ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP214' ), '1' );
FILE_NAME ('70779_C.STEP', '2021-09-02T17:46:53', ( '' ), ( '' ), 'SwSTEP 2.0', 'SolidWorks 2020', '' );
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
ENDSEC;
DATA;
#5 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
#6 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#12 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999897 ), #330 );
#39 =( CONVERSION_BASED_UNIT ( 'INCH', #12 ) LENGTH_UNIT ( ) NAMED_UNIT ( #5 ) );
#40 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #39, 'distance_accuracy_value', 'NONE');
#68 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#70 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #40 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #39, #68, #6 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#330 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
#1800 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #23515, #17175 ) ;
#4086 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #19358 ) ) ;
#5112 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #7121 ) ;
#7121 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#8387 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
#9499 = PRODUCT_CONTEXT ( 'NONE', #7121, 'mechanical' ) ;
#13968 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1800 ) ;
#17175 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #8387, 'design' ) ;
#19358 = PRODUCT ( '70779_C', '70779_C', '', ( #9499 ) ) ;
#23515 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #19358, .NOT_KNOWN. ) ;
#24699 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #8387 ) ;
ENDSEC;
END-ISO-10303-21;