;:ts=8 far code far data ;/* TT8 specific includes */ ; ;#include /* Tattletale Model 8 Definitions */ ;#include /* 68332 Tattletale (7,8) Hardware Definitions */ ;#include /* 68332 System Integration Module Definitions */ ;#include /* 68332 Queued Serial Module Definitions */ ;#include /* 68332 Time Processing Unit Definitions */ ;#include /* 68332 Digital I/O Port Pin Definitions */ ;#include /* Model 8 PIC Parallel Slave Port Definitions */ ;#include /* definitions and prototypes for Model 8 library */ ; ;/* general C includes */ ;#include ;#include ;#include ; ;// includes related to the disk drive ;#include ; ;// includes for the data logger ;#include "assert.h" ;#include "eeprom.h" ; ;// Not actually used in the setup program, but necessary in order to link in the ;// logdisk routines. ;char wd[EMAXPATH] = "A:\\"; dseg xdef _wd _wd: dc.b 65 dc.b 58 dc.b 92 dc.b 0 ds.b 256 cseg ;const long DISK_FREQ = (long)8e6; ds 0 xdef _DISK_FREQ _DISK_FREQ: dc.l $7a1200 cseg ; ;int main (int argc, char** argv) { # 29 'setup.c' 677097191 | .2 xdef _main _main: movem.l d2,-(sp) ; int answer; ; ; InitTT8(NO_WATCHDOG, TT8_TPU); // setup Model 8 for running C programs ~ answer d2 "i" ~~ argc 8 "i" ~~ argv 10 "##c" ^^^ move.w #-1,-(sp) move.w #-1,-(sp) jsr _InitTT8 ; SimSetFSys(6e6); // currently run at 6 MHz ^ pea 6000000 jsr _SimSetFSys ; SerSetBaud(9600,0); // reset baud after every clock change ^ clr.l -(sp) pea 9600 jsr _SerSetBaud ; printf ("I print, therefore I am.\n"); ^ pea .1+0 jsr _printf ; ; // read the current values of the eeprom ; printf ("The current value of the setup data is:\n"); ^^^ pea .1+26 jsr _printf ; if (eeprom_read_setup_data (0) != 0) { ^ clr.w -(sp) jsr _eeprom_read_setup_data tst.w d0 lea 26(sp),sp beq .10001 ; printf ("Couldn't read data. The defaults would be:\n"); ^ pea .1+67 jsr _printf ; eeprom_print_setup_data (); ^ jsr _eeprom_print_setup_data ; return 0; ^ move.l #0,d0 add.w #4,sp .3 movem.l (sp)+,d2 rts ; } ^; eeprom_print_setup_data (); .10001 ^ jsr _eeprom_print_setup_data ; ; // reset setup data to defaults ; printf ("The default values are:\n"); ^^^ pea .1+112 jsr _printf ; eeprom_set_default_setup_data (); ^ jsr _eeprom_set_default_setup_data ; eeprom_print_setup_data (); ^ jsr _eeprom_print_setup_data ; ; if (SerByteAvail ()) ^^; answer = SerGetByte (); jsr _SerByteAvail tst.w d0 add.w #4,sp beq .10002 ^ jsr _SerGetByte move.w d0,d2 ; printf ("Do you want to write the defaults to the EEPROM? "); .10002 ^ pea .1+137 jsr _printf ; fflush (stdout); ^ pea __iob+22 jsr _fflush ; answer = SerGetByte (); ^ jsr _SerGetByte move.w d0,d2 ; printf ("%c\n", (char)answer); ^ move.w d2,d0 ext.w d0 move.w d0,-(sp) pea .1+187 jsr _printf ; if (answer != 'y') ^; return 0; cmp.w #121,d2 lea 14(sp),sp beq .10003 ^ move.l #0,d0 bra .3 ; ; // write data and read it back to verify ; if (eeprom_write_setup_data (0) != 0) { .10003 ^^^ clr.w -(sp) jsr _eeprom_write_setup_data tst.w d0 add.w #2,sp beq .10004 ; printf ("Couldn't write - quitting.