/* * Copyright (c) 2005 Sandia Corporation. Under the terms of Contract * DE-AC04-94AL85000 with Sandia Corporation, the U.S. Governement * retains certain rights in this software. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * * Neither the name of Sandia Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /***************************************************************************** * * expmp - ex_put_attr_param * * entry conditions - * input parameters: * int exoid exodus file id * int obj_type block/set type (node, edge, face, elem) * int obj_id block/set id (ignored for NODAL) * int num_attrs number of attributes * * exit conditions - * * *****************************************************************************/ #include "exodusII.h" #include "exodusII_int.h" /*! * defines the number of attributes. * \param exoid exodus file id * \param obj_type block/set type (node, edge, face, elem) * \param obj_id block/set id (ignored for NODAL) * \param num_attrs number of attributes */ int ex_put_attr_param (int exoid, ex_entity_type obj_type, int obj_id, int num_attrs) { int status; int dims[2]; int strdim, varid; char errmsg[MAX_ERR_LENGTH]; const char *dnumobjent; const char *dnumobjatt; const char *vobjatt; const char *vattnam; int numobjentdim; int obj_id_ndx; int numattrdim; /* Determine index of obj_id in obj_type id array */ if (obj_type == EX_NODAL) obj_id_ndx = 0; else { obj_id_ndx = ex_id_lkup(exoid,obj_type,obj_id); if (exerrval != 0) { if (exerrval == EX_NULLENTITY) { sprintf(errmsg, "Warning: no attributes found for NULL %s %d in file id %d", ex_name_of_object(obj_type),obj_id,exoid); ex_err("ex_put_attr_param",errmsg,EX_MSG); return (EX_WARN); /* no attributes for this object */ } else { sprintf(errmsg, "Warning: failed to locate %s id %d in id array in file id %d", ex_name_of_object(obj_type),obj_id, exoid); ex_err("ex_put_attr_param",errmsg,exerrval); return (EX_WARN); } } } switch (obj_type) { case EX_SIDE_SET: dnumobjent = DIM_NUM_SIDE_SS(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_SS(obj_id_ndx); vobjatt = VAR_SSATTRIB(obj_id_ndx); vattnam = VAR_NAME_SSATTRIB(obj_id_ndx); break; case EX_NODE_SET: dnumobjent = DIM_NUM_NOD_NS(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_NS(obj_id_ndx); vobjatt = VAR_NSATTRIB(obj_id_ndx); vattnam = VAR_NAME_NSATTRIB(obj_id_ndx); break; case EX_EDGE_SET: dnumobjent = DIM_NUM_EDGE_ES(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_ES(obj_id_ndx); vobjatt = VAR_ESATTRIB(obj_id_ndx); vattnam = VAR_NAME_ESATTRIB(obj_id_ndx); break; case EX_FACE_SET: dnumobjent = DIM_NUM_FACE_FS(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_FS(obj_id_ndx); vobjatt = VAR_FSATTRIB(obj_id_ndx); vattnam = VAR_NAME_FSATTRIB(obj_id_ndx); break; case EX_ELEM_SET: dnumobjent = DIM_NUM_ELE_ELS(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_ELS(obj_id_ndx); vobjatt = VAR_ELSATTRIB(obj_id_ndx); vattnam = VAR_NAME_ELSATTRIB(obj_id_ndx); break; case EX_NODAL: dnumobjent = DIM_NUM_NODES; dnumobjatt = DIM_NUM_ATT_IN_NBLK; vobjatt = VAR_NATTRIB; vattnam = VAR_NAME_NATTRIB; break; case EX_EDGE_BLOCK: dnumobjent = DIM_NUM_ED_IN_EBLK(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_EBLK(obj_id_ndx); vobjatt = VAR_EATTRIB(obj_id_ndx); vattnam = VAR_NAME_EATTRIB(obj_id_ndx); break; case EX_FACE_BLOCK: dnumobjent = DIM_NUM_FA_IN_FBLK(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_FBLK(obj_id_ndx); vobjatt = VAR_FATTRIB(obj_id_ndx); vattnam = VAR_NAME_FATTRIB(obj_id_ndx); break; case EX_ELEM_BLOCK: dnumobjent = DIM_NUM_EL_IN_BLK(obj_id_ndx); dnumobjatt = DIM_NUM_ATT_IN_BLK(obj_id_ndx); vobjatt = VAR_ATTRIB(obj_id_ndx); vattnam = VAR_NAME_ATTRIB(obj_id_ndx); break; default: exerrval = EX_BADPARAM; sprintf(errmsg, "Error: Bad block type (%d) specified for file id %d", obj_type, exoid ); ex_err("ex_put_attr_param",errmsg,exerrval); return (EX_FATAL); } exerrval = 0; /* clear error code */ if ((status = nc_inq_dimid(exoid, dnumobjent, &numobjentdim)) != NC_NOERR) { exerrval = status; sprintf(errmsg, "Error: failed to locate number of entries for %s %d in file id %d", ex_name_of_object(obj_type), obj_id, exoid); ex_err("ex_put_attr_param",errmsg,exerrval); return (EX_FATAL); } /* put netcdf file into define mode */ if ((status = nc_redef (exoid)) != NC_NOERR) { exerrval = status; sprintf(errmsg,"Error: failed to place file id %d into define mode",exoid); ex_err("ex_put_attr_param",errmsg,exerrval); return (EX_FATAL); } if ((status = nc_def_dim(exoid, dnumobjatt, num_attrs, &numattrdim)) != NC_NOERR) { exerrval = status; sprintf(errmsg, "Error: failed to define number of attributes in %s %d in file id %d", ex_name_of_object(obj_type), obj_id,exoid); ex_err("ex_put_attr_param",errmsg,exerrval); goto error_ret; /* exit define mode and return */ } dims[0] = numobjentdim; dims[1] = numattrdim; if ((status = nc_def_var(exoid, vobjatt, nc_flt_code(exoid), 2, dims, &varid)) != NC_NOERR) { exerrval = status; sprintf(errmsg, "Error: failed to define attributes for %s %d in file id %d", ex_name_of_object(obj_type), obj_id,exoid); ex_err("ex_put_attr_param",errmsg,exerrval); goto error_ret; /* exit define mode and return */ } /* inquire previously defined dimensions */ if ((status = nc_inq_dimid(exoid, DIM_STR_NAME, &strdim)) != NC_NOERR) { exerrval = status; sprintf(errmsg, "Error: failed to get string length in file id %d",exoid); ex_err("ex_put_attr_param",errmsg,exerrval); return (EX_FATAL); } /* Attribute names... */ dims[0] = numattrdim; dims[1] = strdim; if ((status = nc_def_var(exoid, vattnam, NC_CHAR, 2, dims, &varid)) != NC_NOERR) { exerrval = status; sprintf(errmsg, "Error: failed to define %s attribute name array in file id %d", ex_name_of_object(obj_type), exoid); ex_err("ex_put_attr_param",errmsg,exerrval); goto error_ret; /* exit define mode and return */ } /* leave define mode */ if ((status = nc_enddef(exoid)) != NC_NOERR) { exerrval = status; sprintf(errmsg, "Error: failed to complete %s attribute parameter definition in file id %d", ex_name_of_object(obj_type), exoid); ex_err("ex_put_attr_param",errmsg,exerrval); return (EX_FATAL); } return (EX_NOERR); /* Fatal error: exit definition mode and return */ error_ret: if (nc_enddef (exoid) != NC_NOERR) { /* exit define mode */ sprintf(errmsg, "Error: failed to complete definition for file id %d", exoid); ex_err("ex_put_attr_param",errmsg,exerrval); } return (EX_FATAL); }