Index of /internal/projects/600027.MOOS.Mooring/MTMSeriesDesignDocuments/MooringMechanicalDesignDrawings/MTM4DesignDrawings/Mech_Drawings_MOOS_MTM4/FFS MOORING FILES

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]#8_Male-Female Threaded Hex StandOff.sldprt2007-04-02 13:14 149K 
[ ]00409_IBC_EndPlate_V2.sldprt2007-04-02 13:15 663K 
[ ]00805-IBC_CardRetainer.sldprt2007-04-02 13:15 189K 
[ ]1.5Angle.SLDPRT2008-11-10 13:39 337K 
[ ]1.25inPVC_DrainPipe.SLDPRT2007-04-02 10:26 134K 
[ ]1inPipeCase_V3.sldprt2007-04-02 16:34 173K 
[ ]2inPVC_Pipe.SLDPRT2007-04-02 10:26 142K 
[ ]2ndry Node.SLDASM2008-11-10 13:41 2.9M 
[ ]3_8-16 Insert.SLDPRT2007-04-02 11:08 242K 
[ ]4inPVC_Pipe.SLDPRT2007-04-02 10:26 138K 
[ ]4 leg.bridle.assembley.SLDASM2009-01-28 15:42 670K 
[ ]4 leg bridle_V3.sldasm2009-01-28 15:42 582K 
[ ]4 leg tower_V3.sldasm2009-01-28 15:42 1.8M 
[ ]6L-CW4S4_w2c20047.sldprt2007-04-02 13:34 168K 
[ ]48-12V_Conv_Bracket.SLDPRT2006-06-06 15:52 678K 
[ ]48-12V_Conv_Bracket2.SLDPRT2006-06-08 10:40 1.3M 
[ ]48-12V_Converter.SLDPRT2006-01-17 17:38 262K 
[ ]300W_Resistor.SLDPRT2005-05-10 12:54 172K 
[ ]1002253-B_HoseBarb.SLDPRT2007-04-02 11:57 137K 
[ ]1002863_DeConnNodeCase.SLDPRT2007-04-02 13:15 268K 
[ ]10020294 Large Support Base Ring.PDF2009-01-29 16:13 117K 
[ ]10020294 Large Support Base Ring.SLDDRW2010-12-07 11:38 443K 
[ ]10020294 Large Support Base Ring.SLDPRT2010-12-07 08:55 213K 
[ ]10020295 MOOS Small Support Base Ring.SLDDRW2009-01-29 11:50 400K 
[ ]10020295 Small Support Base Ring.PDF2009-01-29 16:03 129K 
[ ]10020295 Small Support Base Ring.SLDDRW2010-12-07 11:38 518K 
[ ]10020295 Small Support Base Ring.SLDPRT2010-12-07 08:55 221K 
[ ]10020296 Base Support Tube.PDF2010-12-07 08:59 170K 
[ ]10020296 Base Support Tube.SLDDRW2010-12-07 11:38 412K 
[ ]10020296 Base Support Tube.SLDPRT2010-12-07 08:55 148K 
[ ]10020298 MOOS Wind Generator Support Base Assembly.PDF2009-01-29 16:40 205K 
[ ]10020298 MOOS Wind Generator Support Base Assembly.SLDASM2010-12-07 08:55 829K 
[ ]10020298 MOOS Wind Generator Support Base Assembly.SLDDRW2010-12-07 11:39 1.1M 
[ ]10020299 MOOS Tapered Female Bushing Insert.PDF2009-01-29 13:53 97K 
[ ]10020299 MOOS Tapered Female Bushing Insert.SLDDRW2010-12-07 11:39 565K 
[ ]10020299 Tapered Female Bushing Insert.SLDPRT2010-12-07 08:53 444K 
[ ]10020300 MOOS Tapered Male Bushing.PDF2009-01-29 14:29 100K 
[ ]10020300 MOOS Tapered Male Bushing.SLDDRW2010-12-07 11:39 615K 
[ ]10020300 Tapered Male Bushing.SLDPRT2010-12-07 08:51 267K 
[ ]10020301 Ring for Tapered Male Bushing.PDF2009-01-29 16:34 110K 
[ ]10020301 Ring for Tapered Male Bushing.SLDDRW2010-12-07 11:39 475K 
[ ]10020301 Ring for Tapered Male Bushing.SLDPRT2010-12-07 11:39 228K 
[ ]10020301 Tapered Male Bushing Ring.SLDPRT2009-01-29 16:21 112K 
[ ]10020302 Wind Generator Support Pipe.PDF2009-01-29 17:01 89K 
[ ]10020302 Wind Generator Support Pipe.SLDDRW2010-12-07 11:39 440K 
[ ]10020302 Wind Generator Support Pipe.SLDPRT2010-12-07 11:39 165K 
[ ]ADCP-RDI_967-6021.SLDPRT2007-04-02 16:35 218K 
[ ]ADCP support bushing.SLDPRT2009-01-28 15:42 205K 
[ ]ADCP support pipe.sldprt2009-01-28 15:42 104K 
