[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    MCA
    ISA
    EISA
    PCI
    PCMCIA
    "Jazz-Internal Bus"
[Options]
    MSMDGMPISA
    MSMDGMPATP
    MSMDGMPISAC
    MSMDGMPISACP
    MSMDGMPPC
    MSMDGMPSM16
    MSMDGMPPNP
    MSMDGMPMCA
    MSMDGMPMC32
    MSMDGMPEISA
    MSMDGMPPCI
    MSMDGMPPCIBM
    MSMDGMPPCMCIA
[OptionsISA]
    MSMDGMPISA
    MSMDGMPATP
    MSMDGMPISAC
    MSMDGMPISACP
    MSMDGMPPC
    MSMDGMPSM16
    MSMDGMPPNP
[OptionsMCA]
    MSMDGMPMCA
    MSMDGMPMC32
[OptionsEISA]
    MSMDGMPEISA
    MSMDGMPISA
    MSMDGMPATP
    MSMDGMPISAC
    MSMDGMPISACP
    MSMDGMPPC
    MSMDGMPSM16
    MSMDGMPPNP
[OptionsPCI]
    MSMDGMPPCI
    MSMDGMPPCIBM
[OptionsPCMCIA]
    MSMDGMPPCMCIA
[SlotNumberOnlyOptions]
    MSMDGMPEISA
    MSMDGMPMCA
    MSMDGMPMC32
    MSMDGMPPCI
    MSMDGMPPCIBM
[MmioOptions]
    MSMDGMPPCI
[FileConstants]
DialogDllName = "MDGMPDLG.DLL"
SoftwareType  = "driver"
Exit_Code     = 0
Manufacturer        = "Madge"
ProductMajorVersion = "4"
ProductMinorVersion = "0"
ProductRevision     = ".00"
ProductVersion      = $(ProductMajorVersion)"."$(ProductMinorVersion)$(ProductRevision)
ProductSoftwareName     = "MadgeMPort"
ProductSoftwareImagePath = "%SystemRoot%\system32\drivers\MdgMPort.sys"
NetRuleSoftwareType     = "mdgtrSys ndisDriver mdgtrDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """mdgtrSys"" yes no container"
NetRuleSoftwareClass    = {"mdgtrDriver basic"}
NetRuleSoftwareBindable = {"mdgtrDriver mdgtrAdapter non exclusive 100"}
ProductHardwareName         = "MadgeMPort"
NetRuleHardwareType         = "mdgtr mdgtrAdapter"
NetRuleHardwareBindForm     = " yes yes container"
NetRuleHardwareClass        = {"mdgtrAdapter basic"}
ProductOpSupport     = 134 
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
MadgeEventLogFile = $(ProductSoftwareImagePath)
[GeneralConstants]
UtilityInf    = "UTILITY.INF"
SubroutineInf = "SUBROUTN.INF"
ParamInf      = "NCPARAM.INF"
From      = ""
To        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
MAXIMUM_ALLOWED    = 33554432
RegistryErrorIndex = NO_ERROR
KeyNull            = ""
KeyProduct         = ""
KeyParameters      = ""
TRUE    = 1
FALSE   = 0
NoTitle = 0
ExitState         = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
VALUE_UNKNOWN   = 65535
GENERAL_PIO     = 0
GENERAL_DMA     = 500
GENERAL_MMIO    = 501
TRANSFER_UNKNOWN = 65535
TRANSFER_PIO     = 0
TRANSFER_DMA     = 1
TRANSFER_MMIO    = 2
IoUserList    = ^(IoLocationChoices, 1)
IoRawList     = ^(IoLocationChoices, 2)
SlotUserList  = ^(SlotNumberChoices, 1)
SlotRawList   = ^(SlotNumberChoices, 2)
DmaUserList   = ^(DmaChannelChoices, 1)
DmaRawList    = ^(DmaChannelChoices, 2)
IrqUserList   = ^(IrqNumberChoices, 1)
IrqRawList    = ^(IrqNumberChoices, 2)
RxTxUserList  = ^(RxTxSlotsChoices,1)
RxTxRawList   = ^(RxTxSlotsChoices,2)
StatsUserList = ^(StatsChoices,1)
StatsRawList  = ^(StatsChoices,2)
MpUserList    = ^(MpChoices,1)
MpRawList     = ^(MpChoices,2)
MadgeAdapterOptions  = ^(Options,1)
SlotNumberAdapters   = ^(SlotNumberOnlyOptions,1)
MmioAdapters         = ^(MmioOptions,1)
MadgeHelpIdMin         = 6000
MadgeHelpIdMax         = 6003
MadgeHelpIdMDGMPISA    = 6001
MadgeHelpIdMDGMPATP    = 6001
MadgeHelpIdMDGMPISAC   = 6001
MadgeHelpIdMDGMPISACP  = 6001
MadgeHelpIdMDGMPPC     = 6001
MadgeHelpIdMDGMPSM16   = 6001
MadgeHelpIdMDGMPPNP    = 6001
MadgeHelpIdMDGMPPCMCIA = 6001
MadgeHelpIdMDGMPEISA   = 6002
MadgeHelpIdMDGMPMCA    = 6002
MadgeHelpIdMDGMPMC32   = 6002
MadgeHelpIdMDGMPPCI    = 6003
MadgeHelpIdMDGMPPCIBM  = 6003
IDMSMDGMPPCI =   135350
IDVMSMDGMPPCI = AdapterCFID
IDMSMDGMPPCIBM =   266422 
IDVMSMDGMPPCIBM = AdapterCFID
IDMSMDGMPEISA =   34612
IDVMSMDGMPEISA = EisaCompressedId
IDMSMDGMPMCA =   45
IDVMSMDGMPMCA = McaPosId
IDMSMDGMPMC32 =   116
IDVMSMDGMPMC32 = McaPosId
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status         = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	    goto Return_Options
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	ifcontains(i) $($1) in $(PlatformList)
	    goto Return_Options
	else
	    set Status = STATUS_NOTSUPPORTED
	    goto Finish_ReturnOptions
	endif
    else
        set Status = STATUS_NOLANGUAGE
	goto Finish_ReturnOptions
    endif
Return_Options = +
    set OptionList     = ^(Options$($1), 1)
    set OptionTextList = ^(OptionsText$($1)$($0), 1)
    set Status         = STATUS_SUCCESSFUL
Finish_ReturnOptions = +
    return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    StartWait
    set Status = STATUS_FAILED
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    Debug-Output "MADGE: STF_CWDIR    = "$(!STF_CWDIR)
    Debug-Output "MADGE: STF_LANGUAGE = "$(!STF_LANGUAGE)
    Debug-Output "MADGE: Option       = "$(Option)
    Debug-Output "MADGE: SrcDir       = "$(SrcDir)
    Debug-Output "MADGE: AddCopy      = "$(AddCopy)
    Debug-Output "MADGE: DoCopy       = "$(DoCopy)
    Debug-Output "MADGE: DoConfig     = "$(DoConfig)
    set LanguageList = ^(LanguagesSupported, 1)
    ifcontains(i) $($0) NOT-IN $(LanguageList)
	return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    SetHelpFile "mdgmpdlg.hlp" $(MadgeHelpIdMin) $(MadgeHelpIdMax)
    detect date
    set-title $(FunctionTitle)
    set To   = Begin
    set From = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    set AdapterDetected     = FALSE
    set MappedRawParameters = FALSE
    ifstr(i) $(!NTN_InstallMode) == deinstall
    	set StartLabel = Remove_Adapter
    else-ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = Upgrade_Software
    else-ifstr(i) $(!NTN_InstallMode) == bind
    	set StartLabel = Binding_Adapter
    else-ifstr(i) $(!NTN_InstallMode) == configure
    	set CommonStatus = STATUS_REBOOT
    	set StartLabel = Configure_Adapter
    	ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
    	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
    	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    		    goto Shell_Code_Error
            endif
	        set Error = $($R0)
	        set From  = End
	        set To    = End
	        goto Non_Fatal_Info
    	endif
    else
	    set StartLabel           = Install_Adapter
	    set OEM_ABANDON_OPTIONS  = {}
	    set OEM_ABANDON_SOFTWARE = FALSE
	    set OEM_ABANDON_ON       = TRUE
    endif
    set From = Fatal
    set To   = Fatal
    goto $(StartLabel)
Install_Adapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	    CloseRegKey $(KeyProduct)
	    ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
	       Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	           $(ProductVersion)
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
	           goto Shell_Code_Error
	       endif
	       goto End
	    else
           ifstr(i) $(Option) != "MSMDGMPAUTO"
   	           Shell $(UtilityInf), CardExistedDlg
	           ifint $($ShellCode) != $(!SHELL_CODE_OK)
	               goto Shell_Code_Error
	           endif
	           ifstr(i) $($R1) != "OK"
	               goto End
	           endif
           endif
	       set OldVersionExisted = $(TRUE)
	    endif
    endif
Install_Files = +
    Debug-Output "OEMNADMA.INF: Install Files"
    ifint $(OldVersionExisted) == $(FALSE)
    	ifstr(i) $(!NTN_InstallMode) == "install"
	        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(!STF_SRCDIR), "YES"
	        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto Shell_Code_Error
	        else-ifstr(i) $($R0) == STATUS_FAILED
        		shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	            ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    	        goto Shell_Code_Error
	            endif
	            set Error = $($R0)
	            goto Fatal
    	    else-ifstr(i) $($R0) == STATUS_USERCANCEL
                goto Successful
            endif
	        set SrcDir = $($R1)   
	        install "Install-Option"
	        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
    		    shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	    	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto Shell_Code_Error
                endif
		        set Error = $($R0)
		        goto Fatal
	        endif
	    endif
    endif
    ifstr(i) $(!STF_NCDETECT) == YES
        ifstr(i) $(!STF_NCOPTION) == $(Option)
            set AdapterDetected = TRUE
            set DetectOption    = $(!STF_NCOPTION)
            set DetectIndex     = $(!STF_NCDETCARD)
            goto Set_Installation_Defaults
        endif
    endif
Set_Installation_Defaults = +
    Debug-Output "OEMNADMA.INF: Set Install Defaults"
    StartWait
    set MaxFrameSize  = 4096
    set LAA           = ""
    set RxTxSlots     = *($(RxTxRawList),3)
    set StatsFlag     = *($(StatsRawList),1)
    set SpeedFlag     = 0
    set OldIrqNumber  = $(VALUE_UNKNOWN)
    set OldDmaChannel = $(VALUE_UNKNOWN)
    set OldIoLocation = $(VALUE_UNKNOWN)
    set OldSlotNumber = $(VALUE_UNKNOWN)
    set OldMpFlag     = $(VALUE_UNKNOWN)
    ifcontains(i) $(Option) in $(SlotNumberAdapters)
        set TypeList = {{SLOTNUMBER,SlotList,SlotNumber},+
                        {DMACHANNEL,DmaList,DmaChannel},+
                        {MULTIPROCESSOR,MpList,MpFlag}}
    else
        set TypeList = {{IOLOCATION,IoList,IoLocation},+
                        {DMACHANNEL,DmaList,DmaChannel},+
                        {INTERRUPTNUMBER,IrqList,IrqNumber},+
                        {MULTIPROCESSOR,MpList,MpFlag}}
    endif
    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
    set Status = $($R0)
    ifstr(i) $(Status) != STATUS_SUCCESSFUL
        Debug-Output "OEMNADMA.INF: Param_BuildTypeLists returned "$(Status)
        goto Fatal
    endif
    ifstr(i) $(AdapterDetected) == TRUE
        Debug-Output "OEMNADMA.INF: Calling Param_QueryCard"
        Shell $(ParamInf) Param_QueryCard $(DetectIndex)
        set Status    = $($R0)
        set ParamList = $($R1)
        ifstr(i) $(Status) != STATUS_SUCCESSFUL
            goto Fatal
        endif
    endif
    Debug-Output "OEMNADMA.INF: Calling Param_SetDefaults"
    Shell $(ParamInf) Param_SetDefaults $(ParamList)
    Debug-Output "MADGE: SlotNumber = "$(SlotNumber)
    Debug-Output "MADGE: IoLocation = "$(IoLocation)
    Debug-Output "MADGE: IrqNumber  = "$(IrqNumber)
    Debug-Output "MADGE: DmaChannel = "$(DmaChannel)
    Debug-Output "MADGE: MpFlag     = "$(MpFlag)
    Debug-Output "MADGE: SlotList   = "$(SlotList)
    Debug-Output "MADGE: IoList     = "$(IoList)
    Debug-Output "MADGE: IrqList    = "$(IrqList)
    Debug-Output "MADGE: DmaList    = "$(DmaList)
    Debug-Output "MADGE: MpList     = "$(MpList)
    ifstr(i) $(AdapterDetected) == TRUE
        set OldSlotNumber = $(SlotNumber)
        set OldIoLocation = $(IoLocation)
        set OldIrqNumber  = $(IrqNumber)
        set OldDmaChannel = $(DmaChannel)
        set OldMpFlag     = $(MpFlag)
    endif
    set OldValueTitle = $(OldValueTitleInstall)
    EndWait
    goto Get_Adapter_Options
Configure_Adapter = +
    StartWait
    ifcontains(i) $(Option) in $(SlotNumberAdapters)
        set TypeList = {{SLOTNUMBER,SlotList,SlotNumber},+
                        {DMACHANNEL,DmaList,DmaChannel},+
                        {MULTIPROCESSOR,MpList,MpFlag}}
    else
        set TypeList = {{IOLOCATION,IoList,IoLocation},+
                        {DMACHANNEL,DmaList,DmaChannel},+
                        {INTERRUPTNUMBER,IrqList,IrqNumber},+
                        {MULTIPROCESSOR,MpList,MpFlag}}
    endif
    Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList)
    set Status = $($R0)
    ifstr(i) $(Status) != STATUS_SUCCESSFUL
        goto fataldetect
    endif
    Shell $(ParamInf) Param_SetDefaults $(ParamList)
    set MaxFrameSize = 4096
    set LAA          = ""
    set RxTxSlots    = *($(RxTxRawList),3)
    set StatsFlag    = *($(StatsRawList),1)
    set NoMmioFlag   = 0
    set SpeedFlag    = 0
    set TransferType = $(TRANSFER_UNKNOWN)
    ifstr $(KeyProduct) == $(KeyNull)
	    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	    ifstr $(KeyProduct) == $(KeyNull)
	        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	        goto Fatal_Registry
	    endif
    endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    	goto Shell_Code_Error
    endif
    ifstr(i) $($R0) != NO_ERROR
    	goto Fatal_Registry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    ifstr $(KeyParameters) == $(KeyNull)
    	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
    	goto Fatal_Registry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	    set ValueItem = $($)
	    set ValueName = *($(ValueItem),1)
	    set ValueData = *($(ValueItem),4)
	    ifstr(i) $(ValueName) == "InterruptNumber"
	        set IrqNumber = $(ValueData)
	    else-ifstr(i) $(ValueName) == "IoLocation"
	        set IoLocation = $(ValueData)
	    else-ifstr(i) $(ValueName) == "IoBaseAddress"
	        set IoLocation = $(ValueData)
	    else-ifstr(i) $(ValueName) == "DmaChannel"
	        set DmaChannel = $(ValueData)
	    else-ifstr(i) $(ValueName) == "SlotNumber"
	        set SlotNumber = $(ValueData)
	    else-ifstr(i) $(ValueName) == $(McaEisaKeyword)
	        set McaEisaId = $(ValueData)
	    else-ifstr(i) $(ValueName) == "MaxFrameSize"
	        set MaxFrameSize = $(ValueData)
	    else-ifstr(i) $(ValueName) == "NetworkAddress"
	        set LAA = $(ValueData)
        else-ifstr(i) $(ValueName) == "RxTxSlots"
            set RxTxSlots = $(ValueData)
        else-ifstr(i) $(ValueName) == "PromiscuousModeX"
            set StatsFlag = $(ValueData)
        else-ifstr(i) $(ValueName) == "Multiprocessor"
            set MpFlag = $(ValueData)
        else-ifstr(i) $(ValueName) == "NoMmio"
            set NoMmioFlag = $(ValueData)
        else-ifstr(i) $(ValueName) == "Force16"
            set SpeedFlag = 2
        else-ifstr(i) $(ValueName) == "Force4"
            set SpeedFlag = 1
        else-ifstr(i) $(ValueName) == "TransferType"
            set TransferType = $(ValueData)
	    endif
    EndForListDo
    ifint $(DmaChannel) == 32768
        set DmaChannel = $(GENERAL_PIO)
        set MpFlag     = 1
    endif
    ifcontains(i) $(GENERAL_MMIO) in $(DmaList)
        ifint $(NoMmioFlag) != 0
            set DmaChannel = $(GENERAL_PIO)
        else
            set DmaChannel = $(GENERAL_MMIO)
        endif
    endif
    ifint $(TransferType) == $(TRANSFER_PIO)
        ifcontains(i) $(GENERAL_PIO) in $(DmaList)
            set DmaChannel = $(GENERAL_PIO)
        endif
    endif
    ifint $(TransferType) == $(TRANSFER_DMA)
        ifcontains(i) $(GENERAL_DMA) in $(DmaList)
            set DmaChannel = $(GENERAL_DMA)
        endif
    endif
    set OldSlotNumber = $(SlotNumber)
    set OldIoLocation = $(IoLocation)
    set OldIrqNumber  = $(IrqNumber)
    set OldDmaChannel = $(DmaChannel)
    set OldMpFlag     = $(MpFlag)
    set OldValueTitle = $(OldValueTitleConfigure)
    EndWait
Get_Adapter_Options = +
    Debug-Output "OEMNADMA.INF: Get_Adapter_Options"
    StartWait
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        ifstr(i) $(!STF_NCDETINFO) == {}
            ifstr(i) $(!AutoNetInterfaceType) != ""
                set BusInterfaceType = $(!AutoNetInterfaceType)
            else
                set BusInterfaceType = 1    
            endif
            ifstr(i) $(!AutoNetBusNumber) != ""
                set BusNumber = $(!AutoNetBusNumber)
            else
                set BusNumber = 0
            endif
        else
            ifstr(i) $(!AutoNetInterfaceType) != ""
                set BusInterfaceType = $(!AutoNetInterfaceType)
            else
                set BusInterfaceType = *($(!STF_NCDETINFO),5)
            endif
            ifstr(i) $(!AutoNetBusNumber) != ""
                set BusNumber = $(!AutoNetBusNumber)
            else
                set BusNumber = *($(!STF_NCDETINFO),6)
            endif
        endif
        goto adapterverify
    endif
    set OldLAA       = $(LAA)
    set OldStatsFlag = $(StatsFlag)
    set OldSpeedFlag = $(SpeedFlag)
    set SpeedRawList  = $(SpeedRawList$(Option))
    set SpeedUserList = $(SpeedUserList$(Option))
    ifstr(i) $(MappedRawParameters) == FALSE
        ifcontains(i) $(Option) not-in $(SlotNumberAdapters)
            set TempList = $(IoList)
            set IoList   = {}
            ForListDo $(TempList)
                set IoList = >($(IoList), *($(IoUserList),~($(IoRawList),$($))))
            EndForListDo
            set TempList = $(IrqList)
            set IrqList  = {}
            ForListDo $(TempList)
                set IrqList = >($(IrqList), *($(IrqUserList),~($(IrqRawList),$($))))
            EndForListDo
        else
            set TempList = $(SlotList)
            set SlotList  = {}
            ForListDo $(TempList)
                set SlotList = >($(SlotList), *($(SlotUserList),~($(SlotRawList),$($))))
            EndForListDo
        endif
        set TempList = $(DmaList)
        set DmaList  = {}
        ForListDo $(TempList)
            set DmaList = >($(DmaList), *($(DmaUserList),~($(DmaRawList),$($))))
        EndForListDo
        set TempList = $(MpList)
        set MpList   = {}
        ForListDo $(TempList)
            set MpList = >($(MpList), *($(MpUserList),~($(MpRawList),$($))))
        EndForListDo
        set MappedRawParameters = TRUE
    endif
    EndWait
Get_Adapter_Options_Restart = +
    StartWait
    set From = Get_Adapter_Options_Restart
    ifcontains(i) $(Option) not-in $(SlotNumberAdapters)
        set IoLocation    = *($(IoUserList),~($(IoRawList),$(IoLocation)))
        set OldIoLocation = *($(IoUserList),~($(IoRawList),$(OldIoLocation)))
        set IrqNumber     = *($(IrqUserList),~($(IrqRawList),$(IrqNumber)))
        set OldIrqNumber  = *($(IrqUserList),~($(IrqRawList),$(OldIrqNumber)))
    else
        set SlotNumber    = *($(SlotUserList),~($(SlotRawList),$(SlotNumber)))
        set OldSlotNumber = *($(SlotUserList),~($(SlotRawList),$(OldSlotNumber)))
    endif
    set DmaChannel    = *($(DmaUserList),~($(DmaRawList),$(DmaChannel)))
    set OldDmaChannel = *($(DmaUserList),~($(DmaRawList),$(OldDmaChannel)))
    set MpFlag        = *($(MpUserList),~($(MpRawList),$(MpFlag)))
    set OldMpFlag     = *($(MpUserList),~($(MpRawList),$(OldMpFlag)))
    set StatsFlag     = *($(StatsUserList),~($(StatsRawList),$(StatsFlag)))
    set RxTxSlots     = *($(RxTxUserList),~($(RxTxRawList),$(RxTxSlots)))
    set SpeedFlag     = *($(SpeedUserList),~($(SpeedRawList),$(SpeedFlag)))
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    Debug-Output "MADGE: Option             = "$(Option)
    Debug-Output "MADGE: SlotNumberAdapters = "$(SlotNumberAdapters)
    ifcontains(i) $(Option) in $(SlotNumberAdapters)
	    set DlgTemplate = "MDGEISA"
    else
        set DlgTemplate = "MDGISA"
    endif
    Debug-Output "MADGE: DlgTemplate = "$(DlgTemplate)
    ifstr(i) $(Option) == "MSMDGMPPCI"
        set Combo8Label = $(PciCombo8Label)
    endif
    LoadLibrary "x" $(DialogDllName) MdgDialog
    EndWait
    ui start "InputDlg" $(MdgDialog)
    StartWait
    ifstr(i) $(DLGEVENT) == "EXIT"
	    set CommonStatus = STATUS_USERCANCEL
	    ui pop 1
	    FreeLibrary $(MdgDialog)
	    goto End
    else-ifstr(i) $(DLGEVENT) != "CONTINUE"
	    ui pop 1
	    FreeLibrary $(MdgDialog)
	    goto End
    endif
    set IrqNumber    = $(Combo1Out)
    set IoLocation   = $(Combo2Out)
    set DmaChannel   = $(Combo3Out)
    set RxTxSlots    = $(Combo4Out)
    set StatsFlag    = $(Combo5Out)
    set MpFlag       = $(Combo7Out)
    set SlotNumber   = $(Combo8Out)
    set SpeedFlag    = $(Combo9Out)
    set MaxFrameSize = *($(EditTextOut), 1)
    set LAA          = *($(EditTextOut), 2)
    ui pop 1
    FreeLibrary $(MdgDialog)
    Debug-Output "MADGE: SlotNumber = "$(SlotNumber)
    Debug-Output "MADGE: IoLocation = "$(IoLocation)
    Debug-Output "MADGE: IrqNumber  = "$(IrqNumber)
    Debug-Output "MADGE: DmaChannel = "$(DmaChannel)
    Debug-Output "MADGE: MpFlag     = "$(MpFlag)
    Debug-Output "MADGE: RxTxSlots  = "$(RxTxSlots)
    Debug-Output "MADGE: StatsFlag  = "$(StatsFlag)
    ifcontains(i) $(Option) not-in $(SlotNumberAdapters)
        set IoLocation    = *($(IoRawList),~($(IoUserList),$(IoLocation)))
        set OldIoLocation = *($(IoRawList),~($(IoUserList),$(OldIoLocation)))
        set IrqNumber     = *($(IrqRawList),~($(IrqUserList),$(IrqNumber)))
        set OldIrqNumber  = *($(IrqRawList),~($(IrqUserList),$(OldIrqNumber)))
    else
        set SlotNumber    = *($(SlotRawList),~($(SlotUserList),$(SlotNumber)))
        set OldSlotNumber = *($(SlotRawList),~($(SlotUserList),$(OldSlotNumber)))
    endif
    set DmaChannel    = *($(DmaRawList),~($(DmaUserList),$(DmaChannel)))
    set OldDmaChannel = *($(DmaRawList),~($(DmaUserList),$(OldDmaChannel)))
    set MpFlag        = *($(MpRawList),~($(MpUserList),$(MpFlag)))
    set OldMpFlag     = *($(MpRawList),~($(MpUserList),$(OldMpFlag)))
    set StatsFlag     = *($(StatsRawList),~($(StatsUserList),$(StatsFlag)))
    set RxTxSlots     = *($(RxTxRawList),~($(RxTxUserList),$(RxTxSlots)))
    set SpeedFlag     = *($(SpeedRawList),~($(SpeedUserList),$(SpeedFlag)))
    Debug-Output "MADGE: SlotNumber = "$(SlotNumber)
    Debug-Output "MADGE: IoLocation = "$(IoLocation)
    Debug-Output "MADGE: IrqNumber  = "$(IrqNumber)
    Debug-Output "MADGE: DmaChannel = "$(DmaChannel)
    Debug-Output "MADGE: MpFlag     = "$(MpFlag)
    Debug-Output "MADGE: RxTxSlots  = "$(RxTxSlots)
    Debug-Output "MADGE: StatsFlag  = "$(StatsFlag)
    EndWait
Adapter_Verify = +
    StartWait
    ifstr $(LAA) != ""
        LoadLibrary "x" $(DialogDllName) MdgDialog
	    set FLibraryErrCtl = 1
	    LibraryProcedure MdgResult $(MdgDialog) MadgeLAACheck $(LAA)
	    set FLibraryErrCtl = 0
        FreeLibrary $(MdgDialog)
    	ifstr $(MdgResult) != "MADGE_STATUS_SUCCESS"
	        set Error = $(MdgResult)
	        goto Non_Fatal 
	    endif
    endif
    ifint $(MaxFrameSize) > 17839
	    set MaxFrameSize = 17839
	    set Error        = $(TRIMMED_MFS)
	    set From         = Update_Registry
	    goto Non_Fatal_Info
    endif
    ifstr(i) $(!STF_NCDETINFO) == {}
        Shell $(UtilityInf), GetBusTypeDialog, $(ProductHardware$(Option)Description) $(BusNumber)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
    	    goto Shell_Code_Error
        endif
        set BusInterfaceType = $($R1)
        set BusNumber = $($R2)
    else
        set BusInterfaceType = *($(!STF_NCDETINFO),5)
        set BusNumber = *($(!STF_NCDETINFO),6)
    endif
adapterverify = +
    Debug-Output "At adapterverify"
    Shell "" DebugConfiguration "after running dialog"
    Ifstr(i) $(AdapterDetected) != TRUE
        Goto Update_Registry
    Endif
    Debug-Output "OEMNADMA.INF: Calling Param_VerifyCard"
    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        Debug-Output "OEMNADMA.INF: Param_VerifyCard succeeded"
        Goto Update_Registry
    Endif
    Set from = Get_Adapter_Options
    Set to = Update_Registry
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
    EndWait
Update_Registry = +
    ifint $(OldVersionExisted) == $(TRUE)
	    ifstr(i) $(!NTN_InstallMode) == configure
	        goto Write_Parameters
	    endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	    Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	        $(ProductSoftwareName), +
	        $(ProductSoftwareName), +
	        $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	        $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	        $(MadgeEventLogFile)
	    Set OEM_ABANDON_SOFTWARE = TRUE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        goto Shell_Code_Error
	    endif
	    set RegistryErrorIndex = $($R0)
	    set KeyProduct         = $($R1)
	    Set SoftNetRulesKey    = $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        CloseRegKey $(KeyProduct)
	        CloseRegKey $(SoftNetRulesKey)
	        goto Fatal_Registry
	    endif
	    set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			       {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			       {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			       {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			       {PathName,$(NoTitle),$(!REG_VT_SZ),$(!STF_CWDDIR)},+
			       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	    Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        goto Shell_Code_Error
	    endif
	    set RegistryErrorIndex = $($R0)
	    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        CloseRegKey $(KeyProduct)
	        CloseRegKey $(SoftNetRulesKey)
	        goto Fatal_Registry
	    endif
	    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			        {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			        {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			        {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, +
			        {Infname ,$(NoTitle),$(!REG_VT_SZ),$(STF_CONTEXTINFNAME)} }
	    Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        goto Shell_Code_Error
	    endif
	    set RegistryErrorIndex = $($R0)
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        goto Fatal_Registry
	    endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
    	Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto Shell_Code_Error
    endif
    set RegistryErrorIndex = $($R0)
    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    goto Fatal_Registry
    endif
    set KeyParameters   = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber   = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
               {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    	goto Shell_Code_Error
    endif
    CloseRegKey $($R1)
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}, +
			{Infname ,$(NoTitle),$(!REG_VT_SZ),$(STF_CONTEXTINFNAME)}}
    Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    	goto Shell_Code_Error
    endif
    set RegistryErrorIndex = $($R0)
    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    CloseRegKey $(KeyParameters)
	    CloseRegKey $(KeyAdapterRules)
	    goto Fatal_Registry
    endif
    CloseRegKey $(KeyAdapterRules)
    EndWait
Write_Parameters = +
    StartWait
    ifstr(i) $(Option) == "MSMDGMPPCMCIA"
        set BusInterfaceType = 1
    endif
    ifint $(DmaChannel) == $(GENERAL_MMIO)
        set NoMmioFlag = 0
    else
        set NoMmioFlag = 1
    endif
    ifint $(DmaChannel) == $(GENERAL_PIO)
        set TransferType = $(TRANSFER_PIO)
    else-ifint $(DmaChannel) == $(GENERAL_MMIO)
        set TransferType = $(TRANSFER_MMIO)
    else
        set TransferType = $(TRANSFER_DMA)
    endif
    set AdapterTypeFlag = $(AdapterTypeFlag$(Option))
    ifcontains(i) $(Option) not-in $(SlotNumberAdapters)
    	set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IrqNumber)},+
			{BusType,        $(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
			{BusNumber,      $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
			{MediaType,      $(NoTitle),$(!REG_VT_DWORD),2},+
			{IoLocation,     $(NoTitle),$(!REG_VT_DWORD),$(IoLocation)},+
			{IoBaseAddress,  $(NoTitle),$(!REG_VT_DWORD),$(IoLocation)},+
			{DmaChannel,     $(NoTitle),$(!REG_VT_DWORD),$(DmaChannel)},+
			{NoMmio,         $(NoTitle),$(!REG_VT_DWORD),$(NoMmioFlag)},+
			{TransferType,   $(NoTitle),$(!REG_VT_DWORD),$(TransferType)},+
                        {RxTxSlots,      $(NoTitle),$(!REG_VT_DWORD),$(RxTxSlots)},+
                        {Multiprocessor, $(NoTitle),$(!REG_VT_DWORD),$(MpFlag)},+
			{MaxFrameSize,   $(NoTitle),$(!REG_VT_DWORD),$(MaxFrameSize)},+
                        {AdapterType,    $(NoTitle),$(!REG_VT_DWORD),$(AdapterTypeFlag)}}
    else
    	set NewValueList = {+
			{BusType,        $(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
			{BusNumber,      $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
			{MediaType,      $(NoTitle),$(!REG_VT_DWORD),2},+
			{SlotNumber,     $(NoTitle),$(!REG_VT_DWORD),$(SlotNumber)},+
			{NoMmio,         $(NoTitle),$(!REG_VT_DWORD),$(NoMmioFlag)},+
			{TransferType,   $(NoTitle),$(!REG_VT_DWORD),$(TransferType)},+
                        {RxTxSlots,      $(NoTitle),$(!REG_VT_DWORD),$(RxTxSlots)},+
                        {Multiprocessor, $(NoTitle),$(!REG_VT_DWORD),$(MpFlag)},+
			{MaxFrameSize,   $(NoTitle),$(!REG_VT_DWORD),$(MaxFrameSize)},+
                        {AdapterType,    $(NoTitle),$(!REG_VT_DWORD),$(AdapterTypeFlag)}}
    endif
    ifstr(i) $(ID$(Option)) != ""
    	set NewValueList = >($(NewValueList),+
			     {$(IDV$(Option)), $(NoTitle), $(!REG_VT_DWORD), $(ID$(Option))})
    endif
    ifstr $(LAA) != ""
    	set NewValueList = >($(NewValueList),+
			     {NetworkAddress, $(NoTitle), $(!REG_VT_SZ), $(LAA)})
    endif
    ifstr $(StatsFlag) == "1"
    	set NewValueList = >($(NewValueList),+
			     {PromiscuousModeX, $(NoTitle), $(!REG_VT_DWORD), $(StatsFlag)})
    endif
    ifstr $(SpeedFlag) == "1"
    	set NewValueList = >($(NewValueList),+
			     {Force4, $(NoTitle), $(!REG_VT_DWORD), 1})
    endif
    ifstr $(SpeedFlag) == "2"
    	set NewValueList = >($(NewValueList),+
			     {Force16, $(NoTitle), $(!REG_VT_DWORD), 1})
    endif
    ifstr(i) $(Option) == "MSMDGMPPCMCIA"
    	set NewValueList = >($(NewValueList),+
			     {Pcmcia, $(NoTitle), $(!REG_VT_DWORD), 1})
    endif
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
    	goto Shell_Code_Error
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    CloseRegKey $(KeyParameters)
	    goto Fatal_Registry
    endif
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif
    ifstr $(OldLAA) != ""
	    ifstr $(LAA) == ""
	        DeleteRegValue $(KeyParameters) NetworkAddress
	    endif
    endif
    ifstr $(OldSpeedFlag) == "1"
	    ifstr $(SpeedFlag) != "1"
	        DeleteRegValue $(KeyParameters) Force4
	    endif
    endif
    ifstr $(OldSpeedFlag) == "2"
	    ifstr $(SpeedFlag) != "2"
	        DeleteRegValue $(KeyParameters) Force16
	    endif
    endif
    ifstr $(OldStatsFlag) != "0"
	    ifstr $(StatsFlag) == "0"
	        DeleteRegValue $(KeyParameters) PromiscuousModeX
	    endif
    endif
    CloseRegKey $(KeyParameters)
    EndWait
    goto Successful
Binding_Adapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto Fatal
Remove_Adapter = +
    StartWait
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	        $(ProductSoftwareName)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        goto Shell_Code_Error
	    endif
	    set RegistryErrorIndex = $($R0)
	    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        goto Fatal_Registry
	    endif
    else
	    Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	        $(ProductSoftwareName), $(!NTN_RegBase)     
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	        goto Shell_Code_Error
	    endif
	    set RegistryErrorIndex = $($R0)
	    ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	        goto Fatal_Registry
	    endif
    endif
    EndWait
    goto End
Upgrade_Software = +
    StartWait
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
	    ifstr $(KeyProduct) != $(KeyNull)
	        GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
	        set Version = *($(VersionInfo), 4)
	        shell $(UtilityInf) GetInfFileNameFromRegistry $(KeyProduct)
	        ifint $($ShellCode) != $(!SHELL_CODE_OK)
    		    goto Shell_Code_Error
            endif
	        set !UG_Filename = $($R0)
	        ifstr(i) $(!UG_Filename) != ""
        	    install "Install-Update"
		        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    goto Fatal
                endif
	        endif
	        CloseRegKey $(KeyProduct)
	        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
	        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	        ifint $(Version) != $(ProductMajorVersion)
            endif
	        CloseRegKey $(KeyProduct)
	    else
	        goto Fatal_Registry
	    endif
        set iSearch = 1
nextnetcard = +
        Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
        set KeyNetcard = $($R0)
        set iSearch = $($R1)
        Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
        Ifstr $(KeyNetcard) != $(KeyNull)
            Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
            SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
            CloseRegKey $(KeyNetcard)
            goto nextnetcard
        Endif
    else
        set Error          = ""
        set OEM_ABANDON_ON = FALSE
        goto Not_Supported
    endif
    EndWait
    goto End
Successful = +
    goto End
Abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)        
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto Shell_Code_Error
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto Fatal_Registry
	endif
    EndForListDo
    ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto Shell_Code_Error
	endif
	set RegistryErrorIndex = $($R0)
	ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto Fatal_Registry
	endif
    endif
    goto End
Warning = +
    EndWait
    Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto Shell_Code_Error
    endif
    ifstr(i) $($R1) == "OK"
	goto $(To)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(From)
    endif
    goto End
Non_Fatal_Info = +
    set Severity     = STATUS
    set CommonStatus = STATUS_USERCANCEL
    goto Non_Fatal_Msg
Non_Fatal = +
    set  Severity = NONFATAL
    goto Non_Fatal_Msg
Non_Fatal_Msg = +
    EndWait
    ifstr(i) $(Error) == ""
	set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto Shell_Code_Error
	endif
	set Error = $($R0)
    endif
    Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "NONFATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto Shell_Code_Error
    endif
    ifstr(i) $($R1) == "OK"
	goto $(From)
    endif
    goto End
Fatal_Registry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto Shell_Code_Error
    endif
    set Error = $($R0)
    goto Fatal
fataldetect = +
    Debug-Output "At fataldetect"
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error: cannot get an error string."
        goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
Fatal = +
    EndWait
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto Shell_Code_Error
	endif
	set Error = $($R0)
    endif
    Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto Shell_Code_Error
    endif
    goto Set_Failed
Not_Supported = +
    EndWait
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "OPERATION_UNIMPLEMENTED"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto Shell_Code_Error
	endif
	set Error = $($R0)
    endif
    Shell $(SubroutineInf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto Shell_Code_Error
    endif
    goto End
Shell_Code_Error = +
    EndWait
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto Set_Failed
Set_Failed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto Abandon
    endif
    goto End
End = +
    goto Term
Term = +
    Return $(CommonStatus)
