README_FAB_MAIN.TXT

Monterey Bay Aquarium Research Institute

Date: October 1, 2001

QUOTE REQUEST

Board name:  HDTV Optical Wavelength Transceiver - Camera

Board Number:  

Contact: Lance McBride
Voice:   831-775-2046
Fax:     831-775-1620
e-mail:  lance@mbari.org
 
Address:   MBARI
	   7700 Sandholdt Rd
	   Moss Landing, CA 95039-9644


Fabrication data included in TRANSCEIVER.ZIP:

                Gerber Files

*.glc - Glue component side
*.psc - Paste component side
*.tss - Top component side silkscreen
*.tsm - Top component side solder mask
*.cmp - Component side copper layer (1)
*.sol - Solder side copper layer (2)
*.bsm - Bottom solder solder mask
*.bss - Bottom solder side silk screen
*.pss - Paste solder side
*.gls - Glue solder side

*.dril - Drill (Gerber)
*.drl - Drill rack (Excellon)
*.drd - Drill (Excellon)
*.dri - Drill (Excellon) intermediate file
*.gpi - Drill (Excellon) intermediate file 

Notes:

Overall Dimensions:  2.500" X 4.000"

Number of layers:  2

0.031" nominal PWB thickness, FR4 material

1 oz. copper

Blue soldermask over bare copper, 2 sides

White silkscreen, top and bottom.

Minimum air gap:  7 mil

Minimum line width:  10 mil

Minimum hole size: 24 mil

Finished hole sizes are dimensions  +/-.003

Lead time:  5 day

Qty SMD pads bottom: 17

Qty SMD pads top: 3

SMD pitch: n/a

CNC route points: 4

Scoring: no

Quantities:  10

Special Needs: 

* Blue soldermask, as noted above.

* Electrical test required

* 2X check plots requested





 
