/* ---------------------------------------------------------------------------- * ATMEL Microcontroller Software Support * ---------------------------------------------------------------------------- * Copyright (c) 2009, Atmel Corporation * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * - Redistributions of source code must retain the above copyright notice, * this list of conditions and the disclaimer below. * * Atmel's name may not be used to endorse or promote products derived from * this software without specific prior written permission. * * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ---------------------------------------------------------------------------- */ //------------------------------------------------------------------------------ /** * \page sam3s_ek_board_desc "SAM3S-EK - Board Description" * * \section * A file is dedicated to descibe the AT91SAM3S-EK board. * * \section Contents * - The code for booting the board is provided by board_cstartup.S and * board_lowlevel.c. * - For using board PIOs, board characteristics (clock, etc.) and external * components, see board.h. * - For manipulating memories (remapping, SDRAM, etc.), see board_memories.h. * * To get more software details and the full list of parameters related to the * SAM3S-EK board configuration, please have a look at the source file: \n * \ref board.h\n * * This file can be used as a template and modified to fit a custom board, with * specific PIOs usage or memory connections. **/ //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \file board.h /// /// \par Purpose /// /// Definition of AT91SAM3S-EK characteristics, AT91SAM3S-dependant PIOs and /// external components interfacing. /// /// \par Usage /// -# For operating frequency information, see "SAM3S-EK - Operating frequencies". /// -# For using portable PIO definitions, see "SAM3S-EK - PIO definitions". /// -# Several USB definitions are included here (see "SAM3S-EK - USB device"). //------------------------------------------------------------------------------ #ifndef BOARD_H #define BOARD_H //------------------------------------------------------------------------------ // Headers //------------------------------------------------------------------------------ /* These headers were introduced in C99 by working group ISO/IEC JTC1/SC22/WG14. */ #include #include #if defined(at91sam3s4) #include "at91sam3s4/chip.h" #include "at91sam3s4/AT91SAM3S4.h" #else #error Board does not support the specified chip. #endif //------------------------------------------------------------------------------ // Definitions //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \par /// This page lists several definition related to the board description. /// /// Definitions /// - BOARD_NAME /// Name of the board. #define BOARD_NAME "AT91SAM3S-EK" /// Board definition. #define at91sam3sek /// Family definition (already defined). #define at91sam3s /// Core definition #define cortexm3 //#define BOARD_REV_A #define BOARD_REV_B //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \par sam3s_ek_opfreq "SAM3S-EK - Operating frequencies" /// This page lists several definition related to the board operating frequency /// (when using the initialization done by board_lowlevel.c). /// /// !Definitions /// - BOARD_MAINOSC /// - BOARD_MCK /// Frequency of the board main oscillator. #define BOARD_MAINOSC 12000000 /// Master clock frequency (when using board_lowlevel.c). //#define BOARD_MCK 48000000 #define BOARD_MCK 64000000 //------------------------------------------------------------------------------ // ADC //------------------------------------------------------------------------------ /// Startup time max, return from Idle mode (in µs) #define ADC_STARTUP_TIME_MAX 