' ******************************************************************************
' swxJRNL.swj - journal recorded on 05/11/04 by shfa
' *****************************************************************************
Dim swApp As Object
Dim Part As Object
Dim boolstatus As Boolean
Dim longstatus As Long, longwarnings As Long
Dim FeatureData As Object
Dim Feature As Object
Dim Component As Object
Sub main()

Set swApp = Application.SldWorks

Set Part = swApp.OpenDoc6 ("G:\600024.Dorado\leo\Leo\Tail.SLDASM", 2, 0, "", longstatus, longwarnings)
Set Part = swApp.ActivateDoc ("Tail.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("TailTop-Shelf-1@Tail/Shell_Top_Tail-1@TailTop-Shelf", "COMPONENT", 0.969580446602, 0.1270647260999, -0.08971356731598, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("tc_foam-1@Tail/afttopfoam-1@tc_foam", "COMPONENT", 0.7176997670877, 0.2012959892172, 0.05057734128729, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("tc_foam-1@Tail/aftbottomfoam-1@tc_foam", "COMPONENT", 1.004485168245, -0.08336554297131, 0.0460350442076, False, 0, Nothing)
Part.RotateComponent
Part.ClearSelection2 True
Set Part = Nothing
swApp.CloseDoc "Tail.SLDASM"
Set Part = swApp.OpenDoc6 ("G:\600024.Dorado\Dorado.Drawings\Dorado.ME.Dwgs\TailCone_Bluefin_4.02\ASSEMBLY, THRUSTER, TAILCONE.SLDASM", 2, 0, "", longstatus, longwarnings)
Set Part = swApp.ActivateDoc ("ASSEMBLY, THRUSTER, TAILCONE.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("CONE ASSEMBLY-1@ASSEMBLY, THRUSTER, TAILCONE/SOCKET HEAD CAP SCREWS (U.S.)-16@CONE ASSEMBLY", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
swApp.LoadFile2 "E:\Multibeam\Nose Section\8 inch Extension 6kwh Battery Nose Assy.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("E:\Multibeam\Nose Section\8 inch Extension 6kwh Battery Nose Assy.SLDASM", 2, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("8 inch Extension 6kwh Battery Nose Assy.SLDASM")
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 991
swApp.ActiveDoc.ActiveView.FrameHeight = 295
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.ViewZoomtofit2
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.LoadFile2 "C:\Program Files\SolidWorks\data\templates\Assembly.asmdot", ""
Set Part = swApp.ActiveDoc
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.NewDocument ("C:\Program Files\SolidWorks\data\templates\Assembly.asmdot", 0, 0.000000, 0.000000)
Set Part = swApp.ActivateDoc ("Assem1")
Part.AddComponent "E:\Multibeam\Nose Section\8 inch Extension 6kwh Battery Nose Assy.SLDASM", -0.09955174514572, -0.02224028349, 1.850588660091e-008
Part.SaveAs2 "X:\900403 AUV GULPER\Gulper AUV Assembly.SLDASM", 0, FALSE, FALSE
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 991
swApp.ActiveDoc.ActiveView.FrameHeight = 196
Set Part = swApp.ActivateDoc ("ASSEMBLY, THRUSTER, TAILCONE.SLDASM")
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.LargeAssemblyMode = True
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.ViewZoomtofit2
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.RotateComponent
Part.RotateComponent
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("DetailItem11@Annotations", "NOTE", -0.04392362230877, 1.109577206757, 4.220660359238, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem12@Annotations", "NOTE", 0.2971212961985, 1.25074921089, 4.214942107051, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem8@Annotations", "NOTE", -1.307333671327, -1.004380563918, 4.344501675446, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem9@Annotations", "NOTE", -1.297848303291, -0.9949490652259, 4.343987417975, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem10@Annotations", "NOTE", -1.297848303291, -0.9949490652259, 4.343987417975, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem4@Annotations", "NOTE", 0.8144108499066, -0.2708126912719, 4.318263832806, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem5@Annotations", "NOTE", 0.8144108499066, -0.2708126912719, 4.318263832806, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem6@Annotations", "NOTE", -0.2078264505912, -0.2787131919616, 4.308609982828, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem7@Annotations", "NOTE", -0.2078264505912, -0.2787131919616, 4.308609982828, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem3@Annotations", "NOTE", -0.3969015134635, -0.1745231461835, 4.300007250362, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem1@Annotations", "NOTE", 0.2672374227326, 0.5612482189138, 4.259134935319, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem2@Annotations", "NOTE", 0.4285498694685, 0.7499211179265, 4.248564698781, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem15@Annotations", "NOTE", -0.00630849744421, 0.9961702881752, 4.228351913551, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem14@Annotations", "NOTE", -0.5642930784856, 1.20482223919, 4.209340896829, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("DetailItem13@Annotations", "NOTE", -0.1569933606585, 1.345894084575, 4.204287847933, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "E:\Multibeam\Nose Section\8 inch Extension 6kwh Battery Nose Assy.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("E:\Multibeam\Nose Section\8 inch Extension 6kwh Battery Nose Assy.SLDASM", 2, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 196
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("8 inch Extension 6kwh Battery Nose Assy.SLDASM")
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Exploded Nose View", "CONFIGURATIONS", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Exploded Nose View", "CONFIGURATIONS", 0, 0, 0, False, 0, Nothing)
Part.ShowConfiguration "Exploded Nose View"
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.AddConfiguration "AUV Gulper","Section for Water Sampling","",0,0,0,1,256
Part.ViewZoomtofit2
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 196
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
Set Part = swApp.ActivateDoc ("8 inch Extension 6kwh Battery Nose Assy.SLDASM")
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 196
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.SetUserPreferenceToggle(6, True)
boolstatus = Part.SetUserPreferenceToggle(13, True)
boolstatus = Part.SetUserPreferenceToggle(196, False)
boolstatus = Part.SetUserPreferenceToggle(6, False)
' MSGBOX
' Some of the models referenced in this document have been modified.  They must be saved when the document is saved.
' 		Save the document and the referenced models now?

Part.Save2 FALSE
boolstatus = Part.Extension.SelectByID("Sketch3@ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly/CONE ASSEMBLY-1@ASSEMBLY, THRUSTER, TAILCONE/SOCKET HEAD CAP SCREWS (U.S.)-16@CONE ASSEMBLY", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch3@ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly/CONE ASSEMBLY-1@ASSEMBLY, THRUSTER, TAILCONE/SOCKET HEAD CAP SCREWS (U.S.)-16@CONE ASSEMBLY", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ShowConfiguration "[641]  #6 -32 UNC x ¼"
' MSGBOX
' The part you are editing is not mated or fixed in space. Adding in-context features may produce undesirable results. It is recommended that you position the component before doing so.

Part.ClearSelection2 True
Part.SketchConstraintsDel 1, "sgCOINCIDENT"
' MSGBOX
' The sketch is over defined.  Consider deleting some over defining dimensions or relations.

Part.SketchConstraintsDel 3, "sgCOINCIDENT"
Part.SketchConstraintsDel 4, "sgCOINCIDENT"
' MSGBOX
' The sketch is no longer over defined.

Part.SketchConstraintsDel 5, "sgCOINCIDENT"
Part.SketchConstraintsDel 7, "sgCOINCIDENT"
Part.SketchConstraintsDel 8, "sgCOINCIDENT"
Part.ClearSelection2 True
Part.InsertSketch2 True
Part.EditAssembly
boolstatus = Part.Extension.SelectByID("Sketch11@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Bulkhead, Aft-1@8 inch Extension 6kwh Battery Nose Assy", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
' MSGBOX
' The part you are editing is not mated or fixed in space. Adding in-context features may produce undesirable results. It is recommended that you position the component before doing so.

' MSGBOX
' This part has features defined in the context of another assembly <6kwh Battery Nose Assy.sldasm>. You can edit the part, but cannot create any external references to the components of the current assembly.

Part.ClearSelection2 True
Part.SketchConstraintsDel 1, "sgCONCENTRIC"
Part.SketchConstraintsDel 2, "sgCONCENTRIC"
Part.InsertSketch2 True
Part.EditAssembly
boolstatus = Part.Extension.SelectByID("Coincident562@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident563@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident564@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Concentric460@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Concentric463@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Concentric464@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Concentric465@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Concentric466@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Concentric473@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Coincident613@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident614@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident615@8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "MATE", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
' MSGBOX
' Some of the models referenced in this document have been modified.  They must be saved when the document is saved.
' 		Save the document and the referenced models now?

Part.Save2 FALSE
boolstatus = Part.Extension.SelectByID("Gulper AUV Assembly.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.ClearSelection2 True
swApp.LoadFile2 "C:\2004 PROJECTS\MARS Shore Station\MARS Shore Station Assembly.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2004 PROJECTS\MARS Shore Station\MARS Shore Station Assembly.SLDASM", 2, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
Part.PrintDirect
Part.PrintDirect
swApp.PageSetup
Part.PrintDirect
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 196
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 2.213966535915, -0.0004367799462841, 0.1928146092265, False, 0, Nothing)
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 196
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 991
swApp.ActiveDoc.ActiveView.FrameHeight = 188
Set Part = swApp.ActivateDoc ("ASSEMBLY, THRUSTER, TAILCONE.SLDASM")
Set Part = Nothing
swApp.CloseDoc "ASSEMBLY, THRUSTER, TAILCONE.SLDASM"
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.LoadFile2 "C:\2003 Projects\MultiBeam AUV\Midbody\Fairing Assembly.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2003 Projects\MultiBeam AUV\Midbody\Fairing Assembly.SLDASM", 2, 0, "", longstatus, longwarnings)
Set Part = swApp.ActivateDoc ("Fairing Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.ViewZoomtofit2
' MSGBOX
' A model referencing itself is not allowed. Please select another model.

' MSGBOX
' A model referencing itself is not allowed. Please select another model.

' MSGBOX
' Fairing Assembly has not been rebuilt successfully since the last feature change or an externally referenced model has changed.
' 	It is safest to rebuild before saving.
' 		Rebuild now?

' MSGBOX
' Some of the models referenced in this document have been modified.  They must be saved when the document is saved.
' 		Save the document and the referenced models now?

Part.SaveAs2 "C:\2003 Projects\MultiBeam AUV\Midbody\Bottom Fairing Assembly.SLDASM", 0, FALSE, FALSE
' MSGBOX
' A model referencing itself is not allowed. Please select another model.

swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 991
swApp.ActiveDoc.ActiveView.FrameHeight = 188
boolstatus = Part.Extension.SelectByID("Bottom Fairing Assembly.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.LoadFile2 "C:\2003 Projects\MultiBeam AUV\Midbody\Fairing Assembly.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2003 Projects\MultiBeam AUV\Midbody\Fairing Assembly.SLDASM", 2, 0, "", longstatus, longwarnings)
Set Part = swApp.ActivateDoc ("Fairing Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", -0.3364711696892, 0, -0.24957451159, False, 0, Nothing)
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 495
swApp.ActiveDoc.ActiveView.FrameHeight = 283
boolstatus = Part.Extension.SelectByID("Fairing Assembly.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 283
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 2.373401375215, 0.4963919618064, -2.451531839721, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.8445810051929, 0.8064133652367, -2.788062953331, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottom Fairing Assembly-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ViewZoomtofit2
boolstatus = Part.Extension.SelectByID("Bottom Fairing Assembly-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Bottom Fairing Assembly-1@Gulper AUV Assembly/TOP PARALLEL SHELL-1@Bottom Fairing Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "C:\2003 Projects\MultiBeam AUV\Midbody\TOP PARALLEL SHELL.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2003 Projects\MultiBeam AUV\Midbody\TOP PARALLEL SHELL.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("TOP PARALLEL SHELL.SLDPRT")
Part.ClearSelection2 True
' MSGBOX
' C:\2003 Projects\MultiBeam AUV\Midbody\TOP PARALLEL SHELL.SLDPRT is being referenced by other open documents.  "Save As" will replace these references with the new name. Check "Save As Copy" in the "Save As" dialog if you wish to maintain existing references.  

Part.SaveAs2 "C:\2003 Projects\MultiBeam AUV\Midbody\BOTTOM PARALLEL SHELL.SLDPRT", 0, TRUE, FALSE
' MSGBOX
' Save changes to TOP PARALLEL SHELL.SLDPRT?

Set Part = Nothing
swApp.CloseDoc "TOP PARALLEL SHELL.SLDPRT"
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 283
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.LoadFile2 "C:\2003 Projects\MultiBeam AUV\Midbody\BOTTOM PARALLEL SHELL.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2003 Projects\MultiBeam AUV\Midbody\BOTTOM PARALLEL SHELL.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("BOTTOM PARALLEL SHELL.SLDPRT")
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Cut-Extrude3", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditInContext
' MSGBOX
' Sketch1 is defined in the context of assembly C:\Documents and Settings\hamilton\My Documents\MyDorado\MultiBeam MidBodies\New Folder\TOP PARALLEL SHELL SUB-ASSEMBLY.SLDASM, which could not be opened.

Part.ClearSelection2 True
Part.InsertSketch2 True
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0529907, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0529907, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0441589, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0441589, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0529907, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0706543, -0.0229473
Part.ActiveView().RotateAboutCenter 0.141309, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0618225, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
boolstatus = Part.Extension.SelectByID("Solid Bodies1", "BDYFOLDER", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.7040459425648, -0.1057635517147, 0.2462027724699, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("LPattern1", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.7027202952915, -0.09779220248146, 0.2433902154861, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Cut-Extrude2", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 481
swApp.ActiveDoc.ActiveView.FrameHeight = 283
Set Part = swApp.ActivateDoc ("Bottom Fairing Assembly.SLDASM")
boolstatus = Part.Extension.SelectByID("", "FACE", -0.0238248689287, -0.2236503089941, 0.1452908437817, False, 0, Nothing)
Part.TranslateComponent
Part.ViewZoomtofit2
Set Part = swApp.ActivateDoc ("BOTTOM PARALLEL SHELL.SLDPRT")
Part.Save2 FALSE
boolstatus = Part.Extension.SelectByID("BOTTOM PARALLEL SHELL.SLDPRT", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("Bottom Fairing Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 481
swApp.ActiveDoc.ActiveView.FrameTop = 188
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", -0.338143744744, -0.2661362953334, 0.01733096379948, False, 0, Nothing)
Part.EditDelete
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.8175778987976, -0.241486349364, 0.09729576337554, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.9028105378207, -0.01408157343906, 0.6860292193463, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.4108936693325, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.8049467502503, -0.07050112174926, -0.2478603992059, True, 1, Nothing)
Part.DeSelectByID "", "EDGE", 0.8049467502503, -0.07050112174926, -0.2478603992059
boolstatus = Part.Extension.SelectByID("", "FACE", 0.8382, -0.05531560713192, -0.2440874757542, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 1.255394893039, -0.01049676211579, -0.2644666579008, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.4171948930392, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
' MSGBOX
' Some of the models referenced in this document have been modified.  They must be saved when the document is saved.
' 		Save the document and the referenced models now?

