June 2006	Kontron PC/104 Bios Setup for Jason Camera Tripods

Need VGA monitor & keyboard plugged into Kontron PC/104

Power up Kontron
Interrupt w/ F2 key (just like desktop PCs)

Work through the menu & check everything:


** Main Tab
  Legacy Diskette A: Disabled
  Legacy Diskette B: Disabled

  Primary Master [whatever is actually installed]
  	The 3 Jason Systems (June 2006):  WDC WD400VE-00HDT0-(PM)]
	Type:  [Auto]
		LBA Format
  		
  	32 Bit I/O:	[Enabled]	  	
  		
  Primary Slave:  [None]
  Compact Flash:  [None]
  
  System Memory:   640 KB
  Extended Memory: 125951 KB
  
  
** Advanced Tab
  Advanced Chipset Control
	Multiple Monitor Support	[Adapter Primary]
	Video Resolution		[Super]
	Display Mode    		[CRT only]
	
  	PNP OS installed:		[No]
  	Secured Setup Configurations	[No]
  	Reset Configuration Data:	[No]
  PCI Configuration
  	PCI ..UMB	All Available
  	PCI ..IRQ	All Available
  	PCI ..DMA	All Available
  	ISA graphics device installed:	[No]
  	
  PS/2 Mouse	[Disabled]
  Keyboard Features

  I/O Device Configuration
	Local Bus IDE adapter:	[Both]
	Onboard FDC:		[Disabled]
	
	Serial port A:		[Auto]
	Serial port B:		[Auto]
	Onboard LPT:		[Disabled]
	
	USB Host Controller:	[Enabled]
	USB BIOS Legacy Support:[Enabled]
	OHCI Registers at:	[E0000h]
	
	Watchdog Settings
		Disabled
		
  Ethernet Configuration
  	Onboard Ethernet 1	[Enabled]
  	Onboard Ethernet 2	[Disabled]
  	
  Large Disk Access Mode	[DOS]
  Halt On Errors		[No]


** Security Tab
  All Clear, Normal or Disabled
  
  
** Power Tab
  Power Savings:	[Disabled]


** Boot Tab
  Floppy check:		[Disabled]
  Summary screen:	[Disabled]
  QuickBoot Mode:	[Enabled]
  Dark Boot:		[Disabled]
  
  Boot Device Priority
  	ATAPI CD-ROM Drive
  	Hard Drive (in this order, add or delete as required)	
  		Actual hard drive
  		Bootable Add-in Cards

  	Removable Devices
  	Network Boot
  
  Onboard LAN RPL ROM	[Disabled]
  
** Exit Tab
  Exit Saving Changes
  
  
  

  	