[INIT]
WM32      0x3FF4000     0xBFE80070  ;  Re-Map Flash and SDRAM
WM32      0x3FF4010     0x02800000  ;  Set Flash Base Address
WM32      0x3FF4030     0x3FC0000E  ;  Set Base of SDRAM to 0
WM32      0x3FF4038     0x0000000A  ;  Set SDRAM Timing
WM32      0x3FF403C     0x00030000  ;  Send SDRAM NOP Command
DELAY 10                            ;
WM32      0x3FF403C     0x00010000  ;  Send SDRAM PRECHARGE Command
DELAY 10                            ;
WM32      0x3FF4040     0x00000014  ;  Set Quick Refresh (#20)
DELAY 10                            ;
WM32      0x3FF4040     0x00000168  ;  Set Normal Refresh (#360)
WM32      0x3FF403C     0x00020033  ;  Send SDRAM Mode Comamnd
DELAY 10                            ;
; WGPR 11 0xb0000020		; Give GDB a valid stack frame
; WM32 0xb0000020 0x28
[TARGET]
CPUTYPE     ARM920T
CLOCK       1                   ;JTAG clock (0=Adaptive, 1=8MHz, 2=4MHz,3=2MHz)
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
BREAKMODE   SOFT 0xDFFFDFFF     ;SOFT or HARD, ARM / Thumb break code
[HOST]
IP          192.168.0.1
[FLASH]
CHIPTYPE    AT49X16
CHIPSIZE    0x400000
BUSWIDTH    16
FORMAT      BIN
FILE        boot.bin
[REGS]
; FILE   reg920T.def