/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkTensorGlyph.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
// .NAME vtkTensorGlyph - scale and orient glyph(s) according to tensor eigenvalues and eigenvectors
// .SECTION Description
// vtkTensorGlyph is a filter that copies a geometric representation
// (specified as polygonal data) to every input point. The geometric
// representation, or glyph, can be scaled and/or rotated according to
// the tensor at the input point. Scaling and rotation is controlled
// by the eigenvalues/eigenvectors of the tensor as follows. For each
// tensor, the eigenvalues (and associated eigenvectors) are sorted to
// determine the major, medium, and minor eigenvalues/eigenvectors.
//
// If the boolean variable ThreeGlyphs is not set the major eigenvalue 
// scales the glyph in the x-direction, the medium in the y-direction, 
// and the minor in the  z-direction. Then, the glyph is rotated so 
// that the glyph's local x-axis lies along the major eigenvector, 
// y-axis along the medium eigenvector, and z-axis along the minor. 
//
// If the boolean variable ThreeGlyphs is set three glyphs are produced, 
// each of them oriented along an eigenvector and scaled according to the 
// corresponding eigenvector.
//
// If the boolean variable Symmetric is set each glyph is mirrored (2 or 6 
// glyphs will be produced)
//
// The x-axis of the source glyph will correspond to the eigenvector 
// on output. Point (0,0,0) in the source will be placed in the data point.
// Variable Length will normally correspond to the distance from the 
// origin to the tip of the source glyph along the x-axis, 
// but can be changed to produce other results when Symmetric is on,
// e.g. glyphs that do not touch or that overlap.
//
// Please note that when Symmetric is false it will generally be better 
// to place the source glyph from (-0.5,0,0) to (0.5,0,0), i.e. centred
// at the origin. When symmetric is true the placement from (0,0,0) to
// (1,0,0) will generally be more convenient.
//
// A scale factor is provided to control the amount of scaling. Also, you 
// can turn off scaling completely if desired. The boolean variable 
// ClampScaling controls the maximum scaling (in conjunction with
// MaxScaleFactor.) This is useful in certain applications where 
// singularities or large order of magnitude differences exist in 
// the eigenvalues.
//
// If the boolean variable ColorGlyphs is set to true the glyphs are
// colored.  The glyphs can be colored using the input scalars
// (SetColorModeToScalars), which is the default, or colored using the
// eigenvalues (SetColorModeToEigenvalues).
//
// Another instance variable, ExtractEigenvalues, has been provided to
// control extraction of eigenvalues/eigenvectors. If this boolean is
// false, then eigenvalues/eigenvectors are not extracted, and the
// columns of the tensor are taken as the eigenvectors (the norm of
// column, always positive, is the eigenvalue).  This allows
// additional capability over the vtkGlyph3D object. That is, the
// glyph can be oriented in three directions instead of one.

// .SECTION Thanks
// Thanks to Jose Paulo Moitinho de Almeida for enhancements.

// .SECTION See Also
// vtkGlyph3D vtkPointLoad vtkHyperStreamline

#ifndef __vtkTensorGlyph_h
#define __vtkTensorGlyph_h

#include "vtkPolyDataAlgorithm.h"

class VTK_GRAPHICS_EXPORT vtkTensorGlyph : public vtkPolyDataAlgorithm
{
public:
  vtkTypeMacro(vtkTensorGlyph,vtkPolyDataAlgorithm);
  void PrintSelf(ostream& os, vtkIndent indent);

  // Description
  // Construct object with scaling on and scale factor 1.0. Eigenvalues are 
  // extracted, glyphs are colored with input scalar data, and logarithmic
  // scaling is turned off.
  static vtkTensorGlyph *New();

  // Description:
  // Specify the geometry to copy to each point. Old style. See
  // SetSourceConnection.
  void SetSource(vtkPolyData *source);
  vtkPolyData *GetSource();

  // Description:
  // Specify a source object at a specified table location. New style.
  // Source connection is stored in port 1. This method is equivalent
  // to SetInputConnection(1, id, outputPort).
  void SetSourceConnection(int id, vtkAlgorithmOutput* algOutput);
  void SetSourceConnection(vtkAlgorithmOutput* algOutput)
    {
      this->SetSourceConnection(0, algOutput);
    }

  // Description:
  // Turn on/off scaling of glyph with eigenvalues.
  vtkSetMacro(Scaling,int);
  vtkGetMacro(Scaling,int);
  vtkBooleanMacro(Scaling,int);