[ ]ANGLE_.5X.5.SLDPRT2009-01-27 10:52 110K 
[ ]ANSI_flange.sldprt2009-01-28 15:42 173K 
[ ]Air.SLDPRT2008-11-10 13:41 121K 
[ ]Asimet-Humidity.SLDPRT2007-04-02 16:34 604K 
[ ]Asimet-Pressure.SLDPRT2007-04-02 16:34 185K 
[ ]Asimet-SWR-LWR.SLDPRT2007-04-02 16:34 173K 
[ ]Asimet-WindBird-Assem.SLDASM2008-11-10 13:41 661K 
[ ]Asimet-WindBird_Base.sldprt2007-04-02 16:34 120K 
[ ]Asimet SWR Mast Mount.SLDPRT2007-04-02 16:34 282K 
[ ]BackHandle.SLDPRT2007-04-02 16:35 163K 
[ ]BallastTube_Assem.sldasm2009-01-28 15:42 95K 
[ ]Barrel Nut. 0..500 in dia x 1.00 in .SLDPRT2009-01-21 15:34 185K 
[ ]Barrel Nut. 0.500 in dia x 1.00 in .SLDPRT2009-01-21 16:43 238K 
[ ]Barrel Nut. 0.500 in dia x 1.50 in .SLDPRT2009-01-21 17:04 239K 
[ ]Batbox_Z136-192A.sldprt2007-04-02 16:35 272K 
[ ]BattBox_Flange_V2.sldprt2007-04-02 16:35 377K 
[ ]BattBox_Holddown_V2.sldprt2007-04-02 16:35 152K 
[ ]BattBox_Lid_V2.sldprt2007-04-02 16:35 577K 
[ ]Batt_Base_V2.SLDPRT2006-04-21 11:18 461K 
[ ]Bearing_Guide bottom.sldprt2009-01-28 15:42 144K 
[ ]Bearing_Guide top.sldprt2009-01-28 15:42 146K 
[ ]BoardAssembly.SLDPRT2003-12-02 13:13 1.1M 
[ ]Brusa-Induct_Bracket.SLDPRT2006-04-21 11:27 336K 
[ ]Brusa_Bracket.SLDPRT2006-04-21 11:27 763K 
[ ]Brusa_MPPT.SLDPRT2006-04-21 11:27 558K 
[ ]Buoy Structure_V2.SLDASM2009-01-28 15:42 2.0M 
[ ]C-MODULE.SLDPRT2009-01-27 10:52 313K 
[ ]CHANNEL.SLDPRT2009-01-23 15:01 262K 
[ ]Cablemax 9-49C.sldprt2009-01-28 15:42 132K 
[ ]Cap-Mount_V3.sldprt2007-04-02 16:34 630K 
[ ]CardDisk_Guide Ring.SLDPRT2005-12-14 09:28 419K 
[ ]CardLock-LS Angle_AAI.sldprt2007-04-02 11:59 295K 
[ ]CardLock-Pad.sldprt2008-11-10 13:41 97K 
[ ]Case-Tower_Brace.SLDPRT2007-04-02 16:34 198K 
[ ]Catylator.SLDPRT2006-04-21 11:18 129K 
[ ]ChassisBumper_V2.SLDPRT2006-09-07 14:12 879K 
[ ]ChassisBumper_V2_Mirror.SLDPRT2008-11-10 13:41 134K 
[ ]ClampBackHalf.sldprt2007-04-02 16:34 98K 
[ ]ClampFrontHalf.sldprt2007-04-02 16:34 131K 
[ ]Clamp_Rod.SLDASM2008-11-10 13:41 366K 
[ ]Clamp_Rod_End.SLDPRT2007-04-02 10:26 113K 
[ ]Comp Spring - ground.SLDPRT2005-05-10 12:54 6.9M 
[ ]Compass Bracket_V2.SLDPRT2005-12-14 09:35 602K 
[ ]ControlCable.SLDPRT2003-04-10 18:19 348K 
[ ]Countersunk External Tooth Lock Washers (U.S.).SLDPRT2005-12-14 09:28 511K 
[ ]CuNi Tube.sldprt2009-01-28 15:42 115K 
[ ]CuNi_Cap.sldprt2009-01-28 15:42 202K 
[ ]DGO-1100001.101.sldprt2007-04-02 16:34 135K 
[ ]DeConn_ClosureBand.sldprt2007-04-02 13:14 166K 
[ ]Dessicant-UnitPak.SLDPRT2005-12-14 09:28 486K 
[ ]Dessicant Bracket_V1.SLDPRT2005-12-14 09:35 756K 
[ ]Door-Bushing _PCC-C27630.SLDPRT2007-04-02 08:27 214K 
[ ]DoorHinge_Drill-Jig.SLDPRT2008-11-10 13:41 299K 
[ ]DoorTab_V3.SLDPRT2008-11-10 13:39 222K 
[ ]Door_Frame_HingeBar_V3.SLDPRT2008-11-10 13:39 638K 
[ ]Door_Handle.SLDPRT2009-01-28 15:42 213K 
[DIR]Dual Wind Generator/2009-10-08 15:31 -  
[ ]E-CAGE-1.sldasm2009-01-28 15:42 439K 
[ ]E-Cage-1.SLDPRT2009-01-28 15:42 579K 
[ ]E-Cage-2.SLDPRT2009-01-28 15:42 259K 
[ ]ENDCAP2.SLDPRT2009-01-27 10:52 89K 
[ ]ElevCage-1.sldasm2009-01-28 15:42 1.5M 
[ ]End.Cap.sldprt2007-04-02 13:15 1.7M 
[ ]EndCap-Plug.sldprt2008-11-10 13:39 396K 
[ ]FW 0.5.sldprt2007-04-02 09:32 106K 
