% ASME DOCUMENT CLASS - asme.cls % for LaTeX version 2e - 2/14/01 % % WARNING: This is an unauthorized class file. It has not been thoroughly % tested so it probably still has bugs. I'll do my best to fix them when % found. % % --------------------------------------------------------------------------- % filename: asme.cls % version: 2.1 % date: 6/29/01 % ported by: Kenneth Sprott % address: Department of Mechanical Engineering % University of California, Davis % Davis, California 95616 % e-mail: kssprott@ucdavis.edu % description: This is a new version of the asme2e class file v1.0. % New features in this file include: % 1. Eliminating the pifont package from the file. % It was not required and had caused some problems. % 2. Fixed the font size definitions. It is now possible % to use 10, 11, and 12pt font. The old size definition % was incorrect and the default 12pt was actually 10pt. % The default is now 10pt. % 3. Add support for the new reference format required by % ASME. This requires the use of Bibtex. % 4. Eliminate the subfigure code held over from the original % ASME style file. Usepackage subfigure instead. % 5. Add cleanhead option to eliminate the banner on the title % page. % 6. Add cleanfoot option to eliminate the copyright on each % footer. % usage: \documentclass[options]{asme} % --------------------------------------------------------------------------- \NeedsTeXFormat{LaTeX2e} \ProvidesClass{asme2e}[2001/2/14 v2.0 Standard LaTeX document class] \RequirePackage{ifthen} \RequirePackage{times} % Loads the Times-Roman Fonts \RequirePackage{mathptm} % Loads the Times-Roman Math Fonts \newboolean{@titlepage} \newcommand\@ptsize{} \newboolean{@cleanfoot} \newboolean{@cleanhead} % ------------------------------------------------------- % Options % ------------------------------------------------------- \DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue} \DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse} \DeclareOption{draft}{\setlength\overfullrule{5pt}} \DeclareOption{final}{\setlength\overfullrule{0pt}} \DeclareOption{titlepage}{\@titlepagetrue} \DeclareOption{notitlepage}{\@titlepagefalse} \DeclareOption{twocolumn}{\@twocolumntrue} \DeclareOption{cleanfoot}{\@cleanfoottrue} \DeclareOption{cleanhead}{\@cleanheadtrue} \DeclareOption{10pt}{\renewcommand\@ptsize{0}} % Corresponds to 10pt font \DeclareOption{11pt}{\renewcommand\@ptsize{1}} % Corresponds to 11pt font \DeclareOption{12pt}{\renewcommand\@ptsize{2}} % Corresponds to 12pt font \ExecuteOptions{oneside,onecolumn,10pt,final} \ProcessOptions \newcommand\today{\ifcase\month\or January\or February\or March\or April\or May\or June\or July\or August\or September\or October\or November\or December\fi \space\number\day, \number\year} \newcommand\currenttime{\minute\time\hour\minute\divide\hour60 \the\hour:\multiply\hour60\advance\minute-\hour\the\minute} % ------------------------------------------------------ % Font and Size Definitions % ------------------------------------------------------ \setlength\lineskip{1\p@} \setlength\normallineskip{1\p@} \renewcommand{\baselinestretch}{1} % These next conditional statements set up the font size definitions % for either 10, 11, or 12 pt font. The default is 10pt. \ifthenelse{\@ptsize = 0}{ \typeout{Ten Point} \renewcommand\normalsize{% \@setfontsize\normalsize\@xpt{12}% \abovedisplayskip 18\p@ \@plus2\p@ \@minus5\p@ \abovedisplayshortskip \abovedisplayskip \belowdisplayshortskip \abovedisplayskip \belowdisplayskip \abovedisplayskip \let\@listi\@listI} \normalsize \newcommand\small{% \@setfontsize\small\@ixpt{11}% \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@ \abovedisplayshortskip \z@ \@plus2\p@ \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@ \belowdisplayskip \abovedisplayskip} \newcommand\footnotesize{% \@setfontsize\footnotesize\@viiipt{10} \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@ \abovedisplayshortskip \z@ \@plus\p@ \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@ \def\@listi{\leftmargin\leftmargini \topsep 3\p@ \@plus\p@ \@minus\p@ \parsep \z@ \itemsep \parsep}% \belowdisplayskip \abovedisplayskip} \newcommand\scriptsize{\@setfontsize\scriptsize\@viipt{8}} \newcommand\tiny{\@setfontsize\tiny\@vpt{6}} \newcommand\large{\@setfontsize\large\@xiipt{14}} \newcommand\Large{\@setfontsize\Large\@xivpt{18}} \newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}} \newcommand\huge{\@setfontsize\huge\@xxpt{25}} \newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}} \def\@listI{\leftmargin\leftmargini \parsep 4\p@ \@plus2\p@ \@minus\p@ \topsep 8\p@ \@plus2\p@ \@minus4\p@ \itemsep4\p@ \@plus2\p@ \@minus\p@} \let\@listi\@listI \@listi \def\@listii {\leftmargin\leftmarginii \labelwidth\leftmarginii \advance\labelwidth-\labelsep \topsep 4\p@ \@plus2\p@ \@minus\p@ \parsep 2\p@ \@plus\p@ \@minus\p@ \itemsep \parsep} \def\@listiii{\leftmargin\leftmarginiii \labelwidth\leftmarginiii \advance\labelwidth-\labelsep \topsep 2\p@ \@plus\p@\@minus\p@ \parsep \z@ \partopsep \p@ \@plus\z@ \@minus\p@ \itemsep \topsep} \def\@listiv {\leftmargin\leftmarginiv \labelwidth\leftmarginiv \advance\labelwidth-\labelsep} \def\@listv {\leftmargin\leftmarginv \labelwidth\leftmarginv \advance\labelwidth-\labelsep} \def\@listvi {\leftmargin\leftmarginvi \labelwidth\leftmarginvi \advance\labelwidth-\labelsep} }{} \ifthenelse{\@ptsize = 1}{ \typeout{Eleven Point} \renewcommand\normalsize{% \@setfontsize\normalsize\@xipt{13.6}% \abovedisplayskip 19\p@ \@plus3\p@ \@minus6\p@ \abovedisplayshortskip \abovedisplayskip \belowdisplayshortskip \abovedisplayskip \belowdisplayskip \abovedisplayskip \let\@listi\@listI} \normalsize \newcommand\small{% \@setfontsize\small\@xpt\@xiipt \abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@ \abovedisplayshortskip \z@ \@plus3\p@ \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@ \def\@listi{\leftmargin\leftmargini \topsep 6\p@ \@plus2\p@ \@minus2\p@ \parsep 3\p@ \@plus2\p@ \@minus\p@ \itemsep \parsep}% \belowdisplayskip \abovedisplayskip } \newcommand\footnotesize{% \@setfontsize\footnotesize\@ixpt{11}% \abovedisplayskip 8\p@ \@plus2\p@ \@minus4\p@ \abovedisplayshortskip \z@ \@plus\p@ \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@ \def\@listi{\leftmargin\leftmargini \topsep 4\p@ \@plus2\p@ \@minus2\p@ \parsep \z@ \itemsep \parsep}% \belowdisplayskip \abovedisplayskip } \newcommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}} \newcommand\tiny{\@setfontsize\tiny\@vipt\@viipt} \newcommand\large{\@setfontsize\large\@xiipt{14}} \newcommand\Large{\@setfontsize\Large\@xivpt{18}} \newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}} \newcommand\huge{\@setfontsize\huge\@xxpt{25}} \newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}} \def\@listI{\leftmargin\leftmargini \parsep 4.5\p@ \@plus2\p@ \@minus\p@ \topsep 9\p@ \@plus3\p@ \@minus5\p@ \itemsep4.5\p@ \@plus2\p@ \@minus\p@} \let\@listi\@listI \@listi \def\@listii {\leftmargin\leftmarginii \labelwidth\leftmarginii \advance\labelwidth-\labelsep \topsep 4.5\p@ \@plus2\p@ \@minus\p@ \parsep 2\p@ \@plus\p@ \@minus\p@ \itemsep \parsep} \def\@listiii{\leftmargin\leftmarginiii \labelwidth\leftmarginiii \advance\labelwidth-\labelsep \topsep 2\p@ \@plus\p@\@minus\p@ \parsep \z@ \partopsep \p@ \@plus\z@ \@minus\p@ \itemsep \topsep} \def\@listiv {\leftmargin\leftmarginiv \labelwidth\leftmarginiv \advance\labelwidth-\labelsep} \def\@listv {\leftmargin\leftmarginv \labelwidth\leftmarginv \advance\labelwidth-\labelsep} \def\@listvi {\leftmargin\leftmarginvi \labelwidth\leftmarginvi \advance\labelwidth-\labelsep} }{} \ifthenelse{\@ptsize = 2}{ \typeout{Twelve Point} \renewcommand\normalsize{% \@setfontsize\normalsize\@xiipt{14.5}% \abovedisplayskip 20\p@ \@plus3\p@ \@minus7\p@ \abovedisplayshortskip \abovedisplayskip \belowdisplayshortskip \abovedisplayskip \belowdisplayskip \abovedisplayskip \let\@listi\@listI} \normalsize \newcommand\small{% \@setfontsize\small\@xipt{13.6}% \abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@ \abovedisplayshortskip \z@ \@plus3\p@ \belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@ \def\@listi{\leftmargin\leftmargini \topsep 9\p@ \@plus3\p@ \@minus5\p@ \parsep 4.5\p@ \@plus2\p@ \@minus\p@ \itemsep \parsep}% \belowdisplayskip \abovedisplayskip } \newcommand\footnotesize{% \@setfontsize\footnotesize\@xpt\@xiipt \abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@ \abovedisplayshortskip \z@ \@plus3\p@ \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@ \def\@listi{\leftmargin\leftmargini \topsep 6\p@ \@plus2\p@ \@minus2\p@ \parsep 3\p@ \@plus2\p@ \@minus\p@ \itemsep \parsep}% \belowdisplayskip \abovedisplayskip } \newcommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}} \newcommand\tiny{\@setfontsize\tiny\@vipt\@viipt} \newcommand\large{\@setfontsize\large\@xivpt{18}} \newcommand\Large{\@setfontsize\Large\@xviipt{22}} \newcommand\LARGE{\@setfontsize\LARGE\@xxpt{25}} \newcommand\huge{\@setfontsize\huge\@xxvpt{30}} \let\Huge=\huge \def\@listI{\leftmargin\leftmargini \parsep 5\p@ \@plus2.5\p@ \@minus\p@ \topsep 10\p@ \@plus4\p@ \@minus6\p@ \itemsep5\p@ \@plus2.5\p@ \@minus\p@} \let\@listi\@listI \@listi \def\@listii {\leftmargin\leftmarginii \labelwidth\leftmarginii \advance\labelwidth-\labelsep \topsep 5\p@ \@plus2.5\p@ \@minus\p@ \parsep 2.5\p@ \@plus\p@ \@minus\p@ \itemsep \parsep} \def\@listiii{\leftmargin\leftmarginiii \labelwidth\leftmarginiii \advance\labelwidth-\labelsep \topsep 2.5\p@\@plus\p@\@minus\p@ \parsep \z@ \partopsep \p@ \@plus\z@ \@minus\p@ \itemsep \topsep} \def\@listiv {\leftmargin\leftmarginiv \labelwidth\leftmarginiv \advance\labelwidth-\labelsep} \def\@listv {\leftmargin\leftmarginv \labelwidth\leftmarginv \advance\labelwidth-\labelsep} \def\@listvi {\leftmargin\leftmarginvi \labelwidth\leftmarginvi \advance\labelwidth-\labelsep} }{} % These are specific fonts used in the