Child dir "." (ino #1) of dir ino #1 appears to be a hard link VFS: Mounted root (jffs2 filesystem). Freeing init memory: 64K Setting up RAMFS, please wait... Executing /sbin/init... INIT: version 2.78 booting Mounting local filesystems... mount: tmpfs already mounted on /mnt/ramfs devpts on /dev/pts type devpts (rw,mode=0622) mount: you didn't specify a filesystem type for /dev/hda1 I will try all types mentioned in /etc/filesystems or /proc/filesystems Trying umsdos mount: /dev/hda1: unknown device mount: proc already mounted Setting the System Clock using the Hardware Clock as reference... Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Calculating module dependencies... depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/loopback.o depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/net.o depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/net_init.o done. Loading modules: slhc CSLIP: code copyright 1989 Regents of the University of California ppp_generic PPP generic driver version 2.4.1 ppp_async ppp_deflate PPP Deflate Compression module registered bsd_comp PPP BSD Compression module registered cerf89x0 cerf89x0: DEBUG negating sleep pin eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:0C:6A:00:04:15 sa1100-rtc SA1100 Real Time Clock driver v1.00 INIT: Entering runlevel: 2 Configuring network interfaces: net_open: called net_close: called net_open: called done. Starting PCMCIA services: cardmgr. Configuring sa1100_gpio gpio port: cardmgr[61]: starting, version is 3.1.22 cardmgr[61]: watching 2 sockets SA1100 GPIO v1.3 device (10,224): stencil=0x000FFFF cardmgr[61]: socket 1: ATA/IDE Fixed Disk cardmgr[61]: executing: 'modprobe ide-cs' done. Configuring sa1100_lddio lddio port: SA1100 LDDIO v1.0 device (10,225): stencil=0x0000FFF Trying to free nonexistent resource hda: LEXAR ATA FLASH, ATA DISK drive ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 43 hda: 8053920 sectors (4124 MB) w/1KiB Cache, CHS=7990/16/63 Partition check: hda:done. Configuring sa1100_s [PTBL] [998/128/63]pi spi p hda1ort: ide_cs: hda: Vcc = 3.3, Vpp = 0.0 cardmgr[61]: executing: './ide start hda' SA1100 SPI v1.3 device (10,223) cardmgr[61]: + ide.opts taking path 2 done. Configuring Exar serial ports: xr788: version [1.4 (large flipbuf) Apr 29 2004 10:35:20] base[10000000] irq[2] firstminor[0] ttySX0 at MEM 0x10000000 (irq = 2) is a 16550 ttySX1 at MEM 0x10000020 (irq = 2) is a 16550 ttySX2 at MEM 0x10000040 (irq = 2) is a 16550 ttySX3 at MEM 0x10000060 (irq = 2) is a 16550 ttySX4 at MEM 0x10000080 (irq = 2) is a 16550 ttySX5 at MEM 0x100000a0 (irq = 2) is a 16550 ttySX6 at MEM 0x100000c0 (irq = 2) is a 16550 ttySX7 at MEM 0x100000e0 (irq = 2) is a 16550 xr788: version [1.4 (large flipbuf) Apr 29 2004 10:35:20] base[10000200] irq[3] firstminor[8] ttySX8 at MEM 0x10000200 (irq = 3) is a 16550 ttySX9 at MEM 0x10000220 (irq = 3) is a 16550 ttySX10 at MEM 0x10000240 (irq = 3) is a 16550 ttySX11 at MEM 0x10000260 (irq = 3) is a 16550 ttySX12 at MEM 0x10000280 (irq = 3) is a 16550 ttySX13 at MEM 0x100002a0 (irq = 3) is a 16550 ttySX14 at MEM 0x100002c0 (irq = 3) is a 16550 ttySX15 at MEM 0x100002e0 (irq = 3) is a 16550 done. Starting system logger: Starting kernel logger: Starting OpenBSD Secure Shell server: sshd. Starting Boa webserver: boa. hda: hda1 hda: hda1 hda: hda1 Setting system date/time to 13/10/2004, 17:53:29. 