[ ]FW 0.25.sldprt2002-02-19 08:54 144K 
[ ]Fiber Adaptor Bracket.SLDPRT2005-12-14 09:35 312K 
[ ]Fillister Head Screws (U.S.).sldprt2008-11-10 13:39 357K 
[ ]Flat Washer Type A Narrow_AI.sldprt2006-04-21 11:18 309K 
[ ]Flat Washer Type A Wide_AI.sldprt2007-04-02 10:26 136K 
[ ]Flat Washers (U.S.).sldprt2007-04-02 16:34 225K 
[ ]FreeWave_4.5.SLDPRT2007-04-02 16:34 129K 
[ ]FultonTrailerWinch-T1100.SLDPRT2007-04-02 11:08 102K 
[ ]Gasket_V2.sldprt2007-04-02 16:35 192K 
[ ]Generator Support Bushing.SLDPRT2009-01-21 13:38 157K 
[ ]Generator Support Pipe.SLDPRT2009-01-23 14:53 139K 
[ ]Generator Support Pipe Assembly.SLDASM2009-01-27 10:54 471K 
[ ]GlobalTrackerPTT.SLDPRT2007-04-02 16:34 207K 
[ ]Ground Strap.SLDPRT2009-01-28 15:42 146K 
[ ]GroundingBracket.SLDPRT2007-04-02 12:10 394K 
[ ]HBOLT 0.2500-20x1.5x1.5-N.SLDPRT2005-05-10 15:09 243K 
[ ]HBOLT 0.2500-20x1x1-N.SLDPRT2007-04-02 09:32 166K 
[ ]HBOLT 0.5000-13x1x1-N.SLDPRT2007-04-02 09:32 159K 
[ ]HBOLT 0.7500-10x3.5x3.5-N.sldprt2007-04-02 08:36 171K 
[ ]HNUT 0.7500-10-D-N.sldprt2007-04-02 08:36 268K 
[ ]HOUSING-WELDMENT.SLDASM2009-01-23 15:01 213K 
[ ]HOUSING.SLDPRT2009-01-23 15:01 144K 
[ ]HairClip_Pin.SLDPRT2007-04-02 16:35 154K 
[ ]Hex Bolt_AI.SLDPRT2007-04-02 10:51 200K 
[ ]Hex Finished Bolt_AI.SLDPRT2007-04-02 16:35 348K 
[ ]Hex Head Cap Screws (U.S.).SLDPRT2007-04-02 13:17 955K 
[ ]Hex Nut_AI.sldprt2007-04-02 10:51 255K 
[ ]Hyper-OCR-Es_Assem.SLDASM2008-11-10 13:41 123K 
[ ]IBC Circuit Board.SLDPRT2007-04-02 13:15 474K 
[ ]IBC Circuit Board2.SLDPRT2007-04-02 13:15 469K 
[ ]ISUS_SatLantic.SLDPRT2007-04-02 16:34 180K 
[ ]Impulse_WetPlug_BH-8-FS.sldprt2007-04-02 16:34 245K 
[ ]Impulse_WetPlug_BH-8-MP.sldprt2007-04-02 16:34 330K 
[ ]Isolator Plate.sldprt2007-04-02 13:14 147K 
[ ]JammNut_MSSP-BCR.sldprt2008-11-10 13:41 86K 
[ ]Kapton Tape.SLDPRT2003-12-02 13:13 122K 
[ ]Knob_SocHdCap.sldprt2007-04-02 16:34 119K 
[ ]LOCTITE242BLUE.SLDPRT2006-04-21 11:18 108K 
[ ]Ladder.SLDPRT2009-01-28 15:42 173K 
[ ]Large.Hor.Tubes-short.SLDPRT2009-01-28 15:42 159K 
[ ]Large Support Base Ring.SLDDRW2009-01-29 11:17 446K 
[ ]Large Support Base Ring.SLDPRT2009-01-29 11:17 158K 
[ ]Latch-Bushing .sldprt2007-04-02 08:25 182K 
[ ]Lead.SLDPRT2009-01-28 15:42 81K 
[ ]Leg Gussett.SLDPRT2009-01-28 15:42 160K 
[ ]Load Dump Bridle Bar Mount.sldprt2009-01-28 15:42 272K 
[ ]LoadDump_Assem.sldasm2008-11-10 13:42 671K 
[ ]Lock Washer Spring Extra Duty_AI.sldprt2007-04-02 16:35 137K 
[ ]Long_Panel_Assem_V3.sldasm2009-01-28 15:42 1.7M 
[ ]MAST.SLDPRT2002-01-24 09:28 153K 
[ ]METSYS-ASSY_V2002.SLDASM2009-01-23 15:02 819K 
[ ]MMC-6IBC Backplane PCB.SLDPRT2007-04-02 13:15 160K 
[ ]MMC-DPA-Backplane.sldasm2008-11-10 13:41 972K 
[ ]MMC-OASIS.Rail.SLDPRT2007-04-02 11:51 1.1M 
[ ]MMC-Rail.IBC.BckPlne.sldprt2007-04-02 13:15 151K 
[ ]MMC-Rail.IBC.Card.Guide.sldprt2007-04-02 13:15 140K 
[ ]MMC.IBC.CardGuide.Disk.SLDPRT2008-11-10 13:40 1.3M 
[ ]MMC DPA Bkpln Skt-593 776.sldprt2007-04-02 13:15 1.5M 
[ ]MMC DPA Bkpln Skt.sldprt2007-04-02 13:15 1.3M 
[ ]MMC can_V2.sldasm2008-11-10 13:41 412K 
[ ]MMC can assy.sldasm2008-11-10 13:41 770K 
[ ]MMC can base.SLDPRT2007-04-02 16:35 276K 
