Copyright: Copyright (c) 1993-95 Standard Microsystems Corp.


SMC 8000 Ethernet Family Adapter Setup

Use this dialog box to configure settings for the SMC8000 Ethernet Family adapter cards.  For more information click on a field in the dialog box displayed below or press <TAB> to move to the field and then press <ENTER>...


IRQ Level

Select an interrupt level for this adapter card.  IRQ3 is the default setting.


I/O Port
I/O Base

Select an I/O Port for this adapter card.  0x0300 is the default setting.


RAM Address

Select the RAM base address for this adapter card.  The default is 0xD0000.


Detection Information

This information box gives information on whether an SMC adapter was detected or not.  When one is detected, its settings are displayed in the dialogue as the defaults.  If no adapter is detected, the default setting are: Interrupt 3, I/O base  0x0300, and RAM address 0xD0000.


Continue

Select Continue to save the values defined in the dialog box and exit.


Cancel

Select Cancel to exit leaving the current values unchanged.


Help

Select Help to display this file.


SMC 91C100 Fast Ethernet Adapter Setup

Use this dialog box to configure settings for the SMC 91C100 Fast Ethernet adapter card.  For more information click on a field in the dialog box displayed below or press <TAB> to move to the field and then press <ENTER>...


Adapter Speed

Select the speed at which the adapter operates.  The default is High Speed or 100mb.  If Low Speed is selected then the adapter will operate at 10mb.


Contents
SMC 8000 Ethernet Family Adapter Setup Help Contents

Select one of the topics below for more information on setting up a specific adapter.

SMC 8000 Ethernet Family Adapter Setup