13 Oct 17:51:54 ntpdate[105]: step time server 134.89.10.65 offset -94.583938 sec Starting SIAM application: skipping SIAM auto start SIAM_AUTOSTART = FALSE done. ************************************************** ** Intrinsyc Linux (I-Linux) ** ** Copyright 2001,2002 Intrinsyc Software Inc. ** ** Version: 4.4 ** ** Support: http://support.intrinsyc.com ** ************************************************** sidearm415 login: INIT: Switching to runlevel: 0 INIT: SendStopping SIAM application: done. Saving the System Clock time to the Hardware Clock... cardmgr[61]: + ide.opts configuring default,1,11043123949899090093 cardmgr[61]: + ./ide: fuser: command not found cardmgr[61]: executing: './ide stop hda' cardmgr[61]: + ide.opts configuring default,1,11043123949899090093 cardmgr[61]: + ide.opts configuring default,1,11043123949899090093,1 partition 1 cardmgr[61]: + ./ide: fuser: command not found cardmgr[61]: + /dev/hda1 umounted cardmgr[61]: executing: 'modprobe -r ide-cs' cardmgr[61]: exiting Deactivating swap... done. Unmounting local filesystems... done. net_close: called Power down. + MBARI SideARM v4 IBoot version 1.7 built on Apr 20 2004 at 15:05:38 Copyright 2001,2002 Intrinsyc Software Inc. Copyright 2004 MBARI + MBARI SideARM v4 IBoot version 1.7 built on Apr 20 2004 at 15:05:38 Copyright 2001,2002 Intrinsyc Software Inc. Copyright 2004 MBARI CS8900A found at 0x08000300 210 Relocating zImage from 00060000 to C0008000 (len=00100000) Proper ARM zImage ID found. Booting... Uncompressing Linux........................................................... done, booting the kernel. Linux version 2.4.9-ac10-rmk2-np1-cerf2 (linuxdev@greenflash.shore.mbari.org) (gcc version 2.95.3 20010315 (release)) #10 Wed Apr 28 11:56:38 PDT 2004 Processor: Intel StrongARM-1110 revision 9 Architecture: MBARI SideARM v4 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttySA0 cpufreq=191700 root=1f04 rw init=/linuxrc Calibrating delay loop... 127.38 BogoMIPS Memory: 64MB = 64MB total Memory: 62428KB available (1615K code, 296K data, 64K init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd v1.8 Journalled Block Device driver loaded JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. ttySA5 at MEM 0x80050000 (irq = 17) is a SA1100 ttySA6 at MEM 0x80030000 (irq = 16) is a SA1100 ttySA7 at MEM 0x80010000 (irq = 15) is a SA1100 pty: 256 Unix98 ptys configured block: queued sectors max/low 41402kB/13800kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx loop: loaded (max 8 devices) SA1100 flash: probing 16-bit flash bus Using RedBoot partition definition Creating 5 MTD partitions on "SA1100 flash": 0x00000000-0x00020000 : "I-Boot" 0x00000000-0x00020000 : "RedBoot" 0x00020000-0x00060000 : "Partition 2" 0x00060000-0x00160000 : "Partition 3" 0x00160000-0x00fe0000 : "Partition 4" Linux Kernel Card Services 3.1.22 options: [pm] SA-1100 PCMCIA (CS release 3.1.22) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com FAT: bogus logical sector size 408 UMSDOS: msdos_read_super failed, mount aborted. FAT: bogus logical sector size 408 FAT: bogus logical sector size 408 Child dir "." (ino #1) of dir ino #1 appears to be a hard link VFS: Mounted root (jffs2 filesystem). Freeing init memory: 64K Setting up RAMFS, please wait... Executing /sbin/init... INIT: version 2.78 booting Mounting local filesystems... mount: tmpfs already mounted on /mnt/ramfs devpts on /dev/pts type devpts (rw,mode=0622) mount: you didn't specify a filesystem type for /dev/hda1 I will try all types mentioned in /etc/filesystems or /proc/filesystems Trying umsdos mount: /dev/hda1: unknown device mount: proc already mounted Setting the System Clock using the Hardware Clock as reference... Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Calculating module dependencies... depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/loopback.o depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/net.o depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/net_init.o done. Loading modules: slhc CSLIP: code copyright 1989 Regents of the University of California ppp_generic PPP generic driver version 2.4.1 ppp_async ppp_deflate PPP Deflate Compression module registered bsd_comp PPP BSD Compression module registered cerf89x0 cerf89x0: DEBUG negating sleep pin eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:0C:6A:00:04:15 sa1100-rtc SA1100 Real Time Clock driver v1.00 INIT: Entering runlevel: 2 Configuring network interfaces: net_open: called net_close: called net_open: called done. Starting PCMCIA services: cardmgr. Configuring sa1100_gpio gpio port: cardmgr[61]: starting, version is 3.1.22 cardmgr[61]: watching 2 sockets SA1100 GPIO v1.3 device (10,224): stencil=0x000FFFF cardmgr[61]: socket 1: ATA/IDE Fixed Disk done. cardmgr[61]: executing: 'modprobe ide-cs' Configuring sa1100_lddio lddio port: SA1100 LDDIO v1.0 device (10,225): stencil=0x0000FFF done. Configuring sa1100_spi spi port: Trying to free nonexistent resource hda: LEXAR ATA FLASH, ATA DISK drive ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 43 hda: 8053920 sectors (4124 MB) w/1KiB Cache, CHS=7990/16/63 Partition check: hda:SA1100 SPI v1.3 device (10,223) [PTBL] [998/128/63] hda1 ide_cs: hda: Vcc = 3.3, Vpp = 0.0 cardmgr[61]: executing: './ide start hda' done. Configuring Exar serial ports: cardmgr[61]: + ide.opts configuring default,1,11043123949899090093 cardmgr[61]: + ide.opts configuring default,1,11043123949899090093,1 partition 1 xr788: version [1.4 (large flipbuf) Apr 29 2004 10:35:20] base[10000000] irq[2] firstminor[0] ttySX0 at MEM 0x10000000 (irq = 2) is a 16550 ttySX1 at MEM 0x10000020 (irq = 2) is a 16550 ttySX2 at MEM 0x10000040 (irq = 2) is a 16550 ttySX3 at MEM 0x10000060 (irq = 2) is a 16550 ttySX4 at MEM 0x10000080 (irq = 2) is a 16550 ttySX5 at MEM 0x100000a0 (irq = 2) is a 16550 ttySX6 at MEM 0x100000c0 (irq = 2) is a 16550 ttySX7 at MEM 0x100000e0 (irq = 2) is a 16550 cardmgr[61]: + fsck: fsck.auto: not found cardmgr[61]: + /sbin/fsck: Error 2 while executing f hda:sck.auto for hda1 /dev/hd a1 hda: hda1 cardmgr[61]: + /dev/hda1 on /mnt/hda type ext2 (rw) xr788: version [1.4 (large flipbuf) Apr 29 2004 10:35:20] base[10000200] irq[3] firstminor[8] ttySX8 at MEM 0x10000200 (irq = 3) is