file. \DeclareFixedFont{\ninsfb}{OT1}{phv}{b}{n}{9} \DeclareFixedFont{\ninsf}{OT1}{phv}{m}{n}{9} \DeclareFixedFont{\egtsf}{OT1}{phv}{m}{n}{8} \DeclareFixedFont{\egtsfb}{OT1}{phv}{b}{n}{8} \DeclareFixedFont{\sevsf}{OT1}{phv}{m}{n}{7} \DeclareFixedFont{\bannerfnt}{OT1}{phv}{b}{n}{10} \DeclareFixedFont{\pnumfnt}{OT1}{phv}{b}{n}{18} \DeclareFixedFont{\twlsfb}{OT1}{phv}{b}{n}{12} \DeclareFixedFont{\tensfb}{OT1}{phv}{b}{n}{10} \DeclareFixedFont{\tensf}{OT1}{phv}{m}{n}{10} \DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm} \DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf} \DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt} \DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf} \DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit} \DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl} \DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc} \DeclareRobustCommand*\cal{\@fontswitch{\relax}{\mathcal}} \DeclareRobustCommand*\mit{\@fontswitch{\relax}{\mathnormal}} \DeclareFontFamily{OT1}{msbm}{} \DeclareFontShape{OT1}{msbm}{m}{n}{<5> <6> <7> <8> <9> <10> gen * msbm }{} \newcommand\bb{\fontfamily{msbm}\selectfont} \newcommand\bi{\fontseries{bc}\fontshape{it}\selectfont} % ----------------------------------------------------------- % Page Layout % ----------------------------------------------------------- \setlength{\paperheight}{11in} \setlength{\paperwidth}{8.5in} \setlength{\oddsidemargin}{48pt} \setlength{\evensidemargin}{48pt} \setlength{\topmargin}{1.5in} \setlength{\marginparwidth}{0pt} \setlength{\marginparsep}{11pt} \setlength{\marginparpush}{5pt} \setlength{\columnsep}{.375in} \setlength{\columnseprule}{0pt} \setlength{\headheight}{10pt} \setlength{\headsep}{18pt} \setlength{\topskip}{10pt} \setlength{\footskip}{24pt} \setlength{\textheight}{9.00in} \advance\textheight by -\headheight \advance\textheight by -\headsep \setlength{\textwidth}{7.5in} \setlength{\footnotesep}{6.65pt} \setlength{\skip\footins}{9pt plus4pt minus 2pt} \setlength{\floatsep}{18pt plus2pt minus2pt} \setlength{\textfloatsep}{20pt plus4pt minus2pt} \setlength{\intextsep}{24pt plus4pt minus2pt} \setlength{\dblfloatsep}{12pt plus2pt minus2pt} \setlength{\dbltextfloatsep}{20pt plus2pt minus4pt} \setlength{\@fptop}{0pt plus 1fil} \setlength{\@fpsep}{8pt plus 2fil} \setlength{\@fpbot}{0pt plus 1fil} \setlength{\@dblfptop}{0pt plus 1fil} \setlength{\@dblfpsep}{8pt plus 2fil} \setlength{\@dblfpbot}{0pt plus 1fil} \setlength{\parskip}{0pt plus 1pt} \setlength{\parindent}{.25in} \setlength{\partopsep}{2pt plus 1pt minus 1pt} \@lowpenalty 51 \@medpenalty 151 \@highpenalty 301 \@beginparpenalty -\@lowpenalty \@endparpenalty -\@lowpenalty \@itempenalty -\@lowpenalty \setlength{\leftmargini}{.25in} \setlength{\leftmarginii}{22pt} \setlength{\leftmarginiii}{18.7pt} \setlength{\leftmarginiv}{17pt} \setlength{\leftmarginv}{10pt} \setlength{\leftmarginvi}{10pt} % ------------------------------------------------------------------------- % Sections and Enumerate % ------------------------------------------------------------------------- % Changes the enumerate environments \setlength{\leftmargin}{\leftmargini} \setlength{\labelsep}{5pt} \setlength{\labelwidth}{\leftmargini} \addtolength{\labelwidth}{-\labelsep} \renewcommand{\@listI}{\leftmargin\leftmargini\parsep\z@ \topsep 6\p@ plus2\p@ minus1\p@\itemsep\z@} \let\@listi\@listI \@listi \renewcommand{\@listii}{\setlength{\leftmargin}{\leftmarginii} \setlength{\labelwidth}{\leftmarginii} \addtolength{\labelwidth}{-\labelsep} \setlength{\topsep}{4\p@ plus2\p@ minus\p@} \setlength{\parsep}{\z@} \setlength{\itemsep}{\parsep}} \renewcommand{\@listiii}{\setlength{\leftmargin}{\leftmarginiii} \setlength{\labelwidth}{\leftmarginiii} \addtolength{\labelwidth}{-\labelsep} \setlength{\topsep}{2\p@ plus\p@ minus\p@} \setlength{\parsep}{\z@} \setlength{\partopsep}{\p@ plus\z@ minus\p@} \setlength{\itemsep}{\parsep}} \renewcommand{\@listiv}{\setlength{\leftmargin}{\leftmarginiv} \setlength{\labelwidth}{\leftmarginiv} \addtolength{\labelwidth}{-\labelsep}} \renewcommand{\@listv}{\setlength{\leftmargin}{\leftmarginv} \setlength{\labelwidth}{\leftmarginv} \addtolength{\labelwidth}{-\labelsep}} \renewcommand{\@listvi}{\setlength{\leftmargin}{\leftmarginvi} \setlength{\labelwidth}{\leftmarginvi} \addtolength{\labelwidth}{-\labelsep}} \renewcommand\theenumi{\@arabic\c@enumi} \renewcommand\theenumii{\@alph\c@enumii} \renewcommand\theenumiii{\@roman\c@enumiii} \renewcommand\theenumiv{\@Alph\c@enumiv} \newcommand\labelenumi{\theenumi.} \newcommand\labelenumii{(\theenumii)} \newcommand\labelenumiii{\theenumiii.} \newcommand\labelenumiv{\theenumiv.} \newenvironment{verse} {\let\\=\@centercr \list{}{\itemsep \z@ \itemindent -1.5em% \listparindent\itemindent \rightmargin \leftmargin \advance\leftmargin 1.5em}% \item[]} {\endlist} \newenvironment{quotation} {\list{}{\listparindent 1.5em% \itemindent \listparindent \rightmargin \leftmargin \parsep \z@ \@plus\p@}% \item[]} {\endlist} \newenvironment{quote} {\list{}{\rightmargin\leftmargin}% \item[]} {\endlist} \newenvironment{sequence}{ % Special enumerate environments for asme \renewcommand{\theenumi}{\alph{enumi}} \renewcommand{\labelenumi}{(\theenumi)} \begin{enumerate}} {\end{enumerate}} \newenvironment{enumeroman}{ \renewcommand{\theenumi}{\roman{enumi}} \renewcommand{\labelenumi}{(\theenumi)} \begin{enumerate}} {\end{enumerate}} \newenvironment{description} {\list{}{\labelwidth\z@ \itemindent-\leftmargin \let\makelabel\descriptionlabel}} {\endlist} \newcommand*\descriptionlabel[1]{\hspace\labelsep \normalfont\bfseries #1} \renewcommand\theequation{\@arabic\c@equation} % equation environment \setlength\arraycolsep{1.5pt} %Different from article class \setlength\tabcolsep{6pt} \setlength\arrayrulewidth{.4\p@} \setlength\doublerulesep{2\p@} \setlength\tabbingsep{\labelsep} \renewcommand{\footnoterule}{ % This modifies the default footnote style \kern12\p@ \hrule width.5in height.25pt \kern10\p@} \long\def\@makefntext#1{\parindent 1em\noindent \hbox to1.8em{\hss$\m@th^{\@thefnmark}$}#1} \def\@fnsymbol#1{\ifcase#1\or *\or \dagger\or \ddagger\or \Section\or \Paragraph\or \|\or **\or \dagger\dagger \or \ddagger\ddagger \else\@ctrerr\fi\relax} % Title page definition \newenvironment{titlepage} {% \if@twocolumn \@restonecoltrue\onecolumn \else \@restonecolfalse\newpage \fi \thispagestyle{empty}% \if@compatibility \setcounter{page}{0} \else \setcounter{page}{1}% \fi}% {\if@restonecol\twocolumn \else \newpage \fi \setcounter{page}{1}% } % Section Definitions \setcounter{secnumdepth}{3} \newcounter {part} \newcounter {section} \newcounter {subsection}[section] \newcounter {subsubsection}[subsection] \newcounter {paragraph}[subsubsection] \newcounter {subparagraph}[paragraph] \renewcommand\thepart {\@Roman\c@part} \renewcommand\thesection {\@arabic\c@section} \renewcommand\thesubsection {\thesection.\@arabic\c@subsection} \renewcommand\thesubsubsection{\thesubsection .\@arabic\c@subsubsection} \renewcommand\theparagraph {\thesubsubsection.\@arabic\c@paragraph} \renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph} \newcommand\part{\par \addvspace{4ex}% \@afterindentfalse \secdef\@part\@spart} \def\@part[#1]#2{% \ifnum \c@secnumdepth >\m@ne \refstepcounter{part}% \addcontentsline{toc}{part}{\thepart\hspace{1em}#1}% \else \addcontentsline{toc}{part}{#1}% \fi {\parindent \z@ \raggedright \interlinepenalty \@M \normalfont \ifnum \c@secnumdepth >\m@ne \Large\bfseries \partname~\thepart \par\nobreak \fi \huge \bfseries #2% \markboth{}{}\par}% \nobreak \vskip 3ex \@afterheading} \def\@spart#1{% {\parindent \z@ \raggedright \interlinepenalty \@M \normalfont \huge \bfseries #1\par}% \nobreak \vskip 3ex \@afterheading} \def\@endpart{\vfil\newpage \if@twoside \hbox{}% \thispagestyle{empty}% \newpage \fi \if@tempswa \twocolumn \fi} % This changes the section headings style \newcommand{\section}{\@startsection {section}{1}{\z@} {24pt plus3pt minus2pt} {0.0001pt} {\tensfb}} \newcommand{\subsection}{\@startsection {subsection}{2}{\z@} {18pt plus2pt minus1pt} {0.0001pt} {\tensfb}} \newcommand{\subsubsection}{\@startsection {subsubsection}{3}{\parindent} {18pt plus2pt minus1pt} {-1em} {\tensfb}} \newcommand{\paragraph}{\@startsection {paragraph}{4}{\z@} {12pt plus2pt minus1pt} {-1em} {\normalfont\normalsize\bfseries}} \newcommand{\subparagraph}{\@startsection {subparagraph}{4}{\parindent} {12pt plus2pt minus1pt} {-1em} {\normalfont\normalsize\bfseries}} % ----------------------------------------------------------------------- % Table of Contents % ----------------------------------------------------------------------- \newcommand\@pnumwidth{1.55em} \newcommand\@tocrmarg{2.55em} \newcommand\@dotsep{4.5} \setcounter{tocdepth}{3} \newcommand\tableofcontents{% \section*{\contentsname \@mkboth{% \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}% \@starttoc{toc}% } \newcommand*\l@part[2]{% \ifnum \c@tocdepth >-2\relax \addpenalty\@secpenalty \addvspace{2.25em \@plus\p@}% \begingroup \setlength\@tempdima{3em}% \parindent \z@ \rightskip \@pnumwidth \parfillskip -\@pnumwidth {\leavevmode \large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par \nobreak \if@compatibility \global\@nobreaktrue \everypar{\global\@nobreakfalse\everypar{}} \fi \endgroup \fi} \newcommand*\l@section[2]{% \ifnum \c@tocdepth >\z@ \addpenalty\@secpenalty \addvspace{1.0em \@plus\p@}% \setlength\@tempdima{1.5em}% \begingroup \parindent \z@ \rightskip \@pnumwidth \parfillskip -\@pnumwidth \leavevmode \bfseries \advance\leftskip\@tempdima \hskip -\leftskip #1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par \endgroup \fi} \newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}} \newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}} \newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}} \newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}} \newcommand\listoffigures{% \section*{{List of Figures} \@mkboth{\MakeUppercase{List of Figures}} {\MakeUppercase{List of Figures}}} \@starttoc{lof}% } \newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}} \newcommand\listoftables{% \section*{{List of Tables} \@mkboth{% \MakeUppercase{List of Tables}} {\MakeUppercase{List of Tables}}} \@starttoc{lot}% } \let\l@table\l@figure % ------------------------------------------------------------------------ % Tables and Figures % ------------------------------------------------------------------------ \setcounter{topnumber}{4} % These change the float placement \renewcommand{\topfraction}{.9} \setcounter{bottomnumber}{4} \renewcommand{\bottomfraction}{.9} \setcounter{totalnumber}{4} \renewcommand{\textfraction}{.1} \renewcommand{\floatpagefraction}{.901} \setcounter{dbltopnumber}{4} \renewcommand{\dbltopfraction}{.9} \renewcommand{\dblfloatpagefraction}{.91} \newcommand\figurename{Figure} \newcommand\tablename{Table} \newcommand\partname{Part} \newcommand\appendixname{APPENDIX} \newcommand\refname{REFERENCES} \newcommand\contentsname{CONTENTS} \long\def\@makecaption#1#2{ % This remains the same from asme.sty \par\addvspace{6pt}{\tensf \setbox\@tempboxa\hbox{\egtsf#1.