ERPOUT              Enter the transmit Effective Radiated Power (ERP) for the   talk-out system.  This is usually the ERP (transmitter      output less losses plus transmit antenna gain) for the base station, repeater, etc.                                                                                                 
ANTGNO              Enter the receiver antenna gain (dBd) for the talk-out      system.  This is usually the gain for the mobile or handheldreceive antenna.                                                                                                        
LOSOUT              Enter the transmission line loss for the receiver in the    talk-out system.  This is usually the line loss associated  with a mobile receive antenna.                                                                                          
VOLOUT              Enter the desired voltage (æV) at the input terminals to thereceiver in the talk-out system.  This is usually the       manufacturer's voltage specification for a mobile or        handheld receiver, plus any additional margin you want builtinto your system.                                                                                                       
FLDOUT              Enter the field strength (dBu) you have determined is       necessary for adequate talk-out for the system.  The        talk-back area will be determined based on this value and   the overall system gain and loss differences.  (For a more  detailed discussion, see the TAP User's manual.)                                                                        
ERPBCK              Enter the transmit Effective Radiated Power (ERP) for the   talk-back system.  This is usually the ERP (transmitter     output, less losses, plus transmit antenna gain) for the    mobile or handheld unit.                                                                                                
ANTGNB              Enter the receiver antenna gain (dBd) for the talk-back     system.  This is usually the gain for the base station or   repeater receive antenna.                                                                                               
LOSBCK              Enter the transmission line loss for the receiver in the    talk-back system.  This is usually the line loss associated with the base station or repeater receive antenna.                                                                      
VOLBCK              Enter the desired voltage (æV) at the input terminals to thereceiver in the talk-back system.  This is usually the      manufacturer's voltage specification for the base station orrepeater receiver, plus any additional margin you want builtinto your system.                                                                                                       