\n"); ^ pea .1+191 jsr _printf ; return 0; ^ move.l #0,d0 add.w #4,sp bra .3 ; } ^; ; // zero the current data just in case the read fails ; memset (&setup_data, 0, sizeof(setup_data)); .10004 ^^^ pea 82 clr.w -(sp) pea _setup_data jsr _memset ; // read and print the setup data so we can verify that it ; // was properly written to eeprom ; printf ("\nRead as:\n"); ^^^ pea .1+219 jsr _printf ; if (eeprom_read_setup_data (0) != 0) { ^ clr.w -(sp) jsr _eeprom_read_setup_data tst.w d0 lea 16(sp),sp beq .10005 ; printf ("Oops - couldn't read.\n"); ^ pea .1+230 jsr _printf ; return 0; ^ move.l #0,d0 add.w #4,sp bra .3 ; } ^; eeprom_print_setup_data (); .10005 ^ jsr _eeprom_print_setup_data ; ResetToMon (); ^; ResetToMon dc.w $13fc dc.w $c1 dc.w $e0 dc.w $0 dc.w $4e70 ; return 0; ^ move.l #0,d0 bra .3 ;} ^.2 .1 dc.b 73,32,112,114,105,110,116,44,32,116,104,101,114,101,102 dc.b 111,114,101,32,73,32,97,109,46,10,0,84,104,101,32 dc.b 99,117,114,114,101,110,116,32,118,97,108,117,101,32,111 dc.b 102,32,116,104,101,32,115,101,116,117,112,32,100,97,116 dc.b 97,32,105,115,58,10,0,67,111,117,108,100,110,39,116 dc.b 32,114,101,97,100,32,100,97,116,97,46,32,32,84,104 dc.b 101,32,100,101,102,97,117,108,116,115,32,119,111,117,108 dc.b 100,32,98,101,58,10,0,84,104,101,32,100,101,102,97 dc.b 117,108,116,32,118,97,108,117,101,115,32,97,114,101,58 dc.b 10,0,68,111,32,121,111,117,32,119,97,110,116,32,116 dc.b 111,32,119,114,105,116,101,32,116,104,101,32,100,101,102 dc.b 97,117,108,116,115,32,116,111,32,116,104,101,32,69,69 dc.b 80,82,79,77,63,32,0,37,99,10,0,67,111,117,108 dc.b 100,110,39,116,32,119,114,105,116,101,32,45,32,113,117 dc.b 105,116,116,105,110,103,46,10,0,10,82,101,97,100,32 dc.b 97,115,58,10,0,79,111,112,115,32,45,32,99,111,117 dc.b 108,100,110,39,116,32,114,101,97,100,46,10,0 ds 0 ; ; ;// This subroutine spoofs a routine which is used by the normal logger program, ;// but which is unused for the setup. It is easier to resolve the external reference ;// here than it is to include the science logger and all its required code ;// ;void sci_logger_setup_partition (void) { # 85 | .5 xdef _sci_logger_setup_partition _sci_logger_setup_partition: ; return; ^.6 rts ;} ^.5 ; ; # 88 | ~ _main * "(i" ~ _DISK_FREQ * "l" ~ _wd * "[260c" ~ _eeprom_print_setup_data * "(v" ~ _eeprom_set_default_setup_data * "(v" ~ _eeprom_write_setup_data * "(i" ~ _eeprom_read_setup_data * "(i" ~ 'setup_variables' ~ 1 13 82 ~ eng_rate 0 "[4l" ~ science_rate 16 "f" ~ science_gain 20 "[4f" ~ science_chans 36 "i" ~ trigger_chans 38 "i" ~ t_STA 40 "f" ~ t_LTA 44 "f" ~ trigger_level 48 "[4f" ~ post_event_time 64 "f" ~ pre_event_time 68 "f" ~ min_disk_write 72 "l" ~ science_n_to_average 76 "i" ~ tick_offset 78 "l" ~ _setup_data * ":" 1 ~ _sci_logger_setup_partition * "(v" ~ 