a 16550 ttySX9 at MEM 0x10000220 (irq = 3) is a 16550 ttySX10 at MEM 0x10000240 (irq = 3) is a 16550 ttySX11 at MEM 0x10000260 (irq = 3) is a 16550 ttySX12 at MEM 0x10000280 (irq = 3) is a 16550 ttySX13 at MEM 0x100002a0 (irq = 3) is a 16550 ttySX14 at MEM 0x100002c0 (irq = 3) is a 16550 ttySX15 at MEM 0x100002e0 (irq = 3) is a 16550 done. Starting system logger: Starting kernel logger: Starting OpenBSD Secure Shell server: sshd. Starting Boa webserver: boa. Setting system date/time to 13/10/2004, 18:08:42. 13 Oct 18:07:08 ntpdate[110]: step time server 134.89.10.65 offset -93.931968 sec Starting SIAM application: skipping SIAM auto start SIAM_AUTOSTART = FALSE done. ************************************************** ** Intrinsyc Linux (I-Linux) ** ** Copyright 2001,2002 Intrinsyc Software Inc. ** ** Version: 4.4 ** ** Support: http://support.intrinsyc.com ** ************************************************** sidearm415 login: ops Password: sidearm415:~$ sidearm415:~$ gosiam sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ ls atp/ cimt-deployed.jffs2 classes/ logs/ properties/ bin/ cimt-deployed.tar.gz jars/ ports/ utils/ sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ ls /sbin/         which fsck /usr/bin/which: /dev/null: Permission denied /usr/bin/which: /dev/null: Permission denied /sbin/fsck sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ ls /sbin cardctl* hdparm* iptunnel* mkfs* route* cardmgr* hwclock* kallsyms@ mkfs.ext2* runlevel* depmod* ide_info* kernelversion* mkfs.jffs2* shutdown* erase* ifconfig* killall5* mkswap* start-stop-daemon* eraseall* ifdown@ klogd* modinfo* sulogin* fdisk* ifport* ksyms@ modprobe@ swapoff@ fsck* ifup* ldconfig* pivot_root* swapon* fsck.ext2* ifuser* lock* poweroff@ syslogd* genksyms* init* losetup* pump* telinit@ getty* insmod* lsmod@ reboot@ unlock* halt* ipmaddr* mii-tool* rmmod@ sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$  Broadcast message from root (pts/0) Wed Oct 13 18:16:21 2004... The system is going down for system halt NOW !! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal INIT: SendStopping SIAM application: done. Saving the System Clock time to the Hardware Clock... cardmgr[61]: + ide.opts configuring default,1,11043123949899090093 cardmgr[61]: + ./ide: fuser: command not found cardmgr[61]: executing: './ide stop hda' cardmgr[61]: + ide.opts configuring default,1,11043123949899090093 cardmgr[61]: + ide.opts configuring default,1,11043123949899090093,1 partition 1 cardmgr[61]: + ./ide: fuser: command not found cardmgr[61]: + /dev/hda1 umounted cardmgr[61]: executing: 'modprobe -r ide-cs' cardmgr[61]: exiting Deactivating swap... done. Unmounting local filesystems... done. net_close: called Power down. + MBARI SideARM v4 IBoot version 1.7 built on Apr 20 2004 at 15:05:38 Copyright 2001,2002 Intrinsyc Software Inc. Copyright 2004 MBARI CS8900A found at 0x08000300 210 Relocating zImage from 00060000 to C0008000 (len=00100000) Proper ARM zImage ID found. Booting... Uncompressing Linux........................................................... done, booting the kernel. Linux version 2.4.9-ac10-rmk2-np1-cerf2 (linuxdev@greenflash.shore.mbari.org) (gcc version 2.95.3 