15 /// Track and hold Acquisition Time min (in ns) #define ADC_TRACK_HOLD_TIME_MIN 1200 //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// USB attributes configuration descriptor (bus or self powered, remote wakeup) //#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP #define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \par sam3s_ek_piodef "SAM3S-EK - PIO definitions" /// This pages lists all the pio definitions contained in board.h. The constants /// are named using the following convention: PIN_* for a constant which defines /// a single Pin instance (but may include several PIOs sharing the same /// controller), and PINS_* for a list of Pin instances. /// /// !ADC /// - PIN_ADC0_AD0 /// - PIN_ADC0_AD1 /// - PIN_ADC0_AD2 /// - PIN_ADC0_AD3 /// - PIN_ADC0_AD4 /// - PIN_ADC0_AD5 /// - PIN_ADC0_AD6 /// - PIN_ADC0_AD7 /// - PINS_ADC0 /// /// !UART /// - PINS_UART /// /// !EBI /// - PIN_EBI_DATA_BUS /// - PIN_EBI_NCS0 /// - PIN_EBI_NRD /// - PIN_EBI_NWE /// - PIN_EBI_ADDR_BUS /// - PIN_EBI_PSRAM_NBS /// - PIN_EBI_A1 /// - PIN_EBI_LCD_RS /// /// !LEDs /// - PIN_LED_0 /// - PIN_LED_1 /// - PIN_LED_2 /// - PINS_LEDS /// /// !MCI /// - PINS_MCI /// /// !Push buttons /// - PIN_PUSHBUTTON_1 /// - PIN_PUSHBUTTON_2 /// - PINS_PUSHBUTTONS /// - PUSHBUTTON_BP1 /// - PUSHBUTTON_BP2 /// /// !PWMC /// - PIN_PWMC_PWMH0 /// - PIN_PWMC_PWML0 /// - PIN_PWMC_PWMH1 /// - PIN_PWMC_PWML1 /// - PIN_PWMC_PWMH2 /// - PIN_PWMC_PWML2 /// - PIN_PWMC_PWMH3 /// - PIN_PWMC_PWML3 /// - PIN_PWM_LED0 /// - PIN_PWM_LED1 /// - PIN_PWM_LED2 /// - CHANNEL_PWM_LED0 /// - CHANNEL_PWM_LED1 /// - CHANNEL_PWM_LED2 /// /// !SPI /// - PIN_SPI_MISO /// - PIN_SPI_MOSI /// - PIN_SPI_SPCK /// - PINS_SPI /// - PIN_SPI_NPCS0_PA11 /// /// ! SSC /// - PIN_SSC_TD /// - PIN_SSC_TK /// - PIN_SSC_TF /// - PINS_SSC_CODEC /// /// ! PCK0 /// - PIN_PCK0 /// /// !TWI /// - PIN_TWI_TWD0 /// - PIN_TWI_TWCK0 /// - PINS_TWI /// /// !USART0 /// - PIN_USART0_RXD /// - PIN_USART0_TXD /// - PIN_USART0_CTS /// - PIN_USART0_RTS /// - PIN_USART0_SCK /// /// !USB /// - PIN_USB_PULLUP /// /// ADC_AD0 pin definition. #define PIN_ADC0_AD0 {1 << 21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} /// ADC_AD1 pin definition. #define PIN_ADC0_AD1 {1 << 30, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} /// ADC_AD2 pin definition. #define PIN_ADC0_AD2 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} /// ADC_AD3 pin definition. #define PIN_ADC0_AD3 {1 << 4, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} /// ADC_AD4 pin definition. #define PIN_ADC0_AD4 {1 << 15, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} /// ADC_AD5 pin definition. #define PIN_ADC0_AD5 {1 << 16, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} /// ADC_AD6 pin definition. #define PIN_ADC0_AD6 {1 << 17, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} /// ADC_AD7 pin definition. #define PIN_ADC0_AD7 {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} /// Pins ADC #define PINS_ADC PIN_ADC0_AD0, PIN_ADC0_AD1, PIN_ADC0_AD2, PIN_ADC0_AD3, PIN_ADC0_AD4, PIN_ADC0_AD5, PIN_ADC0_AD6, PIN_ADC0_AD7 /** UART pins (UTXD0 and URXD0) definitions, PA9,10. */ #define PINS_UART {0x00000600, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /// EBI #define PIN_EBI_DATA_BUS {0xFF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NRD {1 << 11, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NWE {1 << 8, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NCS0 {1 << 20, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_PSRAM_ADDR_BUS {0x3f00fff, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_PSRAM_NBS {1 << 7, PIOB, ID_PIOB, PIO_PERIPH_B, PIO_PULLUP}, \ {1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_A1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NCS1 {1 << 15, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD CS pin */ #define PIN_EBI_LCD_RS {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /* LCD RS pin */ #ifdef BOARD_REV_A /** LED #0 pin definition. */ #define PIN_LED_0 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} /** LED #1 pin definition. */ #define PIN_LED_1 {1 << 21, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} /** LED #2 pin definition. */ #define PIN_LED_2 {1 << 22, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} #endif #ifdef BOARD_REV_B /** LED #0 pin definition. */ #define PIN_LED_0 {1 << 19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} /** LED #1 pin definition. */ #define PIN_LED_1 {1 << 20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} /** LED #2 pin definition. */ #define PIN_LED_2 {1 << 20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} #endif /** List of all LEDs definitions. */ #define PINS_LEDS PIN_LED_0, PIN_LED_1, PIN_LED_2 /// MCI pins definition. #define PINS_MCI {0x1f8, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}, \ {1 << 3, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /// MCI pin Card Detect #define PIN_MCI_CD \ {AT91C_PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP} /** Push button #0 definition. Attributes = pull-up + debounce + interrupt on rising edge. */ #define PIN_PUSHBUTTON_1 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE} /** Push button #1 definition. Attributes = pull-up + debounce + interrupt on falling edge. */ #define PIN_PUSHBUTTON_2 {1 << 12, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE} /** List of all push button definitions. */ #define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2 /** Push button #1 index. */ #define PUSHBUTTON_BP1 0 /** Push button #2 index. */ #define PUSHBUTTON_BP2 1 /// Simulated joystick LEFT index. #define JOYSTICK_LEFT 0 /// Simulated joystick RIGHT index. #define JOYSTICK_RIGHT 1 /** PWMC PWM0 pin definition. */ #define PIN_PWMC_PWMH0 {1 << 18, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_PWMC_PWML0 {1 << 19, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} /** PWMC PWM1 pin definition. */ #define PIN_PWMC_PWMH1 {1 << 19, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_PWMC_PWML1 {1 << 20, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} /** PWMC PWM2 pin definition. */ #define PIN_PWMC_PWMH2 {1 << 20, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_PWMC_PWML2 {1 << 16, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} /** PWMC PWM3 pin definition. */ #define PIN_PWMC_PWMH3 {1 << 21, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_PWMC_PWML3 {1 << 15, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} /** PWM pin definition for LED0 */ #define PIN_PWM_LED0 PIN_PWMC_PWMH0, PIN_PWMC_PWML0 /** PWM pin definition for LED1 */ #define PIN_PWM_LED1 PIN_PWMC_PWMH2, PIN_PWMC_PWML2 /** PWM pin definition for LED2 */ #define PIN_PWM_LED2 PIN_PWMC_PWMH3, PIN_PWMC_PWML3 /** PWM channel for LED0 */ #define CHANNEL_PWM_LED0 0 /** PWM channel for LED1 */ #define CHANNEL_PWM_LED1 2 /** PWM channel for LED2 */ #define CHANNEL_PWM_LED2 3 /** SPI MISO pin definition. */ #define PIN_SPI_MISO {1 << 12, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /** SPI MOSI pin definition. */ #define PIN_SPI_MOSI {1 << 13, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /** SPI SPCK pin definition. */ #define PIN_SPI_SPCK {1 << 14, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /** SPI chip select pin definition. */ #define PIN_SPI_NPCS0_PA11 {1 << 11, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /** List of SPI pin definitions (MISO, MOSI & SPCK). */ #define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK /// SSC pins definition. #define PIN_SSC_TD {0x1 << 26, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_SSC_TK {0x1 << 28, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_SSC_TF {0x1 << 30, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PINS_SSC_CODEC PIN_SSC_TD, PIN_SSC_TK, PIN_SSC_TF /// PCK0 #define PIN_PCK0 {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} /// TWI pins definition. #define TWI_V3XX #define PIN_TWI_TWD0 {0x1 << 9, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_TWI_TWCK0 {0x1 << 10, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PINS_TWI0 PIN_TWI_TWD0, PIN_TWI_TWCK0 #define PIN_TWI_TWD1 {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_TWI_TWCK1 {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PINS_TWI1 PIN_TWI_TWD1, PIN_TWI_TWCK1 /// USART0 #define PIN_USART0_RXD {0x1 << 19, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART0_TXD {0x1 << 18, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART0_CTS {0x1 << 8, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART0_RTS {0x1 << 7, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART0_SCK {0x1 << 17, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} /// USART1 #define PIN_USART1_RXD {0x1 << 21, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART1_TXD {0x1 << 22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART1_CTS {0x1 << 25, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART1_RTS {0x1 << 24, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USART1_EN {0x1 << 23, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} /// USB VBus monitoring pin definition. #ifdef BOARD_REV_A #define PIN_USB_VBUS {1 << 23, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} #endif #ifdef BOARD_REV_B #define PIN_USB_VBUS {1 << 21, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} #endif //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \par sam3s_ek_extcomp "SAM3S-EK - External components" /// This page lists the definitions related to external on-board components /// located in the board.h file for the AT91SAM3S-EK. /// /// !AT45 Dataflash Card /// - BOARD_AT45_A_SPI_BASE /// - BOARD_AT45_A_SPI_ID /// - BOARD_AT45_A_SPI_PINS /// - BOARD_AT45_A_SPI /// - BOARD_AT45_A_NPCS /// - BOARD_AT45_A_NPCS_PIN /// /// !AT45 Dataflash (serial onboard DataFlash) /// - BOARD_AT45_B_SPI_BASE /// - BOARD_AT45_B_SPI_ID /// - BOARD_AT45_B_SPI_PINS /// - BOARD_AT45_B_SPI /// - BOARD_AT45_B_NPCS /// - BOARD_AT45_B_NPCS_PIN /// /// !AT26 Serial Flash /// - BOARD_AT26_A_SPI_BASE /// - BOARD_AT26_A_SPI_ID /// - BOARD_AT26_A_SPI_PINS /// - BOARD_AT26_A_SPI /// - BOARD_AT26_A_NPCS /// - BOARD_AT26_A_NPCS_PIN /// /// !SD Card /// - MCI2_INTERFACE /// - BOARD_SD_MCI_BASE /// - BOARD_SD_MCI_ID /// - BOARD_SD_PINS /// - BOARD_SD_SLOT /// /// !PSRAM /// - BOARD_PSRAM_PINS /// /// !LCD /// - BOARD_LCD_ILI9325 /// - BOARD_LCD_PINS /// - BOARD_BACKLIGHT_PIN /// - BOARD_LCD_BASE /// - BOARD_LCD_RS /// - BOARD_LCD_WIDTH /// - BOARD_LCD_HEIGHT /// /// !TouchScreen /// - BOARD_TSC_ADS7843 /// - PIN_TCS_IRQ /// - PIN_TCS_BUSY /// - BOARD_TSC_SPI_BASE /// - BOARD_TSC_SPI_ID /// - BOARD_TSC_SPI_PINS /// - BOARD_TSC_NPCS /// - BOARD_TSC_NPCS_PIN /// /// Base address of SPI peripheral connected to the dataflash. //#define BOARD_AT45_A_SPI_BASE SPI0 ///// Identifier of SPI peripheral connected to the dataflash. //#define BOARD_AT45_A_SPI_ID ID_SPI0 ///// Pins of the SPI peripheral connected to the dataflash. //#define BOARD_AT45_A_SPI_PINS PINS_SPI0 ///// Dataflahs SPI number. //#define BOARD_AT45_A_SPI 0 ///// Chip select connected to the dataflash. //#define BOARD_AT45_A_NPCS 3 ///// Chip select pin connected to the dataflash. //#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS3 /// Base