[ ]MMC can flange.SLDPRT2008-11-10 13:41 287K 
[ ]MMC can tube_V2.SLDPRT2007-04-02 16:35 243K 
[ ]MOOS-IBC Card Guide.sldprt2007-04-02 13:15 649K 
[ ]MOOS Wind Generator Support Base Assembly.SLDASM2009-02-10 08:39 800K 
[ ]MOOS Wind Generator Support Base Assembly.SLDDRW2009-01-29 09:17 479K 
[ ]MOOS_Buoy-MTM4.SLDASM2009-01-29 17:06 6.9M 
[ ]MOUNT-BRACKET.SLDPRT2009-01-27 10:52 180K 
[ ]MOUNT-RING.SLDPRT2009-01-27 10:52 122K 
[ ]MarmonClamp_V31.sldprt2007-04-02 16:34 158K 
[ ]MiniSpec-I_SatLantic.SLDPRT2007-04-02 13:34 267K 
[ ]MiniSpec_Clamp_V2.SLDPRT2008-11-10 13:39 712K 
[ ]Moos-IBC Interior Assemby.SLDASM2008-11-10 13:41 2.2M 
[ ]Moos-IBC Interior Rails.SLDASM2008-11-10 13:41 1.2M 
[ ]Moos-IBC_Mount.Disk.SLDPRT2005-12-14 09:35 761K 
[ ]Moos-MMC-OpticalPlate.SLDPRT2007-03-22 16:40 527K 
[ ]Moos-NMC_Can.mount plate.sldprt2009-01-28 15:42 230K 
[ ]Moos-NMC_ControlCan_Assem.SLDASM2008-11-10 13:41 2.6M 
[ ]Moos-PWR_Can.mount plate.SLDPRT2009-01-27 14:05 276K 
[ ]Moos-PowerCan assy.SLDASM2008-11-10 13:41 2.8M 
[ ]MoosControllerCan End Cap.sldprt2007-04-02 16:34 1.2M 
[ ]MoosPowerCan End Cap.sldprt2007-04-02 16:35 1.9M 
[ ]MoosPwr-IBC Interior.SLDASM2008-11-10 13:41 5.6M 
[ ]MoosPwr-IBC Interior Rails.sldasm2008-11-10 13:41 1.6M 
[ ]Moos elevator rod.sldprt2009-01-28 15:42 106K 
[ ]NMC-can_mount.SLDPRT2007-04-02 11:33 208K 
[ ]NMC SideArm Bkpln Skt.sldprt2007-04-02 13:15 1.8M 
[ ]NMC can mount.SLDPRT2007-04-02 13:34 194K 
[ ]NPT-M_HOSEBARB.SLDPRT2006-04-21 11:27 286K 
[ ]New-Door_Frame_LatchBar.SLDPRT2009-01-28 15:42 626K 
[ ]Node-Interior-Assem.sldasm2008-11-10 13:41 1.2M 
[ ]Nylok Nut.sldprt2007-04-02 16:35 344K 
[ ]O-Ring.sldprt2005-05-10 12:54 757K 
[ ]Oasis Rail Retention Clip.SLDPRT2007-04-02 12:14 203K 
[ ]Oil-Cold.SLDPRT2008-11-10 13:41 383K 
[ ]Oil-Fill.SLDPRT2005-05-10 12:54 320K 
[ ]Oil-Hot.SLDPRT2008-11-10 13:41 131K 
[ ]Omega_99-110-NT-20.SLDPRT2006-04-21 11:27 1.3M 
[ ]Omega_99-129-NT.SLDPRT2005-12-14 09:28 2.1M 
[ ]PAGER-Wire.SLDPRT2008-11-10 13:41 250K 
[ ]PC_104.SLDPRT2009-01-27 10:52 109K 
[ ]PDF 1 Top MOOS_Buoy-MTM4.PDF2008-11-19 15:01 375K 
[ ]PDF 2 Front MOOS_Buoy-MTM4.PDF2008-11-19 15:02 484K 
[ ]PDF 3 Left MOOS_Buoy-MTM4.PDF2008-11-19 15:03 356K 
[ ]PDF 4 Trimetric MOOS_Buoy-MTM4.PDF2008-11-19 15:05 323K 
[ ]PRESS-TRANS.SLDPRT2009-01-27 10:52 389K 
[ ]PUC_V3-Assem.sldasm2008-11-10 13:41 773K 
[ ]PagerReset_P4.5-01SS-8.6.SLDPRT2007-04-02 16:36 118K 
[ ]Panel Nut.sldprt2007-04-02 13:15 180K 
[ ]PanelTrim.SLDPRT2008-11-10 13:39 446K 
[ ]Penn-Clamp.SLDPRT2007-04-02 11:16 239K 
[ ]PowerCable.SLDPRT2003-04-10 18:19 228K 
[ ]Press-Vent_Assem.SLDASM2008-11-10 13:41 467K 
[ ]Puck-Mount.sldprt2007-04-02 16:34 269K 
[ ]PwrCase-Tower_Brace.SLDPRT2007-04-02 16:34 192K 
[ ]RADIO-ShortRange_Wire.SLDPRT2007-04-02 16:34 243K 
[ ]RD Inst BattPack Leg Mount.SLDPRT2004-11-01 14:37 641K 
[ ]RD inst batt pack.SLDASM2008-11-10 13:41 636K 
[ ]RD inst batt pack body.SLDPRT2004-11-01 14:37 261K 
[ ]RD inst batt pack end cap.SLDPRT2004-11-01 14:37 777K 
[ ]Re-entrant_Potting.SLDPRT2008-11-10 13:39 62K 
[ ]Regular Spring Lock Washers (U.S.).SLDPRT2003-12-02 13:13 340K 
[ ]ResistorSupport.SLDPRT2005-05-10 12:54 1.7M 
