© Semiconductor Components Industries, LLC, 2005
October, 2018 − Rev. 6
1 Publication Order Number:
MOCD217M/D
MOCD207M, MOCD208M,
MOCD211M, MOCD213M,
MOCD217M
8-pin SOIC Dual-Channel
Phototransistor Output
Optocoupler
These devices consist of two gallium arsenide infrared emitting
diodes optically coupled to two monolithic silicon phototransistor
detectors, in a surface mountable, small outline, plastic package. They
are ideally suited for high−density applications, and eliminate the need
for through−the−board mounting.
Features
• Closely Matched Current Transfer Ratios
• Minimum BVCEO of 70 V Guaranteed
– MOCD207M, MOCD208M, MOCD213M
• Minimum BVCEO of 30 V Guaranteed
– MOCD211M, MOCD217M
• Low LED Input Current Required for Easier Logic Interfacing
– MOCD217M
• Convenient Plastic SOIC−8 Surface Mountable Package Style, with
0.050′′ Lead Spacing
• Safety and Regulatory Approvals:
– UL1577, 2,500 VACRMS for 1 Minute
– DIN−EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage
• These are Pb−Free Devices
Applications
• Feedback Control Circuits
• Interfacing and Coupling Systems of Different Potentials and
Impedances
• General Purpose Switching Circuits
• Monitor and Detection Circuits
EMITTER 1
COLLECTOR 1ANODE 1
CATHODE 1
1
2
3
4 5
6
7
8
EMITTER 2
COLLECTOR 2ANODE 2
CATHODE 2
Figure 1. Schematic
SOIC8
M SUFFIX
CASE 751DZ
www.onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
ORDERING INFORMATION
1
6
43 5
SYYX
2D207
MARKING DIAGRAM
1 − Logo
2 − Device Number
3 − DIN EN/IEC60747−5−5 Option (only appears
on component ordered with this option)
4 − One−Digit Year Code, e.g., “4”
5 − Digit Work Week, Ranging from “01” to “53”
6 − Assembly Package Code
V
October, 2018 − Rev. 6
1 Publication Order Number:
MOCD217M/D
MOCD207M, MOCD208M,
MOCD211M, MOCD213M,
MOCD217M
8-pin SOIC Dual-Channel
Phototransistor Output
Optocoupler
These devices consist of two gallium arsenide infrared emitting
diodes optically coupled to two monolithic silicon phototransistor
detectors, in a surface mountable, small outline, plastic package. They
are ideally suited for high−density applications, and eliminate the need
for through−the−board mounting.
Features
• Closely Matched Current Transfer Ratios
• Minimum BVCEO of 70 V Guaranteed
– MOCD207M, MOCD208M, MOCD213M
• Minimum BVCEO of 30 V Guaranteed
– MOCD211M, MOCD217M
• Low LED Input Current Required for Easier Logic Interfacing
– MOCD217M
• Convenient Plastic SOIC−8 Surface Mountable Package Style, with
0.050′′ Lead Spacing
• Safety and Regulatory Approvals:
– UL1577, 2,500 VACRMS for 1 Minute
– DIN−EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage
• These are Pb−Free Devices
Applications
• Feedback Control Circuits
• Interfacing and Coupling Systems of Different Potentials and
Impedances
• General Purpose Switching Circuits
• Monitor and Detection Circuits
EMITTER 1
COLLECTOR 1ANODE 1
CATHODE 1
1
2
3
4 5
6
7
8
EMITTER 2
COLLECTOR 2ANODE 2
CATHODE 2
Figure 1. Schematic
SOIC8
M SUFFIX
CASE 751DZ
www.onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
ORDERING INFORMATION
1
6
43 5
SYYX
2D207
MARKING DIAGRAM
1 − Logo
2 − Device Number
3 − DIN EN/IEC60747−5−5 Option (only appears
on component ordered with this option)
4 − One−Digit Year Code, e.g., “4”
5 − Digit Work Week, Ranging from “01” to “53”
