/*=========================================================================
  
Program:   Visualization Toolkit
Module:    vtkParallelCoordinatesHistogramRepresentation.cxx

Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
All rights reserved.
See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

This software is distributed WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
/*-------------------------------------------------------------------------
  Copyright 2009 Sandia Corporation.
  Under the terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
  the U.S. Government retains certain rights in this software.
-------------------------------------------------------------------------*/
#include "vtkParallelCoordinatesHistogramRepresentation.h"
//------------------------------------------------------------------------------
#include "vtkActor2D.h"
#include "vtkArrayIteratorIncludes.h"
#include "vtkCellArray.h"
#include "vtkCellData.h"
#include "vtkComputeHistogram2DOutliers.h"
#include "vtkDoubleArray.h"
#include "vtkExtractSelectedPolyDataIds.h"
#include "vtkExtractHistogram2D.h"
#include "vtkFloatArray.h"
#include "vtkIdList.h"
#include "vtkImageData.h"
#include "vtkImageGaussianSmooth.h"
#include "vtkImageMedian3D.h"
#include "vtkInformation.h"
#include "vtkInformationVector.h"
#include "vtkLookupTable.h"
#include "vtkMath.h"
#include "vtkMultiBlockDataSet.h"
#include "vtkObjectFactory.h"
#include "vtkPairwiseExtractHistogram2D.h"
#include "vtkPointData.h"
#include "vtkPoints.h"
#include "vtkPolyData.h"
#include "vtkPolyDataMapper2D.h"
#include "vtkPropCollection.h"
#include "vtkProperty2D.h"
#include "vtkRenderer.h"
#include "vtkRenderView.h"
#include "vtkSCurveSpline.h"
#include "vtkSelection.h"
#include "vtkSelectionNode.h"
#include "vtkStringArray.h"
#include "vtkTable.h"
#include "vtkUnsignedIntArray.h"
#include "vtkViewTheme.h"
//------------------------------------------------------------------------------
vtkStandardNewMacro(vtkParallelCoordinatesHistogramRepresentation);
//------------------------------------------------------------------------------
vtkParallelCoordinatesHistogramRepresentation::vtkParallelCoordinatesHistogramRepresentation()
{
  this->SetNumberOfInputPorts(vtkParallelCoordinatesHistogramRepresentation::NUM_INPUT_PORTS);

  this->UseHistograms = 0;

  this->HistogramFilter = vtkSmartPointer<vtkPairwiseExtractHistogram2D>::New();
  this->HistogramFilter->SetInputConnection(this->InputArrayTable->GetProducerPort());

  this->HistogramLookupTable = vtkSmartPointer<vtkLookupTable>::New();
  this->HistogramLookupTable->SetAlphaRange(0,1);
  this->HistogramLookupTable->SetHueRange(1,1);
  this->HistogramLookupTable->SetValueRange(1,1);
  this->HistogramLookupTable->SetSaturationRange(0,0);
  this->HistogramLookupTable->ForceBuild();

  this->PlotMapper->SetScalarModeToUseCellData();
  this->PlotMapper->UseLookupTableScalarRangeOn();  
  this->PlotMapper->SetLookupTable(this->HistogramLookupTable);
  this->PlotMapper->ScalarVisibilityOff();

  this->ShowOutliers = 0;

  this->OutlierFilter = vtkSmartPointer<vtkComputeHistogram2DOutliers>::New();
  this->OutlierFilter->SetInputConnection(vtkComputeHistogram2DOutliers::INPUT_TABLE_DATA,
                                         this->InputArrayTable->GetProducerPort());
//                                          this->HistogramFilter->GetOutputPort(vtkPairwiseExtractHistogram2D::REORDERED_INPUT));
  this->OutlierFilter->SetInputConnection(vtkComputeHistogram2DOutliers::INPUT_HISTOGRAMS_MULTIBLOCK,
                                          this->HistogramFilter->GetOutputPort(vtkPairwiseExtractHistogram2D::HISTOGRAM_IMAGE));

  this->OutlierData = vtkSmartPointer<vtkPolyData>::New();
  this->OutlierActor = vtkSmartPointer<vtkActor2D>::New();
  this->OutlierActor->GetProperty()->SetColor(1,1,1);
  this->OutlierMapper = vtkSmartPointer<vtkPolyDataMapper2D>::New();
  this->OutlierMapper.TakeReference(this->InitializePlotMapper(this->OutlierData,this->OutlierActor));

  this->SetHistogramLookupTableRange(0,10);
  this->SetPreferredNumberOfOutliers(100);
  this->SetNumberOfHistogramBins(10,10);