[ ]SBE Board.SLDPRT2007-04-02 16:34 78K 
[ ]SEACAT C-T SBE16.SLDPRT2007-04-02 16:34 276K 
[ ]SS-400-1-4ST.sldprt2007-04-02 16:35 161K 
[ ]SS-400-P.sldprt2007-04-02 16:35 154K 
[ ]SS_401-PC_w2c20054.sldprt2007-04-02 13:34 73K 
[ ]SatComm.SLDPRT2008-11-10 14:03 219K 
[ ]ScheaferBlock-705.SLDPRT2008-11-10 13:41 68K 
[ ]SeaCon_AllWet_AWM-8XP-BC.sldprt2009-01-28 15:42 168K 
[ ]SeaCon_AllWet_AWQ-4.24-S-BC.sldprt2007-04-02 16:35 252K 
[ ]SeaCon_AllWet_AWQ-4.24-S-BC_BLANK.SLDPRT2006-03-09 11:37 192K 
[ ]SeaCon_MINK-BCR.sldprt2007-04-02 16:35 148K 
[ ]SeaCon_MSSP-BCR.sldprt2007-04-02 16:34 162K 
[ ]Seacon_Min-F-1FO-BCRL.sldprt2007-04-02 13:14 196K 
[ ]Seal_Sleeve.sldprt2009-01-28 15:42 188K 
[ ]Siemans_ SolarMod-SP150.sldprt2008-11-10 13:40 280K 
[ ]Small-PC.SLDPRT2009-01-27 10:52 107K 
[ ]Small.Hor.Tubes-short.SLDPRT2009-01-27 14:05 156K 
[ ]Small Prevco Clamp.SLDPRT2007-04-02 11:32 255K 
[ ]Small Support Base Ring.SLDDRW2009-01-28 13:34 434K 
[ ]Small Support Base Ring.SLDPRT2009-01-27 16:45 198K 
[ ]SocHd Shldr Scrw (#6-32xhalf).SLDPRT2007-04-02 11:39 549K 
[ ]Socket Head Cap Screw_AI.SLDPRT2007-04-02 10:51 247K 
[ ]Socket Head Cap Screws (U.S.).SLDPRT2008-12-02 09:20 1.5M 
[ ]SolarPanelDoorHandleLatch.SLDPRT2007-04-02 08:24 383K 
[ ]SonicAnom.SLDPRT2002-02-26 09:24 342K 
[ ]Spring Pin (U.S.).SLDPRT2007-04-02 16:34 413K 
[ ]Stand-Off_Plate.SLDPRT2006-04-21 11:27 245K 
[ ]Standoff-.5.SLDPRT2009-01-23 15:01 74K 
[ ]Standoff-.25.SLDPRT2009-01-23 15:01 76K 
[ ]Standoff-1.5.SLDPRT2009-01-27 10:52 89K 
[ ]SuperWind 350 Blade.SLDPRT2009-01-23 15:01 334K 
[ ]SuperWind 350 Generator.SLDPRT2009-01-23 14:43 971K 
[ ]SuperWind 350 Hub.SLDPRT2009-01-27 10:53 500K 
[ ]SuperWind 350 Rudder.SLDPRT2009-01-27 10:54 600K 
[ ]Superwind 350 Generator Assy.SLDASM2009-01-23 14:43 698K 
[ ]Support Base Tube.SLDDRW2009-01-28 14:44 325K 
[ ]Support Base Tube.SLDPRT2009-01-27 13:35 119K 
[ ]TOP-CAP.SLDPRT2009-01-23 15:01 362K 
[ ]Tapered Female Bushing-Bushing Lateral Force.CSY2009-01-22 13:56 9.3K 
[ ]Tapered Female Bushing-Bushing Lateral Force.CWR2009-01-22 13:56 2.7M 
[ ]Tapered Female Bushing-Bushing Lateral Force.ILC2009-01-22 13:56 1.5K 
[ ]Tapered Female Bushing-Tapered Female Bushing-1.doc2009-01-26 09:28 280K 
[ ]Tapered Female Bushing-Tapered Female Bushing.CWR2009-01-22 14:19 49M 
[ ]Tapered Female Bushing-Tapered Female Bushing.LOG2009-01-22 14:19 120  
[DIR]Tapered Female Bushing-Tapered Female Bushing/2009-01-23 09:44 -  
[ ]Tapered Female Bushing.SLDPRT2009-01-27 10:42 555K 
[ ]Tapered Female Bushing Insert.SLDPRT2009-01-29 11:27 809K 
[ ]Tapered Male Bushing.SLDPRT2009-01-27 13:35 223K 
[ ]Tapered Male Bushing Ring.SLDPRT2009-01-27 13:35 140K 
[ ]TeklamPanelAssem.sldasm2009-01-28 15:42 145K 
[ ]TeklamPanel_EdgeSeal.sldprt2009-01-28 15:42 172K 
[ ]Teklam_HoneyComb-Plate.sldprt2009-01-28 15:42 451K 
[ ]Temp-Assem.SLDASM2009-01-21 13:36 262K 
[ ]Thumbs.db2021-11-29 12:34 1.0M 
[ ]TieRodBushing.SLDPRT2007-04-02 10:26 88K 
[ ]Top_Spacer.SLDPRT2006-04-21 11:18 178K 
[ ]Trace-Bracket1.SLDPRT2006-04-21 11:27 1.1M 
[ ]Trace-Bracket1Mirror.SLDPRT2008-11-10 13:41 426K 
[ ]Trace.SLDPRT2006-04-21 11:27 446K 
[ ]TriAxis.SLDPRT2007-04-02 16:34 186K 
[ ]TrimCaulk.sldprt2007-04-02 16:35 109K 
[ ]Tygon Tube.SLDPRT2007-04-02 13:34 380K 
[ ]U-Bolt.SLDPRT2007-04-02 11:08 159K 
[ ]UHMW-Clamp-1.sldprt2009-01-28 15:42 202K 
[ ]UHMW clamp thread insert.sldprt2007-04-02 10:51 131K 
[ ]VOSS_V-BandCoupling.SLDPRT2007-04-02 13:14 221K 
[ ]Winch Base.SLDPRT2007-04-02 11:08 290K 
[ ]Winch_Mount.SLDASM2008-11-10 13:42 349K 
[ ]WindBird-Mast.sldprt2008-11-10 13:40 315K 
[ ]WindGenMount_Assem.SLDASM2009-01-27 15:42 342K 
[ ]WindGenMount_Frame.sldprt2009-01-28 15:42 186K 
[ ]WindGenMount_Socket.sldprt2009-01-28 15:42 266K 
[ ]Wind Generator Foundation Assy.SLDASM2009-02-11 15:48 962K 
[ ]X-Pin.SLDPRT2007-04-02 16:35 148K 
[ ]X-Pin_Bushing.SLDPRT2009-01-28 15:42 107K 
[ ]X-Pin_Nut.SLDPRT2009-01-28 15:42 160K 
[ ]Zinc_SeaSheald.SLDPRT2009-01-28 15:42 138K 
[ ]antenna tubes.SLDPRT2009-01-28 15:42 170K 
[ ]ballast tube.SLDPRT2009-01-28 15:42 119K 
[ ]barry ME-100-02-T.sldprt2007-04-02 13:14 218K 
[ ]base gussets_Assem.sldprt2009-01-28 15:42 157K 
[ ]batbox_V2.sldasm2008-11-10 13:42 1.0M 
[ ]battery_PVX-420T.SLDPRT2006-04-21 11:18 312K 
[ ]bead1.sldprt2009-01-23 15:01 131K 
[ ]bead2.sldprt2009-01-23 15:01 131K 
[ ]bead3.sldprt2009-01-26 17:30 160K 
[ ]bead4.sldprt2009-01-27 10:54 155K 
[ ]bead5.sldprt2009-01-27 10:54 156K 
[ ]bead6.sldprt2010-12-07 11:38 172K 
[ ]bead7.sldprt2009-01-27 10:54 156K 
[ ]bead8.sldprt2009-01-27 10:54 137K 
[ ]bead9.sldprt2010-12-07 08:55 155K 
[ ]bead10.sldprt2010-12-07 08:55 156K 
[ ]bead11.sldprt2010-12-07 08:55 156K 
[ ]bead12.sldprt2010-12-07 08:55 175K 
[ ]bead13.sldprt2010-12-07 08:55 142K 
[ ]bead14.sldprt2010-12-07 08:55 154K 
[ ]bead15.sldprt2010-12-07 08:55 171K 
[ ]bead16.sldprt2010-12-07 08:55 171K 
[ ]bead17.sldprt2010-12-07 08:55 171K 
[ ]bead18.sldprt2010-12-07 08:55 151K 
[ ]bead19.sldprt2010-12-07 08:55 172K 
[ ]big can handle2.sldprt2007-04-02 16:34 337K 
[ ]bridle hardware.SLDASM2008-11-10 13:41 158K 
[ ]buoy_clamp_V2.sldasm2009-01-28 15:42 2.6M 
[ ]buoy_plate_Bottom.SLDPRT2009-01-28 15:42 295K 
[ ]buoy_plate_TopDeck_V2.SLDPRT2009-01-28 15:42 567K 
[ ]clamp_rod.SLDPRT2007-04-02 10:26 111K 
[ ]core instruments.SLDASM2009-01-29 17:06 492K 
[ ]drifter2 CO2 sensor end cap rev a.SLDPRT2007-04-02 16:34 654K 
[ ]drifter housing body.SLDPRT2007-04-02 16:34 138K 
[ ]elevator assembley.sldasm2009-01-28 15:42 938K 
[ ]elevator cage lift tab.sldprt2009-01-28 15:42 121K 
[ ]elevator hardware.sldasm2008-11-10 13:41 91K 
[ ]elevator rod stationary mount plate.sldprt2009-01-28 15:42 126K 
[ ]elevator support tube.sldprt2009-01-28 15:42 156K 
[ ]elevator support tube_2.SLDPRT2009-01-28 15:42 184K 
[ ]elev rod adjusting mount.SLDPRT2009-01-28 15:42 206K 
[ ]elev rod locator.SLDPRT2009-01-28 15:42 127K 
[ ]elev rod tabs.sldprt2009-01-28 15:42 114K 
[ ]elev rod upper isolator bushing.sldprt2009-01-28 15:42 177K 
[ ]garmin GPS 16.SLDPRT2007-04-02 16:34 169K 
[ ]gps mast.SLDPRT2007-04-02 11:34 222K 
[ ]hand rail.sldprt2009-01-28 15:42 148K 
[ ]hardware.sldasm2008-11-10 13:41 787K 
[ ]lift_plate.SLDPRT2007-08-13 10:22 466K 
[ ]long elev rod sleeve.sldprt2009-01-28 15:42 122K 