6 − Assembly Package Code
V
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
2
Safety and Insulation Ratings
As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter Characteristics
Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated
Mains Voltage
< 150 VRMS I−IV
< 300 VRMS I−III
Climatic Classification 55/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
Comparative Tracking Index 175
Symbol Parameter Value Unit
VPR Input−to−Output Test Voltage, Method A, VIORM x 1.6 = VPR ,
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
904 Vpeak
Input−to−Output Test Voltage, Method B, VIORM x 1.875 = VPR ,
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
1060 Vpeak
VIORM Maximum Working Insulation Voltage 565 Vpeak
VIOTM Highest Allowable Over−Voltage 4000 Vpeak
External Creepage ≥4 mm
External Clearance ≥4 mm
DTI Distance Through Insulation (Insulation Thickness) ≥0.4 mm
TS Case Temperature (Note 1) 150 °C
IS,INPUT Input Current (Note 1) 200 mA
PS,OUTPUT Output Current (Note 1) 300 mW
R IO Insulation Resistance at TS , VIO = 500 V (Note 1) >109
1. Safety limit values – maximum values allowed in the event of a failure.
www.onsemi.com
2
Safety and Insulation Ratings
As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter Characteristics
Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated
Mains Voltage
< 150 VRMS I−IV
< 300 VRMS I−III
Climatic Classification 55/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
Comparative Tracking Index 175
Symbol Parameter Value Unit
VPR Input−to−Output Test Voltage, Method A, VIORM x 1.6 = VPR ,
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
904 Vpeak
Input−to−Output Test Voltage, Method B, VIORM x 1.875 = VPR ,
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
1060 Vpeak
VIORM Maximum Working Insulation Voltage 565 Vpeak
VIOTM Highest Allowable Over−Voltage 4000 Vpeak
External Creepage ≥4 mm
External Clearance ≥4 mm
DTI Distance Through Insulation (Insulation Thickness) ≥0.4 mm
TS Case Temperature (Note 1) 150 °C
IS,INPUT Input Current (Note 1) 200 mA
PS,OUTPUT Output Current (Note 1) 300 mW
R IO Insulation Resistance at TS , VIO = 500 V (Note 1) >109
1. Safety limit values – maximum values allowed in the event of a failure.
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
3
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol Rating Value Unit
TOTAL DEVICE
TSTG Storage Temperature −40 to +125 °C
TA Ambient Operating Temperature −40 to +100 °C
TJ Junction Temperature −40 to +125 °C
TSOL Lead Solder Temperature 260 for 10 seconds °C
PD Total Device Power Dissipation @ TA = 25°C 240 mW
Derate Above 25°C 2.94 mW/°C
EMITTER
IF Continuous Forward Current 60 mA
IF (pk) Forward Current – Peak (PW = 100 s, 120 pps) 1.0 A
VR Reverse Voltage 6.0 V
PD LED Power Dissipation @ TA = 25°C 90 mW
Derate Above 25°C 0.8 mW/°C
DETECTOR
IC Continuous Collector Current 150 mA
VCEO Collector−Emitter Voltage
− MOCD207M, MOCD208M, MOCD213M
70 V
− MOCD211M, MOCD217M 30 V
VECO Emitter−Collector Voltage 7 V
PD Detector Power Dissipation @ TA = 25°C 150 mW
Derate Above 25°C 1.76 mW/°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
www.onsemi.com
3
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol Rating Value Unit
TOTAL DEVICE
TSTG Storage Temperature −40 to +125 °C
TA Ambient Operating Temperature −40 to +100 °C
TJ Junction Temperature −40 to +125 °C
TSOL Lead Solder Temperature 260 for 10 seconds °C
PD Total Device Power Dissipation @ TA = 25°C 240 mW
Derate Above 25°C 2.94 mW/°C
EMITTER
IF Continuous Forward Current 60 mA