Part.Save2 FALSE
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 481
swApp.ActiveDoc.ActiveView.FrameTop = 188
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 495
swApp.ActiveDoc.ActiveView.FrameHeight = 283
Set Part = swApp.ActivateDoc ("BOTTOM PARALLEL SHELL.SLDPRT")
Part.ClearSelection2 True
Set Part = Nothing
swApp.CloseDoc "BOTTOM PARALLEL SHELL.SLDPRT"
Set Part = swApp.ActivateDoc ("Bottom Fairing Assembly.SLDASM")
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 495
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 1.810479400795, 0.4280688705839, -2.520768242047, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.7450871981468, 0.7858694541946, -0.4093247186046, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 1.778304475761, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 1.657999091739, 0.4995094535453, -2.934971331562, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.8424605851615, 0.8616597276927, -2.671387489592, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.8072151142649, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 1.226911106657, 0.822513311588, -2.76930471823, True, 1, Nothing)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 1.151510060339, 0.8226832524558, -2.77177228587, False, 0, Nothing)
Part.RotateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 1.913720679204, 0.8674100275635, -3.302408868351, False, 0, Nothing)
Part.RotateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 1.646943205839, 0.8287914035384, -2.576841495059, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 1.546199713176, 1.04258557866, -3.279858720708, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.183800251547, 0, 0, 1, 1, 0.132964711348, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 1.893501125018, 0.4446816977394, -2.502405784654, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 1.832639820176, 1.000314447756, -3.153609658046, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.195912873766, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 1.668090895204, 0.5154759673581, -2.936224917476, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 1.669274862167, 0.719149002011, -2.934267315378, True, 1, Nothing)
Set Feature = Part.AddMate2 (3, 1, False, 0.2009934779852, 0, 0, 1, 1, 0.2251566136575, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
swApp.LoadFile2 "C:\2003 Projects\MultiBeam AUV\TailSection\KearfottTail.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2003 Projects\MultiBeam AUV\TailSection\KearfottTail.SLDASM", 2, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("KearfottTail.SLDASM")
boolstatus = Part.Extension.SelectByID("Compensator-1@KearfottTail/base-1@Compensator", "COMPONENT", 0.01610205482649, -0.2869569479079, 0.2684828784891, False, 0, Nothing)
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 495
swApp.ActiveDoc.ActiveView.FrameHeight = 283
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 283
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 2.209817236208, -0.07825970288168, -0.2051812909611, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly/CONE ASSEMBLY-1@ASSEMBLY, THRUSTER, TAILCONE", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 283
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Set Part = swApp.ActivateDoc ("KearfottTail.SLDASM")
Part.ClearSelection2 True
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.LargeAssemblyMode = True
Set Part = swApp.ActivateDoc ("KearfottTail.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 283
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1643224017038, 0.11054226177, 0.1032680642364, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1201578147882, 0.2014363154857, 0.09698543636097, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-3@KearfottTail", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.RotateComponent
Part.RotateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.05961085998916, 0.2972419058514, -0.3053706306409, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.06523740600409, 0.09376296977091, 0.1675241707211, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.4656504911884, 0, 0, 1, 1, 2.873986821784, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.06678814237301, 0.3139990112247, -0.1485361398571, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.008506423678966, 0.1567465242514, -0.1298018313773, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.008506423672259, 0.0978371193774, -0.1472463472189, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.008506423676124, 0.1394921136414, -0.1372430997273, False, 0, Nothing)
Part.FixComponent
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.06677893679773, 0.3523645667499, -0.144492699373, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.008506423681979, 0.143583004084, -0.121694031226, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.09111424765574, 0, 0, 1, 1, 3.14135271063, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04471392853424, 0.4025949599621, -0.07545844423203, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03521948517488, 0.06762085041191, -0.09811684249337, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.3349741095501, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01073194392046, 0.06127085041197, 0.1791971880824, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.00765699816759, -0.07842914958798, 0.1985523033299, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.008083793576986, 0.05174585041198, 0.2027042963949, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.0116120675529, -0.07842914958798, 0.2021415641184, True, 0, Nothing)
' MSGBOX
' Warning: This mate is over defining the assembly.  Consider deleting some of the over defining mates.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("KearfottTail.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ViewZoomtofit2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-2@KearfottTail", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-2@KearfottTail", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("TAILCONE FOAM PACK-1@KearfottTail", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("ASSEMBLY, THRUSTER, TAILCONE-3@KearfottTail", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
Set Part = Nothing
swApp.CloseDoc "KearfottTail.SLDASM"
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
boolstatus = Part.Extension.SelectByID("CirPattern1@ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly/CONE ASSEMBLY-1@ASSEMBLY, THRUSTER, TAILCONE", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
' MSGBOX
' The part you are editing is not mated or fixed in space. Adding in-context features may produce undesirable results. It is recommended that you position the component before doing so.