[ ]mid deck.sldprt2009-01-28 15:42 472K 
[ ]mooring_nuts.SLDPRT2007-04-02 10:26 236K 
[ ]radar reflector.sldprt2007-04-02 16:34 496K 
[ ]rod sleeve lock ring.sldprt2009-01-28 15:42 163K 
[ ]scala UBO-450 ant.SLDPRT2007-04-02 16:36 353K 
[ ]seabuoy_V3.SLDPRT2009-01-28 15:42 298K 
[ ]sealite.SLDPRT2007-04-02 16:34 289K 
[ ]side tubes.sldprt2009-01-28 15:42 136K 
[ ]soinc annemometer.SLDPRT2003-10-30 10:36 323K 
[ ]sonic assembley.SLDASM2008-11-10 13:41 183K 
[ ]spec PRR mount.SLDPRT2007-04-02 16:36 121K 
[ ]tabs.sldprt2009-01-28 15:42 146K 
[ ]top deck.sldprt2009-01-27 16:24 553K 
[ ]top deck mount tabs.SLDPRT2008-11-10 13:40 201K 
[ ]top ring.sldprt2009-01-28 15:42 191K 
[ ]top ring gussets.SLDPRT2009-01-28 15:42 153K 
[ ]top ring support tube.SLDPRT2009-01-28 15:42 152K 
[ ]top tubes.sldprt2009-01-28 15:42 107K 
[ ]tower assem_V3.sldasm2009-01-28 15:42 1.5M 
[ ]tower hardware.SLDASM2008-11-10 13:41 520K 
[ ]tower leg.sldprt2009-01-28 15:42 144K 
[ ]tower leg big.SLDPRT2009-01-28 15:42 497K 
[ ]tower mounting tab.SLDPRT2008-11-10 13:40 146K 
[ ]wind_bird.sldprt2007-04-02 16:34 1.0M 
[ ]wind bird mast.SLDPRT2007-04-02 16:36 115K 
[ ]wind gen.SLDPRT2008-11-10 15:17 2.4M 
[ ]~$1.5Angle.SLDPRT2009-01-27 13:59 5  
[ ]~$4 leg.bridle.assembley.SLDASM2009-01-27 13:58 5  
[ ]~$4 leg bridle_V3.sldasm2009-01-27 13:59 5  
[ ]~$4 leg tower_V3.sldasm2009-01-27 13:59 5  
[ ]~$ADCP support bushing.SLDPRT2009-01-27 13:59 5  
[ ]~$ADCP support pipe.sldprt2009-01-27 13:59 5  
[ ]~$ANSI_flange.sldprt2009-01-27 13:59 5  
[ ]~$Asimet-WindBird-Assem.SLDASM2009-10-08 15:31 5  
[ ]~$Asimet-WindBird_Base.sldprt2009-10-08 15:31 5  
[ ]~$Asimet SWR Mast Mount.SLDPRT2009-10-08 15:31 5  
[ ]~$BallastTube_Assem.sldasm2009-01-27 13:59 5  
[ ]~$Barrel Nut. 0.500 in dia x 1.50 in .SLDPRT2009-01-21 16:07 5  
[ ]~$Bearing_Guide bottom.sldprt2009-01-27 13:59 5  
[ ]~$Bearing_Guide top.sldprt2009-01-27 13:59 5  
[ ]~$Buoy Structure_V2.SLDASM2009-01-27 13:58 5  
[ ]~$Cablemax 9-49C.sldprt2009-01-27 13:59 5  
[ ]~$CuNi Tube.sldprt2009-01-27 13:59 5  
[ ]~$CuNi_Cap.sldprt2009-01-27 13:59 5  
[ ]~$DoorTab_V3.SLDPRT2009-01-27 13:59 5  
[ ]~$Door_Frame_HingeBar_V3.SLDPRT2009-01-27 13:59 5  
[ ]~$Door_Handle.SLDPRT2009-01-27 13:59 5  
[ ]~$E-CAGE-1.sldasm2009-01-27 13:59 5  
[ ]~$E-Cage-1.SLDPRT2009-01-27 13:59 5  
[ ]~$E-Cage-2.SLDPRT2009-01-27 13:59 5  
[ ]~$ElevCage-1.sldasm2009-01-27 13:59 5  
[ ]~$EndCap-Plug.sldprt2009-01-27 13:59 5  
[ ]~$Fillister Head Screws (U.S.).sldprt2009-01-27 13:59 5  
[ ]~$Generator Support Bushing.SLDPRT2009-01-20 09:17 5  
[ ]~$Ground Strap.SLDPRT2009-01-27 13:59 5  
[ ]~$Ladder.SLDPRT2009-01-27 13:59 5  
[ ]~$Large.Hor.Tubes-short.SLDPRT2009-01-27 13:59 5  
[ ]~$Large Support Base Ring.SLDDRW2010-10-25 12:01 5  
[ ]~$Large Support Base Ring.SLDPRT2010-10-25 12:01 5  
[ ]~$Lead.SLDPRT2009-01-27 13:59 5  
[ ]~$Leg Gussett.SLDPRT2009-01-27 13:59 5  
[ ]~$Load Dump Bridle Bar Mount.sldprt2009-01-27 13:59 5  
[ ]~$LoadDump_Assem.sldasm2009-01-27 13:59 5  
[ ]~$Long_Panel_Assem_V3.sldasm2009-01-27 13:59 5  
[ ]~$Moos-NMC_Can.mount plate.sldprt2009-01-27 13:59 5  
[ ]~$Moos-PWR_Can.mount plate.SLDPRT2009-01-27 13:59 5  