address of SPI peripheral connected to the dataflash. //#define BOARD_AT45_B_SPI_BASE SPI1 ///// Identifier of SPI peripheral connected to the dataflash. //#define BOARD_AT45_B_SPI_ID ID_SPI1 ///// Pins of the SPI peripheral connected to the dataflash. //#define BOARD_AT45_B_SPI_PINS PINS_SPI1 ///// Dataflahs SPI number. //#define BOARD_AT45_B_SPI 1 ///// Chip select connected to the dataflash. //#define BOARD_AT45_B_NPCS 3 ///// Chip select pin connected to the dataflash. //#define BOARD_AT45_B_NPCS_PIN PIN_SPI1_NPCS3 /// Base address of SPI peripheral connected to the serialflash. //#define BOARD_AT26_A_SPI_BASE SPI0 ///// Identifier of SPI peripheral connected to the serialflash. //#define BOARD_AT26_A_SPI_ID ID_SPI0 ///// Pins of the SPI peripheral connected to the serialflash. //#define BOARD_AT26_A_SPI_PINS PINS_SPI0 ///// Serialflash SPI number. //#define BOARD_AT26_A_SPI 0 ///// Chip select connected to the serialflash. //#define BOARD_AT26_A_NPCS 3 ///// Chip select pin connected to the serialflash. //#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS3 /// ISO7816 /// - PIN_SMARTCARD_CONNECT /// - PIN_ISO7816_RSTMC /// - PINS_ISO7816 /// Smartcard detection pin //#define PIN_SMARTCARD_CONNECT {1 << 5, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} /// PIN used for reset the smartcard //#define PIN_ISO7816_RSTMC {1 << 7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} /// Pins used for connect the smartcard //#define PINS_ISO7816 PIN_USART0_TXD, PIN_USART0_SCK, PIN_ISO7816_RSTMC /// Dma channel number #define BOARD_MCI_DMA_CHANNEL 0 /// MCI0 DMA hardware handshaking ID #define DMA_HW_SRC_REQ_ID_MCI0 AT91C_HDMA_SRC_PER_0 #define DMA_HW_DEST_REQ_ID_MCI0 AT91C_HDMA_DST_PER_0 /// MCI1 DMA hardware handshaking ID #define DMA_HW_SRC_REQ_ID_MCI1 AT91C_HDMA_SRC_PER_13 #define DMA_HW_DEST_REQ_ID_MCI1 AT91C_HDMA_DST_PER_13 /// SD DMA hardware handshaking ID #define BOARD_SD_DMA_HW_SRC_REQ_ID DMA_HW_SRC_REQ_ID_MCI0 #define BOARD_SD_DMA_HW_DEST_REQ_ID DMA_HW_DEST_REQ_ID_MCI0 /// HS MCI interface #define MCI2_INTERFACE /// Base address of the MCI peripheral connected to the SD card. #define BOARD_SD_MCI_BASE MCI0//MCI ///// Peripheral identifier of the MCI connected to the SD card. #define BOARD_SD_MCI_ID ID_MCI0 //ID_MCI ///// MCI pins that shall be configured to access the SD card. #define BOARD_SD_PINS PINS_MCI ///// MCI slot to which the SD card is connected to. #define BOARD_SD_SLOT MCI_SD_SLOTA ///// MCI Card Detect pin. #define BOARD_SD_PIN_CD PIN_MCI_CD //#define BOARD_PSRAM_PINS PIN_EBI_DATA_BUS, PIN_EBI_NCS0, PIN_EBI_NRD, PIN_EBI_NWE, \ PIN_EBI_PSRAM_ADDR_BUS, PIN_EBI_PSRAM_NBS, PIN_EBI_A1 /** Indicates board has an ILI9325 external component to manage LCD. */ #define BOARD_LCD_ILI9325 /** LCD pins definition. */ #define BOARD_LCD_PINS PIN_EBI_DATA_BUS, PIN_EBI_NRD, PIN_EBI_NWE, \ PIN_EBI_NCS1, PIN_EBI_LCD_RS /** Backlight pin definition. */ #define BOARD_BACKLIGHT_PIN {1 << 13, PIOC, ID_PIOC, PIO_OUTPUT_0, PIO_DEFAULT} /** Define ILI9325 base address. */ #define BOARD_LCD_BASE 0x61000000 /** Define ILI9325 register select signal. */ #define BOARD_LCD_RS (1 << 1) /** Display width in pixels. */ #define BOARD_LCD_WIDTH 240 /** Display height in pixels. */ #define BOARD_LCD_HEIGHT 320 /** Indicates board has an ADS7843 external component to manage Touch Screen */ #define BOARD_TSC_ADS7843 #ifdef BOARD_REV_A /** Touchscreen controller IRQ pin definition. */ #define PIN_TCS_IRQ {PIO_PA4, PIOA, ID_PIOA, PIO_INPUT, PIO_DEBOUNCE | PIO_IT_AIME | PIO_IT_EDGE} #define PIN_TCS_IRQ_WUP_ID (1 << 3) /** Touchscreen controller Busy pin definition. */ #define PIN_TCS_BUSY {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP} #endif #ifdef BOARD_REV_B /** Touchscreen controller