Arial
Times New Roman
Wingdings
Monotype Sorts
Symbol
HP 2500C Series Printer
winspool
LPT1:
Dimensions
Vertical dimension line with variable dimension line height & text positions.
itions.
Vis_TMH.chm!#24767 `7Copyright 2000 Visio Corporation. All rights reserved.
`.0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
`"Linear Precision Formatting String
`#0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Change Dimension Height
Reposition Text
Precision && Units... `?Choose unit and precision settings for the displayed dimension. Prop.LPrec.Invisible
Set As Page Default `HSet this shape's precision and unit options as the default for the page. ThePage!User.LPrec Prop.LPrec User.LPrecVal ThePage!User.LUnits Prop.LUnits User.LUnitsVal ThePage!User.ShowUnits Prop.ShowUnits User.ShowUnitsVal
Revert To Page Default `SSet this shape so that it uses the default precision and unit settings of the page. Prop.LPrec User.LPrecVal Prop.LUnits User.LUnitsVal Prop.ShowUnits User.ShowUnitsVal
_Reset Text Position `-Move dimension text to it's default location. Controls.X2 Scratch.X1 Controls.Y2 Height
Extension Lines... `)Choose which extension lines are visible. Prop.LPrec.Invisible
`1Choose the displayed precision for the dimension. Precision
`#Choose the units for the dimension. Units Use Drawing Page's Units;.Feet-Inch (1'-0"");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
`4Choose whether or not to display unit abbreviations. Units Display Don't Show Units;Show Units
Both `)Choose which extension lines are visible. Extension Lines ` Both;End only;Begin only;Neither
Q(-DT `8Choose the angle at which the dimension line is rotated. Q(-DT
0.00
1.00
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
Use Drawing Page's Units
Don't Show Units
esc(0)
Ask On Drop `8To display the custom properties of the shape upon drop. TRUE
"
Hexagonal head shoulder screw with adjustable shoulder and thread sizes.
?xwwwww
Vis_TME.chm!#25939 `7Copyright 2000 Visio Corporation. All rights reserved.
Thread Length
?Affffff Shoulder Size
User.Siz Prop.D Prop.Len Prop.TdLen Prop.SDiam Height User.D Width User.Len Controls.X1 User.TdLen Controls.Y2 User.SDiam Set Dimensions... `"Input individual shape dimensions.
_Resize With Handles Use shape handles to resize. User.Siz Prop.D Height Prop.Len Width Prop.TdLen Controls.X1 Prop.SDiam Controls.Y2
_Show Hidden Detail _Hide Hidden Detail `$Show or hide hidden detail in shape. User.Detail
Input thread diameter. Diameter
Input bolt shaft length. Length
Input threaded length. Threaded Length
Affffff AffffffÒ Input shoulder diameter. Shoulder Diameter
Min. bolt length
Thread length
Anti-scaling formula.
Controls.X1 Controls.X1 `1Limit rangle of movement of first control handle.
Custom threaded diameter.
Affffff Custom shoulder diameter.
1/2 shoulder Diameter
Controls.Y2 Controls.Y2 `2Limit rangle of movement of second control handle.
`!Show or hide shape hidden detail.
Custom bolt length.
Custom threaded length.
In Actions[2] cell.
width height
Text block control handle.
Choose resizing mode.
_Resize With Handles
_Hide Hidden Detail
`7Copyright 2000 Visio Corporation. All rights reserved.
Thrust ball bearing.
ing.
Vis_TME.chm!#26016 `7Copyright 2000 Visio Corporation. All rights reserved.
`$Enter the bore size for the bearing. Bore
`0Enter the outside diameter size for the bearing. Outside Diameter
Enter the width of the bearing. Width
`(Enter the fillet radius for the bearing. Fillet Radius
Outside Diameter
Controls.Y1
Set Dimensions... `5Input specific dimensions for the bearing's features. User.SizeByNum Prop.Bore Height Prop.Bore Prop.Width Width Prop.Width Prop.OD Controls.Y1 (Height-Prop.OD)/2
_Resize With Handles `?Control the size of the bearing's features by dragging handles. User.SizeByNum Prop.Bore Height Prop.Width Width Prop.OD Height-2*Controls.Y1 Controls.Y1
Undercut for shaft with variable fillet radius.