IF (pk) Forward Current – Peak (PW = 100 s, 120 pps) 1.0 A
VR Reverse Voltage 6.0 V
PD LED Power Dissipation @ TA = 25°C 90 mW
Derate Above 25°C 0.8 mW/°C
DETECTOR
IC Continuous Collector Current 150 mA
VCEO Collector−Emitter Voltage
− MOCD207M, MOCD208M, MOCD213M
70 V
− MOCD211M, MOCD217M 30 V
VECO Emitter−Collector Voltage 7 V
PD Detector Power Dissipation @ TA = 25°C 150 mW
Derate Above 25°C 1.76 mW/°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
4
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol Parameter Device Test Conditions Min Typ Max Unit
EMITTER
VF Input Forward Voltage MOCD217M IF = 1 mA − 1.05 1.3 V
MOCD213M IF = 10 mA − 1.15 1.5 V
MOCD207M,
MOCD208M,
MOCD211M
IF = 30 mA − 1.25 1.5 V
IR Reverse Leakage Current All VR = 6 V − 0.001 100 A
C IN Input Capacitance All − 18 − pF
DETECTOR
ICEO Collector−Emitter Dark Current All VCE = 10 V, TA = 25°C − 1.0 50 nA
VCE = 10 V, TA = 100°C − 1.0 − A
BVCEO Collector−Emitter Breakdown
Voltage
MOCD211M,
MOCD217M
IC = 100 A 30 100 − V
MOCD207M,
MOCD208M,
MOCD213M
IC = 100 A 70 100 − V
BVECO Emitter−Collector Breakdown
Voltage
All IE = 100 A 7 10 − V
C CE Collector−Emitter Capacitance All f = 1.0 MHz, VCE = 0 − 7 − pF
COUPLED
CTR Collector−Output Current MOCD207M IF = 10 mA, VCE = 5 V 100 − 200 %
MOCD208M IF = 10 mA, VCE = 5 V 40 − 125 %
MOCD211M IF = 10 mA, VCE = 5 V 20 − − %
MOCD213M IF = 10 mA, VCE = 5 V 100 − − %
MOCD217M IF = 1 mA, VCE = 5 V 100 − − %
VCE(SAT) Collector−Emitter Saturation
Voltage
MOCD207M,
MOCD208M,
MOCD211M,
MOCD213M
IC = 2 mA, IF = 10 mA − − 0.4 V
MOCD217M IC = 100 A, IF = 1 mA − − 0.4 V
ton Turn−On Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 7.5 − s
toff Turn−Off Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 5.7 − s
tr Rise Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 3.2 − s
tf Fall Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 4.7 − s
ISOLATION
VISO Input−Output Isolation Voltage All t = 1 Minute 2500 − − VACRMS
C ISO Isolation Capacitance All VI−O = 0 V, f = 1 MHz − 0.2 − pF
R ISO Isolation Resistance All VI−O = ±500 VDC, TA = 25°C 1011 − −
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
4
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol Parameter Device Test Conditions Min Typ Max Unit
EMITTER
VF Input Forward Voltage MOCD217M IF = 1 mA − 1.05 1.3 V
MOCD213M IF = 10 mA − 1.15 1.5 V
MOCD207M,
MOCD208M,
MOCD211M
IF = 30 mA − 1.25 1.5 V
IR Reverse Leakage Current All VR = 6 V − 0.001 100 A
C IN Input Capacitance All − 18 − pF
DETECTOR
ICEO Collector−Emitter Dark Current All VCE = 10 V, TA = 25°C − 1.0 50 nA
VCE = 10 V, TA = 100°C − 1.0 − A
BVCEO Collector−Emitter Breakdown
Voltage
MOCD211M,
MOCD217M
IC = 100 A 30 100 − V
MOCD207M,
MOCD208M,
MOCD213M
IC = 100 A 70 100 − V
BVECO Emitter−Collector Breakdown
Voltage
All IE = 100 A 7 10 − V
C CE Collector−Emitter Capacitance All f = 1.0 MHz, VCE = 0 − 7 − pF
COUPLED
CTR Collector−Output Current MOCD207M IF = 10 mA, VCE = 5 V 100 − 200 %
MOCD208M IF = 10 mA, VCE = 5 V 40 − 125 %
MOCD211M IF = 10 mA, VCE = 5 V 20 − − %
MOCD213M IF = 10 mA, VCE = 5 V 100 − − %
MOCD217M IF = 1 mA, VCE = 5 V 100 − − %
VCE(SAT) Collector−Emitter Saturation
Voltage
MOCD207M,
MOCD208M,
MOCD211M,
MOCD213M
IC = 2 mA, IF = 10 mA − − 0.4 V
MOCD217M IC = 100 A, IF = 1 mA − − 0.4 V
ton Turn−On Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 7.5 − s
toff Turn−Off Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 5.7 − s
tr Rise Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 3.2 − s
tf Fall Time All IC = 2 mA, VCC = 10 V,
R L = 100 (Figure 7)
− 4.7 − s
ISOLATION
