C:\> C:\>boot pcioico Boots: PicoDOS C:\>res Resetting... ---------------------------------------------------------------- Persistor CF21M SN 02297 PicoDOS V2.28r3 PBM V2.27 (C) 1998-2003 Persistor Instruments Inc. - www.persistor.com ---------------------------------------------------------------- The clock needs setting if it's not October 20, 1991! C:\>dir Volume in drive C is NONAME Volume Serial Number is 4784-500C Directory of C:\ 0 file(s) 0 bytes 0 dir(s) 511,934,464 bytes free C:\>G boot app Next: => A - Program at E40000 PBM>res Resetting... deploy.dat does not exist. Continuing with deployment with default schedule. This can be modified by hitting Ctrl-X below and entering menu Hit Ctrl-X within 3 seconds to enter set-up 3..2.. Enter M to Enter Main Menu 1) Set Date and Time 2) File Actions 3) Set Deploy Parameters 4) Calibrate Accelerometers 5) Verify and Deploy 6) Data Offload 7) Exit to PicoDos 8) Sleep Enter Selection: ? 1 Current date and time: Sun Oct 20 23:00:07 1991 Reset date and time? [N] ? y Enter Date: [10/20/1991] ? 04/21/20034 Enter Time: [23:00:10] ? 19:03:00 Current date and time: Wed Apr 21 19:03:00 2004 Current date and time: Wed Apr 21 19:03:01 2004 Current date and time: Wed Apr 21 19:03:03 2004 Current date and time: Wed Apr 21 19:03:04 2004 Current date and time: Wed Apr 21 19:03:05 2004 Is time Correct? [Y] ? 1) Set Date and Time 2) File Actions 3) Set Deploy Parameters 4) Calibrate Accelerometers 5) Verify and Deploy 6) Data Offload 7) Exit to PicoDos 8) Sleep Enter Selection: ? 4 Calibrate Accelerometers selected Position axis 1 to positive one g (point upwards) Hit space bar when positioned TCR1 Clock = 160000 Hz positive g on time = 8036 counts Position axis 1 to negative one g (point downwards) Hit space bar when positioned negative g on time = 4887 counts period length = 13715 counts Calibration of axis 1 complete bias = 8.7107 offset = -4.10384 Position axis 2 to positive one g (point upwards) Hit space bar when positioned TCR1 Clock = 160000 Hz positive g on time = 5354 counts Position axis 2 to negative one g (point downwards) Hit space bar when positioned negative g on time = 8427 counts period length = 13559 counts Calibration of axis 2 complete bias = -8.8246 offset = 4.48454 Position axis 3 to positive one g (point upwards) Hit space bar when positioned TCR1 Clock = 160000 Hz positive g on time = 5294 counts Position axis 3 to negative one g (point downwards) Hit space bar when positioned negative g on time = 8372 counts period length = 13710 counts Calibration of axis 3 complete bias = -8.90838 offset = 4.4399 1) Set Date and Time 2) File Actions 3) Set Deploy Parameters 4) Calibrate Accelerometers 5) Verify and Deploy 6) Data Offload 7) Exit to PicoDos 8) Sleep Enter Selection: ? 3 Set Deploy Parameters selected <--------------------Sample Period-------------------> ___________________ _____ | | | | | | | | | __| |_________________________________| <--Sample Duration--> Enter sample period (seconds): [3600] ? Enter sample duration (seconds): [600] ? 900 Enter measurement frequency (Hz): [10] ? Enter date and time to take first measurement Enter Date: [04/21/2004] ? Enter Time: [20:05:10] ? 20:00:00 Enter date and time to take final measurement Enter Date: [04/21/2005] ? Enter Time: [20:00:00] ? Sample Period = 3600 seconds Sample Duration = 900 seconds Measurement Frequency = 10 Hz The first measurements will be made at Wed Apr 21 20:00:00 2004 The last measurements will be made at Thu Apr 21 20:00:00 2005 Is this correct? [Y] ? 1) Set Date and Time 2) File Actions 3) Set Deploy Parameters 4) Calibrate Accelerometers 5) Verify and Deploy 6) Data Offload 7) Exit to PicoDos 8) Sleep Enter Selection: ? 5 Verify and Deploy selected using 51ms Timer Actual Measurement Frequency = 9.803922 Hz Actual Sample Duration = 904.127991 Seconds Memory Requirements per Sample = 53248 bytes Is this correct? [Y] ? Storing setup in deploy.dat Sleeping until Wed Apr 21 20:00:00 2004