boolstatus = Part.Extension.SelectByID("ShaftAxis@ASSEMBLY, THRUSTER, TAILCONE-1@Gulper AUV Assembly/CONE ASSEMBLY-1@ASSEMBLY, THRUSTER, TAILCONE/DRIVETRAIN-1@CONE ASSEMBLY", "AXIS", 2.297960625684, -0.09863769129778, 0.00972674976531, True, 0, Nothing)
Part.ActivateSelectedFeature
Part.ClearSelection2 True
Part.ClearSelection2 True
Part.ActiveView().RotateAboutCenter 0.0192062, 0
Part.ActiveView().RotateAboutCenter 0.192062, 0.0573682
Part.ActiveView().RotateAboutCenter -0.134444, 0.894944
Part.ActiveView().RotateAboutCenter 0.0576187, 0.240946
Part.ActiveView().RotateAboutCenter 0.0672219, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.0480156, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0960312, -0.172105
Part.ActiveView().RotateAboutCenter 0.0384125, -0.114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.172105
Part.ActiveView().RotateAboutCenter 0, -0.0917891
Part.ActiveView().RotateAboutCenter 0, -0.0114736
swApp.LoadFile2 "X:\900403 AUV GULPER\AUV Water Sampler.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("X:\900403 AUV GULPER\AUV Water Sampler.SLDASM", 2, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
boolstatus = Part.Extension.SelectByID("", "FACE", -0.02270533172333, -0.212638015355, 0.370332, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.02117423232067, -0.2131306149112, 0.370332, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Rotating Manifold Plate.SLDPRT")
Part.ClearSelection2 True
Set Part = Nothing
swApp.CloseDoc "Rotating Manifold Plate.SLDPRT"
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
boolstatus = Part.Extension.SelectByID("", "FACE", 0.08264326632158, -0.09116200905423, 0.370332, False, 0, Nothing)
Part.EditPart
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.04752697769075, -0.1953299800032, 0.370332, False, 0, Nothing)
Part.InsertSketch2 True
Part.ShowNamedView2 "*Normal To", 0
Part.ViewDisplayHiddengreyed
Part.ClearSelection2 True
Part.CreateCircle 0.007043285024155, 0.1997274396135, 0, 0.03320405797101, 0.1463997101449, 0
boolstatus = Part.Extension.SelectByID("", "FACE", 0.05438907641001, -0.03079596618357, 0.370332, True, 0, Nothing)
Part.ViewZoomTo2 -0.146958, 0.0637853, -0.432054, 0.0130252, -0.064, -0.432054
Part.DeSelectByID "", "FACE", 0.08807872732369, 0.03533916777988, 0.370332
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.1107467308524, 0.03267234383533, 0.370332, False, 0, Nothing)
Part.EditDelete
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1789588112584, -0.1891327015723, 0.3830319999999, False, 0, Nothing)
Part.InsertSketch2 True
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.CreateCircle 0, 0.2065263626497, 0, 0.013945103313, 0.200120574241, 0
Part.EditDelete
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1237511352952, -0.005949388215749, 0.383032, True, 0, Nothing)
Part.EditAssembly
boolstatus = Part.Extension.SelectByID("Arc1@Sketch4", "EXTSKETCHSEGMENT", -0.1252667741044, -0.006596319181983, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.06762422733299, 0.03797601801553, 0.493776, True, 0, Nothing)
Part.ViewZoomtofit2
boolstatus = Part.Extension.SelectByID("", "FACE", -0.00698812165762, -0.2400821497585, 0.383032, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Rotating Manifold Plate.SLDPRT")
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.05975460296287, -0.1057729547816, 0.0127, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.001509275362319, -0.1423749758454, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", -0.03873806763285, 0.1363378743961, 0.006349999999999, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.016602, 0.192684, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch4").SystemValue = 0.41275
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, 0, 0.2339376811594, 0 ).ConstructionGeometry = TRUE
Part.CreateCircle 0, 0.206375, 0, 0.01056492753623, 0.170548115942, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.03270096618357, 0.2258882125604, 0.006349999999998, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.126276, 0.259092, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch4").SystemValue = 0.0762
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.10414, 0.1816161352657, 0.0127, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.02465149758454, 0.1785975845411, 0.006349999999999, True, 0, Nothing)
Part.Extension.RotateOrCopy True, 12, False, 0, 0, 0, 0, 0, 1, 0.5235987755983
' MSGBOX
' The sketch has intersecting contours.
' Pick a sketch entity to define an open or closed contour. To define a region, pick inside an area bounded by sketch geometry.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", -0.0216329468599, 0.1755790338164, 0.0127, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.03270096618357, 0.2279005797101, 0.006349999999998, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.136338, 0.265129, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch4").SystemValue = 0.0762
Part.ClearSelection2 True
Part.ClearSelection2 True
Part.FeatureManager.FeatureCut True, False, False, 1, 0, 0.01, 0.01, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0529907, -0.12621
Part.ActiveView().RotateAboutCenter 0.0441589, -0.114736
Part.ActiveView().RotateAboutCenter 0.0441589, -0.0917891
Part.ActiveView().RotateAboutCenter 0.0353271, -0.103263
Part.ActiveView().RotateAboutCenter 0.0176636, -0.0803155
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0688419
Part.ActiveView().RotateAboutCenter 0.0176636, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0176636, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 481
swApp.ActiveDoc.ActiveView.FrameHeight = 188
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 188
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0917891
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0803155
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0573682
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0688419
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0917891
Part.ActiveView().RotateAboutCenter 0, -0.0917891
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0425087, 0.114736
Part.ActiveView().RotateAboutCenter 0.0680139, 0.344209
Part.ActiveView().RotateAboutCenter 0.0595121, 0.12621
Part.ActiveView().RotateAboutCenter 0.0510104, 0.0803155
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0573682
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0688419
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0803155
Part.ActiveView().RotateAboutCenter 0.0340069, 0.114736
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0573682
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0573682
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0688419
Part.ActiveView().RotateAboutCenter 0.0340069, 0.103263
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0803155
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0573682
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0688419
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0688419
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0573682
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0803155
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0425087, -0.0573682
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0340069, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0114736
boolstatus = Part.Extension.SelectByID("Coincident29", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
Part.ShowNamedView2 "*Normal To", 0
Part.ShowNamedView2 "*Front", 1
boolstatus = Part.Extension.SelectByID("", "FACE", 0.0781753348002, -0.03933919962448, 0.493776, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.09626524926358, -0.08426061946656, 0.370332, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.123444, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.SetUserPreferenceToggle(6, False)
boolstatus = Part.SetUserPreferenceToggle(196, False)
Part.ViewDisplayHiddenremoved
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1407253906235, -0.2045682647971, 0.5064760000001, True, 1, Nothing)
Part.DeSelectByID "", "FACE", 0.1407253906235, -0.2045682647971, 0.5064760000001
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1174921198534, -0.2054019284783, 0.5064760000001, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.9241990887937, -0.2656644867113, 0.745489766675, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04933764974743, -0.03131203907147, 0.370332, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.3751577666749, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.9616585057474, -0.05583420856842, 0.3652984312009, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.09652530482219, 0.03426022783452, 0.3841321222717, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.9255858909383, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.09683014160987, -0.2035703864891, 0.506476, True, 1, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.08558076723127, -0.1776987681159, 0.506476, False, 0, Nothing)
Part.EditPart
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1137539073279, -0.1374514251208, 0.506476, False, 0, Nothing)
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.01006183574879, -0.03773188405797, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.1057044387289, -0.1797111352657, 0.432054, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0845194, 0.0628865, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch5@Rotating Manifold Plate.Part").SystemValue = 0.079375
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch5@Rotating Manifold Plate-1@AUV Water Sampler", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.FeatureManager.FeatureCut True, False, False, 1, 0, 0.00254, 0.00254, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0229473
Part.ActiveView().RotateAboutCenter -0.0170035, 0.0458946
Part.ActiveView().RotateAboutCenter -0.0170035, 0.0458946
Part.ActiveView().RotateAboutCenter -0.0170035, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, 0
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0688419
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1350496405875, -0.1464594176999, 0.5064759999999, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1882114918689, -0.09418553140097, 0.506476, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Rotating Manifold Plate.SLDPRT")
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.06844050929755, 0.09413997135988, 0.01269999999994, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.CreateCircle 0, 0.206375, 0, 0.01056492753623, 0.162498647343, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.03471333333333, 0.1725604830918, 0.006349999999999, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.121245, 0.268148, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch6").SystemValue = 0.0889
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", -0.009558743961353, 0.1604862801932, 0.0127, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, 0.206375, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.02364531400966, 0.1675295652174, 0.0127, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, 0.206375, 0, True, 0, Nothing)
Part.ClearSelection2 True
Part.ViewZoomTo2 -0.065905, 0.274185, -0.00635, 0.0850225, -0.0387381, -0.00635
Part.SetUserPreferenceIntegerValue swUnitsLinearDecimalPlaces , 2
Part.SetUserPreferenceIntegerValue swUnitsAngularDecimalPlaces , 2
Part.SetUserPreferenceToggle swGridDisplay , False
Part.SetUserPreferenceIntegerValue swImageQualityWireframe , swWireframeImageQualityCustom
Part.ClearSelection2 True
Part.CreateLine2( 0, 0.206375, 0, 0, 0.2671102412098, 0 ).ConstructionGeometry = TRUE
Part.CreatePoint2 0, 0.2562259597564, 0
Part.ClearSelection2 True
Part.CreateCircle 0, 0.2562259597564, 0, 0.007728853527002, 0.2883343086152, 0
Part.EditDelete
Part.CreateCircle 0.02155349306184, 0.2725407193273, 0, 0.06745054996547, 0.2882176645285, 0
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Point8", "SKETCHPOINT", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
Part.CreateLine2( 0, 0.206375, 0, 0.07553910718414, 0.2710019523585, 0 ).ConstructionGeometry = TRUE
Part.CreatePoint2 0.04407739385644, 0.2440851045939, 0
Part.ClearSelection2 True
Part.CreateCircle 0.04407739385644, 0.2440851045939, 0, -0.0359613002943, 0.1794868512065, 0
Part.EditDelete
Part.ViewZoomtofit2
Part.CreateCircle 0, 0, 0, -0.02886867585332, 0.2897040243762, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc7", "SKETCHSEGMENT", 0.1970762275912, 0.2169975032649, -0.01680370593513, False, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.258128, 0.250922, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch6").SystemValue = 0.5207
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc7", "SKETCHSEGMENT", -0.1766851718793, 0.1929508594142, 0.0127, False, 0, Nothing)
Part.EditDelete
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch1@Rotating Manifold Plate.SLDPRT", "DIMENSION", 0.1463738184531, 0.1572196333791, -0.01680370593513, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("D1@Sketch1@Rotating Manifold Plate.SLDPRT", "DIMENSION", 0.1443131383506, 0.1592883787761, -0.01680370593513, False, 0, Nothing)
Part.Parameter("D1@Sketch1").SystemValue = 0.51435
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch6", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.1009944970781, 0.1800201918651, 0
Part.ClearSelection2 True
Part.CreateLine2( 0, 0.206375, 0, 0, 0.1482086949868, 0 ).ConstructionGeometry = TRUE
Part.CreatePoint2 0, 0.161925, 0
Part.ClearSelection2 True
Part.EditUndo 1
Part.ViewZoomTo2 -0.0831171, 0.267968, -0.0295037, 0.0820603, 0.0945314, -0.0295037
Part.CreatePoint2 0, 0.1566672038563, 0
Part.ClearSelection2 True
Part.CreateCircle 0, 0.1566672038563, 0, -0.0005782505727472, 0.2061353087697, 0
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", -0.06673661261391, 0.154082750333, 0.0127, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.04287674317288, 0.2166074419584, 0.0127, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, 0.206375, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point26", "SKETCHPOINT", -0.0151446331504, 0.2040117398051, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point28", "SKETCHPOINT", -0.02220023664304, 0.2011420786786, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point30", "SKETCHPOINT", -0.02911549766816, 0.1969555742999, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point32", "SKETCHPOINT", -0.03745094472066, 0.1893519363318, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point34", "SKETCHPOINT", -0.04361966699992, 0.1805039328324, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point36", "SKETCHPOINT", -0.04805883605724, 0.1693641827997, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point38", "SKETCHPOINT", -0.04956513253419, 0.1604305314175, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point40", "SKETCHPOINT", -0.04938156694862, 0.1509816218137, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point42", "SKETCHPOINT", -0.04725474832973, 0.1412446957023, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point44", "SKETCHPOINT", -0.04361966699992, 0.1328304748802, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point46", "SKETCHPOINT", -0.03745094472066, 0.1239824713808, 0, True, 0, Nothing)
Part.ClearSelection2 True
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.01817568127705, 0.233245267659
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.02659179826677, 0.2181473922935
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.004419289461292, 0.2471643211242
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.02867137915211, 0.2018553779815
boolstatus = Part.Extension.SelectByID("Arc9", "SKETCHSEGMENT", 0.04817407775997, 0.1490322550684, 0.0127, False, 0, Nothing)
Part.EditDelete
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.02713849822294, 0.1891899642958
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.0208485023741, 0.2118244058838
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.01002879044531, 0.2317530358138
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005031970539234, 0.2423394577313
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.02232895187615, 0.197644963018
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01197824213576, 0.2378285934004
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.006993073562051, 0.2218052161292
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.01240234040929, 0.2115392735625
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01109869136847, 0.2248568391758
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.001243886497796, 0.2124659537025
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.00395087639005, 0.2085394928259
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.005145015336526, 0.2022029567216
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.01447072806862, 0.1895163348182
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02287159370939, 0.2200537731177
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004514726440997, 0.1983006496485
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.001785284399539, 0.1807938772895
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.001860167975865, 0.1675293322205
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.03254017224429, 0.2116270520192
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01747705479111, 0.2022471405085
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.0223137005272, 0.1968272695524
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04129974415398, 0.205309956781
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.03800363787013, 0.1941432552293
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.03350043206231, 0.1832758248107
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02718392594133, 0.1742146252993
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.0496958311603, 0.2306631706044
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.04788135261282, 0.2330726567151
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04727868652657, 0.2327698508791
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.03730848038997, 0.2411959828605
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.03791291382769, 0.2405939058914
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02704548340904, 0.2450971116992
Part.EditUndo 1
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.0264428173228, 0.2447943058632
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.0530125565447, 0.2312729060966
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05663738981955, 0.2285653270872
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05966250259395, 0.2240468042332
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05846011600726, 0.2219330545527
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05695669093602, 0.2195170881533
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.054232027529, 0.2246394553278
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05365056966047, 0.2134780558305
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05427208749579, 0.204128778412
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06089081033563, 0.2128889394389
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05848191334213, 0.2107728332897
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06389883871243, 0.2171176170343
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc24", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06449561362709, 0.2204366988873
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06690922355786, 0.2201397842229
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc25", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06782294312035, 0.2156171375489
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc24", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07114379232486, 0.2141154798291
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07719814169377, 0.2029670409093
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc25", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07297476615278, 0.2032604208708
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.07145896962121, 0.2071786341071
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06602849455626, 0.2077712852017
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07931248049148, 0.2014630267209
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc27", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07901497670988, 0.1993510443918
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc26", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07992162686647, 0.1984479289382
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06362489961718, 0.2029405306372
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.065743362235, 0.1993251232368
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06875551443191, 0.2014424076203
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc25", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07389143130106, 0.1972296361882
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06030463952983, 0.2041405607552
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05006579635241, 0.1956749579242
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04676792271708, 0.1854131391776
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.0404514165961, 0.1763519396662
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.03413137577217, 0.169100505765
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04197663900221, 0.1676076848026
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.04197604988506, 0.1679093124043
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04197604988506, 0.1679093124043
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.05161104874191, 0.1766753646027
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05161104874191, 0.1766753646027
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.05430920187679, 0.1851262395048
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05732665612812, 0.184528875473
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06183398575605, 0.1932849126797
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc22", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.05941743023948, 0.1950899653527
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06455334710864, 0.1908771939206
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06485438559318, 0.1911794106394
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06035530360548, 0.1782005870089
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05493484353222, 0.1736655688745
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04801449309068, 0.1649048187305
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.03294901916887, 0.1567314176266
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05344555727279, 0.1640105400342
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05885600235435, 0.1736732273975
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06275889854455, 0.1830313415734
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc25", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07240155592447, 0.1878762349497
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc25", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.07240155592447, 0.1878762349497
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07240155592447, 0.1878762349497
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc27", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08206483240495, 0.1821641622664
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07996286506757, 0.1773339968191
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08237352941255, 0.1785452201631
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc24", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08750473334444, 0.1767454695446
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08809974090762, 0.1809694342028
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08749295100126, 0.1827780215787
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc24", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08749471835274, 0.1818731387736
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07751331899012, 0.1960301951873
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc27", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08174317481985, 0.1924189116071
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08295145257813, 0.1915163852706
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc24", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08627230178265, 0.1900147275509
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.09144592214996, 0.1664977896098
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc26", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.09174813886882, 0.1661967511253
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc33", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.09175579739188, 0.1622755923032
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.09236435464971, 0.1595621221222
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc33", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08965795387462, 0.1553340336439
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08511586633433, 0.1643740249376
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08481070402967, 0.1661832014306
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc31", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08481070402967, 0.1661832014306
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07846827675371, 0.1703936163941
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.07634627943294, 0.1758187894047
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07061182029766, 0.1776173617888
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05978327161148, 0.1622131458843
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05887603233774, 0.1634178889397
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07245163088296, 0.162237888805
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07217062238181, 0.1516803336283
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.06372210394837, 0.1531719763563
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc31", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07338891513179, 0.1456501380629
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07580605976552, 0.1435434577882
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc31", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.07489057285156, 0.1489709872674
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc33", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.0758249115146, 0.1338913745338
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc32", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07734777745207, 0.126353630077
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc32", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08487668515145, 0.13240091004
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc33", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08365191211272, 0.1417490092241
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08637304081678, 0.1384364076599
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08758072945791, 0.1378355089251
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc32", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08788176794245, 0.1381377256439
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08998844821709, 0.1405548702777
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc32", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.09117610687482, 0.1502093100008
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.0788370637115, 0.1360086589173
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.0006011734841893, 0.1644468337027
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00075521808643, 0.1630351193593
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.0005547828205239, 0.1623791493923
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.0004034960534809, 0.16237885391
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.002624634001405, 0.161223322437
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.002624634001405, 0.161223322437
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc38", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.002624634001405, 0.161223322437
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.002624634001405, 0.161223322437
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.002624732495519, 0.1611728935147
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc39", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.001615366095652, 0.1615743550112
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc40", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.001514409756843, 0.1616245869453
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003229978057806, 0.1611236465217
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc41", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.002876187648458, 0.1615263884417
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003230273540148, 0.1609723597547
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003432580194224, 0.160670180197
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.0034832061048, 0.1605694208464
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003735941681224, 0.1602673397829
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003381855789534, 0.16082136847
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc42", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.003330737408387, 0.1611742724323
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc42", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003431792241311, 0.1610736115758
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00383611006712, 0.1606205392276
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.003785090180087, 0.1609230142676
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004291349285848, 0.1599154207618
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004797115921037, 0.1591599718677
boolstatus = Part.Extension.SelectByID("", "FACE", -0.003129317201339, 0.1610225916888, 0.0127, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc43", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004140850471718, 0.1595116939006
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004442537558777, 0.1599661451664
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004492966481124, 0.1599662436606
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004644154754053, 0.1600169680652
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00489649635402, 0.1599166026911
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005552170838654, 0.1598674541923
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005553943732709, 0.15895973359
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00530248857977, 0.158606238663
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005403740400923, 0.1584047199618
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00530317803857, 0.1582532362066
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005202615676217, 0.1581017524513
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005202714170331, 0.1580513235289
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc37", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005202714170331, 0.1580513235289
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005052904815001, 0.1572945942114
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005103432231463, 0.1572442637832
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005255211469077, 0.1569924146538
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005305837379653, 0.1568916553032
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00530623135611, 0.1566899396138
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005256787374904, 0.1561855518962
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005256984363133, 0.1560846940515
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005206850923128, 0.1559333087903
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00515711145958, 0.1555802078398
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00500661264545, 0.1551764809787
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004956577699559, 0.1549746667952
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004856113831321, 0.1547727541175
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004755748457196, 0.1545204125176
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004705516523077, 0.1544194561788
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005209214781869, 0.154723014654
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc37", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005360009078341, 0.1549754547481
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc49", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005459980476008, 0.1554295120374
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005560345850133, 0.1556818536374
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc49", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005509030480757, 0.1561356154444
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc51", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005508341021958, 0.1564886179008
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005707495864379, 0.1578001638583
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc46", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005100674396266, 0.1586562736089
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc47", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005100674396266, 0.1586562736089
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005096636137583, 0.1607238594251
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc44", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.004743535187035, 0.1607735988887
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005197395488164, 0.1607744853357
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc47", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005197395488164, 0.1607744853357
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005753098575131, 0.1602712795475
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc45", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.006105116090423, 0.1607762582298
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006359723055016, 0.1595160276417
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc48", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.006511699280858, 0.1591633206676
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006562719167891, 0.1588608456276
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc54", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.006411924871419, 0.1586084055335
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc48", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006360904984386, 0.1589108805735
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005858979619651, 0.157699601496
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005859472090222, 0.1574474568843
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc48", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005910590471369, 0.1570945529219
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006062665191325, 0.1566914170255
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc49", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.006063059167782, 0.1564897013361
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc52", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005710844664262, 0.1560855804985
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc37", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005360304560683, 0.154824167981
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc50", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005360304560683, 0.154824167981
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.005964466687713, 0.1553296391339
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc50", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.006014797115947, 0.1553801665503
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006316188720662, 0.1559859045832
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc50", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.006467475487705, 0.1559862000655
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.007373620184136, 0.1567948357172
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.008380622725263, 0.157603668357
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.008531515515849, 0.1578056795287
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc50", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.008431347129953, 0.1574524800841
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.007323782226474, 0.156492163689
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc49", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.007017564410162, 0.1583574428511
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc53", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.007065333991427, 0.1597191222486
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc53", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.007114679478518, 0.1602739388886
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006510911327945, 0.1595667520463
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.007873280184246, 0.1591659800086
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc49", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.00817486877719, 0.1596708601968
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.008073025991352, 0.1601749524321
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.008476260381905, 0.1602765982297
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc49", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.008627941125405, 0.1600751780226
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc23", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.009740627722823, 0.1584131904557
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc50", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.009840993096947, 0.1586655320556
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01094786854163, 0.1599788509072
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004252936645433, 0.1537629937412
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004454159864252, 0.1540155323294
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004504194810143, 0.1542173465129
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08253345476327, 0.1200737570968
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc55", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08221049734076, 0.1200731263198
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08188817069527, 0.1197495381202
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07770675518209, 0.1110214876112
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc34", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.07932280384869, 0.1103787266512
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07996556480862, 0.1119947753178
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.08703656614493, 0.1294483532279
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.08607210931652, 0.1271857589393
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.07224044852606, 0.09873838234639
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc20", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.003935835478297, 0.1051840040738
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc57", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.002553561609347, 0.1089864925959
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc56", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01391873025301, 0.1111742981633
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc55", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01498355390242, 0.1203802116623
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc37", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01821291981181, 0.1301317547744
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc36", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02199531729566, 0.1339289561811
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc35", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02468751297654, 0.1415138421871
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc30", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02521728124359, 0.1474702987385
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc29", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02520564958987, 0.1534256978668
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc28", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.02047248793466, 0.159831872502
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.04393680022452, 0.220082660686, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, 0.206375, 0, True, 0, Nothing)
Part.ClearSelection2 True
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, -0.1417272247793, 0.1500134473362, 0 ).ConstructionGeometry = TRUE
Part.CreateLine2( 0, 0, 0, 0, 0.06931711849392, 0 ).ConstructionGeometry = TRUE
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", -0.0001683495565795, 0.06717517155757, 0.3356250526906, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", -0.03873843775776, 0.05674754965263, 0.3360971818109, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0255941, 0.0579707, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch6").SystemValue = 0.750492
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1717211164448, 0.1531799577891, 0.01269999999994, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch4", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, -0.1337610440013, 0.3002380728762, 0 ).ConstructionGeometry = TRUE
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", -0.03865467417586, 0.09963444905236, 0.3341693212364, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0.0007983785658083, 0.1135613311497, 0.3335398157427, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0237288, 0.11585, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch4").SystemValue = 0.750492
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, -0.2241637598106, 0.06976031596088, 0 ).ConstructionGeometry = TRUE
Part.ViewZoomtofit2
boolstatus = Part.Extension.SelectByID("Point31", "SKETCHPOINT", -0.2241637598106, 0.06976031596088, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", -0.06006556820716, 0.06827545917749, 0.1642415208602, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", -0.08507203972971, 0.03150157134537, 0.1658967772909, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0937054, 0.0517621, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D3@Sketch4").SystemValue = 0.750492
Part.ClearSelection2 True
Part.CreateLine2 0, 0, 0, -0.3207084908817, -0.1648364629655, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", -0.1284682075987, 0.01534100812635, 0.1666270374809, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", -0.1123355745684, -0.05075480826243, 0.1695967622537, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.126388, -0.0295648, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D4@Sketch4").SystemValue = 0.750492
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, -0.06834378480411, -0.2847024507288, 0 ).ConstructionGeometry = TRUE
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", -0.01368993736781, -0.05527956149216, 0.1697914983043, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", -0.04073559930862, -0.0259851592256, 0.1684770299623, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0505783, -0.0698656, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D5@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", -0.03966304555648, -0.03190456472745, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", -0.005005407234203, -0.04933561366901, 0.01269999999994, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, 0.3018043559549, -0.04667922259553, 0 ).ConstructionGeometry = TRUE
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.06771991839469, -0.003453536623933, 0.1674546656963, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.04917157673429, -0.06406650949216, 0.1701809704057, True, 0, Nothing)
Set Annotation = Part.AddDimension2(0.10446, -0.0647424, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D6@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.09134825629848, -0.1172169360503, 0.1725664870264, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.1576345532857, -0.03771596151382, 0.01269999999994, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D2@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.03503159816351, 0.1191285719064, 0.1619533722648, False, 0, Nothing)
Part.Parameter("D2@Sketch4").SystemValue = 0.785398
boolstatus = Part.Extension.SelectByID("D3@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.1045246943377, 0.06294718636291, 0.1644849409235, False, 0, Nothing)
Part.Parameter("D3@Sketch4").SystemValue = 0.785398
boolstatus = Part.Extension.SelectByID("D4@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.1209576958292, -0.02474545381296, 0.1684283459496, False, 0, Nothing)
Part.Parameter("D4@Sketch4").SystemValue = 0.785398
boolstatus = Part.Extension.SelectByID("D5@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.05165285876088, -0.06495260794733, 0.1702296544183, False, 0, Nothing)
Part.Parameter("D5@Sketch4").SystemValue = 0.785398
boolstatus = Part.Extension.SelectByID("D6@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", 0.1142351571104, -0.05552941551001, 0.1697914983043, False, 0, Nothing)
Part.Parameter("D6@Sketch4").SystemValue = 0.785398
boolstatus = Part.Extension.SelectByID("D6@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", 0.09363493340657, -0.05657220207808, 0.169840182317, False, 0, Nothing)
Part.Parameter("D6@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("D5@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.04514396239825, -0.06279927778941, 0.170132286393, False, 0, Nothing)
Part.Parameter("D5@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("D4@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.1166043297817, -0.01608978504267, 0.1680388738483, False, 0, Nothing)
Part.Parameter("D4@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("D3@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.08717891881527, 0.06291330785201, 0.1644849409235, False, 0, Nothing)
Part.Parameter("D3@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("D2@Sketch4@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.04912292550466, 0.1202391154962, 0.1619046882521, False, 0, Nothing)
Part.Parameter("D2@Sketch4").SystemValue = 0.750492
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.SetPickMode
Part.ClearSelection2 True
' MSGBOX
' The sketch has a problem that prevents its feature from rebuilding successfully.
'      Click "Yes" to see the problem.
'      Click "No" to exit the sketch and rebuild anyway.

boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
' MSGBOX
' The sketch cannot be used for a feature because an endpoint is wrongly shared by multiple entities.

Part.InsertSketch2 True
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.0547796620117, 0.03193835982367, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
' MSGBOX
' The sketch has a problem that prevents its feature from rebuilding successfully.
'      Click "Yes" to see the problem.
'      Click "No" to exit the sketch and rebuild anyway.

boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
' MSGBOX
' The sketch has both open and closed contours.

Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", -0.129782026515, -0.1022671933762, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.04699164797504, -0.07005615835642, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch6", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.03098432884262, 0.06020029214577, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1212961805825, 0.2293126352431, 0.01261083061127, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc59", "SKETCHSEGMENT", 0.06666885041557, 0.01346657068268, 0.01269999999994, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc59", "SKETCHSEGMENT", 0.0699558290023, 0.03119878215424, 0.1658967772909, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.103669, 0.0850182, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D3@Sketch6").SystemValue = 0.147535
boolstatus = Part.Extension.SelectByID("Point22", "SKETCHPOINT", 0, 0.1566672038563, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, 0.206375, 0, True, 0, Nothing)
Set Annotation = Part.AddDimension2(0.24588, 0.183495, 0.0127)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D3@Sketch6@Rotating Manifold Plate.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D4@Sketch6").SystemValue = 0.0497078
Part.ViewZoomTo2 -0.0732082, 0.258022, 0.154437, 0.0872406, 0.100826, 0.154437
Part.ClearSelection2 True
Part.CreateCircle 0, 0.1566672038563, 0, -0.001030795247022, 0.1491179198044, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.006092828176081, 0.1571046819917, 0.1602426583935, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.027123, 0.1466, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D5@Sketch6").SystemValue = 0.015875
Part.ClearSelection2 True
Part.CreateLine2 0.04990263833689, 0.1912385098458, 0, 0.01316862972592, 0.1412446957024, 0
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.03264681035542, 0.1753236589654, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.02195488297635, 0.1600194907688, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.00882815075954, 0.1578558359654, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point236", "SKETCHPOINT", 0.005705172815639, 0.1524752078878, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point22", "SKETCHPOINT", 0, 0.1566672038563, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgCOINCIDENT"
Part.ClearSelection2 True
Part.EditUndo 1
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04540181117102, 0.1271343011563, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point22", "SKETCHPOINT", 0, 0.1566672038563, 0, False, 0, Nothing)
Part.SketchAddConstraints "sgFIXED"
boolstatus = Part.Extension.SelectByID("Point236", "SKETCHPOINT", 0.005705172815639, 0.1524752078878, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point22", "SKETCHPOINT", 0, 0.1566672038563, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point236", "SKETCHPOINT", 0.005705172815639, 0.1524752078878, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgCOINCIDENT"
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.0200486743537, 0.1638544765607, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0.0009534644324627, 0.1852450243011, 0.1589781440819, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.04278020985549, 0.1846083623299
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.03787570218802, 0.180934630885
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.01084217128773, 0.1647357951896
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.006749955608949, 0.160349216601
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.004013438083787, 0.161712179949
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.004011300107793, 0.1628068222656
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.002550462518615, 0.1630676679298
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.003098835011644, 0.1638875817578
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.007196395630411, 0.1622376089609
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.006373569643868, 0.1608709079294
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.004289535531107, 0.1494155830934
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00382834461437, 0.1490370044784
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.007207796405296, 0.1537768114164
Part.CreateCircle 0, 0.1566672038563, 0, 0.002669087883931, 0.1528780943459, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc62", "SKETCHSEGMENT", 0.003657350976476, 0.1591811097915, -0.001585604654437, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0093042, 0.163286, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D6@Sketch6").SystemValue = 0.009525
Part.ClearSelection2 True
Part.CreateLine2 0.02706771391309, 0.09834379929485, 0, 0.01746804032847, 0.1693641827996, 0
Part.CreateLine2 -0.06108198365704, 0.1548475941995, 0, 0.003014943997658, 0.166620500919, 0
boolstatus = Part.Extension.SelectByID("Arc62", "SKETCHSEGMENT", -0.004851787811217, 0.1594041438037, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.03627081483702, 0.1550635915239, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", -0.03531499163489, 0.1619790238358, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
Part.EditUndo 1
Part.SetPickMode
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point48", "SKETCHPOINT", -0.02911549766813, 0.1163788334126, 0, False, 0, Nothing)
Part.SketchAddConstraints "sgFIXED"
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.02904457372424, 0.1559927458205, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", -0.03374692657829, 0.1607182704491, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.03564322035122, 0.1547479430629, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
Part.EditUndo 1
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", 0.005702992863471, 0.09550349549896, 0.1933977609863, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0116361, 0.077622, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D7@Sketch6").SystemValue = 0.0889
boolstatus = Part.Extension.SelectByID("Point48", "SKETCHPOINT", -0.02911549766813, 0.1163788334126, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", 0.01169119908402, 0.1058468241805, 0.1929322816106, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", -0.03781593197483, 0.1680736643892, 0.1901394053564, False, 0, Nothing)
' MSGBOX
' A dimension could not be created from the selected items.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.03061693751761, 0.1550525487807, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", -0.03406041676856, 0.1610333054243, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.03469967925415, 0.1553749455847, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.01932257494423, 0.1533828971017, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc62", "SKETCHSEGMENT", 0.003932692674123, 0.1540418008816, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.008593900476252, 0.1282500364561, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", 0.01362018330987, 0.1285546421739, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.01923475789311, 0.1084206241023
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.005794596552914, 0.1424045248555
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.007371991438429, 0.1556359938155
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc63", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.01867544734048, 0.1578590297284
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04945029903866, 0.1616922092042
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.002829363211353, 0.1637599500442
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.002751149096531, 0.1617521749711
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.003864953961503, 0.1614525287778
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line10", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.003939536850325, 0.1616011185031
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.1143039909032, 0.1342387323007
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.151472969245, 0.1830441620617
boolstatus = Part.Extension.SelectByID("D2@Sketch6@Rotating Manifold Plate.SLDPRT", "DIMENSION", -0.02720641368783, 0.1133032168427, 1.341996190969, False, 0, Nothing)
Part.ClearSelection2 True
Part.CreateCircle 0, 0.1566672038563, 0, 0.00797062647344, 0.1593948134615, 0
boolstatus = Part.Extension.SelectByID("Arc61", "SKETCHSEGMENT", -0.00282807391046, 0.149894406704, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgCORADIAL"
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.008154726001776, 0.1454295901641, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.01147087610208, 0.1619718513268, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
Part.CreateLine2 0.009492814173816, 0.1805039328325, 0, 0.02116779354946, 0.09821986169282, 0
Part.CreateLine2 -0.06299724969022, 0.1566672038563, 0, -0.005386089374226, 0.1737245759034, 0
boolstatus = Part.Extension.SelectByID("Arc63", "SKETCHSEGMENT", -0.04720516519728, 0.1559055684626, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line12", "SKETCHSEGMENT", -0.01653477441959, 0.1666366963416, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc64", "SKETCHSEGMENT", -0.005127985565246, 0.1628058182303, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
boolstatus = Part.Extension.SelectByID("Point269", "SKETCHPOINT", -0.003109121142266, 0.1642872600479, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.EditUndo 1
boolstatus = Part.Extension.SelectByID("Line12", "SKETCHSEGMENT", -0.04994890219789, 0.1580268157743, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
Part.CreateLine2 -0.05775901706648, 0.1635433798775, 0, 0.005386089374226, 0.175905285828, 0
boolstatus = Part.Extension.SelectByID("Arc63", "SKETCHSEGMENT", -0.04191460173513, 0.159069067983, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line13", "SKETCHSEGMENT", -0.0093501048747, 0.1655647195442, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc64", "SKETCHSEGMENT", -0.004703583364724, 0.1636513446962, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line11", "SKETCHSEGMENT", 0.01450960103252, 0.1523996101468, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc64", "SKETCHSEGMENT", 0.007969386698208, 0.1587600493498, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line11", "SKETCHSEGMENT", 0.01212538466196, 0.1221470620824, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc63", "SKETCHSEGMENT", 0.01571875258043, 0.1221400437767, 0.01269999999994, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.003779501544786, 0.1780228175661
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.003332783390088, 0.165751537091
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.007138352408823, 0.1661672820182
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line14", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.007138352408823, 0.1661672820182
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line11", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.01821722780792, 0.1026689902553
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line13", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.05311910769108, 0.1582445964341
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc63", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.03007638528728, 0.1596807129702
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc63", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.01213819567269, 0.1287062912359
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc64", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.007456412050367, 0.1611176551893
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc64", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.007116449713058, 0.1549531160461
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc21", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.0008092023720847, 0.1493320523045
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch4", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, -0.0006145464725356, 0.2100775137043, 0
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", -0.07574297621355, 0.1514040743915, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point7", "SKETCHPOINT", -0.1031875, 0.178725992706, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point39", "SKETCHPOINT", -0.1407474115579, 0.1509331201717, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", -0.06821962267978, 0.1626528180341, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc4", "SKETCHSEGMENT", -0.1408744883364, 0.09020812366605, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc17", "SKETCHSEGMENT", -0.1759761385454, 0.04146845158214, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
Part.CreateLine2 0, 0, 0, -0.300210466659, -0.1948210948713, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", -0.04588689354664, 0.07488549175723, 1.569118081614, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.06973631948293, 0.02622227019096, 1.571307686155, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.101092, -0.0250069, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D4@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("Arc5", "SKETCHSEGMENT", -0.2211309256453, -0.03353294010314, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point11", "SKETCHPOINT", -0.206375, 0, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc5", "SKETCHSEGMENT", -0.2211284813291, -0.03228145179819, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc6", "SKETCHSEGMENT", -0.2112537795211, -0.09737837845854, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc18", "SKETCHSEGMENT", -0.179841698751, -0.01734417319975, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point44", "SKETCHPOINT", -0.2058722808724, 0.01439599226894, 0, True, 0, Nothing)
Part.ClearSelection2 True
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.04598202963777, 0.02617587503462, 1.571307686155, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", -0.01356397725363, -0.01885033620264, 1.573328859578, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0612536, -0.111438, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D5@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", -0.01239210648825, -0.05897049520805, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.04860954508739, -0.03887586866907, 0.01269999999994, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc7", "SKETCHSEGMENT", -0.07768983211294, -0.2052676506705, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc8", "SKETCHSEGMENT", 0.04355518119725, -0.2192708815074, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc9", "SKETCHSEGMENT", 0.07117991988036, -0.1580016752719, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc10", "SKETCHSEGMENT", 0.141283003334, -0.1118333516073, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc19", "SKETCHSEGMENT", -0.1587222978596, -0.08621754142798, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point46", "SKETCHPOINT", -0.1603834977957, -0.1298759957029, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point49", "SKETCHPOINT", -0.02872184871063, -0.2043665726865, 0, True, 0, Nothing)
Part.ClearSelection2 True
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line10", "SKETCHSEGMENT", 0.0539823663552, -0.001496692681793, 1.572542847691, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.106584545875, 0.04586140179544, 1.570409386856, True, 0, Nothing)
Set Annotation = Part.AddDimension2(0.100133, -0.0566873, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D6@Sketch4").SystemValue = 0.750492
boolstatus = Part.Extension.SelectByID("Line10", "SKETCHSEGMENT", 0.03763403497814, -0.05030775108673, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.06145187704459, -0.01781545031424, 0.01269999999994, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0.2414941668201, -0.01316112354253, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc12", "SKETCHSEGMENT", 0.2091740645371, 0.08201547574276, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc16", "SKETCHSEGMENT", -0.1045030578164, 0.1489572603393, 0.01269999999994, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point39", "SKETCHPOINT", -0.1407474115579, 0.1509331201717, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point54", "SKETCHPOINT", 0.2018652111014, -0.04290777519251, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc13", "SKETCHSEGMENT", 0.1192726911434, 0.1410112392997, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Arc15", "SKETCHSEGMENT", 0.0335802624249, -0.2054849753502, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Line10", "SKETCHSEGMENT", 0.02515377601073, -0.03901993783879, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Line9", "SKETCHSEGMENT", -0.06237425026297, -0.04510644984018, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Line11", "SKETCHSEGMENT", 0.08910350320594, 0.05722012727573, 0.01269999999994, False, 0, Nothing)
Part.EditDelete
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch6", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.InsertSketch2 True
swApp.LoadFile2 "C:\Program Files\SolidWorks\data\templates\Part.prtdot", ""
Set Part = swApp.ActiveDoc
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.NewDocument ("C:\Program Files\SolidWorks\data\templates\Part.prtdot", 0, 0.000000, 0.000000)
Set Part = swApp.ActivateDoc ("Part1")
boolstatus = Part.Extension.SelectByID("Front", "PLANE", 0, 0, 0, False, 0, Nothing)
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.02159, 0.02196547826087, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.01896165217391, 0.02421834782609, 0, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0429923, 0.0512528, 0)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch1").SystemValue = 0.0889
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, 0, -0.05763591304348, 0 ).ConstructionGeometry = TRUE
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point3", "SKETCHPOINT", 0, -0.05763591304348, 0, True, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0677738, -0.0358582, 0)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch1").SystemValue = 0.049784
Part.ClearSelection2 True
Part.CreateCircle 0, -0.05763591304348, 0, -0.0001877391304348, -0.06589643478261, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.007321826086957, -0.06477, 0, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0414903, -0.0643945, 0)
Part.ClearSelection2 True
Part.Parameter("D3@Sketch1").SystemValue = 0.015875
Part.ClearSelection2 True
Part.CreateCircle 0, -0.05763591304348, 0, 0.0009386956521739, -0.06289260869565, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", -0.005068956521739, -0.05726043478261, 0, False, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0399884, -0.0576359, 0)
Part.ClearSelection2 True
Part.Parameter("D4@Sketch1").SystemValue = 0.009525
Part.ClearSelection2 True
Part.CreateLine2 0.07152860869565, 0.01370495652174, 0, 0, -0.0944327826087, 0
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.04524513043478, -0.01220304347826, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
Part.EditUndo 1
Part.SetPickMode
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0, -0.007851913043478, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point1@Origin", "EXTSKETCHPOINT", 0, 0, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgCOINCIDENT"
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.05538304347826, -0.01107660869565, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.04524513043478, -0.009199217391304, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.01107660869565, -0.06401904347826, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.003567043478261, -0.05688495652174, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
Part.EditUndo 1
Part.SetPickMode
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", -0.007697304347826, -0.04899991304348, 0, False, 0, Nothing)
' MSGBOX
' The sketch is over defined.  Consider deleting some over defining dimensions or relations.

Part.SketchAddConstraints "sgFIXED"
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Part1.SLDPRT", "DIMENSION", 0.07077765217391, -0.03172791304348, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.006195391304348, -0.07077765217391, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.008448260869565, -0.05200373913043, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgTANGENT"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.05951330434783, -0.005444434782609, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", -0.0005632173913044, -0.01107660869565, 0, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.00394252173913, -0.06514547826087
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00394252173913, -0.06401904347826
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.001314173913044, -0.06063973913043
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.001314173913044, -0.06063973913043
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.05538304347826, -0.008072782608696
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.04937539130435, -0.01558234782609
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 3.216945804628e-005, -0.04184339232969
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.001491580932043, -0.04224972576704
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.00606283210231, -0.04387505951647
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.005961248742971, -0.04387505951647
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.001962253285492, -0.04407822623515
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.005314504143688, -0.04468772639119
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.006228754377742, -0.04448455967251
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, -0.007992915929756, -0.04864947740542
boolstatus = Part.Extension.SelectByID("D3@Sketch1@Part1.SLDPRT", "DIMENSION", 0.03396715546156, -0.05638053834847, 0.1176319138853, False, 0, Nothing)
Part.EditDelete
' MSGBOX
' The sketch is no longer over defined.

Part.ShowNamedView2 "*Trimetric", 8
Part.ClearSelection2 True
Part.FeatureManager.FeatureExtrusion True, False, False, 0, 0, 0.00635, 0.00254, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 1, 1, 1
Part.SelectionManager.EnableContourSelection = 0
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 481
swApp.ActiveDoc.ActiveView.FrameHeight = 188
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 376
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 0.214930643101, -0.01210585223791, 0.4204167300823, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.3208845018978, -0.2111062510012, 0.4134776851084, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.04370604585939, -0.4239200847754, 0.3992206503896, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1314753645179, -0.1350985417065, 0.3930277941008, True, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", -0.01557050263659, -0.2902005480527, 0.506476, False, 0, Nothing)
Part.ShowNamedView2 "*Front", 1
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2889150369645, -0.08426604943487, 0.426200346414, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.215835563963, -0.08406524670971, 0.4980785558598, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1258016998248, -0.1198034783645, 0.5064759999999, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1258154332669, -0.1183560179739, 0.506476, False, 0, Nothing)
Part.EditAssembly
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2849238096065, -0.07799012651506, 0.4598786423334, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2167907553568, -0.08214722672522, 0.4999000508133, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.003601877526956, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2689399384023, -0.2718200963541, 0.4759799879807, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2470005216457, -0.229156759997, 0.5017795728172, True, 1, Nothing)
' MSGBOX
' Warning: This mate is over defining the assembly.  Consider deleting some of the over defining mates.

Set Feature = Part.AddMate2 (1, -1, False, 0.06238981647726, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Concentric2", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Concentric4", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch4", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch4", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch4", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0510104, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0595121, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0425087, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0573682
Part.ActiveView().RotateAboutCenter 0.0510104, -0.0688419
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0573682
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0573682
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0917891
Part.ActiveView().RotateAboutCenter -0.0170035, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0425087, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0255052, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0170035, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.0255052, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, 0
Part.ActiveView().RotateAboutCenter -0.0340069, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0255052, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, 0
Part.ActiveView().RotateAboutCenter -0.0255052, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0340069, 0
Part.ActiveView().RotateAboutCenter -0.0170035, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0255052, 0.0344209
Part.ActiveView().RotateAboutCenter -0.0340069, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.0340069, 0
Part.ActiveView().RotateAboutCenter -0.0340069, 0
Part.ActiveView().RotateAboutCenter -0.0170035, 0
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0510104, 0
Part.ActiveView().RotateAboutCenter -0.0595121, 0
Part.ActiveView().RotateAboutCenter -0.0255052, 0
Part.ActiveView().RotateAboutCenter -0.0510104, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
boolstatus = Part.Extension.SelectByID("", "FACE", -0.06026615185868, -0.05536489038502, 0.3827495694033, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.04020699940747, -0.08228924603401, 0.3633632217582, True, 0, Nothing)
' MSGBOX
' Warning: This mate is over defining the assembly.  Consider deleting some of the over defining mates.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-27@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-29@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-30@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-32@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-33@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-35@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-36@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-37@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("4 inch Collection Tube-37@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.UnfixComponent
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.06957390073211, -0.03824036996937, 0.4601791087442, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.05481561364826, -0.08847983500871, 0.3599200567466, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1740488597385, -0.203582456661, 0.3985889425122, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.127680900796, -0.2268216317642, 0.3592642823148, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.05999282045735, -0.3615323864186, 0.3591309431484, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1445299179515, -0.2969803287202, 0.4080764582214, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1017010375971, -0.4379506227754, 0.4042707639147, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.07737167765123, -0.4304823909503, 0.3638213318659, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.02876545273424, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2147938467645, -0.3852297508676, 0.3852706328972, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.229792923203, -0.3791823713535, 0.3625735913178, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.01800390213504, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2703705097456, -0.2735759910151, 0.3698726000711, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.3027173876989, -0.2759182550427, 0.3575393966512, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2870519692448, -0.08772080889827, 0.3796485724619, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2646679914818, -0.175239286375, 0.3800460960423, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.05392124214103, -0.2967860881467, 0.506476, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1240183267486, -0.1366107128086, 0.493776, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.0127, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1917121374365, -0.2658764411872, 0.493776, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1788645280697, -0.3438424938158, 0.506476, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.0127, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1178155412668, -0.34190235508, 0.506476, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.0960771302789, -0.3596181192628, 0.493776, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.0127, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01835241458724, -0.5095467469699, 0.493776, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04922684489117, -0.5187566207648, 0.506476, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.0127, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1900840023015, -0.4689684016939, 0.493776, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.243863671232, -0.4353982040721, 0.5078891294119, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2895365485859, -0.3221891422109, 0.493776, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2925267465021, -0.320503800212, 0.506476, True, 1, Nothing)
' MSGBOX
' Warning: This mate is over defining the assembly.  Consider deleting some of the over defining mates.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2639849305772, -0.1792128934977, 0.4820972775149, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2635521859258, -0.1434377010173, 0.493776, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2328858069641, -0.091601962656, 0.506476, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2609571197997, -0.1396471686318, 0.493776, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.0127, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2834593142171, -0.2853674074338, 0.493776, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2747573137479, -0.2549403357692, 0.506476, True, 1, Nothing)
' MSGBOX
' Warning: This mate cannot be solved.   Consider :

'      o Deleting this mate.

