Index of /internal/projects/600024.Dorado/Multibeam/Complete Vehicle Assembly

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]Hex Screw_AI.sldprt2002-09-26 14:04 134K 
[ ]Acorn Low Crown Nut_AI.SLDPRT2002-09-26 14:04 185K 
[ ]Heavy Hex Jam Nut_AI.sldprt2002-09-26 14:04 185K 
[ ]Flat Washer Type A Selected Wide_AI.sldprt2002-09-26 14:04 80K 
[ ]BOLT 5_16 X 2.25.SLDPRT2003-02-04 11:47 140K 
[ ]PROFILE TENSION BAND.SLDPRT2003-02-04 11:47 333K 
[ ]RETAINER TENSION BAND.SLDPRT2003-02-04 11:47 255K 
[ ]T-BOLT TENSION BAND.SLDPRT2003-02-04 11:47 212K 
[ ]HEX INSERT .312-18.SLDPRT2003-02-04 11:47 156K 
[ ]SLOTTED TAB, CAP SCREW.SLDPRT2003-02-04 11:47 187K 
[ ]Male Tab.SLDPRT2003-02-04 11:47 157K 
[ ]Mapping PV BlankEnd.SLDPRT2003-02-04 11:48 542K 
[ ]Mapping PV revB.SLDPRT2003-02-04 11:48 1.2M 
[ ]NUTS ANSI B18.6.3.SLDPRT2003-02-04 11:48 343K 
[ ]FLAT HEAD SCREW.SLDPRT2003-02-07 16:57 312K 
[ ]TC2158 Inner Vol.SLDPRT2003-02-10 13:06 86K 
[ ]Inner Volume.SLDPRT2003-02-10 17:50 126K 
[ ]compressin brace.SLDPRT2003-02-11 08:52 157K 
[ ]FRONT SLOTTED TAB.SLDPRT2003-02-11 08:52 248K 
[ ]EDGETECH DW-216 HYDROPHONE.SLDPRT2003-02-11 16:40 665K 
[ ]EDGETECH DW-216 JUNCTION BOX.SLDPRT2003-02-13 16:14 210K 
[ ]Spring_towhook.SLDPRT2003-03-14 12:09 269K 
[ ]NUT, HEX, MACHINE, .31.SLDPRT2003-03-25 11:50 194K 
[ ]SLOTTED NUT.SLDPRT2003-03-25 11:50 190K 
[ ]WASHER 5_16.SLDPRT2003-03-25 11:50 120K 
[ ]SWING WASHER.SLDPRT2003-03-25 16:17 155K 
[ ]FLAT WASHERS (U.S.).SLDPRT2003-03-26 13:13 431K 
[ ]SOCKET HEAD CAP SCREWS (U.S.).SLDPRT2003-03-26 18:22 1.8M 
[ ]SHOULDER SCREW .25-20 .4375L .25S.SLDPRT2003-03-27 14:27 283K 
[ ]SHELL INSERT RING.SLDPRT2003-03-27 14:47 346K 
[ ]PLANE BUSHING.SLDPRT2003-03-27 14:47 168K 
[ ]0 PARALLEL SHELL MOLD.SLDPRT2003-03-27 14:50 108K 
[ ]HEX FLANGED INSERTRevB.SLDPRT2003-03-27 17:26 222K 
[ ]SCREW BTN HD .190-24UNC-2A X .75L.SLDPRT2003-03-31 11:36 243K 
[ ]Flat Washer Type A Narrow_AI.sldprt2003-03-31 15:15 216K 
[ ]Hex Finished Bolt_AI.SLDPRT2003-03-31 15:15 334K 
[ ]EDGETECH DW-216.SLDPRT2003-03-31 15:43 264K 
[ ]Flat Washer Type A Wide_AI.sldprt2003-03-31 15:51 77K 
[ ]JamNut75020.SLDPRT2003-03-31 17:30 268K 
[ ]Connector, Seacon MINM-LONG-FCR.SLDPRT2003-03-31 17:30 242K 
[ ]MINK_penetrator.SLDPRT2003-03-31 17:30 360K 
