1


Rover Test Function Menu

  1 -- Drive system
  2 -- Rack system
  3 -- Current meter
  4 -- Video system
  5 -- Film Camera/Strobe/Transponder
  6 -- Port Levels
  7 -- System Parameters
  8 -- Instrument/Compass Setup
  9 -- Exit
Enter Selection:  [9] ? 8

0 -- Aux Instruments
1 -- Benthic Chamber 1
2 -- Benthic Chamber 2
3 -- Microprofiler
4 -- Not Assigned
5 -- Video 1
6 -- Video 2
7 -- Compass
9 -- Return to Test Menu
Enter Selection:  [9] ? 1
Control-C to Exit





Benthic Chamber Main Menu V1.0
1 -- Test Functions
2 -- Setup
3 -- Data Cycle
4 -- Offload Data
5 -- Cal Data Cycle
9 -- Reset

Enter Selection:  [0] ? 2
2


1 -- Set Date/Time
2 -- Set Mission Parameters
3 -- Set Calibration Parameters
9 -- Exit

Enter Selection [9] ? 2
2
Enter Sample Sets:  [3] ? 

Enter Sample Rate (sets/day):  [3] ? 6
6
Enter Flow Cell Delay (min):  [5] ? 

Enter Flow Pump Speed (10-80):  [35] ? 

Enter Stir Speed (RPM):  [9] ? 

Enter BC Cal Time (min):  [50] ? 



1 -- Set Date/Time
2 -- Set Mission Parameters
3 -- Set Calibration Parameters
9 -- Exit

Enter Selection [9] ? 2
2
Enter Sample Sets:  [3] ? 

Enter Sample Rate (sets/day):  [6] ? 

Enter Flow Cell Delay (min):  [5] ? 

Enter Flow Pump Speed (10-80):  [35] ? 

Enter Stir Speed (RPM):  [9] ? 

Enter BC Cal Time (min):  [50] ? 



1 -- Set Date/Time
2 -- Set Mission Parameters
3 -- Set Calibration Parameters
9 -- Exit

Enter Selection [9] ? 



Benthic Chamber Main Menu V1.0
1 -- Test Functions
2 -- Setup
3 -- Data Cycle
4 -- Offload Data
5 -- Cal Data Cycle
9 -- Reset

Enter Selection:  [0] ? 



Benthic Chamber Main Menu V1.0
1 -- Test Functions
2 -- Setup
3 -- Data Cycle
4 -- Offload Data
5 -- Cal Data Cycle
9 -- Reset

Enter Selection:  [0] ? 

0 -- Aux Instruments
1 -- Benthic Chamber 1
2 -- Benthic Chamber 2
3 -- Microprofiler
4 -- Not Assigned
5 -- Video 1
6 -- Video 2
7 -- Compass
9 -- Return to Test Menu
Enter Selection:  [9] ? 2
Control-C to Exit





Benthic Chamber Main Menu V1.0
1 -- Test Functions
2 -- Setup
3 -- Data Cycle
4 -- Offload Data
5 -- Cal Data Cycle
9 -- Reset

Enter Selection:  [0] ? 2
2


1 -- Set Date/Time
2 -- Set Mission Parameters
3 -- Set Calibration Parameters
9 -- Exit

Enter Selection [9] ? 2
2
Enter Sample Sets:  [3] ? 

Enter Sample Rate (sets/day):  [3] ? 6
6
Enter Flow Cell Delay (min):  [5] ? 

Enter Flow Pump Speed (10-80):  [35] ? 

Enter Stir Speed (RPM):  [9] ? 

Enter BC Cal Time (min):  [50] ? 



1 -- Set Date/Time
2 -- Set Mission Parameters
3 -- Set Calibration Parameters
9 -- Exit

Enter Selection [9] ? 2
2
Enter Sample Sets:  [3] ? 

Enter Sample Rate (sets/day):  [6] ? 

Enter Flow Cell Delay (min):  [5] ? 

Enter Flow Pump Speed (10-80):  [35] ? 

Enter Stir Speed (RPM):  [9] ? 

Enter BC Cal Time (min):  [50] ? 



