/*=========================================================================

  Program:   Visualization Toolkit
  Module:    $RCSfile: vtkDEMReader.h,v $
  Language:  C++
  Date:      $Date: 2001/10/11 13:37:28 $
  Version:   $Revision: 1.24 $


Copyright (c) 1993-2001 Ken Martin, Will Schroeder, Bill Lorensen 
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

 * Redistributions of source code must retain the above copyright notice,
   this list of conditions and the following disclaimer.

 * Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

 * Neither name of Ken Martin, Will Schroeder, or Bill Lorensen nor the names
   of any contributors may be used to endorse or promote products derived
   from this software without specific prior written permission.

 * Modified source versions must be plainly marked as such, and must not be
   misrepresented as being the original software.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

=========================================================================*/
// .NAME vtkDEMReader - read a digital elevation model (DEM) file
// .SECTION Description
// vtkDEMReader reads digital elevation files and creates image data.
// Digital elevation files are produced by the
// <A HREF="http://www.usgs.org">US Geological Survey</A>. 
// A complete description of the DEM file is located at the USGS site.
// The reader reads the entire dem file and create a vtkImageData that
// contains a single scalar component that is the elevation in meters.
// The spacing is also expressed in meters. A number of get methods
// provide access to fields on the header.
#ifndef __vtkDEMReader_h
#define __vtkDEMReader_h

#include <stdio.h>
#include "vtkImageSource.h"
class VTK_IO_EXPORT vtkDEMReader : public vtkImageSource
{
public:
  static vtkDEMReader *New();
  vtkTypeMacro(vtkDEMReader,vtkImageSource);
  void PrintSelf(ostream& os, vtkIndent indent);

  // Description:
  // Specify file name of Digital Elevation Model (DEM) file
  vtkSetStringMacro(FileName);
  vtkGetStringMacro(FileName);

  // Description:
  // An ASCII description of the map
  vtkGetStringMacro(MapLabel);

  // Description:
  // Code 1=DEM-1, 2=DEM_2, ...
  vtkGetMacro(DEMLevel,int);

  // Description:
  // Code 1=regular, 2=random, reserved for future use
  vtkGetMacro(ElevationPattern,  int);

  // Description:
  // Ground planimetric reference system
  vtkGetMacro(GroundSystem,  int);

  // Description:
  // Zone in ground planimetric reference system
  vtkGetMacro(GroundZone,  int);

  // Description:
  // Map Projection parameters. All are zero.
  vtkGetVectorMacro(ProjectionParameters,float,15);

  // Description:
  // Defining unit of measure for ground planimetric coordinates throughout
  // the file. 0 = radians, 1 = feet, 2 = meters, 3 = arc-seconds.
  vtkGetMacro(PlaneUnitOfMeasure,  int);

  // Description:
  // Defining unit of measure for elevation coordinates throughout
  // the file. 1 = feet, 2 = meters
  vtkGetMacro(ElevationUnitOfMeasure,  int);

  // Description:
  // Number of sides in the polygon which defines the coverage of
  // the DEM file. Set to 4.
  vtkGetMacro(PolygonSize,  int);

  // Description:
  // Minimum and maximum elevation for the DEM. The units in the file
  // are in ElevationUnitOfMeasure. This class converts them to meters.
  vtkGetVectorMacro(ElevationBounds,float,2);

  // Description:
  // Counterclockwise angle (in radians) from the primary axis of the planimetric
  // reference to the primary axis of the DEM local reference system.
  // IGNORED BY THIS IMPLEMENTATION.
  vtkGetMacro(LocalRotation,  float);

  // Description:
  // Accuracy code for elevations. 0=unknown accuracy
  vtkGetMacro(AccuracyCode,  int);

  // Description:
  // DEM spatial resolution for x,y,z. Values are expressed in units of resolution.
  // Since elevations are read as integers, this permits fractional elevations.
  vtkGetVectorMacro(SpatialResolution,float,3);

  // Description:
  // The number of rows and columns in the DEM.
  vtkGetVectorMacro(ProfileDimension,int,2);

  // Description:
  // Reads the DEM Type A record to compute the extent, origin and
  // spacing of the image data. The number of scalar components is set
  // to 1 and the output scalar type is VTK_FLOAT. 
  void ExecuteInformation();

protected:
  vtkDEMReader();
  ~vtkDEMReader();

  vtkTimeStamp ReadHeaderTime;
  int NumberOfColumns;
  int NumberOfRows;
  int WholeExtent[6];
  char *FileName;
  char MapLabel[145];
  int DEMLevel;
  int ElevationPattern;
  int GroundSystem;
  int GroundZone;
  float ProjectionParameters[15];
  int PlaneUnitOfMeasure;
  int ElevationUnitOfMeasure;
  int PolygonSize;
  float GroundCoords[4][2];
  float ElevationBounds[2];
  float LocalRotation;
  int AccuracyCode;
  float SpatialResolution[3];
  int ProfileDimension[2];
  int ProfileSeekOffset;
  void ComputeExtentOriginAndSpacing (int extent[6], float origin[6], float spacing[6]);
  int ReadTypeARecord ();
  int ReadProfiles (vtkImageData *data);
  void ExecuteData(vtkDataObject *out);
private:
  vtkDEMReader(const vtkDEMReader&);  // Not implemented.
  void operator=(const vtkDEMReader&);  // Not implemented.
};

#endif