'system_user' ~ 2 4 46 ~ task_handle 0 "i" ~ rtfs_errno 2 "i" ~ dfltdrv 4 "i" ~ lcwd 6 "[10#v" ~ PSYSTEM_USER "#:" 2 ~ SYSTEM_USER ":" 2 ~ 'finode' ~ 'ddrive' ~ 'fatswap' ~ 5 7 300 ~ n_to_swap 0 "I" ~ n_blocks_used 2 "I" ~ n_blocks_total 4 "I" ~ pdirty 6 "[32C" ~ block_0_is_valid 38 "i" ~ data_map 40 "[256C" ~ data_array 296 "#C" ~ 4 37 484 ~ opencount 0 "i" ~ volume_serialno 2 "L" ~ volume_label 6 "[14C" ~ drv_serial_number 20 "[62C" ~ partition_base 82 "L" ~ partition_size 86 "L" ~ partition_type 90 "C" ~ current_power_count 92 "L" ~ bytespcluster 96 "I" ~ byte_into_cl_mask 98 "L" ~ fasize 102 "I" ~ rootblock 104 "L" ~ firstclblock 108 "L" ~ driveno 112 "I" ~ maxfindex 114 "L" ~ fatblock 118 "L" ~ secproot 122 "I" ~ fat_is_dirty 124 "i" ~ fat_swap_structure 126 ":" 5 ~ bootaddr 426 "L" ~ oemname 430 "[9c" ~ bytspsector 440 "I" ~ secpalloc 442 "C" ~ log2_secpalloc 444 "I" ~ secreserved 446 "I" ~ numfats 448 "C" ~ numroot 450 "I" ~ numsecs 452 "L" ~ mediadesc 456 "C" ~ secpfat 458 "L" ~ secptrk 462 "I" ~ numhead 464 "I" ~ numhide 466 "L" ~ free_contig_base 470 "L" ~ free_contig_pointer 474 "L" ~ known_free_clusters 478 "l" ~ infosec 482 "I" ~ 'segdesc' ~ 6 4 14 ~ nsegs 0 "i" ~ segindex 2 "i" ~ ncksum 4 "C" ~ segblock 6 "[2L" ~ 3 18 72 ~ fname 0 "[8C" ~ fext 8 "[3C" ~ fattribute 11 "C" ~ resarea 12 "[8C" ~ fclusterhi 20 "I" ~ ftime 22 "I" ~ fdate 24 "I" ~ fcluster 26 "I" ~ fsize 28 "L" ~ alloced_size 32 "L" ~ opencount 36 "i" ~ openflags 38 "i" ~ my_drive 40 "#:" 4 ~ my_block 44 "L" ~ my_index 48 "i" ~ pnext 50 "#:" 3 ~ pprev 54 "#:" 3 ~ s 58 ":" 6 ~ 'drobj' ~ 'dirblk' ~ 8 3 10 ~ my_frstblock 0 "L" ~ my_block 4 "L" ~ my_index 8 "i" ~ 'blkbuff' ~ 9 7 532 ~ pnext 0 "#:" 9 ~ lru 4 "L" ~ pdrive 8 "#:" 4 ~ blockno 12 "L" ~ use_count 16 "i" ~ pad_to_4_align 18 "i" ~ data 20 "[512C" ~ 7 5 24 ~ pdrive 0 "#:" 4 ~ finode 4 "#:" 3 ~ blkinfo 8 ":" 8 ~ isroot 18 "i" ~ pblkbuff 20 "#:" 9 ~ 'datestr' ~ 10 2 4 ~ date 0 "I" ~ time 2 "I" ~ 'pc_file' ~ 11 8 24 ~ pobj 0 "#:" 7 ~ flag 4 "I" ~ fptr 6 "L" ~ fptr_cluster 10 "L" ~ fptr_block 14 "L" ~ needs_flush 18 "i" ~ is_free 20 "i" ~ at_eof 22 "i" ~ 'block_alloc' ~ 12 1 512 ~ core 0 "[512C" ~ 'ptable' ~ 'ptable_entry' ~ 14 8 16 ~ boot 0 "C" ~ s_head 1 "C" ~ s_cyl 2 "I" ~ p_typ 4 "C" ~ e_head 5 "C" ~ e_cyl 6 "I" ~ r_sec 8 "L" ~ p_size 12 "L" ~ 13 2 66 ~ ents 0 "[4:" 14 ~ signature 64 "I" ~ PTABLE ":" 13 ~ PTABLE_ENTRY ":" 14 ~ 'format_dec_tree' ~ 15 3 8 ~ sec_p_alloc 0 "I" ~ ents_p_root 2 "I" ~ n_blocks 4 "L" ~ FORMAT_DEC_TREE ":" 15 ~ PC_FILE ":" 11 ~ DROBJ ":" 7 ~ BLKBUFF ":" 9 ~ DIRBLK ":" 8 ~ FINODE ":" 3 ~ SEGDESC ":" 6 ~ 'lfninode' ~ 16 8 32 ~ lfnorder 0 "C" ~ lfname1 1 "[10C" ~ lfnattribute 11 "C" ~ lfnres 12 "C" ~ lfncksum 13 "C" ~ lfname2 14 "[12C" ~ lfncluster 26 "I" ~ lfname3 28 "[4C" ~ LFNINODE ":" 16 ~ 'dosinode' ~ 17 9 32 ~ fname 0 "[8C" ~ fext 8 "[3C" ~ fattribute 11 "C" ~ resarea 12 "[8C" ~ fclusterhi 