Here's a brief summary of where we are with OBC West B.
  1) Today we are able to communicate via a serial port to
     OBC West B clock (shore), but not to the subsea unit
  2) We subsequently hooked the OBC B to the digiport (port4) and
     are able to telnet 10.91.128.66 2004 and do a #CKBH and
     receive the help screen. [Note if you use port 2104, then you need
     to set telnet session to character mode for this to work]
  3) Comms to the subsea (#S01B or #C01B) do not work. Kevin is
     checking the fiber connections/documentation. Perhaps Fritz can touch
     base with him later today or tomorrow and work with him on this.
  4) It would be nice to see if we can take advantage of the realport
     virtual serialport for the obc/sail timing. I downloaded the Digi
     RealPort drivers (and put it in /usr/local/src/DigiRealport). The
     drivers need to be installed perhaps Pete can do this for us as it
     looks like it requires some kernel source modules that are not loaded.