Duane,

Kim will need your assistance to offload the video from the i2MAP section in the next few days. Here are the instructions:

1) Log into mvc-dmo1
2) The profile should be set so $AUV_CONFIG_DIR is /home/dorado1/auv-qnx-dev/auv/altex/onboard/config/i2map_dmo1 which is reported before the first prompt.
3) Run the command-line application carlTest.  The app should automatically turn on the power to both the camera and recorder. After about 45 seconds, the app will say the recorder is up. You can leave carlTest running all day.
4) Let Kim download clips. He will bring an ice bag to keep the temperature reasonable. But...
5) The carlTest app displays a simple menu where you enter numbers to select commands. Number 28 at the bottom displays the environmental data, like temperature. Use that to check that the temperature is below 38.
6) After Kim is finished, use carlTest to (1) first turn the recorder off with #6 (takes a few seconds), and then (2) turn the camera off with #3.
7) It is now safe to remove power from the vehicle.

Enjoy your stay-cation.

-Rich