MMW SYSTEM CALCULATOR
Copyright (c) GM Hughes Electronics, 1990.



HARD DISK INSTALLATION
======================

To run to Calculator from you hard disk, follow these steps...


1.  Go to the disk on which you intend to install the program:

       C: <Enter>

2.  Create a subdirectory to hold the program.

       MD MMW <Enter>

3.  Go into the new subdirectory.

       CD MMW <Enter>

4.  Put the disk in a floppy drive and copy the files.

       COPY A:*.* <Enter>

5.  Start the program.

       MMW <Enter>


You will find it will execute much more quickly, since the calcu-
lations are stored in a database.



CONFIGURING YOUR SYSTEM
=======================

The Calculator program takes a considerable amount of RAM (About
400k).  If the program is locking up or erroring out, try running
it without any RAM-resident programs in memory.

It is also possible that your configuration file has an insuffi-
cient number of files and buffers allocated.  For the Calculator
to function adequately, your CONFIG.SYS file (located in the root
directory) should contain the following statements:

   FILES   = 20
   BUFFERS = 8

These numbers are minimums, the program will work fine with
larger file and buffer assignments.



UNSOLVEABLE PROBLEMS
====================

If, after reconfiguring your system and eliminating RAM-resident
programs from memory, the Calculator program still doesn't work,
feel free to call us at (213)517-6400 or (better yet) FAX us at
(213)517-7665.  We welcome your comments and suggestions for
future improvements.