daphne Path

trajectory

20190504T113517 [CommandLine]:got command restart logs

20190504T113655 [Default:CheckIn:E]:Default mission has been running for 9.998486 min

20190504T113658 [DVL_micro]:only read 44 of 46 data items

20190504T113728 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190504T113728 [CBIT]:Data Fault in component: NAL9602

20190504T113955 [CommandLine]:got command load ./Missions/Engineering/portuguese_ledge.xml

20190504T113956 [CommandLine]:Loaded ./Missions/Engineering/portuguese_ledge.xml

20190504T114008 [CommandLine]:got command set portuguese_ledge.MissionTimeout 8.000000 hour

20190504T114008 [CommandLine]:got command set portuguese_ledge.NeedCommsTime 45.000000 minute

20190504T114008 [CommandLine]:got command set portuguese_ledge.Repeat 20.000000 count

20190504T114008 [CommandLine]:got command set portuguese_ledge:NeedComms.CommsTimeout 15.000000 minute

20190504T114008 [CommandLine]:got command run

20190504T114008 [CommandLine]:Running

20190504T114009 [MissionManager]:Started mission portuguese_ledge

20190504T114011 [DVL_micro]:only read 45 of 46 data items

20190504T114012 [CTD_Seabird]:Failed to parse device response: #

20190504T114016 [DVL_micro]:only read 4 of 46 data items

20190504T114025 [DVL_micro]:checksum mismatch: reported79 , calculated:65

20190504T114037 [DVL_micro]:checksum mismatch: reported83 , calculated:84

20190504T114056 [DVL_micro]:checksum mismatch: reported91 , calculated:80

20190504T114141 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20190504T114204 [DVL_micro]:No DVL communication! Re-initializing

20190504T114204 [DVL_micro]:Communications Fault

20190504T114204 [CBIT]:Communications Fault in component: DVL_micro

20190504T114407 [DVL_micro]:No DVL communication! Re-initializing

20190504T114407 [DVL_micro]:Communications Fault

20190504T114407 [CBIT]:Communications Fault in component: DVL_micro

20190504T114447 [portuguese_ledge:Transit:Lap:Wpt1:A.Waypoint]:Reached Waypoint: 36.695944,-121.945120

20190504T114510 [CTD_NeilBrown]:Failed to match checksum. Expected: 255 got: 0

20190504T114510 [CTD_NeilBrown]:Bad response: *01##

20190504T114526 [DVL_micro]:No DVL communication! Re-initializing

20190504T114526 [DVL_micro]:Communications Fault

20190504T114526 [CBIT]:Communications Fault in component: DVL_micro

20190504T114811 [BPC1]:Failed to receive data from 4 sticks prior to timeout. Missing stick IDs are: 40, 41, 42, 43.

20190504T114811 [CBIT]:Data Fault in component: BPC1

20190504T115313 [CTD_NeilBrown]:Failed to match checksum. Expected: 4 got: 24

20190504T115320 [CTD_NeilBrown]:Failed to match checksum. Expected: 9 got: 30

20190504T115505 [CTD_NeilBrown]:Bad response: *07##

20190504T115506 [CTD_Seabird]:Failed to parse device response: .00#

20190504T115642 [portuguese_ledge:Transit:Lap:Wpt2:A.Waypoint]:Reached Waypoint: 36.696536,-121.937544

20190504T120311 [CTD_Seabird]:Failed to parse device response: 49.0732,0.00#

20190504T120353 [portuguese_ledge:Transit:Lap:Wpt3:A.Waypoint]:Reached Waypoint: 36.693760,-121.938647

20190504T121518 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20190504T121828 [ThrusterServo]:Invalid EZ Servo response:"/0@5242#"

20190504T121828 [ThrusterServo]:Communications Fault

20190504T121828 [CBIT]:Communications Fault in component: ThrusterServo

20190504T122459 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190504T122459 [CTD_Seabird]:Salinity reading out of range: 24.312965 psu

20190504T122650 [CTD_Seabird]:Failed to parse device response: 0.23,13.935900#

20190504T122912 [BPC1]:Failed to receive data from 4 sticks prior to timeout. Missing stick IDs are: 40, 41, 42, 43.