20010315 (release)) #10 Wed Apr 28 11:56:38 PDT 2004 Processor: Intel StrongARM-1110 revision 9 Architecture: MBARI SideARM v4 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttySA0 cpufreq=191700 root=1f04 rw init=/linuxrc Calibrating delay loop... 127.38 BogoMIPS Memory: 64MB = 64MB total Memory: 62428KB available (1615K code, 296K data, 64K init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd v1.8 Journalled Block Device driver loaded JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. ttySA5 at MEM 0x80050000 (irq = 17) is a SA1100 ttySA6 at MEM 0x80030000 (irq = 16) is a SA1100 ttySA7 at MEM 0x80010000 (irq = 15) is a SA1100 pty: 256 Unix98 ptys configured block: queued sectors max/low 41402kB/13800kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx loop: loaded (max 8 devices) SA1100 flash: probing 16-bit flash bus Using RedBoot partition definition Creating 5 MTD partitions on "SA1100 flash": 0x00000000-0x00020000 : "I-Boot" 0x00000000-0x00020000 : "RedBoot" 0x00020000-0x00060000 : "Partition 2" 0x00060000-0x00160000 : "Partition 3" 0x00160000-0x00fe0000 : "Partition 4" Linux Kernel Card Services 3.1.22 options: [pm] SA-1100 PCMCIA (CS release 3.1.22) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com FAT: bogus logical sector size 408 UMSDOS: msdos_read_super failed, mount aborted. FAT: bogus logical sector size 408 FAT: bogus logical sector size 408 Child dir "." (ino #1) of dir ino #1 appears to be a hard link VFS: Mounted root (jffs2 filesystem). Freeing init memory: 64K Setting up RAMFS, please wait... Executing /sbin/init... INIT: version 2.78 booting Mounting local filesystems... mount: tmpfs already mounted on /mnt/ramfs devpts on /dev/pts type devpts (rw,mode=0622) mount: /dev/hda1: unknown device mount: proc already mounted Setting the System Clock using the Hardware Clock as reference... Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Calculating module dependencies... depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/loopback.o depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/net.o depmod: *** Unresolved symbols in /lib/modules/2.4.9-ac10-rmk2-np1-cerf2/kernel/drivers/net/net_init.o done. Loading modules: slhc CSLIP: code copyright 1989 Regents of the University of California ppp_generic PPP generic driver version 2.4.1 ppp_async ppp_deflate PPP Deflate Compression module registered bsd_comp PPP BSD Compression module registered cerf89x0 cerf89x0: DEBUG negating sleep pin eth0: cs8900 rev J Base 0xF0000300<6>, IRQ 47, MAC 00:0C:6A:00:04:15 sa1100-rtc SA1100 Real Time Clock driver v1.00 INIT: Entering runlevel: 2 Configuring network interfaces: net_open: called net_close: called net_open: called done. Starting PCMCIA services: cardmgr. cardmgr[61]: starting, version is 3.1.22 cardmgr[61]: watching 2 sockets Configuring sa1100_gpio gpio port: SA1100 GPIO v1.3 device (10,224): stencil=0x000FFFF cardmgr[61]: socket 1: ATA/IDE Fixed Disk cardmgr[61]: executing: 'modprobe ide-cs' done. Configuring sa1100_lddio lddio port: SA1100 LDDIO v1.0 device (10,225): stencil=0x0000FFF Trying to free nonexistent resource hda: LEXAR ATA FLASH, ATA DISK drive ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 43 