\quad#2}% \ifdim \wd\@tempboxa >\hsize {\egtsf#1.\quad\ignorespaces#2}\par \else \hbox to\hsize{\hfil\box\@tempboxa\hfil}% \fi}} % \vskip4pt\global\c@subfigure0} % Take out subfigure usepackage subfigure to achieve same result %\newcounter{subfigure} %\long\def\subcaption#1{% %\global\advance\c@subfigure1 % \setbox\@tempboxa\hbox{{\egtsfb (\alph{subfigure})\hskip.5em#1}}% % \ifdim \wd\@tempboxa >\hsize % {{\sffamily\fonsize{8}{\baselineskip} % (\alph{subfigure})\hskip.5em\ignorespaces#1\par}} % \else\hbox to\hsize{\hfil\box\@tempboxa\hfil}\fi\par\addvspace{6pt}} \newbox\tempbox \newcommand{\figurebox}[2]{% \dimen99=#2 \divide\dimen99 by2 \centerline{\vbox{\hrule\hbox to #1{\vrule\hfill\vbox to #2{\hbox to #1{\hfill{\vrule height\dimen99 width0pt{\hfill}}\hfill}\vfill} \vrule}\hrule}}} \newcounter{figure} \renewcommand\thefigure{\@arabic\c@figure} \def\fps@figure{tbp} \def\ftype@figure{1} \def\ext@figure{lof} \def\fnum@figure{\figurename~\thefigure} \newenvironment{figure} {\@float{figure}} {\end@float} \newenvironment{figure*} {\@dblfloat{figure}} {\end@dblfloat} \newcounter{table} \renewcommand\thetable{\@arabic\c@table} \def\fps@table{tbp} \def\ftype@table{2} \def\ext@table{lot} \def\fnum@table{\tablename~\thetable} \newenvironment{table}{% \small \renewcommand{\arraystretch}{1.5} \@float{table}} {\end@float} \newenvironment{table*}{% \small \renewcommand{\arraystretch}{1.5} \@dblfloat{table}} {\end@dblfloat} \newcommand\x{@{\extracolsep{\hfill}}} % Command to control column space in % table environment. % -------------------------------------------------------------------------- % Title Page % -------------------------------------------------------------------------- \newcommand\@confshortname{} \newcommand\@conffullname{} \newcommand\@confdate{} \newcommand\@confmonth{} \newcommand\@confyear{} \newcommand\@confcity{} \newcommand\@confcountry{} \newcommand\@papernum{} \newcommand{\confshortname}[1]{\gdef\@confshortname{#1}} \newcommand{\conffullname}[1]{\gdef\@conffullname{#1}} \newcommand{\confdate}[1]{\gdef\@confdate{#1}} \newcommand{\confmonth}[1]{\gdef\@confmonth{#1}} \newcommand{\confyear}[1]{\gdef\@confyear{#1}} \newcommand{\confcountry}[1]{\gdef\@confcountry{#1}} \newcommand{\confcity}[1]{\gdef\@confcity{#1}} \newcommand{\papernum}[1]{\gdef\@papernum{#1}} \if@titlepage \newcommand{\maketitle}{\begin{titlepage}% \let\footnotesize\small \let\footnoterule\relax \null\vfil \vskip 60\p@ \begin{center}% {\LARGE \@title \par}% \vskip 3em% {\large \lineskip .75em% \begin{tabular}[t]{c}% \@author \end{tabular}\par}% \vskip 1.5em% {\large \@date \par}% % Set date in \large size. \end{center}\par \@thanks \vfil\null \end{titlepage}% \setcounter{footnote}{0}% \let\thanks\relax\let\maketitle\relax \gdef\@thanks{}\gdef\@author{}\gdef\@title{}} \else \newcommand{\maketitle}{\par \begingroup \renewcommand{\thefootnote}{\fnsymbol{footnote}}% \def\@makefnmark{\hbox to\z@{$\m@th^{\@thefnmark}$\hss}}% \long\def\@makefntext##1{\parindent 1em\noindent \hbox to1.8em{\hss$\m@th^{\@thefnmark}$}##1}% \if@twocolumn \ifnum \col@number=\@ne \@maketitle \else \twocolumn[\@maketitle]% \fi \else \newpage \global\@topnum\z@ % Prevents figures from going at top of page. \@maketitle \fi \thispagestyle{plain}\@thanks \endgroup \setcounter{footnote}{0}% \let\thanks\relax \let\maketitle\relax\let\@maketitle\relax \gdef\@thanks{}\gdef\@author{}\gdef\@title{}} \fi \renewcommand\title[1]{\gdef\@title{\uppercase{#1}}} \if@cleanhead \def\@maketitle{% \newpage \null\vspace*{-26pt} \vbox{\hbox to \textwidth{\begin{tabular}{@{}c@{\hskip3pc}} \hbox to 46pt{\vbox to 46pt{\vss\hsize46pt\vss}}\end{tabular}\hss \vbox{\hsize37pc\scriptsize\sf\vskip\baselineskip% \vskip.5in} \hskip1pc}} \vskip.25in \vskip .25pc{\large\twlsfb \begin{center}\leftskip.5in plus1fill\rightskip\leftskip \@title\par\end{center}} \vskip2pc{\begin{center}\@author\par\end{center}}\vskip12pt} \else \def\@maketitle{% \newpage \null\vspace*{-26pt} % Took out ASMElogo provision \vbox{\hbox to \textwidth{\begin{tabular}{@{}c@{\hskip3pc}} \hbox to 46pt{\vbox to 46pt{\vss\hsize46pt\vss}}\end{tabular}\hss \vbox{\hsize37pc\scriptsize\sf\vskip\baselineskip% \bannerfnt \hfill Proceedings of \@confshortname\par \hfill \@confyear\ \@conffullname\par \hfill \@confcity, \@confcountry, \@confmonth\ \@confdate, \@confyear \vskip.5in \hfill {\pnumfnt\@papernum}} \hskip1pc}} \vskip.25in \vskip .25pc{\large\twlsfb \begin{center}\leftskip.5in plus1fill\rightskip\leftskip \@title\par\end{center}} \vskip2pc{\begin{center}\@author\par\end{center}}\vskip12pt} \fi \if@titlepage \newenvironment{abstract}{% \titlepage \null\vfil \begin{center} {\tensfb ABSTRACT} \@endparpenalty\@M \end{center}} {\par\vfil\null\endtitlepage} \else \newenvironment{abstract}{% \if@twocolumn \normalsize\par\addvspace{12pt}\noindent {\tensfb ABSTRACT}\par \else \begin{center} {{\tensfb ABSTRACT}\vspace{-.5em}\vspace{\z@}} \end{center} \quotation \fi} {\if@twocolumn\else\endquotation\fi} \fi % Get the multiple author set \newcount\@authcnt \newcount\@tmpcnt\@tmpcnt\z@ \def\@author{% \ifnum\@authcnt>7 \ifnum\@tmpcnt<\@authcnt \global\advance\@tmpcnt1 \leavevmode\hbox{\hss\csname @auth\romannumeral\the\@tmpcnt\endcsname\hss}% \quad \let\next\@author \else \let\next\relax \fi \else \ifnum\@tmpcnt<\@authcnt \global\advance\@tmpcnt1 \ifnum\@tmpcnt=\@authcnt \expandafter\expandafter\expandafter\au@car\csname @auseq\romannumeral\the% \@authcnt\endcsname\@nil \leavevmode\hbox to \@au@car{\hss\csname @auth\romannumeral\the\@tmpcnt% \endcsname\hss} \else \expandafter\expandafter\expandafter\au@car\csname @auseq\romannumeral% \the\@authcnt\endcsname\@nil \leavevmode\hbox to \@au@car{\hss\csname @auth\romannumeral\the\@tmpcnt% \endcsname\hss} \fi \let\next\@author \else \let\next\relax \fi \fi \next} \newcommand{\affiliation}[1]{\\ \tensf #1} \def\@auseqi{{7.4in}} \def\@auseqii{{3.45in}{3.45in}} \def\@auseqiii{{2.4in}{2.4in}{2.4in}} \def\@auseqiv{{3.45in}{3.45in}{3.45in}{3.45in}} \def\@auseqv{{2.4in}{2.4in}{2.4in}{3.45in}{3.45in}} \def\@auseqvi{{2.4in}{2.4in}{2.4in}{2.4in}{2.4in}{2.4in}} \def\@auseqvii{{3.45in}{3.45in}{2.4in}{2.4in}{2.4in}{3.45in}{3.45in}} \def\au@car#1#2\@nil{\gdef\@au@car{#1}} \def\au@cdr#1#2\@nil{\expandafter\gdef\csname @auseq\romannumeral\the\@authcnt% \endcsname{#2}} \renewcommand{\author}[1]{% \global\advance\@authcnt1 \expandafter\gdef\csname @auth\romannumeral\the\@authcnt\endcsname {\normalsize\sf\begin{tabular}[t]{@{}c@{}}\tensfb#1\\[20pt] \end{tabular}}} % --------------------------------------------------------------------------- % Bibliography % --------------------------------------------------------------------------- \newcommand\appendix{\par \setcounter{section}{0}% \setcounter{subsection}{0}% \renewcommand\thesection{\@Alph\c@section}} \newcommand\newblock{} \newif\if@openbib \@openbibfalse % This generates the format for the bibliography enties. It is taken from % the article class. \newdimen\bibindent \bibindent=1.5em \newenvironment{thebibliography}[1] {\section*{\refname \@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}}% \list{\@biblabel{\@arabic\c@enumiv}}% {\settowidth\labelwidth{\@biblabel{#1}}% \leftmargin\labelwidth \advance\leftmargin\labelsep \if@openbib \advance\leftmargin\bibindent \itemindent -\bibindent \listparindent \itemindent \parsep \z@ \fi \usecounter{enumiv}% \let\p@enumiv\@empty \renewcommand\theenumiv{\@arabic\c@enumiv}}% \if@openbib \renewcommand\newblock{\par}% \else \renewcommand\newblock{\hskip .11em \@plus.33em \@minus.07em}% \fi \sloppy\clubpenalty4000\widowpenalty4000% \sfcode`\.=\@m} {\def\@noitemerr {\@latex@warning{Empty `thebibliography' environment}}% \endlist} % This code was borrowed from the cite.sty package. %--------------------------------------------------------------------------- % C I T E . S T Y % % version 3.8 (Apr 1999) % % Compressed, sorted lists of numerical citations: [11-16] % see also OVERCITE.STY and DRFTCITE.STY % % Copyright (C) 1989-1999 by Donald Arseneau % These macros may be freely transmitted, reproduced, or modified % provided that this notice is left intact. % % Instructions follow \endinput. % ------------------------------------ % First, ensure that some catcodes have the expected values \edef\citenum{% to restore funny codes \catcode\string`\string ` \the\catcode\string`\` \catcode\string`\string ' \the\catcode\string`\' \catcode\string`\string = \the\catcode\string`\= \catcode\string`\string _ \the\catcode\string`\_ \catcode\string`\string : \the\catcode\string`\:} \catcode\string`\`12 \catcode`\'12 \catcode`\=12 \catcode`\_8 \catcode`\:12 % Handle optional variations: [verbose,nospace,space,nosort,noadjust], % \citeform,\citeleft,\citeright,\citemid,\citepunct,\citedash % % Set defaults: % [ on the left. \@ifundefined{citeleft}{\let\citeleft=[}{} % ] on the right: \@ifundefined{citeright}{\let\citeright=]}{} % , (comma space) before note \@ifundefined{citemid}{\def\citemid{,\penalty\@medpenalty\ }}{} % , (comma thin-space) between entries; [nospace] eliminates the space \@ifundefined{citepunct}{ \def\citepunct{,\penalty\@m\hskip.13emplus.1emminus.1em}% }{} % -- (endash) designating range of numbers: % (using \hbox avoids easy \exhyphenpenalty breaks) \@ifundefined{citedash}{\def\citedash{\hbox{--}\penalty\@m }}{} % Each number left as-is: \@ifundefined{citeform}{\def\citeform{}}{} % Do not repeat warnings. [verbose] reverses \let\oc@verbo\relax %---------------------- % \citen uses \@nocite to ignore spaces after commas, and write the aux file % \citation. \citen then loops over the citation tags, using \@make@cite@list % to make a sorted list of numbers. Finally, \citen executes \@citelist to % compress ranges of numbers and print the list. \citen can be used by itself % to give citation numbers without the brackets and other formatting; e.g., % "See also ref.