  // Description:
  // Specify scale factor to scale object by. (Scale factor always affects
  // output even if scaling is off.)
  vtkSetMacro(ScaleFactor,double);
  vtkGetMacro(ScaleFactor,double);

  // Description:
  // Turn on/off drawing three glyphs
  vtkSetMacro(ThreeGlyphs,int);
  vtkGetMacro(ThreeGlyphs,int);
  vtkBooleanMacro(ThreeGlyphs,int);

  // Description:
  // Turn on/off drawing a mirror of each glyph
  vtkSetMacro(Symmetric,int);
  vtkGetMacro(Symmetric,int);
  vtkBooleanMacro(Symmetric,int);

  // Description:
  // Set/Get the distance, along x, from the origin to the end of the 
  // source glyph. It is used to draw the symmetric glyphs.
  vtkSetMacro(Length,double);
  vtkGetMacro(Length,double);

  // Description:
  // Turn on/off extraction of eigenvalues from tensor.
  vtkSetMacro(ExtractEigenvalues,int);
  vtkBooleanMacro(ExtractEigenvalues,int);
  vtkGetMacro(ExtractEigenvalues,int);

  // Description:
  // Turn on/off coloring of glyph with input scalar data or
  // eigenvalues. If false, or input scalar data not present, then the
  // scalars from the source object are passed through the filter.
  vtkSetMacro(ColorGlyphs,int);
  vtkGetMacro(ColorGlyphs,int);
  vtkBooleanMacro(ColorGlyphs,int);

//BTX
  enum
  {
      COLOR_BY_SCALARS,
      COLOR_BY_EIGENVALUES
  };
//ETX

  // Description:
  // Set the color mode to be used for the glyphs.  This can be set to
  // use the input scalars (default) or to use the eigenvalues at the
  // point.  If ThreeGlyphs is set and the eigenvalues are chosen for
  // coloring then each glyph is colored by the corresponding
  // eigenvalue and if not set the color corresponding to the largest
  // eigenvalue is chosen.  The recognized values are:
  // COLOR_BY_SCALARS = 0 (default)
  // COLOR_BY_EIGENVALUES = 1
  vtkSetClampMacro(ColorMode, int, COLOR_BY_SCALARS, COLOR_BY_EIGENVALUES);
  vtkGetMacro(ColorMode, int);
  void SetColorModeToScalars()
    {this->SetColorMode(COLOR_BY_SCALARS);};
  void SetColorModeToEigenvalues()
    {this->SetColorMode(COLOR_BY_EIGENVALUES);};  

  // Description:
  // Turn on/off scalar clamping. If scalar clamping is on, the ivar
  // MaxScaleFactor is used to control the maximum scale factor. (This is
  // useful to prevent uncontrolled scaling near singularities.)
  vtkSetMacro(ClampScaling,int);
  vtkGetMacro(ClampScaling,int);
  vtkBooleanMacro(ClampScaling,int);

  // Description:
  // Set/Get the maximum allowable scale factor. This value is compared to the
  // combination of the scale factor times the eigenvalue. If less, the scale
  // factor is reset to the MaxScaleFactor. The boolean ClampScaling has to 
  // be "on" for this to work.
  vtkSetMacro(MaxScaleFactor,double);
  vtkGetMacro(MaxScaleFactor,double);

protected:
  vtkTensorGlyph();
  ~vtkTensorGlyph();

  virtual int RequestUpdateExtent(vtkInformation *,  vtkInformationVector **, vtkInformationVector *);
  virtual int RequestData(vtkInformation *, vtkInformationVector **, vtkInformationVector *);
  virtual int FillInputPortInformation(int port, vtkInformation *info);

  int Scaling; // Determine whether scaling of geometry is performed
  double ScaleFactor; // Scale factor to use to scale geometry
  int ExtractEigenvalues; // Boolean controls eigenfunction extraction
  int ColorGlyphs; // Boolean controls coloring with input scalar data
  int ColorMode; // The coloring mode to use for the glyphs.
  int ClampScaling; // Boolean controls whether scaling is clamped.
  double MaxScaleFactor; // Maximum scale factor (ScaleFactor*eigenvalue)
  int ThreeGlyphs; // Boolean controls drawing 1 or 3 glyphs
  int Symmetric; // Boolean controls drawing a "mirror" of each glyph
  double Length; // Distance, in x, from the origin to the end of the glyph
private:
  vtkTensorGlyph(const vtkTensorGlyph&);  // Not implemented.
  void operator=(const vtkTensorGlyph&);  // Not implemented.
};

#endif