hda: 8053920 sectors (4124 MB) w/1KiB Cache, CHS=7990/16/63 Partition check: hda:done. Configuring sa1100_spi spi port: SA1100 SPI v1.3 device (10,223) [PTBL] [998/128/63] hda1 ide_cs: hda: Vcc = 3.3, Vpp = 0.0 cardmgr[61]: executing: './ide start hda' done. Configuring Exar serial ports: cardmgr[61]: + ide.opts configuring default,1,11043123949899090093 cardmgr[61]: + ide.opts configuring default,1,11043123949899090093,1 partition 1 xr788: version [1.4 (large flipbuf) Apr 29 2004 10:35:20] base[10000000] irq[2] firstminor[0] ttySX0 at MEM 0x10000000 (irq = 2) is a 16550 ttySX1 at MEM 0x10000020 (irq = 2) is a 16550 ttySX2 at MEM 0x10000040 (irq = 2) is a 16550 ttySX3 at MEM 0x10000060 (irq = 2) is a 16550 ttySX4 at MEM 0x10000080 (irq = 2) is a 16550 ttySX5 at MEM 0x100000a0 (irq = 2) is a 16550 ttySX6 at MEM 0x100000c0 (irq = 2) is a 16550 ttySX7 at MEM 0x100000e0 (irq = 2) is a 16550 hda: hda1 cardmgr[61]: + /dev/hda1: clean, 1041/503936 files, 191167/1005976 blocks hda: hda1 hda: hda1 cardmgr[61]: + /dev/hda1 on /mnt/hda type ext2 (rw) xr788: version [1.4 (large flipbuf) Apr 29 2004 10:35:20] base[10000200] irq[3] firstminor[8] ttySX8 at MEM 0x10000200 (irq = 3) is a 16550 ttySX9 at MEM 0x10000220 (irq = 3) is a 16550 ttySX10 at MEM 0x10000240 (irq = 3) is a 16550 ttySX11 at MEM 0x10000260 (irq = 3) is a 16550 ttySX12 at MEM 0x10000280 (irq = 3) is a 16550 ttySX13 at MEM 0x100002a0 (irq = 3) is a 16550 ttySX14 at MEM 0x100002c0 (irq = 3) is a 16550 ttySX15 at MEM 0x100002e0 (irq = 3) is a 16550 done. Starting system logger: Starting kernel logger: Starting OpenBSD Secure Shell server: sshd. Starting Boa webserver: boa. Setting system date/time to 13/10/2004, 18:19:06. 13 Oct 18:17:31 ntpdate[111]: step time server 134.89.10.65 offset -94.822893 sec Starting SIAM application: skipping SIAM auto start SIAM_AUTOSTART = FALSE done. ************************************************** ** Intrinsyc Linux (I-Linux) ** ** Copyright 2001,2002 Intrinsyc Software Inc. ** ** Version: 4.4 ** ** Support: http://support.intrinsyc.com ** ************************************************** sidearm415 login: ops Password: Login incorrect login: ops Password: sidearm415:~$ sidearm415:~$ gosiam sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ ls atp/ cimt-deployed.jffs2 classes/ logs/ properties/ bin/ cimt-deployed.tar.gz jars/ ports/ utils/ sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ **1000000000045a bash: **1000000000045a: command not found sidearm415:/mnt/hda/siam$ ps -ef UID PID PPID C STIME TTY TIME CMD root 1 0 0 18:17 ? 00:00:10 init [2] root 2 1 0 18:17 ? 00:00:00 [keventd] root 3 0 0 18:17 ? 00:00:00 [ksoftirqd_CPU0] root 4 0 0 18:17 ? 00:00:00 [kswapd] root 5 0 0 18:17 ? 00:00:00 [kreclaimd] root 6 0 0 18:17 ? 00:00:00 [bdflush] root 7 0 0 18:17 ? 00:00:00 [kupdated] root 8 1 0 18:17 ? 00:00:00 [mtdblockd] root 9 1 0 18:17 ? 00:00:00 [jffs2_gcd_mtd4] root 54 1 0 18:17 ? 00:00:00 pump -i eth0 root 61 1 0 18:17 ? 00:00:00 /sbin/cardmgr root 84 1 0 18:17 ? 00:00:00 klogd root 85 1 0 18:17 ? 00:00:00 syslogd -m 0 root 92 1 0 18:17 ? 00:00:00 /usr/sbin/sshd httpd 95 1 0 18:17 ? 00:00:00 /usr/bin/boa root 98 1 0 18:17 ? 00:00:00 /bin/bash /etc/siam/manageLog /v root 99 1 0 18:17 ? 