Copyright: Digital Equipment Corporation


SMC 8432 Ethernet PCI Adapter
SMC 8432 - EtherPower PCI Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 8432 EtherPower PCI Ethernet adapter.

AutoDetect

Twisted_Pair (10BaseT)

Twisted_Pair Full_Duplex

Twisted_Pair No_Link_Test

BNC (10Base2)

AUI (10Base5)


SMC 8432 Ethernet PCI Adapter
SMC 8432e - EtherPower PCI Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 8432e EtherPower PCI Ethernet adapter.

AutoSense

Twisted_Pair (10BaseT)

Twisted_Pair Full_Duplex

Twisted_Pair No_Link_Test

BNC (10Base2)

AUI (10Base5)


SMC 8434 Ethernet PCI Adapter
SMC 8434 - EtherPower2 PCI Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 8434 EtherPower2 PCI Ethernet adapter.

AutoDetect

Twisted_Pair (10BaseT)

Twisted_Pair Full_Duplex

Twisted_Pair No_Link_Test

BNC (10Base2)

AUI (10Base5)


SMC9332 Fast Ethernet  PCI Adapter
SMC 9332 - EtherPower10/100 PCI Fast Ethernet Adapter

Use this dialog box to setup the data rate for the Standard Microsystems Corporation's SMC 9332  EtherPower10/100 PCI Fast Ethernet adapter.

AutoDetect

100BaseTx

100BaseTx Full_Duplex

10BaseT


Check once the 10BaseT (TP), 10Base2 (BNC) and 10Base5 (AUI) media ports and select the first live media.

This detection takes place during driver initialization: the wire should be connected before the system boots and medias  cannot be switched during run time.

AutoDectect does not check 10BaseT's Full_Duplex and No_Link_Test modes.


Check in sequence the 100BaseTx and 10BaseT port and select the first port connected to a live wire.

This detection takes place during driver initialization. The wire should be connected before the system boots and  medias cannot be switched during run time.

AutoDectect does not support Full_Duplex modes.


Autosense the media ports supported by the adapter and dynamically switch to the live media.does not sense 10BaseT's Full_Duplex and No_Link_Test modes.


Autosense the media ports supported by the adapter and dynamically switch to the live media.does not sense 100BaseT Full_Duplex and 10BaseT Full_Duplex modes.


Autosense the media ports supported by the adapter and dynamically switch to the live media.

Nway's negociation is enabled.does not sense 10BaseT's Full_Duplex and No_Link_Test modes.


Select the 10BaseT connection (RJ connector).


Select the 10BaseT connection (RJ connector).

Nway's negociation is enabled.


Select the Full_Duplex 10BaseT connection (RJ connector).


Select the 10BaseT connection (RJ connector) with no Link Integrity Test.

Choose this option if the adapter is connected to a hub which does not generate link pulses to check the link integrity.


Select the 10Base2 connection (BNC connector).


Select the 10Base5 connection (AUI 15_pin connector).


Select the Fast Ethernet 100BaseTx connection.


Select the Fast Ethernet Full_Duplex 100BaseTx connection.


Select the Fast Ethernet 100BaseT4 connection.


Select the Fast Ethernet 100BaseFx connection.