VISO Input−Output Isolation Voltage All t = 1 Minute 2500 − − VACRMS
C ISO Isolation Capacitance All VI−O = 0 V, f = 1 MHz − 0.2 − pF
R ISO Isolation Resistance All VI−O = ±500 VDC, TA = 25°C 1011 − −
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
5
TYPICAL CHARACTERISTICS
Figure 2. LED Forward Voltage vs. Forward
Current
Figure 3. Output Current vs. Input Current
Figure 4. Output Current vs. Ambient
Temperature
Figure 5. Output Current vs. Collector−Emitter
Voltage
Figure 6. Dark Current vs. Ambient
Temperature
I F – LED INPUT CURRENT (mA)
0.1 1 10 100
I C – OUTPUT COLLECTOR CURRENT (NORMALIZED)
0.01
0.1
1
10
V CE = 5 V
NORMALIZED TO I F = 10 mA
T A – AMBIENT TEMPERATURE (C)
−80 −60 −40 −20 0 20 40 60 80 100 120
I C – OUTPUT COLLECTOR CURRENT (NORMALIZED)
0.1
1
10
NORMALIZED TO TA = 25C
V CE – COLLECTOR−EMITTER VOLTAGE (V)
0
I C – OUTPUT COLLECTOR CURRENT (NORMALIZED)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
IF = 10 mA
NORMALIZED TO VCE = 5 V
TA – AMBIENT TEMPERATURE ( C)
0 20 40 60 80 100
I CEO – COLLECTOR −EMITTER DARK CURRENT (nA)
0.1
1
10
100
1000
10000
V CE = 10 V
IF – LED FORWARD CURRENT (mA)
V F – FORWARD VOLTAGE (V)
1 10 100
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
T A = –55C
T A = 25C
T A = 100C
1 2 3 4 5 6 7 8 9 10
www.onsemi.com
5
TYPICAL CHARACTERISTICS
Figure 2. LED Forward Voltage vs. Forward
Current
Figure 3. Output Current vs. Input Current
Figure 4. Output Current vs. Ambient
Temperature
Figure 5. Output Current vs. Collector−Emitter
Voltage
Figure 6. Dark Current vs. Ambient
Temperature
I F – LED INPUT CURRENT (mA)
0.1 1 10 100
I C – OUTPUT COLLECTOR CURRENT (NORMALIZED)
0.01
0.1
1
10
V CE = 5 V
NORMALIZED TO I F = 10 mA
T A – AMBIENT TEMPERATURE (C)
−80 −60 −40 −20 0 20 40 60 80 100 120
I C – OUTPUT COLLECTOR CURRENT (NORMALIZED)
0.1
1
10
NORMALIZED TO TA = 25C
V CE – COLLECTOR−EMITTER VOLTAGE (V)
0
I C – OUTPUT COLLECTOR CURRENT (NORMALIZED)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
IF = 10 mA
NORMALIZED TO VCE = 5 V
TA – AMBIENT TEMPERATURE ( C)
0 20 40 60 80 100
I CEO – COLLECTOR −EMITTER DARK CURRENT (nA)
0.1
1
10
100
1000
10000
V CE = 10 V
IF – LED FORWARD CURRENT (mA)
V F – FORWARD VOLTAGE (V)
1 10 100
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
T A = –55C
T A = 25C
T A = 100C
1 2 3 4 5 6 7 8 9 10
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
6
SWITCHING TIME TEST CIRCUIT AND WAVEFORMS
Figure 7. Switching Time Test Circuit and Waveforms
OUTPUT PULSE
INPUT PULSE
tr tf
INPUT
I F R L
R BE
V CC = 10 V
OUTPUT
ton
10%
90%
toff
I C
Adjust IF to produce IC = 2 mA
REFLOW PROFILE
Figure 8. Reflow Profile
Time (seconds)
Temperature (C)
Time 25°C to Peak
260
240
220
200
180
160
140
120
100
80
60
40
20
0
T L
ts
tL
t P
T P
Tsmax
Tsmin
120
Preheat Area
Max. Ramp−up Rate = 3°C/S
Max. Ramp−down Rate = 6°C/S
240 360
Profile Feature Pb−Free Assembly Profile
Temperature Minimum (Tsmin) 150°C
Temperature Maximum (Tsmax) 200°C
Time (tS ) from (Tsmin to Tsmax) 60 − 120 seconds
Ramp−up Rate (tL to tP ) 3°C/second maximum
Liquidous Temperature (TL ) 217°C
Time (tL ) Maintained Above (TL ) 60 − 150 seconds
Peak Body Package Temperature 260°C +0°C / –5°C
Time (tP ) within 5°C of 260°C 30 seconds
Ramp−down Rate (TP to TL ) 6°C/second maximum
Time 25°C to Peak Temperature 8 minutes maximum
www.onsemi.com
6
SWITCHING TIME TEST CIRCUIT AND WAVEFORMS
Figure 7. Switching Time Test Circuit and Waveforms
OUTPUT PULSE
INPUT PULSE
tr tf
INPUT
I F R L
R BE
V CC = 10 V
OUTPUT
ton
10%
90%
toff
I C
Adjust IF to produce IC = 2 mA
REFLOW PROFILE
Figure 8. Reflow Profile
