398,9
/bin/Dev.ser -F -m  -t 14 -y 1500000 -C 5000 -I 5000 -N/dev/ser3 380,9 388,9 390,9 398,9 300,9 308,9 310,9 318,9 150,9 158,9 160,9 168,9 & 
#Connecttech has 4 ports: 300,9 308,9 310,9 318,9
#/bin/Dev.ser -F -m -t96 -y 1500000 -N/dev/ser7 300,9 308,9 310,9 318,9 &
#/bin/Dev.ser -F -m -t96 -N/dev/ser11 150,9 158,9 160,9 168,9 &
#set up serial 1 for iridium use
#stty baud=19200 -osflow +ihflow +ohflow +lkhflow < /dev/ser1
#set up iridium modem to auto-answer after 1 ring
#echo "ATS0=1" > /dev/ser1

Dev.ansi -Q -n6 &
reopen /dev/con1
kbd $CON_KBD
prefix -A /dev/console=/dev/con1
Dev.par &
Dev.pty -n16 &
/bin/Fsys.floppy -a3f0 -i6
/bin/Iso9660fsys /cd0.0=/dev/cd0.0 &
# Define the default CD Rom
/bin/prefix -A /cd=//0/cd0.0
nameloc &
chkfsys -Pu / > /tmp/chkfsys.log
Dosfsys  a=/dev/fd0 &
if test -f /etc/config/bin/tcpip.$NODE
then
. /etc/config/bin/tcpip.$NODE
fi
if test -f /etc/config/bin/ph.$NODE
then
. /etc/config/bin/ph.$NODE
else
tinit -t /dev/con1 &
tinit -T /dev/con[2-6] &
fi

#start a console session for the iridium modem
#tinit -t /dev/ser1 &
#run a tail on the syslog, to extract GPS fixes, and send them to the iridium
#modem for all to get at
#/usr/bin/qtalk -m /dev/ser1 -x "tail -f /tmp/syslog | grep parseFix > /dev/ser1" &
/bin/Mqueue &
/usr/bin/syslogd&
/usr/local/bin/settime &