20190504T122912 [CBIT]:Data Fault in component: BPC1

20190504T123002 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190504T123027 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190504T123443 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190504T125236 [CTD_NeilBrown]:Bad response: 323

20190504T125619 [CTD_NeilBrown]:Bad response: *0F##

20190504T130914 [CTD_NeilBrown]:Bad response: *02##

20190504T131014 [BPC1]:Failed to receive data from 2 sticks prior to timeout. Missing stick IDs are: 41, 43.

20190504T131014 [CBIT]:Data Fault in component: BPC1

20190504T131355 [CTD_NeilBrown]:Bad response: 10.71

20190504T131355 [ThrusterServo]:Invalid EZ Servo response:"#"

20190504T131355 [ThrusterServo]:Communications Fault

20190504T131355 [CBIT]:Communications Fault in component: ThrusterServo

20190504T131426 [CTD_NeilBrown]:Salinity reading out of range: 25.053499 psu

20190504T131428 [CTD_Seabird]:Salinity reading out of range: 13.062314 psu

20190504T131458 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190504T131458 [CBIT]:Data Fault in component: NAL9602

20190504T131459 [NAL9602]:LCB fault: Software Overcurrent.

20190504T131643 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190504T133121 [CTD_Seabird]:Failed to parse device response: 8,3.77159,0.00#

20190504T133738 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20190504T135010 [CTD_NeilBrown]:Bad response: *0E##

20190504T135011 [CTD_Seabird]:Failed to parse device response: .00#

20190504T135116 [BPC1]:Failed to receive data from 2 sticks prior to timeout. Missing stick IDs are: 41, 43.

20190504T140318 [CTD_NeilBrown]:Salinity reading out of range: 6.468200 psu

20190504T140318 [CTD_NeilBrown]:Salinity reading out of range: 19.647499 psu

20190504T140322 [CTD_Seabird]:Salinity reading out of range: 10.134930 psu

20190504T140843 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20190504T143218 [BPC1]:Failed to receive data from 2 sticks prior to timeout. Missing stick IDs are: 41, 43.

20190504T144945 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20190504T145426 [CBIT]:Beginning ground fault scan

20190504T150909 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20190504T150936 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20190504T152427 [CTD_Seabird]:Failed to parse device response: #48.82,10.950.00#

20190504T154605 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190504T155421 [BPC1]:Failed to receive data from 1 sticks prior to timeout. Missing stick IDs are: 43.

20190504T161142 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20190504T163237 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190504T163237 [CBIT]:Data Fault in component: NAL9602

20190504T163523 [BPC1]:Failed to receive data from 1 sticks prior to timeout. Missing stick IDs are: 43.

20190504T163524 [MissionManager]:Started mission Default

20190504T163524 [WetLabsBB2FL]:LCB fault: LCB Watchdog Reset. Invalid Command.

20190504T163524 [WetLabsBB2FL]:Hardware Fault

20190504T163525 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20190504T163525 [Aanderaa_O2]:LCB fault: Hardware Overcurrent Shutdown.

20190504T163525 [Aanderaa_O2]:Hardware Fault

20190504T163525 [CBIT]:Hardware Fault in component: Aanderaa_O2

20190504T164417 [Default:CheckIn:E]:Default mission has been running for 8.875665 min

20190504T164435 [CommandLine]:got command get BPC1.batteryMissingStickThreshold

20190504T164435 [CommandLine]:BPC1.batteryMissingStickThreshold 4 count

20190504T164631 [CommandLine]:got command configSet BPC1.batterySamplingInterval 12.000000 hour persist

20190504T164807 [CommandLine]:got command restart application