Vis_TME.chm!#26029 `7Copyright 2000 Visio Corporation. All rights reserved.
controls.x1 Controls.x1
`!Input fillet radius for undercut. Fillet Radius
Resize Undercut
Set Fillet Radius... `!Input fillet radius for undercut.
Rectangle with connection points and text that stays level when shape is rotated.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24811
Perpendicular lines with adjustable line lengths. Right-click to show/hide right angle box.
box.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24804
Resize Leg
Actions.Action Hide Right Angle Box Show Right Angle Box Show or hide right angle box.
Show Right Angle Box
Simple pneumatic or hydraulic pump/motor.
ional flow and rotation directions, displacement, and controls.
trols.
Vis_TFP.chm!#26089 `7Copyright 2000 Visio Corporation. All rights reserved.
Slide Pump/Motor
controls.x1 controls.x1
EndX
Pneumatic Hydraulic `$Select pneumatic or hydraulic fluid. Actions.Action
_Pump Select pump. User.Type
Motor Select motor. User.Type
Pump-motor Select pump-motor. User.Type
_Unidirectional _Bidirectional `!Select unidirectional pump/motor. ` Select bidirectional pump/motor. Actions.Action[5]
_Variable _Non-variable Select variable displacement. `!Select non-variable displacement. Actions.Action[6]
_Compensated _Non-compensated Select pressure compensated. ` Select non-pressure compensated. Actions.Action[7]
Pneumatic
_Variable
Select variable displacement.
_Compensated
Select pressure compensated.
_Bidirectional
Select bidirectional pump/motor.
Qps-8R
Q(-DT
1
Set Angle... `)Set variable arrow angle with centerline.
`%Input angle of arrow with centerline. Angle (degrees)
Pneumatic or hydraulic pump/motor with optional flow and rotation directions, displacement, and controls.
Vis_TFP.chm!#26091 `7Copyright 2000 Visio Corporation. All rights reserved.
_Set Pump/Motor Properties... `dSelect options of displacement type, direction of flow and rotation, and variable control mechanism.
Slide Pump/Motor 1
Fixed Select displacement type. Displacement Fixed;Variable
Both Directions `!Select number of flow directions. Flow Directions One Direction;Both Directions
Both Directions `%Select number of rotation directions. Rotation Directions One Direction;Both Directions
Select drain (external). Drain (external) Yes;No
None Select control mechanism. Control Mechanism `aNone;Manual Override;Solenoid (1);Solenoid (2);Variable Solenoid (1);Variable Solenoid (2);Roller
Proportional Non-proportional Toggle variability arrow. Actions.action
_One Winding _Two Windings Toggle number of windings. Actions.action[2]
Non-proportional
_Two Windings
Pressurized or sealed hydraulic reservoir.
onal flow and rotation directions, displacement, and controls.
Vis_TFP.chm!#26108 `7Copyright 2000 Visio Corporation. All rights reserved.
Notations
Text block with 12pt. Apply line style to make border.
o make border.
e to make border.
Vis_TMH.chm!#24705 `7Copyright 2000 Visio Corporation. All rights reserved.
Automatically reads out the scale of the page.
Vis_TMH.chm!#24724 `7Copyright 2000 Visio Corporation. All rights reserved.
Architectural: `1Choose the display style for the drawing's scale. User.ScaleType
Civil: 1in = User.ScaleType
Mechanical: User.ScaleType
Metric: User.ScaleType
12/1"
1'-0"
12"
1in
Mechanical: 1 : 1
:
Architectural: 12" = 1' - 0"
Civil: 1in = 1in
Metric: 1 : 1
Choose the display style for the drawing's scale.
`&Show or hide all the tags on the page.
Plate type heat exchanger.
is used in PID drawings.
Vis_TPE.chm!#26683 `7Copyright 2000 Visio Corporation. All rights reserved.
Glue handle to another shape to form an Association
`/Determines if the tag should be shown or hidden
`/Set when an automatic label shows pipeline tag.
