deploy?
Deployment Commands:
RE ----------------------- Recorder ErAsE
RN ----------------------- Set Deployment Name

WD = 111 100 000 --------- Data Out (Vel,Cor,Amp; PG,St,P0; P1,P2,P3)
WF = 0704 ---------------- Blank After Transmit (cm)
WN = 060 ----------------- Number of depth cells (1-128)
WP = 00180 --------------- Pings per Ensemble (0-16384)
WS = 0800 ---------------- Depth Cell Size (cm)
WV = 170 ----------------- Mode 1 Ambiguity Vel (cm/s radial)

TE = 01:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100)
TF = 03/03/04,17:10:00 --- Time of First Ping (yr/mon/day,hour:min:sec)
TP = 00:01.00 ------------ Time per Ping (min:sec.sec/100)
TS = 03/03/04,17:01:13 --- Time Set (yr/mon/day,hour:min:sec)

EA = +00000 -------------- Heading Alignment (1/100 deg)
EB = +01530 -------------- Heading Bias (1/100 deg)
ED = 00018 --------------- Transducer Depth (0 - 65535 dm)
ES = 34 ------------------ Salinity (0-40 pp thousand)
EX = 11010 --------------- Coord Transform (Xform: Type,Tilts,3 Bm,Map)
EZ = 1111101 ------------- Sensor Source (C,D,H,P,R,S,T)

Press any key to continue
CF = 11111 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)
CK ----------------------- Keep Parameters as USER Defaults
CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY)
CS ----------------------- Start Deployment

>system?
System Control, Data Recovery and Testing Commands:
AC ----------------------- Output Active Fluxgate & Tilt Calibration data
AF ----------------------- Field calibrate to remove hard/soft iron error
AR ----------------------- Restore factory fluxgate calibration data
AX ----------------------- Examine compass performance
AZ ----------------------- Zero pressure reading

CB = 411 ----------------- Serial Port Control (Baud; Par; Stop)
CP # --------------------- Polled Mode (0 = NORMAL, 1 = POLLED)
CZ  ---------------------- Power Down Instrument

FC ----------------------- Clear Fault Log
FD ----------------------- Display Fault Log

OL ----------------------- Display Features List

PA ----------------------- Pre-Deployment Tests
PC1 ---------------------- Beam Continuity
PC2 ---------------------- Sensor Data
PS0 ---------------------- System Configuration
PS3 ---------------------- Transformation Matrices

RR ----------------------- Recorder Directory
Press any key to continue
RF ----------------------- Recorder Space used/free (bytes)
RY ----------------------- Upload Recorder Files to Host

>wb?
WB = 1 ------------------- Bandwidth Control (0=Wid,1=Nar)
>cq?
CQ = 255 ----------------- Xmt Power (0=Low, 255=High)
>cs