[ ]RUBBER WELL NUT.SLDPRT2003-04-01 14:22 240K 
[ ]KEY .75SQ.SLDPRT2003-04-01 14:22 496K 
[ ]#4 Dorn Dales Version Body.SLDPRT2003-04-02 14:21 128K 
[ ]THREADED ROD.SLDPRT2003-04-07 13:13 165K 
[ ]MapHousing.SLDPRT2003-04-07 13:13 783K 
[ ]TC2158.SLDPRT2003-04-07 15:44 472K 
[ ]End Plate Mk2.SLDPRT2003-04-07 17:08 278K 
[ ]LiftHook.SLDPRT2003-04-07 17:09 230K 
[ ]Hex Bolt_AI.SLDPRT2003-04-07 17:18 316K 
[ ]COMPRESSION RING.SLDPRT2003-04-07 17:25 1.5M 
[ ]1 PARALLEL SHELL FLANGE BASE PART.SLDPRT2003-04-07 17:44 193K 
[ ]comptest.SLDPRT2003-04-07 18:06 40K 
[ ]REMOVABLE NOSE BAYONET INSERT.SLDPRT2003-04-07 18:09 467K 
[ ]Flat Washer Type B Regular_AI.sldprt2003-04-07 18:09 221K 
[ ]Sonar Extension bar.SLDPRT2003-04-07 18:09 141K 
[ ]Threaded Rod for Nose Foam.SLDPRT2003-04-07 18:09 109K 
[ ]Hex Nut_AI.sldprt2003-04-07 18:09 332K 
[ ]Spacer, Fwd Blkhd.SLDPRT2003-04-07 18:09 137K 
[ ]Modified Sonar Ring Clamp2.SLDPRT2003-04-07 18:09 185K 
[ ]Sonar Clamp2.SLDPRT2003-04-07 18:09 84K 
[ ]Latch Pin.SLDPRT2003-04-07 18:09 129K 
[ ]INSERT, HEX FLANGED, .250-20UNC X .38L.SLDPRT2003-04-07 18:09 272K 
[ ]SCREW, .375 NOM SLDR, .250-20UNC X .44L .SLDPRT2003-04-07 18:09 393K 
[ ]Port Nose Rail Bottom RmvblNose.SLDPRT2003-04-07 18:09 337K 
[ ]1x1x.125FibrglsAngle.SLDPRT2003-04-07 18:09 193K 
[ ]Socket Countersunk Head Cap Screw_AI.SLDPRT2003-04-07 18:09 380K 
[ ]Yardley.Shrpsert.Flng..25.20.SLDPRT2003-04-07 18:09 82K 
[ ]ImpulseLPBH-7-MP.SLDPRT2003-04-07 18:09 209K 
[ ]ImpulseLPIL-7-FS.SLDPRT2003-04-07 18:09 193K 
[ ]JamNut437520.SLDPRT2003-04-07 18:09 265K 
[ ]ImpulseLPBH-4-MP.SLDPRT2003-04-07 18:09 194K 
[ ]ImpulseLPIL-4-FS.SLDPRT2003-04-07 18:09 149K 
[ ]Altmtr[1].PSA-916.SLDPRT2003-04-07 18:10 528K 
[ ]Spacer, Battery Mount.SLDPRT2003-04-07 18:10 154K 
[ ]angle.SLDPRT2003-04-07 19:03 118K 
[ ]BRACE TOP, PARALLEL FRAME.SLDPRT2003-04-07 19:45 387K 
[ ]PV Bulkhead Bracket.SLDPRT2003-04-08 08:02 218K 
[ ]C-CHANNEL.SLDPRT2003-04-08 08:25 469K 
[ ]Machine Screw Nut Hex_AI.sldprt2003-04-08 08:30 609K 
[ ]FLANGE, PARALLEL, BOTTOM.sldasm2003-04-08 08:37 150K 
[ ]FLANGE, PARALLEL, TOP.sldasm2003-04-08 08:37 231K 
[ ]Fairing Assembly.SLDASM2003-04-08 08:37 713K 
[ ]MUCK UP FOAM INSERT.SLDPRT2003-04-22 17:41 157K 
[ ]Foam Under PV.SLDPRT2003-04-23 10:56 81K 
[ ]TOP PARALLEL SHELL.SLDPRT2003-04-23 10:56 466K 
[ ]BOTTOM PARALLEL SHELL FLANGE.SLDPRT2003-04-23 10:56 263K 
[ ]IMPULSE CONNECTOR.SLDPRT2003-04-23 10:56 293K 
[ ]SHELL INSERT RING MKII_002.SLDPRT2003-04-23 10:56 542K 
[ ]Muckup MKII_reservoir on back.SLDPRT2003-04-23 10:56 907K 
[ ]FLANGED BUSHING.SLDPRT2003-04-23 10:56 348K 
[ ]INSERT MOUNT.SLDPRT2003-04-23 10:56 163K 
[ ]SBP Foam.SLDPRT2003-04-23 10:56 528K 
[ ]Lower Foam.SLDPRT2003-04-23 10:56 428K 
[ ]C-CHANNEL, MIRROR.SLDPRT2003-04-23 10:56 263K 
[ ]KEY ASSEMBLY WATER.SLDPRT2003-04-23 10:56 505K 
[ ]1 PARALLEL SHELL BASE PART.SLDPRT2003-04-23 10:57 155K 
[ ]Upper foam.SLDPRT2003-04-23 11:47 3.1M 
[ ]Lock. Latch.SLDPRT2003-04-29 09:46 194K 
[ ]REMOVABLE NOSE FORE INSERT RING QUARTER.SLDPRT2003-04-30 17:41 436K 
[ ]Latch.Lock.Assy.SLDASM2003-04-30 17:41 144K 
[ ]Lock Washer Spring Regular_AI.sldprt2003-04-30 17:41 329K 
[ ]Stbd Nose Rail Bottom RmvblNose.SLDPRT2003-04-30 17:41 356K 
[ ]EDGETECH SONAR MOUNT.SLDPRT2003-05-01 16:37 439K 
[ ]Bottom Bulkheads Mk2.SLDPRT2003-05-01 16:37 2.9M 
[ ]EDGETECH CHIRP.SLDPRT2003-05-01 16:37 390K 
[ ]Mount Plate.SLDPRT2003-05-01 16:37 447K 
[ ]Latch.Multibeam.SLDPRT2003-05-02 10:17 214K 
[ ]Socket Head Cap Screw_AI.SLDPRT2003-05-02 12:25 1.7M 
[ ]MultiBeam AUV Towhook.SLDPRT2003-05-06 12:17 451K 
[ ]Junction Box, Multibeam.SLDPRT2003-05-07 10:04 423K 
[ ]1 PARALLEL SHELL FLANGE TOP PART.SLDPRT2003-05-09 11:29 334K 
[ ]5_16-18UNC SCREW ASSY.SLDASM2003-05-21 10:43 240K 
[ ]Lift Beam.SLDASM2003-05-21 10:43 350K 
[ ]MapHousingAssem.SLDASM2003-05-21 10:43 455K 
[ ]TC2158.SLDASM2003-05-21 10:43 198K 
[ ]bulkhead bracket fasteners.SLDASM2003-05-21 10:43 154K 
[ ]KEY ASSEMBLY.SLDASM2003-05-21 10:43 451K 
[ ]Swing Washer fastner assembly.SLDASM2003-05-21 10:43 116K 
[ ]Rails.SLDASM2003-05-21 10:43 2.0M 
[ ]Center. mid. Battery Support.SLDPRT2003-05-23 12:47 304K 
[ ]Stbd.TowHook.Brkt.SLDPRT2003-05-23 12:47 1.3M 
[ ]Bulkhead Retaining wedge.SLDPRT2003-05-23 12:47 156K 
[ ]shroud, acrylic.SLDPRT2003-05-23 12:47 201K 
[ ]Fiberglass Extrusion.SLDPRT2003-05-23 12:47 200K 
[ ]Fiberglass Extrusion.STBD.SLDPRT2003-05-23 12:47 199K 
[ ]Urethane Potting.SLDPRT2003-05-23 12:47 147K 
[ ]Junction Box Assy, Multibeam.SLDASM2003-05-23 12:47 807K 
[ ]Bracket, CTD.SLDPRT2003-05-23 12:47 418K 
[ ]Clamp, CDT, 6kwh.SLDPRT2003-05-23 12:47 207K 
[ ]End Plate, Battery.SLDPRT2003-05-23 12:47 410K 
[ ]Battery Support, Bottom.SLDPRT2003-05-23 12:47 411K 
[ ]Bulkhead, Aft.SLDPRT2003-05-23 12:47 568K 
[ ]Bulkhead, Fwd.SLDPRT2003-05-23 12:47 504K 
[ ]2KWhrBattery.SLDPRT2003-05-23 12:47 765K 
[ ]SeaBirdSBE 49FastCat.SLDPRT2003-05-23 12:47 770K 
[ ]UPPER FRAME, PARALLEL SECTION.SLDASM2003-05-27 12:31 924K 
[ ]Muck up interface.SLDASM2003-05-27 12:31 624K 
[ ]TENSION BAND ASSEMBLY.SLDASM2003-05-27 12:31 450K 
[ ]CLAMP-RIM ASSEMBLY.SLDASM2003-05-27 12:31 1.9M 
[ ]RIM WELDMENT.SLDASM2003-05-27 12:31 1.6M 
[ ]Clipped Fwd Nose TOP.SLDPRT2003-05-28 15:20 704K 
[ ]Foam, Fwd NOSE LOWER.SLDPRT2003-05-29 14:12 330K 
[ ]Foam, Nose SectionStbd.TOP.SLDPRT2003-05-29 14:12 400K 
[ ]Foam, Nose Section.SLDPRT2003-05-29 14:12 287K 
[ ]Foam, Nose SectionTOP.SLDPRT2003-05-29 14:12 393K 
[ ]RING, INSERT, AFT NOSE. FFS.SLDPRT2003-05-29 14:12 419K 
[ ]CAP, Slotted.Rmvble. NOSE, ODIII.SLDPRT2003-05-29 14:12 533K 
[ ]Clipped Fwd Nose bottom.SLDPRT2003-05-29 14:12 501K 
[ ]Clamp, Foam.SLDPRT2003-05-29 14:12 164K 
[ ]Foam, Center, Btm.SLDPRT2003-05-29 14:12 190K 
[ ]Plate, Battery Mount, Fwd.SLDPRT2003-05-29 14:12 284K 
[ ]Bulkhead, CTD.SLDPRT2003-05-29 14:12 585K 
[ ]Foam, Aft.SLDPRT2003-05-29 14:12 299K 
[ ]Foam, Center.SLDPRT2003-05-29 14:12 722K 
[ ]6kwh Battery Nose Assy.SLDASM2003-05-29 14:13 5.4M 
[ ]Lower Frame.SLDASM2003-05-29 14:16 2.1M 
[ ]MidBody.SLDASM2003-05-29 14:16 4.9M 
[ ]MultiBeam Vehicle Assembly.SLDASM2003-05-29 14:16 8.1M 
[ ]Foam, Filler slice.SLDPRT2004-06-03 17:37 561K 
[ ]~$compressin brace.SLDPRT2004-08-23 16:38 5  
[ ]~$Latch Pin.SLDPRT2004-08-23 16:47 5  
[ ]~$Lock. Latch.SLDPRT2004-08-23 16:47 5  
[IMG]multibeam vehicle assembly_04_27_2004.tif2004-08-26 12:41 4.5M 
[ ]~$RUBBER WELL NUT.SLDPRT2006-07-28 09:46 7  
[ ]~$HEX FLANGED INSERTRevB.SLDPRT2006-07-28 09:46 7  
[ ]~$MultiBeam AUV Towhook.SLDPRT2006-09-12 14:43 7  
[ ]#2 Dorn Dales Version Body.SLDPRT2010-11-04 14:20 295K 
[ ]#2 Dorn Cap.SLDPRT2010-11-04 16:14 139K 
[ ]#2 Dorn Nut.SLDPRT2010-11-04 16:14 208K 
[ ]Thumbs.db2020-06-30 12:17 26K 
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80