1 -- Set Date/Time
2 -- Set Mission Parameters
3 -- Set Calibration Parameters
9 -- Exit

Enter Selection [9] ? 



Benthic Chamber Main Menu V1.0
1 -- Test Functions
2 -- Setup
3 -- Data Cycle
4 -- Offload Data
5 -- Cal Data Cycle
9 -- Reset

Enter Selection:  [0] ? 

0 -- Aux Instruments
1 -- Benthic Chamber 1
2 -- Benthic Chamber 2
3 -- Microprofiler
4 -- Not Assigned
5 -- Video 1
6 -- Video 2
7 -- Compass
9 -- Return to Test Menu
Enter Selection:  [9] ? 
Control-C to Exit




Rover Test Function Menu

  1 -- Drive system
  2 -- Rack system
  3 -- Current meter
  4 -- Video system
  5 -- Film Camera/Strobe/Transponder
  6 -- Port Levels
  7 -- System Parameters
  8 -- Instrument/Compass Setup
  9 -- Exit
Enter Selection:  [9] ? 


Rover System Main Menu V1.4

  1 -- Test Functions
  2 -- Setup Deployment
  3 -- Deploy
  4 -- Data Files
  5 -- Sleep
  8 -- Test Deployment
  9 -- Reset
Enter Selection:  [9] ? 2


Rover Setup Menu

  1 -- Set Clock
  2 -- Change Mission Defaults
  3 -- Change System Defaults
  4 -- Change Calibration Coefficients
  9 -- Exit
Enter Selection:  [9] ? 1
Set Current Date and Time (CMD-D from CrossCut)
<CR> for default [11/15/95 12:11:10] ? 


Rover Setup Menu

  1 -- Set Clock
  2 -- Change Mission Defaults
  3 -- Change System Defaults
  4 -- Change Calibration Coefficients
  9 -- Exit
Enter Selection:  [9] ? 2
Enter deploy delay time (min):  [240] ? 
Enter travel distance in meters:  [5] ? 
Enter current meter data rate (min):  [10] ? 5
Enter prime heading decision time (min):  [60] ? 
Enter maximum current wait time (min):  [60] ? 
Enter dust-settle time:  [60] ? 
Enter rack down time (min):  [2280] ? 720
Enter number of sites:  [1] ? 
Enter video on time (min):  [5] ? 
Enter Benthic Chamber cal time (min):  [60] ? 


Rover Setup Menu

  1 -- Set Clock
  2 -- Change Mission Defaults
  3 -- Change System Defaults
  4 -- Change Calibration Coefficients
  9 -- Exit
Enter Selection:  [9] ? 2
Enter deploy delay time (min):  [240] ? 
Enter travel distance in meters:  [5] ? 
Enter current meter data rate (min):  [5] ? 
Enter prime heading decision time (min):  [60] ? 
Enter maximum current wait time (min):  [60] ? 
Enter dust-settle time:  [60] ? 
Enter rack down time (min):  [720] ? 
Enter number of sites:  [1] ? 
Enter video on time (min):  [5] ? 
Enter Benthic Chamber cal time (min):  [60] ? 


Rover Setup Menu

  1 -- Set Clock
  2 -- Change Mission Defaults
  3 -- Change System Defaults
  4 -- Change Calibration Coefficients
  9 -- Exit
Enter Selection:  [9] ? 


Rover System Main Menu V1.4

  1 -- Test Functions
  2 -- Setup Deployment
  3 -- Deploy
  4 -- Data Files
  5 -- Sleep
  8 -- Test Deployment
  9 -- Reset
Enter Selection:  [9] ? 3


Deployment delay time: 240 minutes.
Transit distance: 5 meters
Rack down time: 720 min.
Max. sites: 1
Video on time: 5 min.
Prime heading time: 60 min.
Maximum current wait time: 60 min.
Current meter data rate: 5 min.
Benthic Chamber cal time: 60 min.

Deploy function will erase data memory.
Do you want to continue?  (Yes/No) [N] ? y


Rover will activate in: 240 minutes.

Disconnect comm. cable and deploy...