'      o Moving the assembly closer to the desired solution with dragging.

'      o Adding more mates to further define the assembly.

'      o Changing the mating scheme.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2933348591051, -0.3133342886807, 0.4591115695459, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident2", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2888659834349, -0.2952463492423, 0.493776, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1987824329509, -0.3484484134801, 0.506476, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.0127, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1882212888568, -0.3259343552421, 0.383032, True, 1, Nothing)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1366196988607, -0.1974827295224, 0.383032, False, 0, Nothing)
Part.ViewZoomtofit2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04059874049125, -0.306904510414, -0.0008697091346193, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Rotating Manifold Plate-2@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident4", "MATE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident3", "MATE", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2013269295658, -0.2536226705834, 0.09415509301786, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.202162885509, -0.1317022449898, 0.1288715999379, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04982752086158, -0.3041677441826, -0.000869709134605, False, 0, Nothing)
Part.TranslateComponent
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Coincident1", "MATE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04786758356062, -0.2670789238539, -0.02206538357541, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.05386837565374, -0.2757471733772, -0.02206538357541, False, 0, Nothing)
Part.TranslateComponent
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2713639379066, -0.2526704118235, -0.03900236412605, False, 0, Nothing)
Part.FixComponent
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.0569484253694, -0.2562919777208, -0.1624463641261, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1775631643638, -0.2357399289634, -0.1241801753902, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1786462866906, -0.1103914054394, -0.03263955601712, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.09993174139662, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1986787683293, -0.3896600395974, -0.07628183529148, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2017263387208, -0.2619782998531, -0.03367058230481, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.09993174139662, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.09551519763636, -0.4867882649435, -0.1410854133061, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1374609648714, -0.3742369034284, -0.03300287299157, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.1017302029001, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2410064537058, -0.114431170918, -0.162446364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1517313241475, -0.2409210020456, -0.3172246659432, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.1547783018172, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.0531018605011, -0.1803272945287, -0.175146364126, True, 1, Nothing)
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1484982689927, -0.2173764738345, -0.02630236412602, True, 1, Nothing)
' MSGBOX
' Please select two non-parallel faces.

Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2108711837861, -0.1564624225016, -0.1767350285852, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.137436904664, -0.1588454924189, -0.02630236412602, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 376
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 495
swApp.ActiveDoc.ActiveView.FrameHeight = 188
Set Part = swApp.ActivateDoc ("Part1")
Part.ClearSelection2 True
Part.SaveAs2 "X:\900403 AUV GULPER\Bottle Closure Paddle.SLDPRT", 0, FALSE, FALSE
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle.SLDPRT", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.3950389934915, -0.2452837508997, -0.09754936412605, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.06333366109244, -0.05340497400431, -0.02630236412608, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.07245051797747, -0.02106294684148, -0.09980593526325, False, 0, Nothing)
Part.TranslateComponent
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.09447879403575, -0.1672231679747, -0.0263023641262, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.CreateLine2 0.03067344374854, -0.035105593263, 0, 0.03067344374854, -0.145261835284, 0
Part.ViewZoomTo2 -0.0387295, 0.0455963, -0.086406, 0.148046, -0.145262, -0.086406
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.02810411415043, -0.08949806419295, 0.02773431005608, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.04602818342971, -0.06925050445154, -0.02630236412608, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1044473721918, -0.0400409100705, -0.02630236412608, False, 0, Nothing)
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.CreateLine2( 0.03067344374854, -0.035105593263, 0, 0.03067344374854, -0.1117371871876, 0 ).ConstructionGeometry = TRUE
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04038542087882, -0.07987217513556, 0.02773431005608, False, 0, Nothing)
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch5", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch5", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch4", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.0177018406744, -0.1050986430101, -0.02630236412608, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1170606061291, -0.08252759280657, -0.02630236412608, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 376
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Rotating Manifold Plate.SLDPRT")
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1171690848153, 0.06513196241059, 0.01269999999994, False, 0, Nothing)
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.1742215176165, 0.1096165902611, 0
Part.ClearSelection2 True
Part.CreateLine2( 0, 0, 0, 0, 0.3152025313206, 0 ).ConstructionGeometry = TRUE
Part.CreateCircle 0, 0.1262277972723, 0, 0.01670040211831, 0.1136787283181, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.02438920399834, 0.2096369175242, 1.563054561347, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.03185709815922, 0.1924904983503, 0.01264013672159, True, 0, Nothing)
Set Annotation = Part.AddDimension2(0.269339, 0.160742, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch7").SystemValue = 0.049784
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.02191314630521, 0.2221314465384, 1.562493124285, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.02065316297608, 0.2171380302633, 1.56271769911, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0904979, 0.131055, 0.0127)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch7").SystemValue = 0.00635
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.08699318976872, 0.2569754771988, 1.560921100512, False, 0, Nothing)
Part.EditDelete
Part.ClearSelection2 True
Part.FeatureManager.FeatureCut True, False, False, 1, 0, 0.00635, 0.00635, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
boolstatus = Part.Extension.SelectByID("", "FACE", 0.002969882189689, 0.1577136864119, 0.006030650027753, False, 0, Nothing)
Part.ActivateSelectedFeature
Part.DeSelectByID "Cut-Extrude3", "BODYFEATURE", 0.002541342742688, 0.1584942083606, 0.009976272625295
boolstatus = Part.Extension.SelectByID("Cut-Extrude3", "BODYFEATURE", 0.002875601049652, 0.1579369359583, 0.01014853256009, True, 0, Nothing)
Part.ActivateSelectedFeature
boolstatus = Part.Extension.SelectByID("Extrude1", "BODYFEATURE", 0.1087982767327, 0.06101471447975, 0.0127, True, 0, Nothing)
Part.DeSelectByID "Extrude1", "BODYFEATURE", 0.1087982767327, 0.06101471447975, 0.0127
boolstatus = Part.Extension.SelectByID("Extrude1", "BODYFEATURE", 0.07781188427151, 0.118682754642, 0.01269999999988, True, 0, Nothing)
Part.DeSelectByID "Extrude1", "BODYFEATURE", 0.07781188427151, 0.118682754642, 0.01269999999988
boolstatus = Part.Extension.SelectByID("Cut-Extrude2", "BODYFEATURE", 0.0334797144593, 0.02131211805465, 0.006060227752698, True, 0, Nothing)
Part.DeSelectByID "Cut-Extrude2", "BODYFEATURE", 0.0334797144593, 0.02131211805465, 0.006060227752698
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.002969882189689, 0.1577136864119, 0.006030650027753, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch7", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", -0.0263414505296, 0.1469606676, 0.04045364921806, False, 0, Nothing)
Part.Extension.RotateOrCopy True, 8, False, 0, 0, 0, 0, 0, 1, 0.7504915783576
boolstatus = Part.Extension.SelectByID("Unknown", "MANIPULATOR", 0.04349173533698, 0.1473670644008, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.08395511409006, 0.1400512211532, 0.01270000000005, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Arc11", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
Part.InsertSketch2 True
Part.Save2 FALSE
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 376
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 481
swApp.ActiveDoc.ActiveView.FrameHeight = 188
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 188
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03082346287533, -0.08386756916592, 0.02456253306843, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03384152257064, -0.0846800662295, -0.02872047576778, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.004547081735347, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.01167599800567, -0.04032691615826, 0.02138431005591, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.01093137599372, -0.07892194262332, -0.02630236412625, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.04768667418212, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.009379141636941, -0.01773669335972, -0.0199523641262, True, 1, Nothing)
Part.DeSelectByID "", "FACE", 0.009379141636941, -0.01773669335972, -0.0199523641262
boolstatus = Part.Extension.SelectByID("", "FACE", -0.007032893106384, -0.04160346844691, -0.0199523641262, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1933428315415, 0.09297524844561, -0.1177838299744, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1462214283868, 0.1130869988532, -0.08277884736702, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.244245256978, 0.0478157934445, -0.1373292569724, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2167033540476, 0.03370570936215, -0.09830868920005, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2627520131836, -0.009435887750783, -0.1114722397223, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2987513501188, -0.03226830715141, -0.1418184434919, True, 0, Nothing)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1237702255017, 0.1062646523373, -0.08277884736697, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2202134492365, 0.03790102351448, -0.0983086892, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2008564868954, 0.1102497274796, -0.1177838299743, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2410051655286, -0.01526793080515, -0.1114722397222, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2376000845219, 0.04163467954066, -0.1373292569722, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.3092503711455, -0.01725193361483, -0.1418184434917, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2048782437221, 0.1157286098678, -0.1673072995528, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1120842883031, -0.04863510510197, 0.1433339961396, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2423360909573, -0.1196004326252, -0.03093791092829, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.1666646777845, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1675642292996, -0.1625543692331, -0.03101345631552, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2105644195455, -0.1864906591497, 0.1451460738144, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2347514192438, -0.3224240579293, -0.02993797023839, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.08364242607445, -0.2039615590908, 0.1717318018922, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.2014008233626, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1821769180171, -0.2732612378439, -0.02564107198458, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2361567740612, -0.3351462506774, 0.174200594112, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.05627549770168, -0.4007758460414, 0.1630123353474, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1231660536878, -0.3716941675523, -0.0257911391858, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.07877395211807, -0.3071881398802, 0.1634898040649, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1865509491952, -0.4153854756767, -0.02653410658161, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.01773194631966, -0.3895557650316, 0.1336133127577, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.03447751786683, -0.4260965710011, -0.02632205996156, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Unknown", "POINTREF", 0.03067344374854, -0.241480593263, -0.03900236412605, True, 1, Nothing)
Part.DeSelectByID "Unknown", "POINTREF", 0.03067344374854, -0.241480593263, -0.03900236412605
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.01056313699928, -0.3989750374631, -0.02633240325116, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.003619900932449, -0.5002123536532, 0.1343634898304, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1449064617311, -0.4219361595725, 0.0608466842217, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.0882056498296, -0.3414184123161, -0.02617109207949, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1362393289672, -0.2895091186808, 0.05991419805974, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.09264643530594, -0.3613226210192, -0.02611634958123, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2026965253436, -0.2040036812824, 0.009500122896952, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2104979507496, -0.2394233954944, -0.02589438086483, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1703106713537, -0.277134018792, 0.009221547482355, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1228958089256, -0.2325505139392, -0.02550836190829, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1161099179719, -0.06022425951744, 0.0157890173125, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1114003211285, -0.1285559268448, -0.02646817050805, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.07490073466496, -0.1246999916124, -0.02642740911904, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1042125073622, -0.1397614225534, 0.01555916898738, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04998051914922, -0.03733666675333, -0.01995236412606, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2184895409511, -0.143132963795, 0.1460618389103, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1660142030364, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.034657016696, -0.01568152746484, -0.01995236412608, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2430398789178, -0.298063268548, 0.1747180651403, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1946704292663, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01575555120777, -0.0282527335379, -0.01995236412611, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1731175034478, -0.4375195825555, 0.1627755217795, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1827278859056, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02795590559114, -0.01309683772143, -0.01995236412611, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.008209268853136, -0.4620454084625, 0.1337600995273, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1537124636533, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.0313644797148, -0.05563963960344, -0.01995236412608, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1129225719553, -0.3626643147637, 0.06051867190172, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.08047103602786, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01521919976349, -0.02924959660987, -0.01995236412611, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1622793711868, -0.2389695571021, 0.009021256419942, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.02897362054602, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.04571023987532, -0.03649629149913, -0.01995236412614, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1022016617901, -0.120455791629, 0.01609039680179, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.03604276092786, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03517052321959, -0.04754946805559, -0.01995236412614, True, 1, Nothing)
Part.DeSelectByID "", "FACE", 0.03517052321959, -0.04754946805559, -0.01995236412614
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02530901198048, -0.03283645776065, -0.01995236412614, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2379507171597, 0.7938486629037, 0.6251731709328, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.3024535973307, 0.7745055993375, 0.619279128312, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.3871660418847, 0.758214572207, 0.6058693101938, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.467477950423, 0.7315229123886, 0.5983128452954, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.5331091835545, 0.6965279305979, 0.5964969680584, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.5524383202453, 0.6022934747842, 0.679952880452, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.5910826295215, 0.52674931478, 0.7544200881084, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-10@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-11@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-13@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-12@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-9@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-14@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-15@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-16@AUV Water Sampler", "COMPONENT", 0, 0, 0, True, 0, Nothing)
Part.TranslateComponent
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2471642769916, -0.1033326516324, -0.603179218371, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1995985903061, -0.2632028914984, -0.1753458564029, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.239736209963, -0.1004905742627, -0.6032604218753, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.184899353501, -0.2693594773631, -0.1751463641261, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2320143864664, -0.328586623969, -0.603239400758, True, 1, Nothing)
Part.DeSelectByID "", "FACE", 0.184899353501, -0.2693594773631, -0.1751463641261
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1791523563884, -0.2747234243003, -0.1751463641261, True, 1, Nothing)
Part.DeSelectByID "", "FACE", 0.1791523563884, -0.2747234243003, -0.1751463641261
Part.DeSelectByID "", "EDGE", 0.2320143864664, -0.328586623969, -0.603239400758
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2284096732937, -0.3329253821976, -0.1750498901602, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1809160769237, -0.2728062900406, -0.1727357474568, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2303612770689, -0.3299367537129, -0.6014340303058, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.07737886909035, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
' MSGBOX
' Some of the models referenced in this document have been modified.  They must be saved when the document is saved.
' 		Save the document and the referenced models now?