  // Apply default theme
  // you would think that calling this in the superclass would take care of it,
  // but it turns out that the superclass constructor will only call its own 
  // version there.  So I have to call it again to make sure that the local
  // version gets called.
  vtkViewTheme* theme = vtkViewTheme::New();
  theme->SetCellOpacity(1.0);
  theme->SetCellColor(1.0,1.0,1.0);
  theme->SetEdgeLabelColor(1.0,.8,.3);
  this->ApplyViewTheme(theme);
  theme->Delete();
}
//------------------------------------------------------------------------------
vtkParallelCoordinatesHistogramRepresentation::~vtkParallelCoordinatesHistogramRepresentation()
{
}
//------------------------------------------------------------------------------
// Histogram quad color is defined by theme->CellColor
void vtkParallelCoordinatesHistogramRepresentation::ApplyViewTheme(vtkViewTheme* theme)
{
  this->Superclass::ApplyViewTheme(theme);

  double *c = theme->GetCellColor();
  double hsv[3] = {0,0,0};
  vtkMath::RGBToHSV(c,hsv);
  this->HistogramLookupTable->SetHueRange(hsv[0],hsv[0]);
  this->HistogramLookupTable->SetSaturationRange(hsv[1],hsv[1]);
  this->HistogramLookupTable->SetValueRange(hsv[2],hsv[2]);
  this->HistogramLookupTable->ForceBuild();
}
//------------------------------------------------------------------------------
// Make sure all of the histogram/outlier stuff is up-to-date.  Also, if not using
// histograms, make sure that lookup table for the plot data mapper is
// disabled, since that's the behavior for the parent class.
int vtkParallelCoordinatesHistogramRepresentation::ComputeDataProperties()
{
  if (!this->Superclass::ComputeDataProperties())
    return 0;

  if (this->UseHistograms)
    {
    this->GetHistogramImage(0);
    this->SetHistogramLookupTableRange(0,this->HistogramFilter->GetMaximumBinCount());
    this->HistogramLookupTable->SetRange(this->HistogramLookupTableRange[0],this->HistogramLookupTableRange[1]);
    this->PlotMapper->ScalarVisibilityOn();
    }
  else
    {
    this->PlotMapper->ScalarVisibilityOff();
    }

  if (this->ShowOutliers)
    {
    this->OutlierActor->VisibilityOn();
    }
  else
    {
    this->OutlierActor->VisibilityOff();
    }

  return 1;
}
//------------------------------------------------------------------------------
// outliers have the same properties as plot lines.
int vtkParallelCoordinatesHistogramRepresentation::UpdatePlotProperties(vtkStringArray* inputTitles)
{
  if (!this->Superclass::UpdatePlotProperties(inputTitles))
    return 0;
  
  this->OutlierActor->GetProperty()->SetOpacity(this->LineOpacity);
  this->OutlierActor->GetProperty()->SetColor(this->LineColor);

  return 1;
}
//------------------------------------------------------------------------------
int vtkParallelCoordinatesHistogramRepresentation::RequestData(
  vtkInformation* request,
  vtkInformationVector** inputVector,
  vtkInformationVector* outputVector)
{
  // do everything the superclass does
  //  * histogram quad computation happens automatically since this
  //  class overrides the plotting functions.
  if (!this->Superclass::RequestData(request,inputVector,outputVector))
    return 0;

  // but also show outliers
  if (this->ShowOutliers)
    {
    vtkTable* outlierTable = this->GetOutlierData();

    if (this->UseCurves)
      {
      vtkParallelCoordinatesRepresentation::PlaceCurves(this->OutlierData,outlierTable,NULL);
      }
    else
      {
      vtkParallelCoordinatesRepresentation::PlaceLines(this->OutlierData,outlierTable,NULL);
      }

    }

  this->BuildTime.Modified();

  return 1;
}
//------------------------------------------------------------------------------
bool vtkParallelCoordinatesHistogramRepresentation::AddToView(vtkView* view)
{
  this->Superclass::AddToView(view);
  vtkRenderView* rv = vtkRenderView::SafeDownCast(view);
  if (rv)
    {
    rv->GetRenderer()->AddActor(this->OutlierActor);

