/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkTecplotReader.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/

/*****************************************************************************
*
* Copyright (c) 2000 - 2009, Lawrence Livermore National Security, LLC
* Produced at the Lawrence Livermore National Laboratory
* LLNL-CODE-400124
* All rights reserved.
*
* This file was adapted from the ASCII Tecplot reader of VisIt. For  details,
* see https://visit.llnl.gov/.  The full copyright notice is contained in the
* file COPYRIGHT located at the root of the VisIt distribution or at 
* http://www.llnl.gov/visit/copyright.html.
*
*****************************************************************************/

// .NAME vtkTecplotReader - A concrete class to read an ASCII Tecplot file.
//
// .SECTION Description
//  vtkTecplotReader parses an ASCII Tecplot file to get a vtkMultiBlockDataSet
//  object made up of several vtkDataSet objects, of which each is of type
//  either vtkStructuredGrid or vtkUnstructuredGrid. Each vtkDataSet object 
//  maintains the geometry, topology, and some associated attributes describing
//  physical properties.
//
//  Tecplot treats 3D coordinates (only one or two coordinates might be
//  explicitly specified in a file) as varaibles too, whose names (e.g.,
//  'X' / 'x' / 'I', 'Y' / 'y' / 'J', 'Z' / 'z' / 'K') are provided in the
//  variables list (the 'VARIABLES' section). These names are then followed
//  in the list by those of other traditional variables or attributes (node-
//  based and / or cell-based data with the mode specified via token 'VAR
//  LOCATION', to be extracted to create vtkPointData and / or vtkCellData). 
//  Each zone described afterwards (in the 'ZONE's section) provides the 
//  specific values of the aforementioned variables (including 3D coordinates), 
//  in the same order as indicated by the variable-names list, through either
//  POINT-packing (i.e., tuple-based storage) or BLOCK-packing (component-based
//  storage). In particular, the first / description line of  each zone tells 
//  the type of all the  constituent cells as the connectivity / topology 
//  information. In other words, the entire dataset is made up of multiple zones
//  (blocks), of which each maintains a set of cells of the same type ('BRICK', 
//  'TRIANGLE', 'QUADRILATERAL', 'TETRAHEDRON', and 'POINT' in Tecplot terms). 
//  In addition, the description line of each zone specifies the zone name, 
//  dimensionality information (size of each dimension for a structured zone), 
//  number of nodes, and number of cells. Information about the file format is 
//  available at http://download.tecplot.com/360/dataformat.pdf.
//  
// .SECTION Caveats
//  vtkTecplotReader is currently a simplified ASCII Tecplot reader and some 
//  functionalities (e.g., extraction of sections 'GEOMETRY', 'TEXT', and 'DATA
//  SETAUXDATA', access to multiple time steps, in addition to the construction
//  of vtkRectilinearGrid and vtkImageData objects) are not supported. 
//
// .SECTION Thanks
//  This class is a VTK implementation of VisIt's ASCII Tecplot reader.
//  
// .SECTION See Also
//  vtkPoints vtkStructuredGrid vtkUnstructuredGrid vtkPointData vtkCellData
//  vtkDataSet vtkMultiBlockDataSet

#ifndef __vtkTecplotReader_h
#define __vtkTecplotReader_h

#include "vtkMultiBlockDataSetAlgorithm.h"

//BTX
#include <vector> // STL Header; Required for vector
#include <string> // STL Header; Required for string
//ETX

class vtkPoints;
class vtkCellData;
class vtkPointData;
class vtkCallbackCommand;
class vtkUnstructuredGrid;
class vtkMultiBlockDataSet;
class vtkDataArraySelection;
class vtkTecplotReaderInternal;

class VTK_IO_EXPORT vtkTecplotReader : public vtkMultiBlockDataSetAlgorithm
{
public:
  static vtkTecplotReader * New();
  vtkTypeMacro( vtkTecplotReader, vtkMultiBlockDataSetAlgorithm );
  void  PrintSelf( ostream & os, vtkIndent indent );
  
  // Description:
  // Get the number of all variables (including 3D coordinates).
  vtkGetMacro( NumberOfVariables, int );
  
  // Description:
  // Specify a Tecplot ASCII file for data loading.
  void  SetFileName( const char * fileName );
  
  // Description:
  // Get the Tecplot data title.
  const char * GetDataTitle();
  
  // Description:
  // Get the number of blocks (i.e., zones in Tecplot terms).
  int   GetNumberOfBlocks();
  
  // Description:
  // Get the name of a block specified by a zero-based index. NULL is returned
  // for an invalid block index.
  const char * GetBlockName( int blockIdx );
  
  // Description:
  // Get the number of standard data attributes (node-based and cell-based),
  // excluding 3D coordinates.
  int   GetNumberOfDataAttributes(); 
  
  // Description:
  // Get the name of a zero-based data attribute (not 3D coordinates). NULL is
  // returned for an invalid attribute index.
  const char * GetDataAttributeName( int attrIndx );
 
  // Description:
  // Get the type (0 for node-based and 1 for cell-based) of a specified data 
  // attribute (not 3D coordinates). -1 is returned for an invalid attribute 
  // name.
  int   IsDataAttributeCellBased( const char * attrName );
  
  // Description:
  // Get the type (0 for node-based and 1 for cell-based) of a specified data 
  // attribute (not 3D coordinates). -1 is returned for an invalid attribute
  // index.
  int   IsDataAttributeCellBased( int attrIndx );
  
  // Description:
  // Get the number of all data attributes (point data and cell data).
  int   GetNumberOfDataArrays();
  