[ ]~$Moos elevator rod.sldprt2009-01-27 13:59 5  
[ ]~$New-Door_Frame_LatchBar.SLDPRT2009-01-27 13:59 5  
[ ]~$PanelTrim.SLDPRT2009-01-27 13:59 5  
[ ]~$SeaCon_AllWet_AWM-8XP-BC.sldprt2009-01-27 13:59 5  
[ ]~$Seal_Sleeve.sldprt2009-01-27 13:59 5  
[ ]~$Siemans_ SolarMod-SP150.sldprt2009-01-27 13:59 5  
[ ]~$Small.Hor.Tubes-short.SLDPRT2009-01-27 13:59 5  
[ ]~$Small Support Base Ring.SLDPRT2010-10-25 12:01 5  
[ ]~$Socket Head Cap Screws (U.S.).sldprt2008-11-25 10:00 5  
[ ]~$SuperWind 350 Blade.SLDPRT2009-01-22 16:21 5  
[ ]~$SuperWind 350 Rudder.SLDPRT2009-01-23 14:15 5  
[ ]~$Superwind 350 Generator Assy.SLDASM2009-01-23 09:52 5  
[ ]~$Tapered Female Bushing.SLDPRT2009-01-22 14:12 5  
[ ]~$TeklamPanelAssem.sldasm2009-01-27 13:59 5  
[ ]~$TeklamPanel_EdgeSeal.sldprt2009-01-27 13:59 5  
[ ]~$Teklam_HoneyComb-Plate.sldprt2009-01-27 13:59 5  
[ ]~$Temp-Assem.SLDASM2009-01-15 08:41 5  
[ ]~$UHMW-Clamp-1.sldprt2009-01-27 13:59 5  
[ ]~$WindBird-Mast.sldprt2009-10-08 15:31 5  
[ ]~$WindGenMount_Assem.SLDASM2009-01-27 13:59 5  
[ ]~$WindGenMount_Frame.sldprt2009-01-27 13:59 5  
[ ]~$WindGenMount_Socket.sldprt2009-01-27 13:59 5  
[ ]~$X-Pin_Bushing.SLDPRT2009-01-27 13:59 5  
[ ]~$X-Pin_Nut.SLDPRT2009-01-27 13:59 5  
[ ]~$Zinc_SeaSheald.SLDPRT2009-01-27 13:59 5  
[ ]~$antenna tubes.SLDPRT2009-01-27 13:59 5  
[ ]~$ballast tube.SLDPRT2009-01-27 13:59 5  
[ ]~$base gussets_Assem.sldprt2009-01-27 13:59 5  
[ ]~$bead3.sldprt2009-01-26 17:20 5  
[ ]~$bead4.sldprt2009-01-26 17:22 5  
[ ]~$bead5.sldprt2009-01-26 17:23 5  
[ ]~$bead7.sldprt2009-01-26 17:24 5  
[ ]~$bead8.sldprt2009-01-26 17:25 5  
[ ]~$buoy_clamp_V2.sldasm2009-01-27 13:58 5  
[ ]~$buoy_plate_Bottom.SLDPRT2009-01-27 13:59 5  
[ ]~$buoy_plate_TopDeck_V2.SLDPRT2009-01-27 13:59 5  
[ ]~$elevator assembley.sldasm2009-01-27 13:59 5  
[ ]~$elevator cage lift tab.sldprt2009-01-27 13:59 5  
[ ]~$elevator rod stationary mount plate.sldprt2009-01-27 13:59 5  
[ ]~$elevator support tube.sldprt2009-01-27 13:59 5  
[ ]~$elevator support tube_2.SLDPRT2009-01-27 13:59 5  
[ ]~$elev rod adjusting mount.SLDPRT2009-01-27 13:59 5  
[ ]~$elev rod locator.SLDPRT2009-01-27 13:59 5  
[ ]~$elev rod tabs.sldprt2009-01-27 13:59 5  
[ ]~$elev rod upper isolator bushing.sldprt2009-01-27 13:59 5  
[ ]~$hand rail.sldprt2009-01-27 13:59 5  
[ ]~$long elev rod sleeve.sldprt2009-01-27 13:59 5  
[ ]~$mid deck.sldprt2009-01-27 13:59 5  
[ ]~$rod sleeve lock ring.sldprt2009-01-27 13:59 5  
[ ]~$side tubes.sldprt2009-01-27 13:59 5  
[ ]~$tabs.sldprt2009-01-27 13:59 5  
[ ]~$top deck.sldprt2009-01-27 13:56 5  
[ ]~$top deck mount tabs.SLDPRT2009-01-27 13:59 5  
[ ]~$top ring.sldprt2009-01-27 13:59 5  
[ ]~$top ring gussets.SLDPRT2009-01-27 13:59 5  
[ ]~$top ring support tube.SLDPRT2009-01-27 13:59 5  
[ ]~$top tubes.sldprt2009-01-27 13:59 5  
[ ]~$tower assem_V3.sldasm2009-01-27 13:59 5  
[ ]~$tower leg.sldprt2009-01-27 13:59 5  
[ ]~$tower leg big.SLDPRT2009-01-27 13:59 5  
[ ]~$tower mounting tab.SLDPRT2009-01-27 13:59 5  
[ ]~$wind_bird.sldprt2009-10-08 15:31 5  
[ ]~$wind gen.SLDPRT2009-10-08 15:30 5  
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80