/*
 * Copyright (c) 2005 Sandia Corporation. Under the terms of Contract
 * DE-AC04-94AL85000 with Sandia Corporation, the U.S. Governement
 * retains certain rights in this software.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 * 
 *     * Redistributions in binary form must reproduce the above
 *       copyright notice, this list of conditions and the following
 *       disclaimer in the documentation and/or other materials provided
 *       with the distribution.  
 * 
 *     * Neither the name of Sandia Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */
/*****************************************************************************
*
* expmp - ex_put_map_param
*
* entry conditions - 
*   input parameters:
*       int     exoid                   exodus file id
*       int     num_node_maps           number of node maps
*       int     num_elem_maps           number of element maps
*
* exit conditions - 
*
*
*****************************************************************************/

#include "exodusII.h"
#include "exodusII_int.h"
#include <assert.h>
#include <stdlib.h>

/*!
 * defines the number of node and element maps. It is more efficient
 * to define both of these at the same time; however, they can be
 * defined in separate calls by setting only one of the counts to a
 * non-zero value. It is an error to redefine the number of node or
 * element maps.
 * \param exoid                   exodus file id
 * \param num_node_maps           number of node maps
 * \param num_elem_maps           number of element maps
 */

int ex_put_map_param (int   exoid,
                      int   num_node_maps,
                      int   num_elem_maps)
{
  int dim[2], dimid, strdim, varid, status;
  int var_nm_id, var_em_id;
  int i;
  char errmsg[MAX_ERR_LENGTH];

  exerrval = 0; /* clear error code */

  /* return if these have been defined before */
  if ( (num_node_maps > 0 && ((nc_inq_dimid (exoid, DIM_NUM_NM, &dimid)) == NC_NOERR)) || 
       (num_elem_maps > 0 && ((nc_inq_dimid (exoid, DIM_NUM_EM, &dimid)) == NC_NOERR)) )
    {
      exerrval = EX_MSG;
      sprintf(errmsg,
        "Error: number of maps already defined for file id %d",exoid);
      ex_err("ex_put_map_param",errmsg,exerrval);
      return (EX_FATAL);
    }

  if ( (num_node_maps > 0) || (num_elem_maps > 0) ) {

      /* inquire previously defined dimensions  */
      if ((status = nc_inq_dimid (exoid, DIM_STR_NAME, &strdim)) != NC_NOERR) {
  exerrval = status;
  sprintf(errmsg,
    "Error: failed to get string length in file id %d",exoid);
  ex_err("ex_put_map_param",errmsg,exerrval);
  return (EX_FATAL);
      }
      
      /* put file into define mode */
      if ((status = nc_redef (exoid)) != NC_NOERR) {
  exerrval = status;
  sprintf(errmsg,
    "Error: failed to put file id %d into define mode", exoid);
  ex_err("ex_put_map_param",errmsg,exerrval);
  return (EX_FATAL);
      }
      
      
      /* node maps: */
      if (num_node_maps > 0) {
  
  if ((status = nc_def_dim(exoid, DIM_NUM_NM, num_node_maps, &dimid)) != NC_NOERR)
    {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to define number of node maps in file id %d",exoid);
        ex_err("ex_put_map_param",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }

    /* node maps id array: */
    dim[0] = dimid;
    if ((status = nc_def_var(exoid, VAR_NM_PROP(1), NC_INT, 1, dim, &var_nm_id)) != NC_NOERR)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to create node maps property array in file id %d",
          exoid);
        ex_err("ex_put_map_param",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }

    /*   store property name as attribute of property array variable */
    if ((status=nc_put_att_text(exoid, var_nm_id, ATT_PROP_NAME, 3, "ID")) != NC_NOERR)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to store node map property name %s in file id %d",
          "ID",exoid);
        ex_err("ex_put_map_param",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }

    /* Node map names... */
    dim[0] = dimid;
    dim[1] = strdim;
      
    if (nc_def_var(exoid, VAR_NAME_NM, NC_CHAR, 2, dim, &varid) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
        "Error: failed to define node map name array in file id %d",exoid);
      ex_err("ex_put_map_param",errmsg,exerrval);
      goto error_ret;         /* exit define mode and return */
    }

    /* determine number of nodes */
    if ((status = nc_inq_dimid (exoid, DIM_NUM_NODES, &dimid)) != NC_NOERR) {
        exerrval = status;
        sprintf(errmsg,
          "Error: couldn't determine number of nodes in file id %d",
          exoid);
        ex_err("ex_put_node_map",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }
    
    dim[0] = dimid;
  