  // Description:
  // Get the name of a data array specified by the zero-based index (arrayIdx).
  const char * GetDataArrayName( int arrayIdx );
  
  // Description:
  // Get the status of a specific data array (0: un-selected; 1: selected).
  int   GetDataArrayStatus( const char * arayName );
  
  // Description:
  // Set the status of a specific data array (0: de-select; 1: select) specified
  // by the name.
  void  SetDataArrayStatus( const char * arayName, int bChecked ); 
  
protected:
  vtkTecplotReader();
  ~vtkTecplotReader();
  
  virtual int FillOutputPortInformation( int port, vtkInformation * info );
  virtual int RequestInformation( vtkInformation * request, 
                                  vtkInformationVector ** inputVector, 
                                  vtkInformationVector  * outputVector );
  virtual int RequestData
          ( vtkInformation *, vtkInformationVector **, vtkInformationVector * );
            
  // Description:                      
  // A callback function registered with the selection observer.
  static  void SelectionModifiedCallback
          ( vtkObject *, unsigned long, void * tpReader, void * );
  
  // Description:
  // This function initializes the context. Note that the Tecplot file name
  // must NOT be addressed (either specified or inited) in this function. It
  // is addressed in constructor, destructor, and SetTecplotFile() only.
  void    Init();
  
  // Description:
  // Get the data arrays list from the tecplot file header.
  void    GetDataArraysList();
  
  // Description:
  // This function, the data loading engine, parses the Tecplot file to fill
  // a vtkMultiBlockDataSet object. 
  void    ReadFile( vtkMultiBlockDataSet * multZone);
  
  // Description:
  // This function extracts each variable array from a block-packing (component-
  // based) zone and collects the 3D point coordinates in addition to data 
  // attributes (node-based and / or cell-based). Note that Tecplot treats 3D 
  // coordinates as variables too, though three special ones.
  void    GetArraysFromBlockPackingZone( int numNodes, int numCells, 
          vtkPoints * theNodes, vtkPointData * nodeData, vtkCellData * cellData );
  
  // Description:
  // This function extracts each variable array from a point-packing (tuple-
  // based) zone and collects the 3D point coordbinates in addition to data 
  // attributes (node-based and / or cell-based). Note that Tecplot treats 3D 
  // coordinates as variables too, though three special ones. A point-packing 
  // zone does not contain any cell data at all, instead it is supposed to 
  // contain point data only, if any.
  void    GetArraysFromPointPackingZone
          ( int numNodes, vtkPoints * theNodes, vtkPointData * nodeData );
  
  // Description:
  // This function creates a vtkStructuredGrid object made up of a set of 
  // points and the associated attributes (node-based and / or cell-based) 
  // extracted from a block-packing (i.e., component-based) zone. This 
  // vtkStructuredGrid is then inserted, with a specified zone name, to a 
  // vtkMultiBlockDataSet object.
  void    GetStructuredGridFromBlockPackingZone( int iDimSize, int jDimSize,
          int kDimSize, int zoneIndx, const char * zoneName, 
          vtkMultiBlockDataSet * multZone );
            
  // Description:
  // This function creates a vtkStructuredGrid object made up of a set of 
  // points and the associated attributes (node-based and / or cell-based)
  // extracted from a point-packing (i.e., tuple-based) zone. This 
  // vtkStructuredGrid is then inserted, with a specified zone name, to a 
  // vtkMultiBlockDataSet object.
  void    GetStructuredGridFromPointPackingZone( int iDimSize, int jDimSize, 
          int kDimSize, int zoneIndx, const char * zoneName, 
          vtkMultiBlockDataSet * multZone );
            
  // Description:
  // This function creates a vtkUnstructuredGrid object made up of a set of
  // points and the associated attributes (node-based and / or cell-based) 
  // extracted from a block-packing (i.e., component-based) zone. This 
  // vtkUnstructuredGrid is then inserted, with a specified zone name, to a 
  // vtkMultiBlockDataSet object.
  void    GetUnstructuredGridFromBlockPackingZone( int numNodes, int numCells, 
          const char * cellType, int zoneIndx, const char * zoneName, 
          vtkMultiBlockDataSet * multZone );
            
  // Description:
  // This function creates a vtkUnstructuredGrid object made up of a set of
  // points and the associated attributes (node-based and / or cell-based) 
  // extracted from a point-packing (i.e., tuple-based) zone. This 
  // vtkUnstructuredGrid is then inserted, with a specified zone name, to a 
  // vtkMultiBlockDataSet object.
  void    GetUnstructuredGridFromPointPackingZone( int numNodes, int numCells, 
          const char * cellType,int zoneIndx, const char * zoneName, 
          vtkMultiBlockDataSet * multZone );
  
  // Description:
  // This function fills an allocated vtkUnstructuredGrid object with numberCells
  // cells of type cellTypeStr to define the grid topology.
  void    GetUnstructuredGridCells( int numberCells, const char * cellTypeStr, 
          vtkUnstructuredGrid * unstrctGrid );
         
  int     NumberOfVariables;
  char *  FileName;
  vtkCallbackCommand       *        SelectionObserver;
  vtkDataArraySelection    *        DataArraySelection;
  vtkTecplotReaderInternal *        Internal;
  
  //BTX
  std::string                    DataTitle;
  std::vector< int >             CellBased;
  std::vector< std::string >  ZoneNames;
  std::vector< std::string >  Variables;
  //ETX
  
private:
  
  vtkTecplotReader( const vtkTecplotReader & );  // Not implemented.
  void operator = ( const vtkTecplotReader & );  // Not implemented.
};

#endif