~\citen{junk}." % \edef\citen{\noexpand\protect \expandafter\noexpand\csname citen \endcsname} \@namedef{citen }#1{% \begingroup \let\@safe@activesfalse\@empty \@nocite{#1}% ignores spaces, writes to .aux file, returns #1 in \@no@sparg \@tempcntb\m@ne % \@tempcntb tracks highest number \let\@h@ld\relax % nothing held from list yet \let\@citea\@empty % no punctuation preceding first \let\@celt\delimiter % an unexpandable, but identifiable, token \def\@cite@list{}% % empty list to start \@for \@citeb:=\@no@sparg\do{\@make@cite@list}% make a sorted list of numbers % After sorted citelist is made, execute it to compress citation ranges. \@tempcnta\m@ne % no previous number \let\@celt\@compress@cite \@cite@list % output number list with compression \@h@ld % output anything held over \endgroup} % For each citation, check if it is defined and if it is a number. % if a number: insert it in the sorted \@cite@list % otherwise: output it immediately. % \def\@make@cite@list{% \expandafter\let \expandafter\@B@citeB \csname b@\@citeb\@extra@b@citeb \endcsname \ifx\@B@citeB\relax % undefined: output ? and warning \@citea {\bf{?}}\let\@citea\citepunct \G@refundefinedtrue \@warning {Citation `\@citeb' on page \thepage\space undefined}% \oc@verbo \global\@namedef{b@\@citeb\@extra@b@citeb}{?}% \else % defined % remove previous line to repeat warnings \ifcat _\ifnum\z@<0\@B@citeB _\else A\fi % a positive number, put in list \@addto@cite@list \else % citation is not a number, output immediately \@citea \citeform{\@B@citeB}% \let\@citea\citepunct \fi\fi} % Regular definition for adding entry to cite list, with sorting \@ifundefined{@addto@cite@list}{% sort option either declared or defaulted \def\@addto@cite@list{\@tempcnta\@B@citeB \relax \ifnum \@tempcnta>\@tempcntb % new highest, add to end (efficiently) \edef\@cite@list{\@cite@list \@celt{\@B@citeB}}% \@tempcntb\@tempcnta \else % arbitrary number: insert appropriately \edef\@cite@list{\expandafter\@sort@celt \@cite@list \@gobble @}% \fi} % % \@sort@celt inserts number (\@tempcnta) into list of \@celt{num} (#1{#2}) % \@celt must not be expandable; list should end with two vanishing tokens. % \def\@sort@celt#1#2{\ifx \@celt #1% parameters are \@celt {num} \ifnum #2<\@tempcnta % number goes later in list \@celt{#2}% \expandafter\expandafter\expandafter\@sort@celt % continue \else % number goes here \@celt{\number\@tempcnta}\@celt{#2}% stop comparing \fi\fi} }% end sort option definitions {}% nosort definition is done in options processing % Check if each number follows previous and can be put in a range % \def\@compress@cite#1{% % This is executed for each number \advance\@tempcnta\@ne % Now \@tempcnta is one more than the previous number \ifnum #1=\@tempcnta % Number follows previous--hold on to it \ifx\@h@ld\relax % first pair of successives \edef\@h@ld{\@citea \noexpand\citeform{#1}}% \else % compressible list of successives \def\@h@ld{\citedash \citeform{#1}}% \fi \else % non-successor -- dump what's held and do this one \@h@ld \@citea \citeform{#1}\let\@h@ld\relax \fi \@tempcnta#1\let\@citea\citepunct } \edef\cite{\noexpand\protect\expandafter\noexpand\csname cite \endcsname} \@namedef{cite }{\@ifnextchar [{\@tempswatrue\@citex}{\@tempswafalse\@citex[]}} % Make \@citex refer to \citen: % \def\@citex[#1]#2{\@cite{\citen{#2}}{#1}}% % Replacement for \@cite which defines the formatting normally done % around the citation list. Minor changes can % be done by changing \citeleft, \citemid, and \citeright; but in other % cases it might be necessary to redefine the whole macro. % \def\@cite#1#2{\leavevmode \cite@adjust \citeleft{#1\if@tempswa \citemid #2\fi \spacefactor\@m % punctuation in note doesn't affect outside }\citeright} % Put a penalty before the citation, and adjust the spacing: if no space % already or if there is extra space due to some punctuation, then change % to one inter-word space. % \@ifundefined{cite@adjust}{\def\cite@adjust{% \@tempskipa\lastskip \edef\@tempa{\the\@tempskipa}\unskip \ifnum\lastpenalty=\z@ \penalty\@highpenalty \fi \ifx\@tempa\@zero@skip \spacefactor1001 \fi % if no space before, set flag \ifnum\spacefactor>\@m \ \else \hskip\@tempskipa \fi}}{} \edef\@zero@skip{\the\z@skip} % \nocite: This is changed to ignore *ALL* spaces and be robust. The % parameter list, with spaces removed, is `returned' in \@no@sparg, which % is used by \citen. % \edef\nocite{\noexpand\protect\expandafter\noexpand\csname nocite \endcsname} \@namedef{nocite }#1{\@bsphack \@nocite{#1}% \@for \@citeb:=\@no@sparg\do{\@ifundefined{b@\@citeb\@extra@b@citeb}% {\G@refundefinedtrue\@warning{Citation `\@citeb' undefined}% \oc@verbo \global\@namedef{b@\@citeb\@extra@b@citeb}{?}}{}}% \@esphack} \def\@nocite#1{\xdef\@no@sparg{\@ignsp#1 \! }% remove *ALL* spaces \if@filesw \immediate\write\@auxout {\string\citation {\@no@sparg}}\fi} % for ignoring *ALL* spaces in the input. This presumes there are no % \outer tokens and no \if-\fi constructs in the parameter. Spaces inside % braces are retained. % \def\@ignsp#1 {\ifx\!