`)Determines text control handle visibility
`$Command executed by right mouse menu
`(Row number of Association control handle
`%Association status of shape - CHI Tip
Is shape currently selected
`&Determines Association line visibility
Edit Datasheet `)Display datasheet for the selected shape. User._Action
Edit Tag Number... `4Displays Edit Tag dialog for changing the shape tag. User._Action
Show Association Line `?Makes Association line visible even when shape is not selected. User._ShowAssocLine
Hide Tag `#Show / Hide the tag for this shape. User._HideTag
Glue handle to another shape to form an Association;Drag handle off of shape to remove Association;Drag shape off of pipeline to remove Association Error: Unknown Association code
PID6 Heat Exchanger
Box callout with adjustable box size. Drag endpoints to aim callout.
eight.
o identify component.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24704
Resize Width
Resize Height
Rectangle defined by its diagonal size.
f diagonally defined rectangle.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24809
Text block with 8pt. Apply line style to make border.
make border.
Vis_TMH.chm!#24706 `7Copyright 2000 Visio Corporation. All rights reserved.
Double row cylindrical roller bearing.
Vis_TME.chm!#26018 `7Copyright 2000 Visio Corporation. All rights reserved.
C:\Program Files\Visio\Solutions\Annotation\Annotations.vss
C:\Program Files\Visio\Solutions\Annotation\Dimensioning - Engineering.vss
C:\Program Files\Visio\Solutions\Annotation\Drawing Tool Shapes.vss
C:\Program Files\Visio\Solutions\Process Engineering\Equipment - Heat Exchangers.vss
C:\Program Files\Visio\Solutions\Mechanical Engineering\Fasteners 1.vss
C:\Program Files\Visio\Solutions\Mechanical Engineering\Fasteners 2.vss
C:\Program Files\Visio\Solutions\Fluid Power\Fluid Power - Equipment.VSS
C:\Program Files\Visio\Solutions\Mechanical Engineering\Geometric Dimensioning and Tolerancing.vss
C:\Program Files\Visio\Solutions\Mechanical Engineering\Springs and Bearings.vss
C:\Program Files\Visio\Solutions\Annotation\Title Blocks.vss
C:\Program Files\Visio\Solutions\Mechanical Engineering\Welding Symbols.vss
TRUE `8To display the custom properties of the shape upon drop. Ask On Drop
` UUUUUU
Page-1
Black fill
White fill
Blue fill
Red fill
Green fill
Cyan fill
Yellow fill
Magenta fill
Gray fill
10% Gray fill
White line
30% Gray fill
Long dashed line
Blue dark fill
Cyan dark fill
Green dark fill
Magenta dark fill
Red dark fill
Yellow dark fill
50% Gray fill
70% Gray fill
90% Gray fill
1pxl line
3pxl line
9pxl line
Hairline
Short dashed line
Arial centered
Arial top left
Arial top
Times centered
Times top
Times top left
Guide
Gesture Format
Dimension
Vertical
LPrec
LUnits
ShowUnits
AntiScale
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
Extensions
Angle
Fastener
Threads
Hidden detail
Hex shoulder
AskOnDrop
TdLen
SDiam
MinLen
TLen
CH1Limit
Shoulder
CH2Limit
Detail
SetOnDrop
Bearing
Hatch 1
Hatch 2
Thrust
Bore
Width
FilletR
SizeByNum
RingHeight
LimitCH
LimitCHSize
Undercut
Fillet
CHLimit
Diameter
Rectangle
Perpendicular lines
Fluid power
Fluid flow
Pump/motor (simple)
Type
Disp
Comp
Dirn
Flow
Check
Hght
Factor
Pilot control
Pump/ motor 1
Control
Rotate
Drain
SQR1
Motor
Variable
Windings
Sealed reservoir
12pt. text
AutoWidth
WidthIncrement
Drawing scale
ScaleType
PageScale
DrawingScale
ArchLeft
CivERight
MetricLeft
MetricRight
MELeft
Process Flow
Plate type
_HideTag
_TagShownInLabel
_TextCH
_Action
_AssocRow
_AssocStatus
_ShapeSelected
_ShowAssocLine
Row_1
Row_2
Row_3
Row_4
Row_5
Row_6
Association
Callout
Box callout
Diagonal rectangle
8pt. text
Cylindrical roller (dbl.)