Program UNIPLOT version 02.19.NL --------------- (c) Fugro Engineers bv, Leidschendam, Holland ASCII presentation of data in file :CPT017.000 ASCII file created at: date :17-Dec-2003 time :10:21:36 Project number :N4371 Date of testing :11-Dec-2003 Location :CPT017 Data of channels with an depth offset are interpolated to the depth of the cone element. Reading Depth cone friction No m MPa MPa --------------------------------------- 99 0.000 0.0000 100 0.008 0.0157 0.0801 101 0.017 0.1494 0.0922 102 0.025 1.1363 0.1021 103 0.033 1.9777 0.1130 104 0.041 2.9724 0.1722 105 0.050 3.9829 0.2661 106 0.058 3.9632 0.3097 107 0.066 3.7824 0.3212 108 0.074 5.7168 0.2926 109 0.082 8.3943 0.2855 110 0.090 8.3039 0.2987 111 0.098 6.7784 0.3257 112 0.106 6.0589 0.3539 113 0.114 6.7666 0.3632 114 0.122 9.7626 0.3655 115 0.131 10.8910 0.3946 116 0.139 11.6105 0.4199 117 0.148 12.1374 0.4356 118 0.156 11.4336 0.4369 119 0.164 11.4100 0.4403 120 0.173 13.4545 0.4456 121 0.181 13.3012 0.4582 122 0.189 12.7625 0.4599 123 0.198 13.1911 0.4562 124 0.206 14.0718 0.4658 125 0.215 13.2697 0.4688 126 0.223 12.5502 0.4856 127 0.231 12.1374 0.5221 128 0.240 12.7232 0.5754 129 0.248 13.3523 0.5975 130 0.256 13.9853 0.5894 131 0.265 15.6603 0.5307 132 0.274 15.9355 0.4662 133 0.282 17.0089 0.4318 134 0.290 17.2605 0.4054 135 0.299 15.7939 0.3765 136 0.308 13.9342 0.3835 137 0.316 11.4100 0.4359 138 0.325 11.7717 0.4989 139 0.333 12.4677 0.5518 140 0.342 12.4205 0.6003 141 0.351 16.3562 0.6300 142 0.359 18.6799 0.6404 143 0.368 19.2460 0.5879 144 0.377 19.6353 0.4837 145 0.386 19.6432 0.4398 146 0.395 19.2067 0.4410 147 0.404 18.4754 0.4805 148 0.412 17.0325 149 0.421 14.4571 150 0.430 14.8031 151 0.438 17.3391 152 0.445 25.8750 153 0.454 36.2195