    // not sure what these are for
    //rv->RegisterProgress(...);
    return true;
    }
  return false;
}
//------------------------------------------------------------------------------
bool vtkParallelCoordinatesHistogramRepresentation::RemoveFromView(vtkView* view)
{
  this->Superclass::RemoveFromView(view);
  vtkRenderView* rv = vtkRenderView::SafeDownCast(view);
  if (rv)
    {
    rv->GetRenderer()->RemoveActor(this->OutlierActor);

    // not sure what these are for
    //rv->UnRegisterProgress(this->OutlineMapper);
    return true;
    }
  return false;
}
//------------------------------------------------------------------------------
// redirect the line plotting function to the histogram plotting function,
// if histograms are enabled
int vtkParallelCoordinatesHistogramRepresentation::PlaceLines(vtkPolyData* polyData, 
                                                              vtkTable* data,
                                                              vtkIdTypeArray* idsToPlot)
{
  if (this->UseHistograms)
    {
    return this->PlaceHistogramLineQuads(polyData);
    }
  else
    {
    return this->Superclass::PlaceLines(polyData,data,idsToPlot);
    }
}
//------------------------------------------------------------------------------
// redirect the line plotting function to the histogram plotting function,
// if histograms are enabled
int vtkParallelCoordinatesHistogramRepresentation::PlaceCurves(vtkPolyData* polyData, 
                                                               vtkTable* data, 
                                                               vtkIdTypeArray* idsToPlot)
{
  if (this->UseHistograms)
    {
    return this->PlaceHistogramCurveQuads(polyData);
    }
  else
    {
    return this->Superclass::PlaceCurves(polyData,data,idsToPlot);
    }
}
//------------------------------------------------------------------------------
// this is a bit tricky.  This class plots selections as lines, regardless
// of whether or not histograms are enabled.  That means it needs to explicitly
// call the superclass plotting functions on the selection so that the 
// histogram plotting functions don't get used.
int vtkParallelCoordinatesHistogramRepresentation::PlaceSelection(vtkPolyData* polyData, 
                                                                  vtkTable* data,
                                                                  vtkSelectionNode* selectionNode)
{
  vtkIdTypeArray* selectedIds = vtkIdTypeArray::SafeDownCast(selectionNode->GetSelectionList());
  if (!selectedIds)
    return 1;

  if (this->UseCurves)
    {
    this->Superclass::PlaceCurves(polyData,data,selectedIds);
    }
  else
    {
    this->Superclass::PlaceLines(polyData,data,selectedIds);
    }

  return 1;
}
//------------------------------------------------------------------------------
int vtkParallelCoordinatesHistogramRepresentation::PlaceHistogramLineQuads(vtkPolyData* polyData)
{
  // figure out how many samples there are by looking at each of the 
  // histograms and counting the bins.
  int numberOfQuads = 0;
  for (int i=0; i<this->NumberOfAxes-1; i++)
    {
    vtkImageData* histogram = this->GetHistogramImage(i);
    if (histogram)
      numberOfQuads += histogram->GetPointData()->GetScalars()->GetNumberOfTuples();
    }

  if (this->UseCurves)
    numberOfQuads *= this->CurveResolution;

  this->AllocatePolyData(polyData,0,0,0,0,
                         numberOfQuads,
                         numberOfQuads*4,
                         numberOfQuads,0);

  vtkPoints* points = polyData->GetPoints();
  float* pointsp = vtkFloatArray::SafeDownCast(points->GetData())->GetPointer(0);

  vtkDoubleArray* scalars = vtkDoubleArray::SafeDownCast(polyData->GetCellData()->GetScalars());
  double* scalarsp = scalars->GetPointer(0);//vtkDoubleArray::SafeDownCast(polyData->GetCellData()->GetScalars());

  // for each histogram, draw a quad for each bin.
  vtkIdType ptId=0;
//  vtkIdType quadId=0;
  for (int pos=0; pos<this->NumberOfAxes-1; pos++)
    {
    int dims[3] = {0,0,0};
    double spacing[3] = {0,0,0};
    vtkImageData* image = this->GetHistogramImage(pos);
    if (!image)
      continue;
    image->GetDimensions(dims);
    image->GetSpacing(spacing);

    double binWidth[] = { (this->YMax-this->YMin)/static_cast<double>(dims[0]),
                          (this->YMax-this->YMin)/static_cast<double>(dims[1]) };

    double x1[3] = {0.,0.,0.};
    double x2[3] = {0.,0.,0.};
    x1[0] = this->Xs[pos];
    x2[0] = this->Xs[pos+1];