00:00:00 /bin/bash /etc/siam/manageLog /v ops 121 1 0 18:17 ttySA0 00:00:00 -bash root 313 92 0 18:40 ? 00:00:02 /usr/sbin/sshd ops 314 313 0 18:40 pts/0 00:00:00 -bash root 388 314 0 18:49 pts/0 00:00:00 su root 389 388 0 18:49 pts/0 00:00:00 sh root 405 389 0 18:50 pts/0 00:00:00 sz fsckmods.tar.gz root 409 98 0 18:50 ? 00:00:00 /bin/sleep 60 root 413 99 0 18:50 ? 00:00:00 /bin/sleep 60 ops 416 121 0 18:51 ttySA0 00:00:00 ps -ef sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ su Password: sidearm415:/mnt/hda/siam# sidearm415:/mnt/hda/siam# kill 405 sidearm415:/mnt/hda/siam# sidearm415:/mnt/hda/siam# sz    scp   sz fsk ck       cd /etc/ sidearm415:/etc# sidearm415:/etc# sz fsckmods.tar.gz rz **B00000000000000 Šsidearm415:/etc# sz fsckmods.tar.gz rz **B00000000000000 Šsidearm415:/etc# cat /et   fstab # /dev/mtdblock3 / jffs2 defaults 0 0 tmpfs /mnt/ramfs tmpfs defaults 0 0 proc /proc proc defaults 0 0 devpts /dev/pts devpts mode=0622 0 0 /dev/hda1 /mnt/hda ext2 defaults 0 0 #tempest:/vol/vol0/users/oreilly /home/oreilly/tempest nfs bg,soft,nosuid,nodev,exec sidearm415:/etc# sidearm415:/etc# ls -l pcmcia/ total 110 -rwxr-xr-x 1 root root 995 Jul 8 1999 cdrom -rw-r--r-- 1 root root 296 Jul 8 1999 cdrom.opts drwxr-xr-x 1 root root 0 Apr 19 2001 cis -rw-r--r-- 1 root daemon 39462 Nov 13 2001 config -r--r--r-- 1 root root 1067 Nov 7 2001 config.opts -r-xr-xr-x 1 root root 1454 Jun 6 2000 ftl -r--r--r-- 1 root root 251 Jun 6 2000 ftl.opts -r-xr-xr-x 1 root root 1667 Jun 6 2000 ide -r--r--r-- 1 root root 569 Oct 13 18:05 ide.opts -rw-r--r-- 1 root root 554 Oct 13 18:02 ide.opts.orig -r-xr-xr-x 1 root root 3338 Aug 25 2000 install-etc -r-xr-xr-x 1 root root 2233 Jun 6 2000 memory -r--r--r-- 1 root root 318 Jun 6 2000 memory.opts -r-xr-xr-x 1 root root 6389 Jul 7 2000 network -r--r--r-- 1 root root 1489 Oct 9 2000 network.opts -r-xr-xr-x 1 root root 1556 Jun 6 2000 parport -r--r--r-- 1 root root 308 Jun 6 2000 parport.opts -r-xr-xr-x 1 root root 4077 Jul 6 2000 rc.pcmcia -r-xr-xr-x 1 root root 1790 Jun 6 2000 scsi -r--r--r-- 1 root root 573 Jun 6 2000 scsi.opts -r-xr-xr-x 1 root root 2485 Jun 6 2000 serial -r--r--r-- 1 root root 407 Jun 6 2000 serial.opts -r--r--r-- 1 root root 3109 Aug 22 2000 shared -rwxr-xr-x 1 root root 7 Sep 23 1999 video -rw-r--r-- 1 root root 0 Sep 23 1999 video.opts -r-xr-xr-x 1 root root 2345 Apr 29 2000 wireless -r--r--r-- 1 root root 3479 Aug 9 2000 wireless.opts -rwxr-xr-x 1 root root 2103 Oct 29 1999 wlan -rwxr-xr-x 1 root root 8924 Jul 11 2000 wlan-ng -rwxr-xr-x 1 root root 331 Aug 11 2000 wlan-ng.conf -rwxr-xr-x 1 root root 5155 Jul 11 2000 wlan-ng.opts -rw-r--r-- 1 root root 6200 Oct 29 1999 wlan.network.opts -rw-r--r-- 1 root root 514 Oct 29 1999 wlan.opts sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# sidearm415:/etc# /root/suspend             root    exit exit sidearm415:/mnt/hda/siam$ sidearm415:/mnt/hda/siam$ exit logout ************************************************** ** Intrinsyc Linux (I-Linux) ** ** Copyright 2001,2002 Intrinsyc Software Inc. ** ** Version: 4.4 ** ** Support: http://support.intrinsyc.com ** ************************************************** sidearm415 login: