; OEMSETUP FILE FOR DC21x4 based Ethernet adapters , v4.16 ; NDIS 3.1 - Windows NT 3.51 - ; ; Supported adapters: ; DEC DC21040 PCI Ethernet Controller ; DEC DC21041 PCI Ethernet Controller ; DEC DC21140 PCI Fast Ethernet Controller ; DEC DC21142 PCI Ethernet Controller ; DEC DC21143 PCI Ethernet Controller ; DEC EB40 DC21040's Evaluation board ; DEC EB41 DC21041's Evaluation board ; DEC EB140 DC21140's Evaluation board ; DEC EB142 DC21142's Evaluation board ; DEC EB143 DC21143's Evaluation board ; DEC multia's Ethernet Controller ; DEC DE434 PCI Ethernet Adapter ; DEC DE435 PCI Ethernet Adapter ; DEC DE450 PCI Ethernet Adapter ; DEC DE500 PCI Fast Ethernet Adapter ; DEC DE425 EISA Ethernet Adapter ; ; Digital Equipment Corporation, Maynard, Mass. ; ; The information in this software is subject to change without notice ; and should not be construed as a commitment by Digital Equipment ; Corporation. ; ; Digital assumes no responsibility for the use or reliability of its ; software on equipment which is not supplied by Digital. ; ; Usage: ; ; This file is the installation/configuration/deinstallation ; procedure of the DEC DC21x4 driver for Windows NT. It can be called ; from Windows Setup directly, or via the Windows NT Networks ; Control Program Applet (NCPA) from inside the Windows ; Control Panel. ; ;---------------------------------------------------------------------------------------- [Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" PCI [Options] DC21040 DC21041 DC21140 DC21142 DC21143 EB40 EB41 EB140 EB142 EB143 MULTIA DE434 DE435 DE450 DE500 DE425 [ConnectionChoicesDC21040] Connect_0 = "AutoDetect", 0 Connect_1 = "10BaseT (Twisted_Pair) ", 2 Connect_2 = "10BaseT Full_Duplex ", 3 Connect_3 = "10BaseT No_Link_Test", 4 Connect_4 = "10Base2 (BNC)", 1 Connect_5 = "10Base5 (AUI)", 5 [ConnectionChoicesDC21041] Connect_0 = "AutoSense", 0 Connect_1 = "AutoSense No_Nway", 6 Connect_2 = "10BaseT (Twisted_Pair) ", 2 Connect_3 = "10BaseT Full_Duplex ", 3 Connect_5 = "10BaseT No_Link_Test", 4 Connect_6 = "10Base2 (BNC)", 1 Connect_7 = "10Base5 (AUI)", 5 [ConnectionChoicesDC21140] Connect_0 = "AutoSense", 0 Connect_1 = "AutoSense No_Nway", 6 Connect_2 = "100BaseTx", 8 Connect_3 = "100BaseTx Full_Duplex", 9 Connect_4 = "100BaseT4", 10 Connect_5 = "100BaseFx", 11 Connect_6 = "100BaseFx Full_Duplex", 12 Connect_7 = "10BaseT (Twisted Pair)", 2 Connect_8 = "10BaseT Full_Duplex", 3 [ConnectionChoicesDC21142] Connect_0 = "AutoSense", 0 Connect_1 = "100BaseTx", 8 Connect_2 = "100BaseTx Full_Duplex", 9 Connect_3 = "100BaseT4", 10 Connect_4 = "100BaseFx", 11 Connect_5 = "100BaseFx Full_Duplex", 12 Connect_6 = "10BaseT (Twisted_Pair) ", 2 Connect_7 = "10BaseT Full_Duplex", 3 Connect_8 = "10BaseT No_Link_Test", 4 Connect_9 = "10Base2 (BNC)", 1 Connect_10= "10Base5 (AUI)", 5 [ConnectionChoicesDC21143] Connect_0 = "AutoSense", 0 Connect_1 = "100BaseTx", 8 Connect_2 = "100BaseTx Full_Duplex", 9 Connect_3 = "100BaseT4", 10 Connect_4 = "100BaseFx", 11 Connect_5 = "100BaseFx Full_Duplex", 12 Connect_6 = "10BaseT (Twisted_Pair) ", 2 Connect_7 = "10BaseT Full_Duplex", 3 Connect_8 = "10BaseT No_Link_Test", 4 Connect_9 = "10Base2 (BNC)", 1 Connect_10= "10Base5 (AUI)", 5 [ConnectionChoicesEB40] Connect_0 = "10BaseT (Twisted_Pair) ", 2 Connect_1 = "10BaseT Full_Duplex ", 3 Connect_2 = "10BaseT No_Link_Test", 4 [ConnectionChoicesEB41] Connect_0 = "AutoSense", 0 Connect_1 = "AutoSense No_Nway", 6 Connect_2 = "10BaseT (Twisted_Pair) ", 2 Connect_3 = "10BaseT Full_Duplex ", 3 Connect_4 = "10BaseT No_Link_Test", 4 Connect_5 = "10Base2 (BNC)", 1 Connect_6 = "10Base5 (AUI)", 5 [ConnectionChoicesEB140] Connect_0 = "AutoSense", 0 Connect_1 = "AutoSense No_Nway", 6 Connect_2 = "100BaseTx", 8 Connect_3 = "100BaseTx Full_Duplex", 9 Connect_4 = "10BaseT", 2 Connect_5 = "10BaseT Full_Duplex", 3 [ConnectionChoicesEB142] Connect_0 = "AutoSense", 0 Connect_1 = "100BaseTx", 8 Connect_2 = "100BaseTx Full_Duplex", 9 Connect_3 = "100BaseT4", 10 Connect_4 = "100BaseFx", 11 Connect_6 = "100BaseFx Full_Duplex", 12 Connect_7 = "10BaseT (Twisted_Pair) ", 2 Connect_8 = "10BaseT Full_Duplex", 3 Connect_9 = "10BaseT No_Link_Test", 4 Connect_10= "10Base2 (BNC)", 1 [ConnectionChoicesEB143] Connect_0 = "AutoSense", 0 Connect_1 = "100BaseTx", 8 Connect_2 = "100BaseTx Full_Duplex", 9 Connect_3 = "100BaseT4", 10 Connect_4 = "100BaseFx", 11 Connect_6 = "100BaseFx Full_Duplex", 12 Connect_7 = "10BaseT (Twisted_Pair) ", 2 Connect_8 = "10BaseT Full_Duplex", 3 Connect_9 = "10BaseT No_Link_Test", 4 Connect_10= "10Base2 (BNC)", 1 [ConnectionChoicesMULTIA] Connect_0 = "AutoDetect", 0 Connect_1 = "10BaseT (Twisted_Pair) ", 2 Connect_2 = "10BaseT Full_Duplex ", 3 Connect_3 = "10BaseT No_Link_Test", 4 Connect_4 = "10Base2 (BNC)", 1 Connect_5 = "10Base5 (AUI)", 5 [ConnectionChoicesDE434] Connect_0 = "10BaseT (Twisted_Pair) ", 2 Connect_1 = "10BaseT Full_Duplex ", 3 Connect_2 = "10BaseT No_Link_Test", 4 [ConnectionChoicesDE435] Connect_0 = "AutoDetect", 0 Connect_1 = "10BaseT (Twisted_Pair) ", 2 Connect_2 = "10BaseT Full_Duplex ", 3 Connect_3 = "10BaseT No_Link_Test", 4 Connect_4 = "10Base2 (BNC)", 1 Connect_5 = "10Base5 (AUI)", 5 [ConnectionChoicesDE450] Connect_0 = "AutoSense", 0 Connect_1 = "AutoSense No_Nway", 6 Connect_2 = "10BaseT (Twisted_Pair) ", 2 Connect_3 = "10BaseT Full_Duplex ", 3 Connect_4 = "10BaseT No_Link_Test", 4 Connect_5 = "10Base2 (BNC)", 1 Connect_6 = "10Base5 (AUI)", 5 [ConnectionChoicesDE500] Connect_0 = "AutoSense", 0 Connect_1 = "100BaseTx", 8 Connect_2 = "100BaseTx Full_Duplex", 9 Connect_3 = "10BaseT", 2 Connect_4 = "10BaseT Full_Duplex", 3 [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "DigitalEquipmentCorporation" ProductMajorVersion = "4" ProductMinorVersion = "16" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) VendorID = 4113 ;; 1011 (DEC) ProductSoftwareName = "DC21X4" ProductSoftwareTitle = "DEC DC21X4 Adapter Driver" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\DC21X4.sys" NetRuleSoftwareType = "DC21X4Sys ndisDriver DC21X4Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """DC21X4Sys"" yes no container" NetRuleSoftwareClass = {"DC21X4Driver basic"} NetRuleSoftwareSWBindable = {"DC21X4Driver DC21040Adapter non exclusive 100",+ "DC21X4Driver DC21041Adapter non exclusive 100",+ "DC21X4Driver DC21140Adapter non exclusive 100",+ "DC21X4Driver DC21142Adapter non exclusive 100",+ "DC21X4Driver DC21143Adapter non exclusive 100",+ "DC21X4Driver EB40Adapter non exclusive 100",+ "DC21X4Driver EB41Adapter non exclusive 100",+ "DC21X4Driver EB140Adapter non exclusive 100",+ "DC21X4Driver EB142Adapter non exclusive 100",+ "DC21X4Driver EB143Adapter non exclusive 100",+ "DC21X4Driver MULTIAAdapter non exclusive 100",+ "DC21X4Driver DE434Adapter non exclusive 100",+ "DC21X4Driver DE435Adapter non exclusive 100",+ "DC21X4Driver DE500Adapter non exclusive 100",+ "DC21X4Driver DE450Adapter non exclusive 100",+ "DC21X4Driver DE425Adapter non exclusive 100"} OptionHelpFile = "DC21X4.hlp" ProductHardwareName = "DC21X4" ProductHardwareDC21040Title = "DEC PCI Ethernet DC21040" NetRuleHardwareDC21040Type = "DC21040 DC21040Adapter" NetRuleHardwareDC21040Class = {"DC21040Adapter basic"} AdapterDC21040Type = 5 ;; PCI board HelpDC21040Id = 10 DC21040CFID = 135185 ;; 0x00021011 ProductHardwareDC21041Title = "DEC PCI Ethernet DC21041" NetRuleHardwareDC21041Type = "DC21041 DC21041Adapter" NetRuleHardwareDC21041Class = {"DC21041Adapter basic"} AdapterDC21041Type = 5 ;; PCI board HelpDC21041Id = 20 DC21041CFID = 1314833 ;; 0x00141011 ProductHardwareDC21140Title = "DEC PCI Fast Ethernet DC21140" NetRuleHardwareDC21140Type = "DC21140 DC21140Adapter" NetRuleHardwareDC21140Class = {"DC21140Adapter basic"} AdapterDC21140Type = 5 ;; PCI board HelpDC21140Id = 30 DC21140CFID = 593937 ;; 0x00091011 StoreAndForward = 1 ;; Store_and_forward mode enabled TxmThreshold100 = 512 ;; 100Mbps default threshold ProductHardwareDC21142Title = "DEC PCI Ethernet DC21142" NetRuleHardwareDC21142Type = "DC21142 DC21142Adapter" NetRuleHardwareDC21142Class = {"DC21142Adapter basic"} AdapterDC21142Type = 5 ;; PCI board HelpDC21142Id = 40 DC21142CFID = 1642513 ;; 0x00191011 ProductHardwareDC21143Title = "DEC PCI Ethernet DC21143" NetRuleHardwareDC21143Type = "DC21143 DC21143Adapter" NetRuleHardwareDC21143Class = {"DC21143Adapter basic"} AdapterDC21143Type = 5 ;; PCI board HelpDC21143Id = 50 DC21143CFID = 1642513 ;; 0x00191011 ProductHardwareEB40Title = "DEC DC21040's Evaluation Board" NetRuleHardwareEB40Type = "EB40 EB40Adapter" NetRuleHardwareEB40Class = {"EB40Adapter basic"} AdapterEB40Type = 5 ;; PCI board HelpEB40Id = 100 EB40CFID = 135185 ;; 0x00021011 ProductHardwareEB41Title = "DEC DC21041's Evaluation Board" NetRuleHardwareEB41Type = "EB41 EB41Adapter" NetRuleHardwareEB41Class = {"EB41Adapter basic"} AdapterEB41Type = 5 ;; PCI board HelpEB41Id = 110 EB41CFID = 1314833 ;; 0x00141011 ProductHardwareEB140Title = "DEC DC21140's Evaluation Board" NetRuleHardwareEB140Type = "EB140 EB140Adapter" NetRuleHardwareEB140Class = {"EB140Adapter basic"} AdapterEB140Type = 5 ;; PCI board HelpEB140Id = 120 EB140CFID = 593937 ;; 0x00091011 ProductHardwareEB142Title = "DEC DC21142's Evaluation Board" NetRuleHardwareEB142Type = "EB142 EB142Adapter" NetRuleHardwareEB142Class = {"EB142Adapter basic"} AdapterEB142Type = 5 ;; PCI board HelpEB142Id = 130 EB142CFID = 1642513 ;; 0x00191011 ProductHardwareEB143Title = "DEC DC21143's Evaluation Board" NetRuleHardwareEB143Type = "EB143 EB143Adapter" NetRuleHardwareEB143Class = {"EB143Adapter basic"} AdapterEB143Type = 5 ;; PCI board HelpEB143Id = 140 EB143CFID = 1642513 ;; 0x00191011 ProductHardwareMULTIATitle = "DEC multia's Ethernet Controller" NetRuleHardwareMULTIAType = "MULTIA MULTIAAdapter" NetRuleHardwareMULTIAClass = {"MULTIAAdapter basic"} AdapterMULTIAType = 5 ;; PCI board HelpMULTIAId = 200 MULTIACFID = 135185 ;; 0x00021011 SiaRegister0 = 12353 ;; CSR13 = 0x3041 SiaRegister1 = 0 ;; CSR14 = 0x0000 SiaRegister2 = 6 ;; CSR15 = 0x0006 ProductHardwareDE434Title = "DEC DE434 EtherWORKS Turbo PCI TP Adapter" NetRuleHardwareDE434Type = "DE434 DE434Adapter" NetRuleHardwareDE434Class = {"DE434Adapter basic"} AdapterDE434Type = 5 ;; PCI board HelpDE434Id = 210 DE434CFID = 135185 ;; 0x00021011 ProductHardwareDE435Title = "DEC DE435 EtherWORKS Turbo PCI Combo Adapter" NetRuleHardwareDE435Type = "DE435 DE435Adapter" NetRuleHardwareDE435Class = {"DE435Adapter basic"} AdapterDE435Type = 5 ;; PCI board HelpDE435Id = 220 DE435CFID = 135185 ;; 0x00021011 ProductHardwareDE450Title = "DEC DE450 EtherWORKS Turbo PCI Combo Adapter" NetRuleHardwareDE450Type = "DE450 DE450Adapter" NetRuleHardwareDE450Class = {"DE450Adapter basic"} AdapterDE$50Type = 5 ;; PCI board HelpDE450Id = 240 DE450CFID = 1314833 ;; 0x00141011 ProductHardwareDE500Title = "DEC DE500 FastEtherWORKS 10/100 PCI Adapter" NetRuleHardwareDE500Type = "DE500 DE500Adapter" NetRuleHardwareDE500Class = {"DE500Adapter basic"} AdapterDE500Type = 5 ;; PCI board HelpDE500Id = 250 DE500CFID = 593937 ;; 0x00091011 ProductHardwareDE425Title = "DEC DE425 EISA Ethernet Adapter" NetRuleHardwareDE425Type = "DE425 DE425Adapter" NetRuleHardwareDE425Class = {"DE425Adapter basic"} AdapterDE425Type = 2 ;; EISA board DE425CFID = 135185 ;; 0x00021011 DE425_1BYTE = 1346544400 ;;Compressed EISA ID "DEC4250" EISA_MASK = 4043309055 NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(Function$(Option)Title) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else-ifstr(i) $(Option) == "DE425" Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif Endif ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Hlp" endif Goto installproduct configureadapter = + Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "ConnectionType" set ConnectionIndex = $(ValueData) endif EndForListDo set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex))) ifstr(i) $(ConnectionValue) == "" set ConnectionValue = *($(ConnectionList), 2) endif adapteroptions = + ifstr(i) $(Option) != "DE425" set from = adapteroptions read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set ConnectionIndex = $(Combo1Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) ifstr(i) $(!NTN_InstallMode) == configure goto updateparameters endif endif installproduct =+ StartWait ifstr(i) $(Option) == "DE425" Shell $(UtilityInf), EISAFindBus, $($(Option)_1BYTE),$(EISA_MASK) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif set AdapterList = $($R1) else set-div DeviceID = $($(Option)CFID) 65536 Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R0) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif set AdapterList = $($R0) endif ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ForListDo $(AdapterList) set BusNum = *($($),1) set DeviceNum = *($($),2) set FunctionNum = *($($),3) ifstr(i) $(Option) == "DE425" Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), + $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 2 set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) CloseRegKey $(HardParameterKey) endif else Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) != "YES" read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set ConnectionIndex = $(Combo1Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex))) Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusTypeNum = 5 set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifint $($(Option)CFID) == $(DC21041CFID) set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set NewValueList = {{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DC21142CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set NewValueList = {{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DC21143CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DE450CFID) set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifint $($(Option)CFID) == $(DC21140CFID) set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+ {TransmitThreshold100,$(NoTitle),$(!REG_VT_DWORD),$(TxmThreshold100)},+ {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif ifstr(i) $(Option) == "MULTIA" set NewValueList = {{ExternalSia,$(NoTitle),$(!REG_VT_DWORD),1},+ {SiaRegister0,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister0)},+ {SiaRegister1,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister1)},+ {SiaRegister2,$(NoTitle),$(!REG_VT_DWORD),$(SiaRegister2)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+ {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) CloseRegKey $(HardParameterKey) endif endif EndForListDo EndWait goto successful updateparameters =+ set HardParameterKey = $($R3) set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyParameters) goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Hlp] set STF_VITAL = "" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "DEC DC21x4 NDIS 3.1 Driver" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 STF_PLATFORM = PPC STF_PLATFORM = Alpha [Files-Inf] 2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-DC21040] 1,DC21X4.SYS , SIZE=999 [Files-DC21041] 1,DC21X4.SYS , SIZE=999 [Files-DC21140] 1,DC21X4.SYS , SIZE=999 [Files-DC21142] 1,DC21X4.SYS , SIZE=999 [Files-DC21143] 1,DC21X4.SYS , SIZE=999 [Files-EB40] 1,DC21X4.SYS , SIZE=999 [Files-EB41] 1,DC21X4.SYS , SIZE=999 [Files-EB140] 1,DC21X4.SYS , SIZE=999 [Files-EB142] 1,DC21X4.SYS , SIZE=999 [Files-EB143] 1,DC21X4.SYS , SIZE=999 [Files-MULTIA] 1,DC21X4.SYS , SIZE=999 [Files-DE434] 1,DC21X4.SYS , SIZE=999 [Files-DE435] 1,DC21X4.SYS , SIZE=999 [Files-DE450] 1,DC21X4.SYS , SIZE=999 [Files-DE500] 1,DC21X4.SYS , SIZE=999 [Files-DE425] 1,DC21X4.SYS , SIZE=999 [Files-Hlp] 1,DC21X4.HLP , SIZE=999 [LanguagesSupported] ENG [OptionsTextENG] DC21040 = "DEC PCI Ethernet DC21040" DC21041 = "DEC PCI Ethernet DC21041" DC21140 = "DEC PCI Fast Ethernet DC21140" DC21142 = "DEC PCI Fast Ethernet DC21142" DC21143 = "DEC PCI Fast Ethernet DC21143" EB40 = "DEC DC21040's Evaluation Board" EB41 = "DEC DC21041's Evaluation Board" EB140 = "DEC DC21140's Evaluation Board" EB142 = "DEC DC21142's Evaluation Board" EB143 = "DEC DC21143's Evaluation Board" MULTIA = "DEC multia's Ethernet