    /* create variable array in which to store the node maps */
    for (i=0; i < num_node_maps; i++) {
      if ((status = nc_def_var(exoid,VAR_NODE_MAP(i+1),NC_INT,1,dim,&varid)) != NC_NOERR) {
    if (status == NC_ENAMEINUSE) {
        exerrval = status;
        sprintf(errmsg,
          "Error: node map %d already defined in file id %d",
          i,exoid);
        ex_err("ex_put_node_map",errmsg,exerrval);
      } else {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to create node map %d in file id %d",
          i,exoid);
        ex_err("ex_put_node_map",errmsg,exerrval);
      }
    goto error_ret;          /* exit define mode and return */
        }
    }
  }

      /* element maps: */
      if (num_elem_maps > 0) {
  if ((status = nc_def_dim (exoid, DIM_NUM_EM, num_elem_maps,&dimid)) != NC_NOERR)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to define number of element maps in file id %d",
          exoid);
        ex_err("ex_put_map_param",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }

    /* element maps id array: */
    dim[0] = dimid;
    if ((status = nc_def_var(exoid, VAR_EM_PROP(1), NC_INT, 1, dim, &var_em_id)) != NC_NOERR)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to create element maps property array in file id %d",
          exoid);
        ex_err("ex_put_map_param",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }

    /*   store property name as attribute of property array variable */
    if ((status=nc_put_att_text(exoid, var_em_id, ATT_PROP_NAME, 3, "ID")) != NC_NOERR)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to store element map property name %s in file id %d",
          "ID",exoid);
        ex_err("ex_put_map_param",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }

    /* Element map names... */
    dim[0] = dimid;
    dim[1] = strdim;
      
    if ((status = nc_def_var(exoid, VAR_NAME_EM, NC_CHAR, 2, dim, &varid)) != NC_NOERR) {
      exerrval = status;
      sprintf(errmsg,
        "Error: failed to define element map name array in file id %d",exoid);
      ex_err("ex_put_map_param",errmsg,exerrval);
      goto error_ret;         /* exit define mode and return */
    }

    /* determine number of elements */
    if ((status = nc_inq_dimid(exoid, DIM_NUM_ELEM, &dimid)) != NC_NOERR)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: couldn't determine number of elements in file id %d",
          exoid);
        ex_err("ex_put_elem_map",errmsg,exerrval);
        goto error_ret;         /* exit define mode and return */
      }
  
    /* create variable array in which to store the element maps */
    dim[0] = dimid;
    for (i = 0; i < num_elem_maps; i++) {
      if ((status = nc_def_var(exoid,VAR_ELEM_MAP(i+1),NC_INT,1,dim, &varid)) != NC_NOERR)
        {
    if (status == NC_ENAMEINUSE)
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: element map %d already defined in file id %d",
          i,exoid);
        ex_err("ex_put_elem_map",errmsg,exerrval);
      }
    else
      {
        exerrval = status;
        sprintf(errmsg,
          "Error: failed to create element map %d in file id %d",
          i,exoid);
        ex_err("ex_put_elem_map",errmsg,exerrval);
      }
    goto error_ret;          /* exit define mode and return */
        }
    }
  }

      /* leave define mode */
      if ((status = nc_enddef (exoid)) != NC_NOERR) {
  exerrval = status;
  sprintf(errmsg,
    "Error: failed to complete variable definitions in file id %d",exoid);
  ex_err("ex_put_map_param",errmsg,exerrval);
  return (EX_FATAL);
      }

      /* Fill the id arrays with EX_INVALID_ID */
      {
  int maxset = num_node_maps > num_elem_maps ? num_node_maps : num_elem_maps;
  int *invalid_ids = malloc(maxset*sizeof(int));
  for (i=0; i < maxset; i++) {
    invalid_ids[i] = EX_INVALID_ID;
  }
  if (num_node_maps > 0) {
    status = nc_put_var_int(exoid, var_nm_id, invalid_ids);
    assert(status == NC_NOERR);
  }
  if (num_elem_maps > 0) {
    status = nc_put_var_int(exoid, var_em_id, invalid_ids);
    assert(status == NC_NOERR);
  }
  free(invalid_ids);
      }
    }

  return (EX_NOERR);

  /* Fatal error: exit definition mode and return */
 error_ret:
  if (nc_enddef (exoid) != NC_NOERR)     /* exit define mode */
    {
      sprintf(errmsg,
        "Error: failed to complete definition for file id %d",
        exoid);
      ex_err("ex_put_map_param",errmsg,exerrval);
    }
  return (EX_FATAL);
}