Time (seconds)
Temperature (C)
Time 25°C to Peak
260
240
220
200
180
160
140
120
100
80
60
40
20
0
T L
ts
tL
t P
T P
Tsmax
Tsmin
120
Preheat Area
Max. Ramp−up Rate = 3°C/S
Max. Ramp−down Rate = 6°C/S
240 360
Profile Feature Pb−Free Assembly Profile
Temperature Minimum (Tsmin) 150°C
Temperature Maximum (Tsmax) 200°C
Time (tS ) from (Tsmin to Tsmax) 60 − 120 seconds
Ramp−up Rate (tL to tP ) 3°C/second maximum
Liquidous Temperature (TL ) 217°C
Time (tL ) Maintained Above (TL ) 60 − 150 seconds
Peak Body Package Temperature 260°C +0°C / –5°C
Time (tP ) within 5°C of 260°C 30 seconds
Ramp−down Rate (TP to TL ) 6°C/second maximum
Time 25°C to Peak Temperature 8 minutes maximum
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
7
ORDERING INFORMATION
Part Number Package Shipping
MOCD207M Small Outline 8−Pin 100 Units / Tube
MOCD207R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD207VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD207R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD208M Small Outline 8−Pin 100 Units / Tube
MOCD208R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD208VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD208R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD211M Small Outline 8−Pin 100 Units / Tube
MOCD211R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD211VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD211R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD213M Small Outline 8−Pin 100 Units / Tube
MOCD213R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD213VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD213R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD217M Small Outline 8−Pin 100 Units / Tube
MOCD217R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD217VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD217R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
www.onsemi.com
7
ORDERING INFORMATION
Part Number Package Shipping
MOCD207M Small Outline 8−Pin 100 Units / Tube
MOCD207R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD207VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD207R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD208M Small Outline 8−Pin 100 Units / Tube
MOCD208R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD208VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD208R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD211M Small Outline 8−Pin 100 Units / Tube
MOCD211R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD211VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD211R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD213M Small Outline 8−Pin 100 Units / Tube
MOCD213R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD213VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD213R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD217M Small Outline 8−Pin 100 Units / Tube
MOCD217R2M Small Outline 8−Pin 2500 Units / Tape & Reel
MOCD217VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube
MOCD217R2VM Small Outline 8−Pin, DIN EN/IEC60747−5−5 Option 2500 Units / Tape & Reel
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
8
PACKAGE DIMENSIONS
SOIC8
CASE 751DZ
ISSUE O
www.onsemi.com
8
PACKAGE DIMENSIONS
SOIC8
CASE 751DZ
ISSUE O
MOCD207M, MOCD208M, MOCD211M, MOCD213M, MOCD217M
www.onsemi.com
9
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
MOCD217M/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
◊
www.onsemi.com
9
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
MOCD217M/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
◊