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Helper $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Driver $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   exit
[Install-Option]
    set STF_VITAL        = ""
    AddSectionFilesToCopyList Files-Helper $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Driver $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    ifstr(i) $(DoCopy) == "YES"
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList
    else
        LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\mdgmpdlg.DLL $(!STF_WINDOWSSYSPATH)\mdgmpdlg.DLL
        LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\mdgmpdlg.HLP $(!STF_WINDOWSSYSPATH)\mdgmpdlg.HLP
    Endif
    exit
[Source Media Descriptions]
    1 = "Windows NT Server CD-ROM", TAGFILE = cdrom_s.40
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = LanmanNT
STF_PLATFORM = I386
[Files-Inf]
2,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)
[Files-Driver]
1,MDGMPORT.BIN , SIZE=57142
1,MDGMPORT.SYS , SIZE=47568
[Files-Helper]
1,MDGMPDLG.DLL , SIZE=15632
1,MDGMPDLG.HLP , SIZE=18350
[LanguagesSupported]
    ENG
[OptionsTextENG]
    MSMDGMPISA   = "Madge Smart 16/4 AT Ringnode"
    MSMDGMPATP   = "Madge Smart 16/4 AT Plus Ringnode"
    MSMDGMPISAC  = "Madge Smart 16/4 ISA Client Ringnode"
    MSMDGMPISACP = "Madge Smart 16/4 ISA Client Plus Ringnode"
    MSMDGMPPC    = "Madge Smart 16/4 PC Ringnode"
    MSMDGMPSM16  = "Madge Smart 16 Ringnode"
    MSMDGMPPNP   = "Madge Smart 16/4 ISA Client PnP Ringnode"
    MSMDGMPMCA   = "Madge Smart 16/4 MC Ringnode"
    MSMDGMPMC32  = "Madge Smart 16/4 MC32 Ringnode"
    MSMDGMPEISA  = "Madge Smart 16/4 EISA Ringnode"
    MSMDGMPPCI   = "Madge Smart 16/4 PCI Ringnode"
    MSMDGMPPCIBM = "Madge Smart 16/4 PCI Ringnode (BM)"
    MSMDGMPPCMCIA = "Madge Smart 16/4 PCMCIA Ringnode"
[OptionsTextISAENG]
    MSMDGMPISA   = "Madge Smart 16/4 AT Ringnode"
    MSMDGMPATP   = "Madge Smart 16/4 AT Plus Ringnode"
    MSMDGMPISAC  = "Madge Smart 16/4 ISA Client Ringnode"
    MSMDGMPISACP = "Madge Smart 16/4 ISA Client Plus Ringnode"
    MSMDGMPPC    = "Madge Smart 16/4 PC Ringnode"
    MSMDGMPSM16  = "Madge Smart 16 Ringnode"
    MSMDGMPPNP   = "Madge Smart 16/4 ISA Client PnP Ringnode"
[OptionsTextMCAENG]
    MSMDGMPMCA   = "Madge Smart 16/4 MC Ringnode"
    MSMDGMPMC32  = "Madge Smart 16/4 MC32 Ringnode"
[OptionsTextEISAENG]
    MSMDGMPEISA  = "Madge Smart 16/4 EISA Ringnode"
    MSMDGMPISA   = "Madge Smart 16/4 AT Ringnode"
    MSMDGMPATP   = "Madge Smart 16/4 AT Plus Ringnode"
    MSMDGMPISAC  = "Madge Smart 16/4 ISA Client Ringnode"
    MSMDGMPISACP = "Madge Smart 16/4 ISA Client Plus Ringnode"
    MSMDGMPPC    = "Madge Smart 16/4 PC Ringnode"
    MSMDGMPSM16  = "Madge Smart 16 Ringnode"
    MSMDGMPPNP   = "Madge Smart 16/4 ISA Client PnP Ringnode"
[OptionsTextPCIENG]
    MSMDGMPPCI   = "Madge Smart 16/4 PCI Ringnode"
    MSMDGMPPCIBM = "Madge Smart 16/4 PCI Ringnode (BM)"
[OptionsTextPCMCIAENG]
    MSMDGMPPCMCIA = "Madge Smart 16/4 PCMCIA Ringnode"
[IoLocationChoices]
    "0x0300",768
    "0x0a20",2592
    "0x1a20",6688
    "0x2a20",10784
    "0x3a20",14880
    "0x4a20",18976
    "0x4e20",20000
    "0x5a20",23072
    "0x5e20",24096
    "0x6a20",27168
    "0x6e20",28192
    "0x7a20",31264
    "0x7e20",32288
    "0x0140",320
    "0x0920",2336
    "0x0940",2368
    "0x0960",2400
    "0x0980",2432
    "0x0a40",2624
    "0x0a60",2656
    "0x0a80",2688
    "0x0aa0",2720
    "0x0b20",2848
    "0x0b40",2880
    "0x0b60",2912
    "0x0b80",2944
    "UNKNOWN",65535
[DmaChannelChoices]
    "PIO",0
    "DMA Channel 01",1
    "DMA Channel 02",2
    "DMA Channel 03",3
    "DMA Channel 04",4
    "DMA Channel 05",5
    "DMA Channel 06",6
    "DMA Channel 07",7
    "DMA Channel 08",8
    "DMA Channel 09",9
    "DMA Channel 10",10
    "DMA Channel 11",11
    "DMA Channel 12",12
    "DMA Channel 13",13
    "DMA Channel 14",14
    "DMA Channel 15",15
    "DMA",500
    "MMIO",501
    "UNKNOWN",65535
[IrqNumberChoices]
    "01",1
    "02",2
    "03",3
    "04",4
    "05",5
    "06",6
    "07",7
    "08",8
    "09",9
    "10",10
    "11",11
    "12",12
    "13",13
    "14",14
    "15",15
    "UNKNOWN",65535
[SlotNumberChoices]
    "00",0
    "01",1
    "02",2
    "03",3
    "04",4
    "05",5
    "06",6
    "07",7
    "08",8
    "09",9
    "10",10
    "11",11
    "12",12
    "13",13
    "14",14
    "15",15
    "16",16
    "17",17
    "18",18
    "19",19
    "20",20
    "21",21
    "22",22
    "23",23
    "24",24
    "25",25
    "26",26
    "27",27
    "28",28
    "29",29
    "30",30
    "31",31
    "UNKNOWN",65535
[RxTxSlotsChoices]
    "Rx=02 Tx=02",0
    "Rx=03 Tx=03",1
    "Rx=04 Tx=04",2
    "Rx=06 Tx=06",3
    "Rx=08 Tx=08",4
    "Rx=10 Tx=10",5
[StatsChoices]
    "Disabled",0
    "Enabled",1
[MpChoices]
    "One",0
    "Multiple",1
    "UNKNOWN",65535
[FileConstantsENG]
FunctionTitle   = "MdgMPort v"$(ProductVersion)": Madge Smart Ringnode Setup"
ProductSoftwareTitle       = "MdgMPort"
ProductSoftwareDescription = "MdgMPort: Madge Smart Ringnode NDIS3 Miniport Driver"
ProductHardwareMSMDGMPISATitle   = "Madge Smart 16/4 AT Ringnode"
ProductHardwareMSMDGMPATPTitle   = "Madge Smart 16/4 AT Plus Ringnode"
ProductHardwareMSMDGMPISACTitle  = "Madge Smart 16/4 ISA Client Ringnode"
ProductHardwareMSMDGMPISACPTitle = "Madge Smart 16/4 ISA Client Plus Ringnode"
ProductHardwareMSMDGMPPCTitle    = "Madge Smart 16/4 PC Ringnode"
ProductHardwareMSMDGMPEISATitle  = "Madge Smart 16/4 EISA Ringnode"
ProductHardwareMSMDGMPMCATitle   = "Madge Smart 16/4 MC Ringnode"
ProductHardwareMSMDGMPMC32Title  = "Madge Smart 16/4 MC32 Ringnode"
ProductHardwareMSMDGMPSM16Title  = "Madge Smart 16 Ringnode"
ProductHardwareMSMDGMPPNPTitle   = "Madge Smart 16/4 ISA Client PnP Ringnode"
ProductHardwareMSMDGMPPCITitle   = "Madge Smart 16/4 PCI Ringnode"