Part.Save2 FALSE
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1757819746558, -0.3011440026, -0.175146364126, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2383256883, -0.299972115691, -0.5968756471706, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.4217292830445, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.08382509039467, -0.06769721095452, -0.6790882443457, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "VERTEX", 0.04978887822885, -0.1581521292145, -0.6883532844872, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.08701194179559, -0.1127685042592, -0.6958031127524, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1097719127284, -0.1774628630526, -0.7154047154383, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2469235997219, -0.1682203041622, -0.7116082444112, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2574612113357, -0.2696528023749, -0.6151637560192, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2037278454235, -0.3670808473889, -0.2112548374839, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2078569346844, -0.3792439365938, -0.3279938070017, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1227738263817, -0.3122994928409, -0.256513385027, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.03381319360956, -0.2040859900846, -0.1747219937574, False, 0, Nothing)
Part.ClearSelection2 True
Part.EditUndo 1
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01995143176522, -0.1282875098265, -0.1751463641259, False, 0, Nothing)
Part.FixComponent
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.0004234400257275, -0.2039536740718, -0.1774734391921, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.01331356374898, -0.1971629024853, -0.1771252860885, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.08350813244743, -0.144144025011, -0.01674412858711, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2894125378787, -0.3864322923609, -0.5532123246906, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "VERTEX", 0.06088955522334, -0.06770603969157, -0.02630236412605, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1388301892679, -0.1302386958087, -0.2634577600509, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.0006756152441767, -0.2153041121491, -0.2738659913634, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2379199039347, -0.2866510503721, -0.1814963641261, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.7738487328318, -1.122569807266, -1.21983754717, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2382114890169, -0.1019720548531, -0.2134326573999, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1786409557171, -0.1091759457575, -0.175246764937, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2069878823691, -0.1891577533681, -0.2134421643283, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1642384415666, -0.1632048223516, -0.1751368616107, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.03003575346884, -0.07927129247273, -0.3229331545393, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.02867960093448, -0.08842944337975, -0.1752953886428, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.06702766997125, -0.013107875486, -0.3229704311161, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.0656231004977, -0.023356735872, -0.1753100607737, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1406371105485, -0.03943033477814, -0.3251202914142, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.07750939159851, -0.1294406576704, -0.1751891160824, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.07409458144205, -0.09991912381314, -0.1752849190016, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.08393793788511, -0.09369537487105, -0.3253133273532, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.07480304093653, -0.1295569738023, -0.1750819878501, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1123957298392, -0.1350723179604, -0.325165377236, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1726121227651, -0.2893578531335, -0.3551095685746, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1271073585439, -0.2346387927105, -0.1753048711929, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1593509665604, -0.1529051521919, -0.3550601571239, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.2071793539121, -0.2052522908254, -0.1752310646797, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1323026441929, -0.4385087860105, -0.2526203821672, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.09332716396428, -0.3386673614899, -0.1750765882312, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.04803682139675, -0.3004664565049, -0.2527224774287, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.1538716640397, -0.3428623500543, -0.1750622017685, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1499241572, -0.4384772564578, -1.255824194934, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.005652305215222, -0.395188835779, -0.1751878549857, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.02418986413443, -0.4180122780275, -0.1751530274173, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.08247089475555, -0.3703793668305, -1.255888206791, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.07405064680563, -0.5539139692849, -0.346248635462, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.118207162075, -0.3666386890542, -0.1752750470751, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1625684069193, -0.3321768264303, -0.3461612959784, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1633998093259, -0.3766198928774, -0.1752661811329, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2319375932957, -0.283578625317, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1173853317684, -0.429684767153, -0.3460742672965, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1645779031705, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2317097942968, -0.2585226198375, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02070776837161, -0.4262818460768, -1.255858574116, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 1.07436220999, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2111103549962, -0.2985088328711, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1616213049335, -0.3735955826616, -0.2526821832174, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.0711858190914, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.224731911647, -0.2831741800763, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1361461472682, -0.2290024050205, -0.3551419543518, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1736455902258, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2321608983848, -0.2657031452553, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1962869965906, -0.1656265193459, -0.2134415618207, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.03194519769473, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2111635598211, -0.2689965962899, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02961944930155, -0.03914261851194, -0.175146364126, True, 1, Nothing)
' MSGBOX
' Warning: This mate is over defining the assembly.  Consider deleting some of the over defining mates.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2412699830549, -0.2696289890809, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1225890283945, -0.08115851455889, -0.3250857168037, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.1435893526777, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2442034968078, -0.3024798410134, -0.181496364126, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1829105317413, -0.2180865625094, -0.181496364126, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02091535385307, -0.0753653831008, -0.1751463641259, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01249385130058, -0.07428271267784, -0.175146364126, False, 0, Nothing)
Part.TranslateComponent
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01593715173067, -0.07574891103678, -0.175146364126, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-10@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident28", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03423529655674, -0.07673662257969, -0.175146364126, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1947199165363, -0.1074735187816, -0.1814963641259, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 0.00635, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
swApp.LoadFile2 "C:\Program Files\SolidWorks\data\templates\Part.prtdot", ""
Set Part = swApp.ActiveDoc
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.NewDocument ("C:\Program Files\SolidWorks\data\templates\Part.prtdot", 0, 0.000000, 0.000000)
Set Part = swApp.ActivateDoc ("Part2")
boolstatus = Part.Extension.SelectByID("Top", "PLANE", 0, 0, 0, False, 0, Nothing)
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.CreateLine2 0, 0, 0, 0.03848652173913, 0, 0
Part.CreateLine2 0.03848652173913, 0, 0, 0.03848652173913, 0.07040217391304, 0
Part.CreateLine2 0.03848652173913, 0.07040217391304, 0, 0.009574695652174, 0.07040217391304, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point3", "SKETCHPOINT", 0.03848652173913, 0.07040217391304, 0, True, 0, Nothing)
' MSGBOX
' The fillet could not be added because the specified radius would eliminate one of the elements.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point3", "SKETCHPOINT", 0.03848652173913, 0.07040217391304, 0, True, 0, Nothing)
' MSGBOX
' The fillet could not be added because the specified radius would eliminate one of the elements.

Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point3", "SKETCHPOINT", 0.03848652173913, 0.07040217391304, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point7", "SKETCHPOINT", 0.03848652173913, 0.07040217391304, 0, False, 1, Nothing)
Part.SketchFillet2 0.0254, 2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point2", "SKETCHPOINT", 0.03848652173913, 0, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point10", "SKETCHPOINT", 0.03848652173913, 0, 0, False, 1, Nothing)
Part.SketchFillet2 0.0254, 2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.008823739130435, 0.07040217391304
Part.CreateLine2 0.01308652173913, 0.07040217391304, 0, -0.01107660869565, 0.07040217391304, 0
Part.CreateLine2 0, 0, 0, 0, 0.08654773913043, 0
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, -0.007697304347826, 0.06890026086957
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.0001877391304348, 0.0782872173913
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.001689652173913, 0.06364356521739
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Right", "PLANE", 0, 0, 0, False, 0, Nothing)
Part.InsertSketch2 True
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.03083844016727, -0.0220234819843, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.01924326086957, 0.01550579280518, -0.03504340092799, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0, 0.0211825, -0.0434533)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch2").SystemValue = 0.0762
Part.ClearSelection2 True
Part.InsertSketch2 True
Part.ViewZoomtofit2
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.03848652173913, 0.04377458727158, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.1222705288728, -0.6063270528232, 0.0756580553983, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0852096, 0, -0.0334882)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch1").SystemValue = 0.0508
boolstatus = Part.Extension.SelectByID("Point1", "SKETCHPOINT", 0, -0.03119782608696, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point1@Origin", "EXTSKETCHPOINT", 0, 0, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgCOINCIDENT"
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", -0.03732034321554, -0.007668245058312, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.03848652173913, 0.0254, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", -0.03732034321554, -0.007668245058312, 0, False, 1, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.03848652173913, 0.0254, 0, True, 4, Nothing)
Dim SweepFeature As Object
Set SweepFeature = Part.FeatureManager.InsertProtrusionSwept2(False, False, 0, False, False, 0, 0, False, 0, 0, 0, 0, 1, 1, 1)
boolstatus = Part.Extension.SelectByID("Sweep1", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.SetPickMode
Part.SetPickMode
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Part2.SLDPRT", "DIMENSION", 0.1970753570372, -0.07863853757491, -0.03286731267573, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Part2.SLDPRT", "DIMENSION", 0.1970724710938, -0.0785706277337, -0.0325291146876, False, 0, Nothing)
Part.Parameter("D2@Sketch1").SystemValue = 0.0762
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Part2.SLDPRT", "DIMENSION", 0.1970724710938, -0.0785706277337, -0.0325291146876, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0.1784722062613, -0.1199057963646, -0.1014448604926, False, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0144117, 0, -0.154613)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Part2.SLDPRT", "DIMENSION", 0.1970724710938, -0.0785706277337, -0.0325291146876, False, 0, Nothing)
Part.Parameter("D3@Sketch1").SystemValue = 0.0254
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0.1666093336434, -0.1102078226403, 0.02387946885854, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.0165062, 0, 0.045155)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D3@Sketch1@Part2.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D4@Sketch1").SystemValue = 0.0254
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D3@Sketch1@Part2.SLDPRT", "DIMENSION", 0.05623933919013, 0.3182266143628, -0.1290971515295, False, 0, Nothing)
Part.Parameter("D3@Sketch1").SystemValue = 0.0508
boolstatus = Part.Extension.SelectByID("D4@Sketch1@Part2.SLDPRT", "DIMENSION", 0.1082543308112, 0.2927946866257, 0.06665379210119, False, 0, Nothing)
Part.Parameter("D4@Sketch1").SystemValue = 0.0508
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch1@Part2.SLDPRT", "DIMENSION", 0.1287094117767, 0.2280092171664, -0.2288053180428, False, 0, Nothing)
Part.Parameter("D1@Sketch1").SystemValue = 0.0381
Part.ClearSelection2 True
Part.InsertSketch2 True
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 481
swApp.ActiveDoc.ActiveView.FrameHeight = 141
boolstatus = Part.Extension.SelectByID("Part2.SLDPRT", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.SaveAs2 "X:\900403 AUV GULPER\Inlet Tube.SLDPRT", 0, FALSE, FALSE
boolstatus = Part.Extension.SelectByID("Inlet Tube.SLDPRT", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 141
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.6208243513803, -0.05549962589373, -0.1262241166757, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.5685054829448, -0.03981623460311, -0.1155461094167, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.5685054829449, -0.04474291456563, -0.1348618131561, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1185102917468, -0.1962912360792, -0.02630236412602, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.3223942466068, 0, 0, 1, 1, 1.570796326795, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.5613546665099, 0.01615319152432, -0.027959941348, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.06870542446819, -0.2317750650542, -0.02289969346549, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1269491077466, -0.02247501732477, -0.02630236412625, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("X:\900403 AUV GULPER\Rotating Manifold Plate.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 282
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("Rotating Manifold Plate.SLDPRT")
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point1@Origin", "EXTSKETCHPOINT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1712147759016, 0.06929861091893, 0.01268863927982, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point20@Sketch6", "EXTSKETCHPOINT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Point230@Sketch6", "EXTSKETCHPOINT", -0.1407474115589, 0.1509331201718, 0, True, 0, Nothing)
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 282
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("Inlet Tube.SLDPRT")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 282
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0.01336385229138, 0.1554314149548, 0.0006836203790312, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0.020605046109, 0.1554314149548, -0.151381449791, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.04004, 0, -0.0676551)
Part.ClearSelection2 True
Part.Parameter("D5@Sketch1").SystemValue = 0.206375
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Inlet Tube.SLDPRT", "DIMENSION", 0.1360115725773, 0.1554314149548, -0.07172831779718, False, 0, Nothing)
Part.EditDelete
Part.CreateLine2( 0.0889, 0.168275, 0, 0.0889, 0.2496564597787, 0 ).ConstructionGeometry = TRUE
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.07130945839611, 0.2475384984866, -0.1989817339229, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0.02764293930759, 0.2475384984866, -0.207607219175, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.09017770738497, 0.2475384984866, -0.2011381052359, True, 0, Nothing)
Part.SketchMirror
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.07670038667864, 0.1973644554382
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.03896388870091, 0.205450847862
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
Part.CreateCircle 0, 0, 0, -0.02643399943844, -0.02333855072464, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.3293625450461, 0.03408753623188, -0.006549188967358, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0, 0.0178904, 0.0143598)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch2").SystemValue = 0.06985
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 0.1356826384869, 0.3975524577136, -0.2073748433398, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0.009715184808293, 0.3970220540894, -0.003652469608222, True, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.0477185, 0, -0.09368)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch1").SystemValue = 0.206375
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", 0.101661072868, 0.3969049003159, -0.2051229469381, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", 0.09381882760356, 0.3967900025029, -0.2010074924649, False, 0, Nothing)
Set Annotation = Part.AddDimension2(-0.00745542, 0, -0.263244)
Part.ClearSelection2 True
Part.Parameter("D2@Sketch1").SystemValue = 0.04445
boolstatus = Part.Extension.SelectByID("Arc2", "SKETCHSEGMENT", 0.0696546099258, 0.3980684533471, -0.01750529425439, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.141373, 0, 0.0112076)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Inlet Tube.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D3@Sketch1").SystemValue = 0.04445
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch2@Inlet Tube.SLDPRT", "DIMENSION", 0.008061987437554, 0.3965658171643, -0.0479905404458, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("D1@Sketch2@Inlet Tube.SLDPRT", "DIMENSION", 0.004102414679463, 0.3964886891806, -0.04791288472625, False, 0, Nothing)
Part.Parameter("D1@Sketch2").SystemValue = 0.0635
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sweep1", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("D2@Sketch2@Inlet Tube.SLDPRT", "DIMENSION", 0.1983855312379, 0.01865714741692, 0.01149442616156, False, 0, Nothing)
Part.Parameter("D2@Sketch2").SystemValue = 0.0762
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", -0.01370243626774, 0.03555071364021, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.09525, 0.07015803076896, 0, True, 0, Nothing)
Part.DeSelectByID "Sketch1", "SKETCH", 0.09524999998412, 0.04444881171552, 0
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.09524999995639, 0.04444803093718, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", -0.01370243626774, 0.03555071364021, 0, False, 1, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.09524999995639, 0.04444803093718, 0, True, 4, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D3@Sketch1@Inlet Tube.SLDPRT", "DIMENSION", 0.2367695813584, -0.09887536076905, 0.01520061009534, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("D3@Sketch1@Inlet Tube.SLDPRT", "DIMENSION", 0.2367695813584, -0.09887536076905, 0.01520061009534, False, 0, Nothing)
Part.Parameter("D3@Sketch1").SystemValue = 0.0508
boolstatus = Part.Extension.SelectByID("D2@Sketch1@Inlet Tube.SLDPRT", "DIMENSION", 0.1765649796416, -0.1901923439019, -0.2462853869271, False, 0, Nothing)
Part.Parameter("D2@Sketch1").SystemValue = 0.0508
Part.ShowNamedView2 "*Normal To", 0
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.0980870143493, 0.1174506622654, -0.1044499712482, False, 0, Nothing)
Part.SketchAddConstraints "sgVERTICAL"
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 0.1084207764116, 0.1174506622654, -0.2223764324296, False, 0, Nothing)
Part.EditDelete
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.1011263561323, 0.1239017586595
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Arc3", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 0, 0.1029499612021, 0.1767863056842
Part.CreateLine2 0.1016, 0.0508, 0, 0.1016, 0.2642282916505, 0
boolstatus = Part.Extension.SelectByID("Point16", "SKETCHPOINT", 0.127, 0.206375, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.SetPickMode
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 0.0, 0.0, 0.0, False, 0, Nothing)
Part.SketchTrim 1, 1, 0.1033901516733, 0.2287621663705
boolstatus = Part.Extension.SelectByID("Point16", "SKETCHPOINT", 0.1016, 0.206375, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Point16", "SKETCHPOINT", 0.1016, 0.206375, 0, False, 1, Nothing)
Part.SketchFillet2 0.0508, 2
Part.ClearSelection2 True
Part.InsertSketch2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 5.339657904419e-007, 0.03174999999551, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.04583037457971, 0, 0, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Sketch2", "SKETCH", 5.339657904419e-007, 0.03174999999551, 0, False, 1, Nothing)
boolstatus = Part.Extension.SelectByID("Sketch1", "SKETCH", 0.04583037457971, 0, 0, True, 4, Nothing)
Set SweepFeature = Part.FeatureManager.InsertProtrusionSwept2(False, False, 0, False, False, 0, 0, False, 0, 0, 0, 0, 1, 1, 1)
Part.Save2 FALSE
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 282
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 282
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("Concentric49", "MATE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Coincident39", "MATE", 0, 0, 0, True, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1189078755868, -0.2356999041455, 0.1129565476125, False, 0, Nothing)
Part.RotateComponent
Part.RotateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2296758811289, -0.1134719854853, 0.0549436999047, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2516476582408, -0.1449630071238, -0.01951286144572, True, 0, Nothing)
Part.ClearSelection2 True
Part.ViewDisplayHiddengreyed
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2416337136212, -0.1528629061714, -0.02609025358475, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2261256686362, -0.1149315692111, 0.05484499549823, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 1, False, 0.01, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.06772444489874, -0.3007286754079, 0.2025037109983, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02876535857519, -0.2811221985183, -0.03342914336622, True, 1, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 0.03836943435903, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.240166078146, -0.1257064555341, 0.03999542550287, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1752759776197, -0.06641558144258, -0.02630236412614, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 1, False, 0.06629778962894, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
Part.ViewDisplayShadedWithEdges
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02547367355777, -0.2025690301415, 0.04823987138559, False, 0, Nothing)
Part.EditPart
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02785396897838, -0.3401327027806, -0.0263023641262, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.CreateCircle 0, 0, 0, 0.0005695482730299, 0.02076451547325, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Arc1", "SKETCHSEGMENT", 0.02250838941256, -0.2187473243078, -0.01499936412606, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.1778, -0.104054, 0.0279714)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch3@Inlet Tube.Part").SystemValue = 0.0254
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02108489804931, -0.2412188830341, 0.03456517079185, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch3@Inlet Tube-1@AUV Water Sampler", "DIMENSION", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02108489804931, -0.2412188830341, 0.03456517079185, True, 1, Nothing)
Part.FeatureManager.FeatureExtrusion False, False, False, 4, 0, 0.00635, 0.2032, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 1, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.EditAssembly
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.1732655527272, -0.1610624044699, -0.03897110320418, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-6@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-3@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-3@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.2509382674035, -0.1389781391331, -0.01962961297414, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.194628303131, -0.1428454326743, -0.1814963641261, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Bottle Closure Paddle-9@AUV Water Sampler", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Concentric35", "MATE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1660260026435, -0.1193849595711, -0.1772036579902, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.08453972474041, -0.1136621463376, -0.02462893555423, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.08396920013209, -0.1125552779213, -0.02333428550089, True, 0, Nothing)
Part.DeSelectByID "", "EDGE", 0.08453972474041, -0.1136621463376, -0.02462893555423
Set Feature = Part.AddMate2 (1, 0, False, 0.1488439999999, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1849288381804, -0.1008884416893, -0.01995236412597, False, 0, Nothing)
Part.TranslateComponent
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2168488932456, -0.299117174861, -0.0199523641262, False, 0, Nothing)
Part.CompConfigProperties3 2, 0, True, True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1122216499861, -0.1338445404359, -0.01995236412631, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03837807235463, -0.03019945079765, -0.01995236412631, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "VERTEX", -0.06820491217036, -0.12753488554, -0.1751463641261, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.08089775348238, -0.1370192233802, -0.1744270919021, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.09206037161368, -0.106140089032, -0.0199523641262, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1122355831487, -0.1126944024741, -0.0199523641262, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.02059550053163, -0.05590275305909, -0.01995236412631, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.09863623363739, -0.1433846950792, -0.01995236412631, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1729350131444, -0.4003433151956, -0.01995236412608, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.009728262044291, -0.4664710838913, -0.01995236412625, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1252274449678, -0.3928844351576, -0.0199523641262, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1645437741985, -0.2462468380449, -0.0199523641262, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1184050761382, -0.1307233434047, -0.01995236412637, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.0335944221047, -0.05675809899401, -0.01995236412631, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1053755993503, -0.09092643545921, -0.0199523641262, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1499654940399, -0.2324182210558, -0.0199523641262, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1150269890829, -0.390102629319, -0.01995236412625, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.002279611238251, -0.4121590503711, -0.01995236412625, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.182594005689, -0.4038313752326, -0.01995236412608, True, 0, Nothing)
Part.SelectedFaceProperties 0, 0, 0, 0, 0, 0, 0, 0, "Face3"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1242939618921, -0.1181093953029, -0.181496364126, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.03900729939038, -0.05297695854466, -0.1814963641259, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1001770230709, -0.06409968463799, -0.181496364126, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1542313779886, -0.2176128950214, -0.181496364126, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.1180733227838, -0.3603932127958, -0.1814963641259, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.01797128924761, -0.4494431838351, -0.1814963641259, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1581218143887, -0.4197139071279, -0.1814963641259, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2313471141783, -0.2889389931027, -0.1814963641259, True, 0, Nothing)
Part.SelectedFaceProperties 0, 0, 0, 0, 0, 0, 0, 0, "Face2"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1122142101549, -0.02102707830534, -0.02630236412625, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1262588164708, -0.03422673853464, -0.1624463641262, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1299892461728, -0.04204592378915, -0.02630236412608, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.01302044137888, -0.1206185458576, -0.0263023641262, False, 0, Nothing)
Part.ClearSelection2 True
Part.ViewDisplayHiddengreyed
Part.ViewDisplayShaded
boolstatus = Part.Extension.SelectByID("", "FACE", 0.1320094252335, -0.03364959274211, -0.1624463641262, False, 0, Nothing)
Part.ClearSelection2 True
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 282
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 495
swApp.ActiveDoc.ActiveView.FrameHeight = 141
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 495
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.EditAssembly
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 495
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
boolstatus = Part.Extension.SelectByID("AUV Water Sampler.SLDASM", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("Gulper AUV Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2079382532864, -3.345764076433, 4.902147797936, False, 0, Nothing)
Part.RotateComponent
Part.RotateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", -0.2613112861922, -3.330423745231, 4.803477981719, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 3.209280759616, 0.5378082057898, -2.917560524316, True, 0, Nothing)
Set Feature = Part.AddMate2 (1, 0, False, 8.424877380178, 0, 0, 1, 1, 0.5235987755983, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "FACE", 0.2173924300582, 0.7711028915078, -2.957643947894, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/CAP, Slotted.Rmvble. NOSE, ODIII-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.3046520807814, 0.7226760122489, -3.011328869445, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.FixComponent
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "VERTEX", -0.08182676555314, 0.7531752396822, -2.983977523077, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 1.667257053242, 0.8858347560405, -2.82808944135, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Fairing Assembly-1@Gulper AUV Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "VERTEX", 1.860339090247, -0.1231968457342, -0.1066162963953, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 3.441988477315, 0.9849538820756, -2.478620538206, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 3.365853301412, 0.9856621949343, -2.479745035315, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 3.103008602287, 0.5899744191295, -2.51182854485, True, 0, Nothing)
Set Feature = Part.AddMate2 (3, 0, False, 0.3983626407099, 0, 0, 1, 1, 2.916079431176, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "VERTEX", 3.405437392489, 1.043610013697, -2.707127059255, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 3.324505595957, 0.756919940196, -2.447793653635, False, 0, Nothing)
Part.TranslateComponent
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.3794694553494, 0.4179575132649, -2.793619424108, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 0.05483677270706, 0.5898650588139, -2.844710077127, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Foam, Nose SectionTOP-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.1551825147752, 0.5614536230428, -2.7588601625, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/SeaBirdSBE 49FastCat-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Altmtr[1].PSA-916-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Sonar Clamp2-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.1710011898282, 0.5754324542593, -2.828610250783, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Sonar Clamp2-2@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.2952070121505, 0.5914924980517, -2.822777680701, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Modified Sonar Ring Clamp2-2@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.186411211621, 0.728535741748, -2.829671660005, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Modified Sonar Ring Clamp2-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.2790393875354, 0.7346176643058, -2.827281277674, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("8 inch Extension 6kwh Battery Nose Assy-2@Gulper AUV Assembly/Sonar Extension bar-1@8 inch Extension 6kwh Battery Nose Assy", "COMPONENT", 0.1776425224752, 0.6085108763244, -2.852535168829, False, 0, Nothing)
Part.HideComponent2
Part.ClearSelection2 True
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0192062, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.0288094, 0
Part.ActiveView().RotateAboutCenter -0.0384125, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0192062, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.0192062, 0
Part.ActiveView().RotateAboutCenter -0.0288094, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.0192062, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0288094, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.0192062, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0288094, -0.0917891
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0288094, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0288094, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.PrintDirect
Part.ActiveView().RotateAboutCenter -0.0192062, 0.0344209
Part.ActiveView().RotateAboutCenter -0.345712, 0.275367
Part.ActiveView().RotateAboutCenter -0.278491, 0.137684
Part.ActiveView().RotateAboutCenter -0.0960312, 0.103263
Part.ActiveView().RotateAboutCenter 0.0192062, 0.0803155
Part.ActiveView().RotateAboutCenter 0.115237, 0.160631
Part.ActiveView().RotateAboutCenter 0.00960312, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0192062, 0.103263
Part.ActiveView().RotateAboutCenter 0.0192062, 0.0803155
Part.ActiveView().RotateAboutCenter 0.00960312, 0.0573682
Part.ActiveView().RotateAboutCenter -0.00960312, 0.12621
Part.ActiveView().RotateAboutCenter 0, 0.114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00960312, 0.172105
Part.ActiveView().RotateAboutCenter 0, 0.0803155
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00960312, 0.137684
Part.ActiveView().RotateAboutCenter -0.00960312, 0.0688419
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.0576187, 0.240946
Part.ActiveView().RotateAboutCenter -0.115237, 0.149157
Part.ActiveView().RotateAboutCenter -0.115237, 0.286841
Part.ActiveView().RotateAboutCenter -0.0192062, 0.0688419
Part.ActiveView().RotateAboutCenter 0.0384125, 0.183578
Part.ActiveView().RotateAboutCenter 0.0672219, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0480156, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0480156, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0192062, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0480156, 0
Part.ActiveView().RotateAboutCenter 0.0288094, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.00960312, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.0576187, 0
Part.ActiveView().RotateAboutCenter 0.0288094, 0
Part.ActiveView().RotateAboutCenter 0.00960312, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00960312, 0.172105
Part.ActiveView().RotateAboutCenter -0.163253, 0.183578
Part.ActiveView().RotateAboutCenter -0.0672219, 0.103263
Part.ActiveView().RotateAboutCenter -0.0192062, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0576187, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0672219, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0480156, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0576187, -0.0229473
Part.ActiveView().RotateAboutCenter 0.076825, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0384125, -0.0458946
Part.ActiveView().RotateAboutCenter 0.0384125, -0.103263
Part.ActiveView().RotateAboutCenter 0.0192062, -0.103263
Part.ActiveView().RotateAboutCenter 0.0192062, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00960312, 0
Part.ActiveView().RotateAboutCenter 0.00960312, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00960312, 0
Part.PrintDirect
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
Set Part = swApp.ActivateDoc ("AUV Water Sampler.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 141
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Part.ClearSelection2 True
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.0170035, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0765156, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0510104, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0340069, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0170035, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ViewZoomTo2 -0.261944, 0.283149, 0.190187, 0.389782, -0.431647, 0.190187
Part.ViewDisplayHiddenremoved
Part.ViewDisplayHiddengreyed
Part.PrintDirect
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0688419
Part.ActiveView().RotateAboutCenter 0.0340069, -0.114736
Part.ActiveView().RotateAboutCenter 0.0510104, -0.12621
Part.ActiveView().RotateAboutCenter 0.0340069, -0.12621
Part.ActiveView().RotateAboutCenter 0.0425087, -0.114736
Part.ActiveView().RotateAboutCenter 0.0425087, -0.12621
Part.ActiveView().RotateAboutCenter 0.0425087, -0.103263
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0917891
Part.ActiveView().RotateAboutCenter 0.0425087, -0.114736
Part.ActiveView().RotateAboutCenter 0.0255052, -0.0573682
Part.ActiveView().RotateAboutCenter 0.00850173, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00850173, 0
Part.ActiveView().RotateAboutCenter -0.425087, 0.103263
Part.ActiveView().RotateAboutCenter -0.544111, 0.0917891
Part.ActiveView().RotateAboutCenter -0.238049, 0.0458946
Part.ActiveView().RotateAboutCenter -0.0935191, 0.0344209
Part.ActiveView().RotateAboutCenter -0.0680139, 0.0229473
Part.ActiveView().RotateAboutCenter -0.0425087, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, 0
Part.ViewZoomtofit2
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 141
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.LoadFile2 "C:\2003 Projects\MultiBeam AUV\15 Inch Forward Section.SLDDRW", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2003 Projects\MultiBeam AUV\15 Inch Forward Section.SLDDRW", 3, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("15 Inch Forward Section - 14.5" Forward")
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.InsertSurfaceFinishSymbol2 0, 0, 0.05224593073593, 0.1289576260441, 0, 0, 1, "", "", "", "", "c", "", ""
Part.InsertSurfaceFinishSymbol2 0, 0, 0.03381498701299, 0.1041711844857, 0, 0, 1, "", "", "", "", "c", "a", ""
Part.InsertSurfaceFinishSymbol2 0, 0, 0.02618838961039, 0.07811364336016, 0, 0, 1, "d", "", "", "", "c", "a", ""
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
Part.EditSketch
boolstatus = Part.Extension.SelectByID("DetailItem130@Drawing View1", "SFSYMBOL", 0.05542367965368, 0.140397522148, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("14.5" Forward", "SHEET", 0.06495692640693, 0.1581929160874, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("DetailItem131@Drawing View1", "SFSYMBOL", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("DetailItem132@Drawing View1", "SFSYMBOL", 0, 0, 0, True, 0, Nothing)
Part.EditSketch
Part.EditDelete
Part.EditSketch
boolstatus = Part.Extension.SelectByID("14.5" Forward", "SHEET", 0.07004132467532, 0.1639128641394, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("DetailItem130@Drawing View1", "SFSYMBOL", 0, 0, 0, True, 0, Nothing)
Part.EditSketch
Part.EditDelete
Part.EditSketch
Part.EditSketch
Set Part = Nothing
swApp.CloseDoc "15 Inch Forward Section - 14.5" Forward"
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
Part.ActiveView().RotateAboutCenter -0.161533, 0.12621
Part.ActiveView().RotateAboutCenter -0.19554, 0.0917891
Part.ActiveView().RotateAboutCenter -0.0765156, 0.0573682
Part.ActiveView().RotateAboutCenter -0.00850173, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0170035, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0595121, -0.0229473
Part.ActiveView().RotateAboutCenter 0.119024, -0.0688419
Part.ActiveView().RotateAboutCenter 0.119024, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0510104, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0425087, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0340069, 0
Part.ActiveView().RotateAboutCenter 0.0255052, 0
Part.ActiveView().RotateAboutCenter 0.00850173, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 330
swApp.ActiveDoc.ActiveView.FrameHeight = 196
Set Part = swApp.ActivateDoc ("Rotating Manifold Plate.SLDPRT")
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
Set Part = swApp.ActivateDoc ("Inlet Tube.SLDPRT")
boolstatus = Part.Extension.SelectByID("Solid Bodies", "BDYFOLDER", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Solid Bodies", "BDYFOLDER", 0, 0, 0, False, 0, Nothing)
Part.SelectedFeatureProperties 0, 0, 0, 0, 0, 0, 0, 1, 0, "Solid Bodies"
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
Set Part = Nothing
swApp.CloseDoc "MARS Shore Station Assembly.SLDASM"
Set Part = swApp.ActivateDoc ("Inlet Tube.SLDPRT")
swApp.LoadFile2 "C:\2004 PROJECTS\MARS Shore Station\MARS Shore Station Assembly.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2004 PROJECTS\MARS Shore Station\MARS Shore Station Assembly.SLDASM", 2, 0, "", longstatus, longwarnings)
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
' MSGBOX
' The internal ID of document C:\2003 Projects\MultiBeam AUV\TailSection\TailSection\base.SLDPRT, which is already open, does not match the internal ID saved with the referencing document.  Select YES to accept this document anyway.

boolstatus = Part.Extension.SelectByID("20ft PG&E ISO Container-1@MARS Shore Station Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("20ft ISO Container-3@MARS Shore Station Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("20ft ISO Container-3@MARS Shore Station Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "C:\2004 PROJECTS\MARS Shore Station\20ft ISO Container.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2004 PROJECTS\MARS Shore Station\20ft ISO Container.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("20ft ISO Container.SLDPRT")
Part.ClearSelection2 True
Part.ViewZoomtofit2
' MSGBOX
' C:\2004 PROJECTS\MARS Shore Station\20ft ISO Container.SLDPRT is being referenced by other open documents.  "Save As" will replace these references with the new name. Check "Save As Copy" in the "Save As" dialog if you wish to maintain existing references.  