#1\@empty\else #1\expandafter\@ignsp\fi} \let\nocitecount\relax % in case \nocitecount was used for drftcite \@ifundefined{@extra@b@citeb}{\def\@extra@b@citeb{}}{} % in case no fancy bib package (chapterbib) defines this \@ifundefined{G@refundefinedtrue}{\let\G@refundefinedtrue\relax}{} \citenum % execute restore-catcodes % Aliases: \let\citenum\citen \let\citeonline\citen % End of Cite.sty code. %------------------------------------------------------------------------- % --------------------------------------------------------------------------- % Special ASME declarations % -------------------------------------------------------------------------- % Nomenclature environment \newbox\tempbox \newenvironment{nomenclature}{% \newcommand\entry[2]{% \setbox\tempbox\hbox{##1.\quad} \hangindent\wd\tempbox\noindent{##1}\quad\ignorespaces##2\par} \section*{NOMENCLATURE}}{\par\addvspace{12pt}} % Acknowledgement environment \newenvironment{acknowledgment}{% \section*{ACKNOWLEDGMENT}}{\par\addvspace{12pt}} % The following are the new theorem definitions \AtEndOfClass{% \def\@begintheorem#1#2{\trivlist \item[\hskip \labelsep% {\tensfb #1\ #2.}]\it} \def\@opargbegintheorem#1#2#3{\trivlist \item[\hskip \labelsep% {\tensfb #1\ #2\ (#3).}]\it} \def\newtheorem{\@ifstar{\@newstheorem}{\@newtheorem}} \def\@newtheorem#1{\@ifnextchar[{\@othm{#1}}{\@nthm{#1}}} \def\@newstheorem#1#2{\@namedef{#1*} {\@ifnextchar[{\@opargbeginstheorem{#2}}{\@beginstheorem{#2}}}% \@namedef{end#1*}{\@endtheorem}} \def\@beginstheorem#1{\trivlist \item[\hskip \labelsep% {\tensfb #1.}]\it} \def\@opargbeginstheorem#1[#2]{\trivlist\item[\hskip \labelsep% {\tensfb #1\ (#2). }]\it} % \def\proof{\@ifnextchar[{\@optargproof}{\@proof}} \def\@proof{\trivlist \item[\hskip \labelsep{\it Proof.}]} \def\@optargproof[#1]{\trivlist \item[\hskip \labelsep{\it #1.}]} \def\endproof{\endtrivlist} \def\qed{\vskip-\lastskip\vskip-\baselineskip\hbox to \hsize{\hfill$\Box$}} } % ------------------------------------------------------------------------- % Header and Footer Definitions % ------------------------------------------------------------------------- \if@twoside \def\ps@headings{% \let\@oddfoot\@empty\let\@evenfoot\@empty \def\@evenhead{\thepage\hfil\slshape\leftmark}% \def\@oddhead{{\slshape\rightmark}\hfil\thepage}% \let\@mkboth\markboth \def\sectionmark##1{% \markboth {\MakeUppercase{% \ifnum \c@secnumdepth >\z@ \thesection\hskip 1em\relax \fi ##1}}{}}% \def\subsectionmark##1{% \markright {% \ifnum \c@secnumdepth >\@ne \thesubsection\quad \fi ##1}}} \else \def\ps@headings{% \let\@oddfoot\@empty \def\@oddhead{{\slshape\rightmark}\hfil\thepage}% \let\@mkboth\markboth \def\sectionmark##1{% \markright {\MakeUppercase{% \ifnum \c@secnumdepth >\m@ne \thesection\quad \fi ##1}}}} \fi \if@cleanfoot \def\ps@myheadings{% \let\@mkboth\@gobbletwo \def\@oddfoot{\hfil\thepage\hfil} \def\@evenfoot{\hfil\thepage\hfil} \let\@oddhead\@empty\let\@evenhead\@empty \def\sectionmark##1{} \def\subsectionmark##1{} } \def\ps@plain{\let\@mkboth\@gobbletwo \def\@oddhead{$\smash{\raise72pt\hbox% {\scriptsize\today\qquad\currenttime}}$\hfill}% \def\@oddfoot{\reset@font\rm \hfil\thepage% \hfil}% \let\@evenhead\@oddhead\let\@evenfoot\@oddfoot} \else \def\ps@myheadings{% \let\@mkboth\@gobbletwo \def\@oddfoot{\hskip1.55in\hfil\thepage\hfil Copyright\ \ \copyright\ \@confyear% ~by ASME}% \def\@evenfoot{\hskip1.55in\hfil\thepage\hfil Copyright\ \ \copyright\ \@confyear% ~by ASME}% \let\@oddhead\@empty \let\@evenhead\@empty \def\sectionmark##1{} \def\subsectionmark##1{} } \def\ps@plain{\let\@mkboth\@gobbletwo \def\@oddhead{$\smash{\raise72pt\hbox% {\scriptsize\today\qquad\currenttime}}$\hfill}% \def\@oddfoot{\reset@font\rm\hskip1.55in\hfil\thepage% \hfil Copyright\ \ \copyright\ \@confyear\ by ASME}% \let\@evenhead\@oddhead\let\@evenfoot\@oddfoot} \fi %\def\ps@myheadings{% % \let\@mkboth\@gobbletwo % \ifthenelse{\@cleanfoot = 1}{ % \def\@oddfoot{\hskip1.55in\hfil\thepage} % \def\@evenfoot{\hskip1.55in\hfil\thepage}} % {\def\@oddfoot{\hskip1.55in\hfil\thepage\hfil Copyright\ \ \copyright\ \confyear% % ~by ASME}% % \def\@evenfoot{\hskip1.55in\hfil\thepage\hfil Copyright\ \ \copyright\ \confyear% % ~by ASME}%} % %\let\@oddhead\@empty %\let\@evenhead\@empty %% \def\@evenhead{\hfil\sl\leftmark\hfil}% %% \def\@oddhead{\hfil\sl\rightmark\hfil}% % \def\sectionmark##1{} % \def\subsectionmark##1{} % } \mark{{}{}} %\def\ps@plain{\let\@mkboth\@gobbletwo % \def\@oddhead{$\smash{\raise72pt\hbox% % {\scriptsize\today\qquad\currenttime}}$\hfill}% % \def\@oddfoot{\reset@font\rm\hskip1.55in\hfil\thepage% % \hfil Copyright\ \ \copyright\ \confyear\ by ASME}% % \let\@evenhead\@oddhead\let\@evenfoot\@oddfoot} \newcount\minute\newcount\hour \def\currenttime{\minute\time\hour\minute\divide\hour60 \the\hour:\multiply\hour60\advance\minute-\hour\the\minute} \markboth{}{} \ps@myheadings \pagenumbering{arabic} \if@twocolumn\twocolumn\sloppy\flushbottom\else\onecolumn\fi \advance\hoffset-7pc \advance\voffset-10pc % % \endinput % End of Class