ProductHardwareMSMDGMPPCIBMTitle = "Madge Smart 16/4 PCI Ringnode (BM)"
ProductHardwareMSMDGMPPCMCIATitle  = "Madge Smart 16/4 PCMCIA Ringnode"
ProductHardwareMSMDGMPISADescription   = "Madge Smart 16/4 AT Ringnode"
ProductHardwareMSMDGMPATPDescription   = "Madge Smart 16/4 AT Plus Ringnode"
ProductHardwareMSMDGMPISACDescription  = "Madge Smart 16/4 ISA Client Ringnode"
ProductHardwareMSMDGMPISACPDescription = "Madge Smart 16/4 ISA Client Plus Ringnode"
ProductHardwareMSMDGMPPCDescription    = "Madge Smart 16/4 PC Ringnode"
ProductHardwareMSMDGMPEISADescription  = "Madge Smart 16/4 EISA Ringnode"
ProductHardwareMSMDGMPMCADescription   = "Madge Smart 16/4 MC Ringnode"
ProductHardwareMSMDGMPMC32Description  = "Madge Smart 16/4 MC32 Ringnode"
ProductHardwareMSMDGMPSM16Description  = "Madge Smart 16 Ringnode"
ProductHardwareMSMDGMPPNPDescription   = "Madge Smart 16/4 ISA Client PnP Ringnode"
ProductHardwareMSMDGMPPCIDescription   = "Madge Smart 16/4 PCI Ringnode"
ProductHardwareMSMDGMPPCIBMDescription = "Madge Smart 16/4 PCI Ringnode (BM)"
ProductHardwareMSMDGMPPCMCIADescription   = "Madge Smart 16/4 PCMCIA Ringnode"
SpeedUserListMSMDGMPISA    = {"Set at adapter", "Force 16 MBit/s"}
SpeedRawListMSMDGMPISA     = {0, 2}
SpeedUserListMSMDGMPATP    = {"Set at adapter", "Force 4 MBit/s", "Force 16 MBit/s"}
SpeedRawListMSMDGMPATP     = {0, 1, 2}
SpeedUserListMSMDGMPISAC   = {"Set at adapter", "Force 16 MBit/s"}
SpeedRawListMSMDGMPISAC    = {0, 2}
SpeedUserListMSMDGMPISACP  = {"Set at adapter", "Force 4 MBit/s", "Force 16 MBit/s"}
SpeedRawListMSMDGMPISACP   = {0, 1, 2}
SpeedUserListMSMDGMPPC     = {"Set at adapter", "Force 16 MBit/s"}
SpeedRawListMSMDGMPPC      = {0, 2}
SpeedUserListMSMDGMPEISA   = {"Set at adapter"}
SpeedRawListMSMDGMPEISA    = {0}
SpeedUserListMSMDGMPMCA    = {"Set at adapter"}
SpeedRawListMSMDGMPMCA     = {0}
SpeedUserListMSMDGMPMC32   = {"Set at adapter"}
SpeedRawListMSMDGMPMC32    = {0}
SpeedUserListMSMDGMPSM16   = {"Always 16 MBit/s"}
SpeedRawListMSMDGMPSM16    = {0}
SpeedUserListMSMDGMPPNP    = {"Set at adapter", "Force 4 MBit/s", "Force 16 MBit/s"}
SpeedRawListMSMDGMPPNP     = {0, 1, 2}
SpeedUserListMSMDGMPPCI    = {"Set at adapter", "Force 4 MBit/s", "Force 16 MBit/s"}
SpeedRawListMSMDGMPPCI     = {0, 1, 2}
SpeedUserListMSMDGMPPCIBM  = {"Set at adapter", "Force 4 MBit/s", "Force 16 MBit/s"}
SpeedRawListMSMDGMPPCIBM   = {0, 1, 2}
SpeedUserListMSMDGMPPCMCIA = {"Set at adapter", "Force 4 MBit/s", "Force 16 MBit/s"}
SpeedRawListMSMDGMPPCMCIA  = {0, 1, 2}
AdapterTypeFlagMSMDGMPISA    = 100
AdapterTypeFlagMSMDGMPATP    = 100
AdapterTypeFlagMSMDGMPISAC   = 100
AdapterTypeFlagMSMDGMPISACP  = 100
AdapterTypeFlagMSMDGMPPC     = 100
AdapterTypeFlagMSMDGMPEISA   = 500
AdapterTypeFlagMSMDGMPMCA    = 600
AdapterTypeFlagMSMDGMPMC32   = 600
AdapterTypeFlagMSMDGMPSM16   = 400
AdapterTypeFlagMSMDGMPPNP    = 300
AdapterTypeFlagMSMDGMPPCI    = 700
AdapterTypeFlagMSMDGMPPCIBM  = 700
AdapterTypeFlagMSMDGMPPCMCIA = 200
CANNOT_FIND_ANY_CARD = "Cannot find a Madge Smart Ringnode in the machine. "+
                       "If you are certain that a Madge Smart Ringode is "+
                       "present then try choosing the adapter type "+
                       "instead of automatic installation. Please note "+
                       "that EISA and MCA adapters will only be found if "+
                       "the EISA configuration utility or PS/2 reference "+
                       "diskette respectively have been used to configure "+
                       "the adapter. Also not that automated installation "+
                       "will not find PCI adapters."
TRIMMED_MFS = "WARNING: The maximum frame size at 16Mbps is 17839 bytes"+
	      "  and you have specified a value greater than that. This"+
	      "  value has been reduced to 17839 for you. If you are in"+
	      "  fact running at 4Mbps, the maximum frame size is 4472,"+
	      "  but do not worry -  the driver will automatically  set"+
	      "  the correct value, and write it to the Event Log."
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText  = "Shell Code Error"
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "&Cancel"
OK          = "&OK"
Continue    = "C&ontinue"
Cancel      = "C&ancel"
HelpContext = ""
OldValueTitleInstall   = "Current hardware settings"
OldValueTitleConfigure = "Currently configured settings"
ConsultHelp = "Consult help before changing the settings below"
[FileDependentDlgENG]
DlgType     = "RadioCombination"
DlgTemplate = $(Option)
Caption = $(FunctionTitle)
Combo1Label = "&IRQ Level:"
Combo2Label = "I/O &Location:"
Combo3Label = "&Transfer method:"
Combo4Label = "Rx/Tx &Buffers:"
Combo5Label = "Traffic &Statistics Gathering:"
Combo6Label = "Please choose a Madge adapter to install"
Combo7Label = "Number of processors in &PC:"
Combo8Label = "Slot &Number:"
Combo9Label = "&Ring Speed:"
PciCombo8Label = "PCI &Device ID:"
Combo1List = $(IrqList)
Combo1Out  = $(IrqNumber)
Combo2List = $(IoList)
Combo2Out  = $(IoLocation)
Combo3List = $(DmaList)
Combo3Out  = $(DmaChannel)
Combo4List = $(RxTxUserList)
Combo4Out  = $(RxTxSlots)
Combo5List = $(StatsUserList)
Combo5Out  = $(StatsFlag)
Combo6List = $(AdapterDescList)
Combo6Out  = $(AdapterType)
Combo7List = $(MpList)
Combo7Out  = $(MpFlag)
Combo8List = $(SlotList)
Combo8Out  = $(SlotNumber)
Combo9List = $(SpeedUserList)
Combo9Out  = $(SpeedFlag)
ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List, Combo6List, Combo7List, Combo8List, Combo9List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out, Combo8Out, Combo9Out}
Edit1Label  = "Max&FrameSize:"
Edit2Label  = "&LAA:"
EditTextIn  = {$(MaxFrameSize), $(LAA)}
EditTextLim = {5,17}
EditTextOut = {}
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO, NO, NO, NO, NO}
HelpContext = $(MadgeHelpId$(Option))
AdapterTitle = #(OptionsText$(!STF_LANGUAGE),$(Option),1)