/*=========================================================================

  Program:   Visualization Toolkit
  Module:    $RCSfile: vtkPlaneSource.h,v $
  Language:  C++
  Date:      $Date: 2001/10/11 13:37:10 $
  Version:   $Revision: 1.48 $


Copyright (c) 1993-2001 Ken Martin, Will Schroeder, Bill Lorensen 
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

 * Redistributions of source code must retain the above copyright notice,
   this list of conditions and the following disclaimer.

 * Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

 * Neither name of Ken Martin, Will Schroeder, or Bill Lorensen nor the names
   of any contributors may be used to endorse or promote products derived
   from this software without specific prior written permission.

 * Modified source versions must be plainly marked as such, and must not be
   misrepresented as being the original software.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

=========================================================================*/
// .NAME vtkPlaneSource - create an array of quadrilaterals located in a plane
// .SECTION Description
// vtkPlaneSource creates an m x n array of quadrilaterals arranged as
// a regular tiling in a plane. The plane is defined by specifying an
// origin point, and then two other points that, together with the
// origin, define two axes for the plane. These axes do not have to be
// orthogonal - so you can create a parallelogram. (The axes must not
// be parallel.) By default, the plane is centered at the origin and
// perpendicular to the z-axis, with width and height of length 1. The
// resolution of the plane (i.e., number of subdivisions) is
// controlled by the ivars XResolution and YResolution.
//
// There are three convenience methods that allow you to easily move
// the plane.  The first, SetNormal(), allows you to specify the plane
// normal. The effect of this method is to rotate the plane around the
// center of the plane, aligning the plane normal with the specified
// normal. The second, SetCenter(), translates the center of the plane
// to the specified center point. The third method, Push(), allows you
// to translate the plane along the plane normal by the distance
// specified. (Negative Push values translate the plane in the
// negative normal direction.)  Note that the SetNormal(), SetCenter()
// and Push() methods modify the Origin, Point1, and/or Point2 ivars.

// .SECTION Caveats
// The normal to the plane will point in the direction of the cross product
// of the first axis (Origin->Point1) with the second (Origin->Point2). This
// also affects the normals to the generated polygons.

#ifndef __vtkPlaneSource_h
#define __vtkPlaneSource_h

#include "vtkPolyDataSource.h"

class VTK_GRAPHICS_EXPORT vtkPlaneSource : public vtkPolyDataSource 
{
public:
  void PrintSelf(ostream& os, vtkIndent indent);
  vtkTypeMacro(vtkPlaneSource,vtkPolyDataSource);

  // Description:
  // Construct plane perpendicular to z-axis, resolution 1x1, width
  // and height 1.0, and centered at the origin.
  static vtkPlaneSource *New();

  // Description:
  // Specify the resolution of the plane along the first axes.
  vtkSetMacro(XResolution,int);
  vtkGetMacro(XResolution,int);

  // Description:
  // Specify the resolution of the plane along the second axes.
  vtkSetMacro(YResolution,int);
  vtkGetMacro(YResolution,int);

  // Description:
  // Set the number of x-y subdivisions in the plane.
  void SetResolution(const int xR, const int yR);
  void GetResolution(int& xR,int& yR) {
    xR=this->XResolution; yR=this->YResolution;};

  // Description:
  // Specify a point defining the origin of the plane.
  vtkSetVector3Macro(Origin,float);
  vtkGetVectorMacro(Origin,float,3);

  // Description:
  // Specify a point defining the first axis of the plane.
  void SetPoint1(float x, float y, float z);
  void SetPoint1(float pnt[3]);
  vtkGetVectorMacro(Point1,float,3);

  // Description:
  // Specify a point defining the second axis of the plane.
  void SetPoint2(float x, float y, float z);
  void SetPoint2(float pnt[3]);
  vtkGetVectorMacro(Point2,float,3);

  // Description:
  // Set/Get the center of the plane. Works in conjunction with the plane 
  // normal to position the plane. Don't use this method to define the plane.
  // Instead, use it to move the plane to a new center point.
  void SetCenter(float x, float y, float z);
  void SetCenter(float center[3]);
  vtkGetVectorMacro(Center,float,3);

  // Description:
  // Set/Get the plane normal. Works in conjunction with the plane center to
  // orient the plane. Don't use this method to define the plane. Instead, use
  // it to rotate the plane around the current center point.
  void SetNormal(float nx, float ny, float nz);
  void SetNormal(float n[3]);
  vtkGetVectorMacro(Normal,float,3);

  // Description:
  // Translate the plane in the direction of the normal by the
  // distance specified.  Negative values move the plane in the
  // opposite direction.
  void Push(float distance);

protected:
  vtkPlaneSource();
  ~vtkPlaneSource() {};

  void Execute();

  int XResolution;
  int YResolution;
  float Origin[3];
  float Point1[3];
  float Point2[3];
  float Normal[3];
  float Center[3];

  int UpdatePlane(float v1[3], float v2[3]);
private:
  vtkPlaneSource(const vtkPlaneSource&);  // Not implemented.
  void operator=(const vtkPlaneSource&);  // Not implemented.
};

#endif