Part.SaveAs2 "C:\2004 PROJECTS\MARS Shore Station\24ft Modular Enclosure.SLDPRT", 0, TRUE, FALSE
Set Part = Nothing
swApp.CloseDoc "20ft ISO Container.SLDPRT"
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
swApp.LoadFile2 "C:\2004 PROJECTS\MARS Shore Station\24ft Modular Enclosure.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2004 PROJECTS\MARS Shore Station\24ft Modular Enclosure.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("24ft Modular Enclosure.SLDPRT")
Part.ViewDisplayShadedWithEdges
boolstatus = Part.Extension.SelectByID("", "FACE", 0, 1.969783445003, -0.02495419316234, False, 0, Nothing)
Part.InsertSketch2 True
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.SketchRectangle -2.4384, 2.5908, 0, 0, 0, 0, 0
Part.ViewDisplayHiddenremoved
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
Part.FeatureManager.FeatureExtrusion True, False, True, 0, 0, 0.00254, 0.00254, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 1, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ViewDisplayHiddengreyed
boolstatus = Part.Extension.SelectByID("Extrude4", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 0, 2.525257119945, -0.2283476470899, True, 1, Nothing)
Part.DeSelectByID "", "FACE", 0, 2.525257119945, -0.2283476470899
boolstatus = Part.Extension.SelectByID("", "FACE", 6.0579, 1.747280968658, -0.4198082889975, True, 1, Nothing)
Part.SelectionManager.EnableContourSelection = 0
boolstatus = Part.Extension.SelectByID("Extrude4", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Extrude4", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch6", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 6.0579, 0.843789477928, -1.160412325405, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "VERTEX", 0.0254, 0.1571625, -2.393950007682, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 6.0579, 0.843789477928, -1.160412325405, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "VERTEX", 0.0254, 0.1571625, -2.393950007682, True, 1, Nothing)
Part.FeatureManager.FeatureExtrusion True, False, True, 3, 0, 0.00254, 0.00254, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 1, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ViewDisplayShadedWithEdges
boolstatus = Part.Extension.SelectByID("Extrude5", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
Part.ViewDisplayHiddenremoved
boolstatus = Part.Extension.SelectByID("Sketch6", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditSketch
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "VERTEX", 0.0254, 0.1571625, -2.393950007682, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "VERTEX", 0.0254, 0.1571625, -2.393950007682, False, 1, Nothing)
Part.FeatureManager.FeatureExtrusion True, False, True, 3, 0, 0.00254, 0.00254, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 1, 1, 1
Part.SelectionManager.EnableContourSelection = 0
boolstatus = Part.Extension.SelectByID("", "FACE", 0.4752821992247, 1.375912189841, 0, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.InsertSketch2 True
Part.ClearSelection2 True
Part.SketchRectangle 0.2530056097082, 2.141424585812, 0, 0.8971310025403, 0.1778810495981, 0, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0.4503988752535, 2.17259194353, -1.2192, False, 0, Nothing)
Set Annotation = Part.AddDimension2(1.34386, 3.09722, 0)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch7").SystemValue = 0.9144
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 1.208804579717, 1.196014735042, -1.2192, False, 0, Nothing)
Set Annotation = Part.AddDimension2(1.60359, 1.10251, 0)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch7@24ft Modular Enclosure.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D2@Sketch7").SystemValue = 2.1336
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.2841729674259, 1.123290900368, -1.2192, False, 0, Nothing)
Set Annotation = Part.AddDimension2(0.523123, 1.13368, 0)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D2@Sketch7@24ft Modular Enclosure.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D3@Sketch7").SystemValue = 2.1336
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0.8036289293872, 0.3025504804688, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.2633947289475, 0.583056699928, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgPERPENDICULAR"
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.1802817750336, 0.5622784614495, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", -0.01711149051167, 0.5103328652534, 0, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.2114491327513, 0.4687763882965, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 0.01405586720601, 0.541500222971, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.1802817750336, 0.5518893422103, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgPARALLEL"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0.2737838481867, 0.6661696538418, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 1.177637221999, 0.8531738001478, 0, True, 0, Nothing)
Part.SketchAddConstraints "sgPARALLEL"
Part.ClearSelection2 True
Part.ClearSelection2 True
Part.FeatureManager.FeatureCut True, False, False, 0, 0, 0.01524, 0.00254, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, 0
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0441589, 0
Part.ActiveView().RotateAboutCenter 0.0529907, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0529907, 0
Part.ActiveView().RotateAboutCenter 0.0353271, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0794861, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0441589, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0176636, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0176636, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0529907, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0618225, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0441589, 0
Part.ActiveView().RotateAboutCenter -0.0529907, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0441589, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0441589, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0441589, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0794861, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0803155
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0573682
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0573682
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0688419
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0917891
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0688419
Part.ActiveView().RotateAboutCenter 0, 0.0688419
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.103263
Part.ActiveView().RotateAboutCenter 0, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0917891
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0917891
Part.ActiveView().RotateAboutCenter 0.00883179, 0.137684
Part.ActiveView().RotateAboutCenter 0, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0917891
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
boolstatus = Part.Extension.SelectByID("", "FACE", 2.922153436385, 1.792200981043, -2.4384, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.SketchRectangle -3.691804077892, 1.995976916463, 0, -2.164603549726, 1.123290900368, 0, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
Part.FeatureManager.FeatureCut True, False, False, 0, 0, 0.01524, 0.01524, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter -0.00883179, -0.137684
Part.ActiveView().RotateAboutCenter -0.00883179, -0.390104
Part.ActiveView().RotateAboutCenter 0, -0.103263
Part.ActiveView().RotateAboutCenter 0, -0.103263
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.103263
Part.ActiveView().RotateAboutCenter 0, -0.149157
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.137684
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.103263
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0917891
Part.ActiveView().RotateAboutCenter 0, -0.137684
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0803155
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0344209
Part.ActiveView().RotateAboutCenter 0.0176636, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, -0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0353271, 0
Part.ActiveView().RotateAboutCenter 0.0529907, 0
Part.ActiveView().RotateAboutCenter 0.0529907, 0
Part.ActiveView().RotateAboutCenter 0.0441589, 0
Part.ActiveView().RotateAboutCenter 0.0441589, 0
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0529907, 0.172105
Part.ActiveView().RotateAboutCenter 0.0529907, 0.12621
Part.ActiveView().RotateAboutCenter 0.0441589, 0.12621
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0688419
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0573682
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0688419
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0803155
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0176636, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0688419
Part.ActiveView().RotateAboutCenter -0.0353271, -0.114736
Part.ActiveView().RotateAboutCenter -0.0441589, -0.114736
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0688419
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0529907, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0441589, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0529907, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0441589, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0529907, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0344209
Part.ActiveView().RotateAboutCenter -0.0618225, -0.0458946
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0458946
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0176636, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0573682
Part.ActiveView().RotateAboutCenter -0.0176636, -0.0688419
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
boolstatus = Part.Extension.SelectByID("", "FACE", 0, 0.6745472295549, -1.160924672639, False, 0, Nothing)
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.SketchRectangle -1.598111053113, 1.737347961322, 0, -0.8619410070649, 1.058916742415, 0, 0
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0, 1.730130607929, -1.280547503837, False, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line2", "SKETCHSEGMENT", 0, 0, 0, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line4", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line3", "SKETCHSEGMENT", 0, 0, 0, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("Line1", "SKETCHSEGMENT", 0, 1.730130607929, -1.280547503837, True, 0, Nothing)
Part.FeatureManager.FeatureCut True, False, False, 0, 0, 0.01524, 0.01524, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0688419
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0573682
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0529907, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0353271, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0618225, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0971497, -0.0229473
Part.ActiveView().RotateAboutCenter -0.0441589, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0353271, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0441589, 0
Part.ActiveView().RotateAboutCenter -0.0529907, -0.0114736
Part.ActiveView().RotateAboutCenter -0.0618225, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.0176636, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0458946
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0229473
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0344209
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, -0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0.103263
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0.0264954, 0.12621
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0803155
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0803155
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0114736
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.114736
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter 0, 0.0573682
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0.00883179, 0.12621
Part.ActiveView().RotateAboutCenter 0.00883179, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.103263
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter 0.0176636, 0.0573682
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0917891
Part.ActiveView().RotateAboutCenter 0.0264954, 0.0229473
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0264954, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0.0176636, 0
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0441589, 0
Part.ActiveView().RotateAboutCenter -0.0353271, 0
Part.ActiveView().RotateAboutCenter -0.0264954, 0
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter -0.0264954, -0.0114736
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 6.0579, 1.067533358792, -0.8192523526154, False, 0, Nothing)
Part.CreatePlaneAtOffset3  0.0635, True, True
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Plane2", "PLANE", 0, 0, 0, False, 0, Nothing)
Part.InsertSketch2 True
Part.ShowNamedView2 "*Normal To", 0
Part.ClearSelection2 True
Part.SketchRectangle 0, 2.531256834511, 0, -0.3000528891482, 1.737347961322, 0, 0
Part.EditDelete
Part.SketchRectangle 0.08968419405372, 2.4876125, 0, 2.393950007682, 0.04126991405419, 0, 0
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("Line8", "SKETCHSEGMENT", 5.978525, 1.867260322389, -2.392019926302, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 6.0579, 1.867260322389, -2.449758753443, True, 0, Nothing)
Set Annotation = Part.AddDimension2(5.9944, 1.78065, -2.73845)
Part.ClearSelection2 True
Part.Parameter("D1@Sketch10").SystemValue = 0.0635
boolstatus = Part.Extension.SelectByID("Line5", "SKETCHSEGMENT", 5.978525, 2.495170067548, -2.124977850775, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 6.0579, 2.574560954867, -2.088891083812, True, 0, Nothing)
Set Annotation = Part.AddDimension2(5.9944, 2.14874, -1.87237)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D1@Sketch10@24ft Modular Enclosure.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D2@Sketch10").SystemValue = 0.0635
boolstatus = Part.Extension.SelectByID("Line6", "SKETCHSEGMENT", 5.978525, 1.997172683456, -0.06803213387584, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 6.0579, 2.004390036849, 0.004141400050441, True, 0, Nothing)
Set Annotation = Part.AddDimension2(5.9944, 2.04048, -0.378378)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D2@Sketch10@24ft Modular Enclosure.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D3@Sketch10").SystemValue = 0.0635
boolstatus = Part.Extension.SelectByID("Line7", "SKETCHSEGMENT", 5.978525, 0.1062260945878, -0.9557666011691, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "EDGE", 6.0579, -0.009251559694208, -0.9196798342059, True, 0, Nothing)
Set Annotation = Part.AddDimension2(5.9944, 0.416572, -0.999071)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D3@Sketch10@24ft Modular Enclosure.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.Parameter("D4@Sketch10").SystemValue = 0.0635
Part.ActiveView().RotateAboutCenter 0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0458946
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0458946
Part.ActiveView().RotateAboutCenter -0.0176636, 0.0803155
Part.ActiveView().RotateAboutCenter -0.0176636, 0.0573682
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter -0.0353271, 0.103263
Part.ActiveView().RotateAboutCenter -0.0176636, 0.0688419
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0573682
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0688419
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0.0353271, 0.0803155
Part.ActiveView().RotateAboutCenter 0.0441589, 0.0803155
Part.ActiveView().RotateAboutCenter 0.0441589, 0.114736
Part.ActiveView().RotateAboutCenter 0.0353271, 0.103263
Part.ActiveView().RotateAboutCenter 0.0441589, 0.137684
Part.ActiveView().RotateAboutCenter 0.00883179, 0.0229473
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0344209
Part.ActiveView().RotateAboutCenter -0.00883179, 0.0344209
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter 0, 0.0114736
Part.ActiveView().RotateAboutCenter -0.00883179, 0
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ActiveView().RotateAboutCenter 0, -0.0114736
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("D4@Sketch10@24ft Modular Enclosure.SLDPRT", "DIMENSION", 0, 0, 0, False, 0, Nothing)
Part.FeatureManager.FeatureCut True, False, False, 0, 0, 5.9436, 0.01524, False, False, False, False, 0.01745329251994, 0.01745329251994, False, False, False, False, 0, 1, 1
Part.SelectionManager.EnableContourSelection = 0
Part.ViewDisplayHiddengreyed
boolstatus = Part.Extension.SelectByID("Cut-Extrude6", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.SelectionManager.EnableContourSelection = 0
boolstatus = Part.Extension.SelectByID("Cut-Extrude5", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.SelectionManager.EnableContourSelection = 0
boolstatus = Part.Extension.SelectByID("Cut-Extrude4", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.SelectionManager.EnableContourSelection = 0
' MSGBOX
' Invalid selection. Please select an axis, linear edge or a sketch line.

boolstatus = Part.Extension.SelectByID("Cut-Extrude7", "BODYFEATURE", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("Sketch10", "SKETCH", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
Part.ViewDisplayShadedWithEdges
boolstatus = Part.Extension.SelectByID("", "FACE", 5.309998255256, 1.657990331863, 0, False, 0, Nothing)
Part.SelectedFaceProperties 0, 0, 0, 0, 0, 0, 0, 0, "Cut-Extrude6"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 4.664746896882, 1.257036702813, 0, False, 0, Nothing)
Part.SelectedFaceProperties 0, 0, 0, 0, 0, 0, 0, 0, "Cut-Extrude6"
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 4.973454626113, 2.195209000422, 0, False, 0, Nothing)
Part.SelectedFaceProperties 0, 0, 0, 0, 0, 0, 0, 0, ""
Part.ClearSelection2 True
Part.Save2 FALSE
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
swApp.ActiveDoc.ActiveView.FrameWidth = 320
swApp.ActiveDoc.ActiveView.FrameHeight = 196
boolstatus = Part.Extension.SelectByID("24ft Modular Enclosure.SLDPRT", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Set Part = swApp.ActivateDoc ("MARS Shore Station Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 196
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
boolstatus = Part.Extension.SelectByID("", "FACE", 11.54822569864, -6.270288358605, -8.074041576593, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -3.837949039848, 0.02539999999988, 4.488944035568, True, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -1.431272768899, 2.350126758736, 5.4864, True, 0, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 14.71604368086, -6.008781368502, -8.074041576593, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.8110771990112, 2.310304603647, 5.4864, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 13.56044157659, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 10.72730441507, -4.27712070406, 3.59737275983, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -0.915539031355, 2.6162, 4.804263852197, True, 1, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 6.89332070406, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", 9.069262416488, 0.8889076834209, 3.695195629673, True, 1, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -5.793944046049, 1.923244560333, 3.092449992318, True, 1, Nothing)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "FACE", -0.384175, 0.4132099870439, 4.077627449368, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", -6.3627, 2.494721274796, 3.424836914892, False, 0, Nothing)
boolstatus = Part.Extension.SelectByID("", "FACE", 9.069262416488, 2.355155326525, 3.823590600176, True, 0, Nothing)
Set Feature = Part.AddMate2 (0, 0, False, 15.43196241649, 0, 0, 1, 1, 0, 0.5235987755983, 0.5235987755983, longstatus)
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("20ft ISO Container-3@MARS Shore Station Assembly", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.EditDelete
boolstatus = Part.Extension.SelectByID("", "FACE", -6.3627, 0.5469793717391, 4.867328197881, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "C:\2004 PROJECTS\MARS Shore Station\24ft Modular Enclosure.SLDPRT", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("C:\2004 PROJECTS\MARS Shore Station\24ft Modular Enclosure.SLDPRT", 1, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("24ft Modular Enclosure.SLDPRT")
Part.ClearSelection2 True
boolstatus = Part.Extension.SelectByID("", "EDGE", 4.173940516574, -0.008159942350687, 0.003290797307727, True, 0, Nothing)
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 0
Set Part = swApp.ActivateDoc ("Bottle Closure Paddle.SLDPRT")
swApp.ActiveDoc.ActiveView.FrameLeft = 640
swApp.ActiveDoc.ActiveView.FrameTop = 0
Set Part = swApp.ActivateDoc ("24ft Modular Enclosure.SLDPRT")
swApp.ArrangeWindows 1
swApp.ActiveDoc.ActiveView.FrameWidth = 320
swApp.ActiveDoc.ActiveView.FrameHeight = 188
swApp.LoadFile2 "E:\Multibeam\Complete Vehicle Assembly\MultiBeam Vehicle Assembly.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("E:\Multibeam\Complete Vehicle Assembly\MultiBeam Vehicle Assembly.SLDASM", 2, 0, "", longstatus, longwarnings)
Set Part = swApp.ActivateDoc ("MultiBeam Vehicle Assembly.SLDASM")
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.LoadFile2 "E:\Multibeam\MultiBeam Vehicle Assembly.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("E:\Multibeam\MultiBeam Vehicle Assembly.SLDASM", 2, 0, "", longstatus, longwarnings)
' MSGBOX
' A document named "MultiBeam Vehicle Assembly" is already opened. Do you want to show this already-opened document?

Set Part = Nothing
swApp.CloseDoc "MultiBeam Vehicle Assembly.SLDASM"
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("24ft Modular Enclosure.SLDPRT")
swApp.LoadFile2 "E:\Multibeam\MultiBeam Vehicle Assembly_04_27_2004.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("E:\Multibeam\MultiBeam Vehicle Assembly_04_27_2004.SLDASM", 2, 0, "", longstatus, longwarnings)
swApp.ActiveDoc.ActiveView.FrameLeft = 0
swApp.ActiveDoc.ActiveView.FrameTop = 0
swApp.ActiveDoc.ActiveView.FrameState = 1
swApp.ActiveDoc.ActiveView.FrameState = 1
Set Part = swApp.ActivateDoc ("MultiBeam Vehicle Assembly_04_27_2004.SLDASM")
' MSGBOX
' Save changes to Tail Cone Simple.SLDASM?

boolstatus = Part.Extension.SelectByID("MidBody-1@MultiBeam Vehicle Assembly_04_27_2004", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.OpenCompFile
swApp.LoadFile2 "E:\Multibeam\Mid-Section\MidBody\MidBody.SLDASM", ""
Set Part = swApp.ActiveDoc
Set Part = swApp.OpenDoc6 ("E:\Multibeam\Mid-Section\MidBody\MidBody.SLDASM", 2, 0, "", longstatus, longwarnings)
boolstatus = Part.Extension.SelectByID("MidBody-1@MultiBeam Vehicle Assembly_04_27_2004", "COMPONENT", 0, 0, 0, False, 0, Nothing)
Part.ClearSelection2 True
Part.ClearSelection2 True