    // for each bin, draw a quad
    for (int y=0; y<dims[1]; y++)
      {
      x2[1] = this->YMin + y * binWidth[1];

      for (int x=0; x<dims[0]; x++)
        {
        x1[1] = this->YMin + x * binWidth[0];

        // the number of rows that fit into this bin
        double v = image->GetScalarComponentAsDouble(x,y,0,0);

        *(pointsp++) = x1[0]; *(pointsp++) = x1[1]+binWidth[0]; *(pointsp++) = 0.; ptId++;
        *(pointsp++) = x1[0]; *(pointsp++) = x1[1]; *(pointsp++) = 0.; ptId++;
        *(pointsp++) = x2[0]; *(pointsp++) = x2[1]; *(pointsp++) = 0.; ptId++;
        *(pointsp++) = x2[0]; *(pointsp++) = x2[1]+binWidth[1]; *(pointsp++) = 0.; ptId++;
        //      points->SetPoint(ptId++, x1[0], x1[1]+binWidth[0], 0.);
//        points->SetPoint(ptId++, x1[0], x1[1], 0.);
//        points->SetPoint(ptId++, x2[0], x2[1], 0.);
//        points->SetPoint(ptId++, x2[0], x2[1]+binWidth[1], 0.);

        // scalars used for lookup table mapping.  More rows
        // in a bin means bright quad.
        //scalars->SetTuple1(quadId++,v);
        *(scalarsp++) = v;//->SetTuple1(quadId++,v);
        }
      }
    }

  polyData->Modified();
  return 1;
}
//------------------------------------------------------------------------------
int vtkParallelCoordinatesHistogramRepresentation::PlaceHistogramCurveQuads(vtkPolyData* polyData)
{
  // figure out how many samples there are by looking at each of the 
  // histograms and counting the bins.
  int numberOfStrips = 0;
  for (int i=0; i<this->NumberOfAxes-1; i++)
    {
    vtkImageData* histogram = this->GetHistogramImage(i);
    if (histogram)
      numberOfStrips += histogram->GetPointData()->GetScalars()->GetNumberOfTuples();
    }

  int numberOfPointsPerStrip = this->CurveResolution * 2;

  this->AllocatePolyData(polyData,0,0,
                         numberOfStrips,numberOfPointsPerStrip,0,
                         numberOfStrips*numberOfPointsPerStrip,
                         numberOfStrips,0);

  vtkPoints *points = polyData->GetPoints();
  float* pointsp = vtkFloatArray::SafeDownCast(points->GetData())->GetPointer(0);

  vtkDoubleArray* scalars = vtkDoubleArray::SafeDownCast(polyData->GetCellData()->GetScalars());
  double* scalarsp = scalars->GetPointer(0);
  
  // build the default spline
  vtkSmartPointer<vtkDoubleArray> defSplineValues = vtkSmartPointer<vtkDoubleArray>::New();
  this->BuildDefaultSCurve(defSplineValues,this->CurveResolution);

  vtkIdType ptId=0;
  //vtkIdType stripId = 0;
  for (int pos=0; pos<this->NumberOfAxes-1; pos++)
    {
    int dims[3] = {0,0,0};
    double spacing[3] = {0,0,0};
    vtkImageData* image = this->GetHistogramImage(pos);
    if (!image)
      continue;
    image->GetDimensions(dims);
    image->GetSpacing(spacing);

    double binWidth[] = { (this->YMax-this->YMin)/static_cast<double>(dims[0]),
                          (this->YMax-this->YMin)/static_cast<double>(dims[1]) };


    double x1[3] = {0.,0.,0.};
    double x2[3] = {0.,0.,0.};
    double xc[3] = {0.,0.,0.};
    double w = 0.0;

    x1[0] = this->Xs[pos];
    x2[0] = this->Xs[pos+1];
    
    double dx = (x2[0]-x1[0]) / static_cast<double>(this->CurveResolution-1);
    double dw = binWidth[1] - binWidth[0];

    for (int y=0; y<dims[1]; y++)
      {
      x2[1] = this->YMin + y * binWidth[1];

      for (int x=0; x<dims[0]; x++)
        {
        x1[1] = this->YMin + x * binWidth[0];

        double v = image->GetScalarComponentAsDouble(x,y,0,0);
        double dy = x2[1] - x1[1];

        for (int c=0; c<this->CurveResolution; c++)
          {
          xc[0] = this->Xs[pos] + dx*c;
          xc[1] = defSplineValues->GetValue(c)*dy + x1[1];//spline->Evaluate(x1[0]);//spline->Evaluate(x1[0]);
          w = defSplineValues->GetValue(c)*dw + binWidth[0];//bwspline->Evaluate(x1[0]);