Controller" DE434 = "DEC DE434 EtherWORKS Turbo PCI TP Adapter" DE435 = "DEC DE435 EtherWORKS Turbo PCI Combo Adapter" DE450 = "DEC DE450 EtherWORKS Turbo PCI Combo Adapter" DE500 = "DEC DE500 FastEtherWORKS 10/100 PCI Adapter" DE425 = "DEC DE425 EtherWORKS Turbo EISA Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" ProductSoftwareDescription = "DEC DC21x4 Driver" FunctionDC21040Title = "DEC DC21040 Based Adapter Setup" ProductHardwareDC21040Description = "DEC PCI Ethernet DC21040" FunctionDC21041Title = "DEC DC21041 Based Adapter Setup" ProductHardwareDC21041Description = "DEC PCI Ethernet DC21041" FunctionDC21140Title = "DEC DC21140 Based Adapter Setup" ProductHardwareDC21140Description = "DEC PCI Fast Ethernet DC21140" FunctionDC21142Title = "DEC DC21142 Based Adapter Setup" ProductHardwareDC21142Description = "DEC PCI Fast Ethernet DC21142" FunctionDC21143Title = "DEC DC21143 Based Adapter Setup" ProductHardwareDC21143Description = "DEC PCI Fast Ethernet DC21143" FunctionEB40Title = "DEC EB40 PCI Adapter Card Setup" ProductHardwareEB40Description = "DEC DC21040's Evaluation Board" FunctionEB41Title = "DEC EB41 PCI Adapter Card Setup" ProductHardwareEB41Description = "DEC DC21041's Evaluation Board" FunctionEB140Title = "DEC EB140 PCI Adapter Card Setup" ProductHardwareEB140Description = "DEC DC21140's Evaluation Board" FunctionEB142Title = "DEC EB142 PCI Adapter Card Setup" ProductHardwareEB142Description = "DEC DC21142's Evaluation Board" FunctionEB143Title = "DEC EB143 PCI Adapter Card Setup" ProductHardwareEB143Description = "DEC DC21143's Evaluation Board" FunctionMULTIATitle = "DEC multia's Ethernet Controller Setup" ProductHardwareMULTIADescription = "DEC multia's Ethernet Controller" FunctionDE434Title = "DEC DE434 PCI Adapter Card Setup" ProductHardwareDE434Description = "DEC DE434 EtherWORKS Turbo PCI TP Adapter" FunctionDE435Title = "DEC DE435 PCI Adapter Card Setup" ProductHardwareDE435Description = "DEC DE435 EtherWORKS Turbo PCI Combo Adapter" FunctionDE450Title = "DEC DE450 PCI Adapter Card Setup" ProductHardwareDE450Description = "DEC DE450 EtherWORKS Turbo PCI Combo Adapter" FunctionDE500Title = "DEC DE500 PCI Adapter Card Setup" ProductHardwareDE500Description = "DEC DE500 FastEtherWORKS 10/100 PCI Adapter" FunctionDE425Title = "DEC DE425 EISA Adapter Card Setup" ProductHardwareDE425Description = "DEC DE425 EtherWORKS Turbo EISA Adapter" ConnectionList = ^(ConnectionChoices$(Option), 1) ConnectionValues = ^(ConnectionChoices$(Option), 2) NoList = ^(NoChoices, 1) NoValues = ^(NoChoices, 2) ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "Network card is not present in the system" [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] DlgText = "Choose the proper cable type for the "+ "network adapter. Select [Help] for a detailled "+ "description of the available options of the list." DlgTemplate = "ADAP_PROTO_COMBO" DlgType = "Combination" Caption = $(Function$(Option)Title) Combo1Label = "&Connection Type:" Combo1List = $(ConnectionList) Combo1Out = $(ConnectionValue) ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} EditTextLim = "" CBOptionsGreyed = {} MinHelpId = 10 MaxHelpId = 1140 HelpContext = $(Help$(Option)Id)