IRQ pin definition. */ #define PIN_TCS_IRQ {PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_DEBOUNCE | PIO_IT_AIME | PIO_IT_EDGE} #define PIN_TCS_IRQ_WUP_ID (1 << 15) /** Touchscreen controller Busy pin definition. */ #define PIN_TCS_BUSY {PIO_PA17, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP} #endif /** Base address of SPI peripheral connected to the touchscreen controller. */ #define BOARD_TSC_SPI_BASE SPI /** Identifier of SPI peripheral connected to the touchscreen controller. */ #define BOARD_TSC_SPI_ID ID_SPI /** Pins of the SPI peripheral connected to the touchscreen controller. */ #define BOARD_TSC_SPI_PINS PINS_SPI /** Chip select connected to the touchscreen controller. */ #define BOARD_TSC_NPCS 0 /** Chip select pin connected to the touchscreen controller. */ #define BOARD_TSC_NPCS_PIN PIN_SPI_NPCS0_PA11 //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \par sam3s_ek_mem "SAM3S-EK - Memories" /// This page lists definitions related to internal & external on-board memories. /// /// !Embedded Flash /// - BOARD_FLASH_EFC /// Internal SRAM address #define AT91C_ISRAM AT91C_IRAM #define AT91C_ISRAM_SIZE 0x00008000 #define AT91C_IFLASH_SIZE (0x40000) #define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH 0 Page Size: 256 bytes #define AT91C_IFLASH_NB_OF_PAGES (1024) // Internal FLASH 0 Number of Pages: 512 #define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH 0 Lock Region Size: 16 Kbytes #define AT91C_IFLASH_NB_OF_LOCK_BITS (16) // Internal FLASH 0 Number of Lock Bits: 16 //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \section sam3s_ek_extcomp "SAM3S-EK - External components" /// This page lists the definitions related to external on-board components /// located in the board.h file for the SAM3S-EK. /// //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ /// \par sam3s_ek_chipdef "SAM3S-EK - Individual chip definition" /// This page lists the definitions related to different chip's definition /// located in the board.h file for the SAM3S-EK. /// DBGU #define BOARD_DBGU_ID ID_DBGU /// Rtc #define BOARD_RTC_ID ID_RTC /// Twi eeprom #define BOARD_ID_TWI_EEPROM ID_TWI1 #define BOARD_BASE_TWI_EEPROM TWI1 #define BOARD_PINS_TWI_EEPROM PINS_TWI1 /// USART #define BOARD_PIN_USART_RXD PIN_USART1_RXD #define BOARD_PIN_USART_TXD PIN_USART1_TXD #define BOARD_PIN_USART_CTS PIN_USART1_CTS #define BOARD_PIN_USART_RTS PIN_USART1_RTS #define BOARD_PIN_USART_EN PIN_USART1_EN #define BOARD_USART_BASE USART1 #define BOARD_ID_USART ID_USART1 //------------------------------------------------------------------------------ #define PIN_EBI_NANDOE {1 << 9, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NANDWE {1 << 10, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NANDCLE {1 << 17, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NANDALE {1 << 16, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} #define PIN_EBI_NANDIO {0x000000FF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} /// Nandflash chip enable pin definition. #define BOARD_NF_CE_PIN {1 << 14, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} /// Nandflash ready/busy pin definition. #define BOARD_NF_RB_PIN {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP} /// Nandflash controller peripheral pins definition. #define PINS_NANDFLASH PIN_EBI_NANDIO, BOARD_NF_CE_PIN, BOARD_NF_RB_PIN, PIN_EBI_NANDOE, \ PIN_EBI_NANDWE, PIN_EBI_NANDCLE, PIN_EBI_NANDALE /// Address for transferring command bytes to the nandflash. #define BOARD_NF_COMMAND_ADDR 0x60400000 /// Address for transferring address bytes to the nandflash. #define BOARD_NF_ADDRESS_ADDR 0x60200000 /// Address for transferring data bytes to the nandflash. #define BOARD_NF_DATA_ADDR 0x60000000 #endif //#ifndef BOARD_H