//          points->SetPoint(ptId++,   xc[0], xc[1]+w, 0.);
//          points->SetPoint(ptId++, xc[0], xc[1], 0.);
          *(pointsp++) = xc[0]; *(pointsp++) = xc[1]+w; *(pointsp++) = 0.0; ptId++;
          *(pointsp++) = xc[0]; *(pointsp++) = xc[1]; *(pointsp++) = 0.0; ptId++;
          }

        *(scalarsp++) = v;//->SetTuple1(stripId++,v);
        }
      }
    }

  polyData->Modified();
  return 1;
}
//------------------------------------------------------------------------------
void vtkParallelCoordinatesHistogramRepresentation::PrintSelf(ostream& os, vtkIndent indent)
{
  this->Superclass::PrintSelf(os,indent);
  os << "UseHistograms: " << this->UseHistograms << endl;
  os << "HistogramLookupTableRange: "  << this->HistogramLookupTableRange[0] << ","
     << this->HistogramLookupTableRange[1] << endl;
  os << "NumberOfHistogramBins: " << this->NumberOfHistogramBins[0] << ","
     << this->NumberOfHistogramBins[1] << endl;
  os << "ShowOutliers: " << this->ShowOutliers << endl;
  os << "PreferredNumberOfOutliers: " << this->PreferredNumberOfOutliers << endl;
}
//------------------------------------------------------------------------------
int vtkParallelCoordinatesHistogramRepresentation::SwapAxisPositions(int position1, int position2)
{
  if (this->Superclass::SwapAxisPositions(position1,position2))
    {
    this->HistogramFilter->Modified();
    if (this->ShowOutliers)
      this->OutlierFilter->Modified();

    return 1;
    }
  
  return 0;
}
//------------------------------------------------------------------------------
int vtkParallelCoordinatesHistogramRepresentation::SetRangeAtPosition(int position, double range[2])
{
  if (this->Superclass::SetRangeAtPosition(position,range))
    {
    this->HistogramFilter->SetCustomColumnRange(position,range);
    this->HistogramFilter->Modified();

    if (ShowOutliers)
      this->OutlierFilter->Modified();

    return 1;
    }
  return 0;
}
//------------------------------------------------------------------------------
void vtkParallelCoordinatesHistogramRepresentation::SetUseHistograms(int use)
{
  if (use && this->UseHistograms != use)
    {
    this->HistogramFilter->Modified();

    if (this->ShowOutliers)
      this->OutlierFilter->Modified();
    }

  this->UseHistograms = use;
  this->Modified();
}
//------------------------------------------------------------------------------
void vtkParallelCoordinatesHistogramRepresentation::SetShowOutliers(int show)
{
  if (show && this->ShowOutliers != show)
    {
    this->HistogramFilter->Modified();
    this->OutlierFilter->Modified();
    }

  this->ShowOutliers = show;
  this->Modified();
}
//------------------------------------------------------------------------------
void vtkParallelCoordinatesHistogramRepresentation::SetPreferredNumberOfOutliers(int num)
{
  if (num >= 0)
    {
    this->PreferredNumberOfOutliers = num;
    this->OutlierFilter->SetPreferredNumberOfOutliers(num);
    this->Modified();
    }
}
//------------------------------------------------------------------------------
void vtkParallelCoordinatesHistogramRepresentation::SetNumberOfHistogramBins(int nx, int ny)
{
  if (nx > 0 && ny > 0)
    {
    this->NumberOfHistogramBins[0] = nx;
    this->NumberOfHistogramBins[1] = ny;
    
    this->HistogramFilter->SetNumberOfBins(nx,ny);

    this->Modified();
    }
}
//------------------------------------------------------------------------------
void vtkParallelCoordinatesHistogramRepresentation::SetNumberOfHistogramBins(int* n)
{
  this->SetNumberOfHistogramBins(n[0],n[1]);
}
//------------------------------------------------------------------------------
vtkImageData* vtkParallelCoordinatesHistogramRepresentation::GetHistogramImage(int idx)
{
  return this->HistogramFilter->GetOutputHistogramImage(idx);
}
//------------------------------------------------------------------------------
vtkTable* vtkParallelCoordinatesHistogramRepresentation::GetOutlierData()
{
  return this->OutlierFilter->GetOutputTable();
}