The October 2011 test series are for the new hydratech hydraulic cylinder with the F11-5 motor and the Kollmorgan AKM52H generator running into the resistor bank load dump.


- Oct19-2011/new cylinder 1st run.WDQ : This series of tests are a course matrix of speed and constant resistance loading.  The spring is attached but not charged.

- Oct20-2011/NoSpring Speed-Res Matrix.WDQ and NoSpring Speed-Res Matrix-2.WDQ are a finer matrix of speed and constant resistance loading.  The spring is not charged.

- Oct20-2011/PressureReliefTest.WDQ is a series of runs at 25 ohm loading with different pressure relief valve settings.  In order they are.  1 turn, 2 turns, 3 turns, 4 turns, 3.5 turns.


- Oct24-2011/Spring-SineWaves.WDQ  :  These are several sine wave patterns at different loadings with the spring charged to about 1700lbs/m

- Oct25-2011/SpringTests2.WDQ  :  These are several sine wave patterns at different loadings with the spring charged to about 1700lbs/m.  Repeat of the similar Oct 24 test with the test machine gas return can fully discharged.

- Oct25-2011/PressureReliefTest.WDQ  :  This is a test of the pressure relief valve.  Four sine wave oscillatios are performed at each pressure relief valve setting, which is changed by 1/4 turn after each run.