20 "I" ~ ftime 22 "I" ~ fdate 24 "I" ~ fcluster 26 "I" ~ fsize 28 "L" ~ DOSINODE ":" 17 ~ DDRIVE ":" 4 ~ FATSWAP ":" 5 ~ BLOCK_ALLOC ":" 12 ~ CLUSTERTYPE "L" ~ 'ide_control' ~ 'ide_drive_desc' ~ '' ~ 'atapi_packet_desc' ~ 'transfer_length' ~ 22 2 2 ~ msb 0 "C" ~ lsb 1 "C" ~ 21 8 14 ~ op_code 0 "C" ~ lun 1 "C" ~ lba 2 "L" ~ reserved1 6 "C" ~ transfer_length 8 ":" 22 ~ reserved2 10 "C" ~ reserved3 11 "C" ~ reserved4 12 "C" ~ 'atapi_mode_sense_packet_desc' ~ 23 11 14 ~ op_code 0 "C" ~ lun 1 "C" ~ pc_code_page 2 "C" ~ reserved1 3 "C" ~ reserved2 4 "C" ~ reserved3 5 "C" ~ reserved4 6 "C" ~ transfer_length 8 ":" 22 ~ reserved5 10 "C" ~ reserved6 11 "C" ~ reserved7 12 "C" ~ 'atapi_format_unit_packet_desc' ~ 24 5 12 ~ op_code 0 "C" ~ defect_list_format 1 "C" ~ track_number 2 "C" ~ interleave 3 "[2C" ~ reserved 5 "[7C" ~ 'atapi_old_format_unit_packet_de' ~ 25 7 12 ~ op_code 0 "C" ~ reserved1 1 "C" ~ medium 2 "C" ~ reserved2 3 "[3C" ~ control_byte 6 "C" ~ track_number 7 "C" ~ reserved3 8 "[4C" ~ 'atapi_start_stop_packet_desc' ~ 26 6 12 ~ op_code 0 "C" ~ lun 1 "C" ~ reserved1 2 "C" ~ reserved2 3 "C" ~ eject 4 "C" ~ reserved 5 "[7C" ~ 20 5 14 ~ generic 0 ":" 21 ~ mode_sense 0 ":" 23 ~ format 0 ":" 24 ~ old_format 0 ":" 25 ~ start_stop 0 ":" 26 ~ 19 17 48 ~ num_heads 0 "C" ~ sec_p_track 1 "C" ~ sec_p_cyl 2 "I" ~ num_cylinders 4 "I" ~ max_multiple 6 "C" ~ supports_lba 8 "i" ~ total_lba 10 "L" ~ enable_mapping 14 "i" ~ media_changed 16 "i" ~ volume_start 18 "L" ~ volume_end 22 "L" ~ protocol 26 "C" ~ atapi_packet 28 ":" 20 ~ atapi_packet_size 42 "I" ~ media_descriptor 44 "C" ~ medium_type_code 45 "C" ~ allocation_unit 46 "C" ~ 18 29 138 ~ opencount 0 "i" ~ register_file_address 2 "#I" ~ interrupt_number 6 "i" ~ controller_number 8 "i" ~ command_complete 10 "i" ~ error_code 12 "I" ~ timer 14 "I" ~ block_size 16 "C" ~ sectors_remaining 18 "I" ~ user_address 20 "#C" ~ drive 24 "[2:" 19 ~ vo_write_precomp 120 "C" ~ vo_sector_count 121 "C" ~ vo_sector_number 122 "C" ~ vo_cyl_low 123 "C" ~ vo_cyl_high 124 "C" ~ vo_drive_head 125 "C" ~ vo_feature 126 "C" ~ vo_command 127 "C" ~ vo_dig_out 128 "C" ~ vi_error 129 "C" ~ vi_sector_count 130 "C" ~ vi_sector_number 131 "C" ~ vi_cyl_low 132 "C" ~ vi_cyl_high 133 "C" ~ vi_drive_head 134 "C" ~ vi_status 135 "C" ~ vi_alt_status 136 "C" ~ vi_drive_addr 137 "C" ~ PIDE_CONTROLLER "#:" 18 ~ IDE_CONTROLLER ":" 18 ~ IDE_DRIVE_DESC ":" 19 ~ ATAPI_PACKET ":" 20 ~ ATAPI_PACKET_DESC ":" 21 ~ ATAPI_OLD_FORMAT_UNIT_PACKET_DE ":" 25 ~ ATAPI_START_STOP_UNIT_PACKET_DE ":" 26 ~ ATAPI_FORMAT_UNIT_PACKET_DESC ":" 24 ~ ATAPI_MODE_SENSE_PACKET_DESC ":" 23 ~ 'Himawari_format_descriptor' ~ 'Himawari_defect_list_header' ~ 28 4 4 ~ reserved 0 "C" ~ control_byte 1 "C" ~ length_msb 2 "C" ~ length_lsb 3 "C" ~ 'Himawari_formattable_capacity_d' ~ 29 3 8 ~ number_of_blocks 0 "[4C" ~ reserved 4 "C" ~ block_length 5 "[3C" ~ 27 2 12 ~ dlheader 0 ":" 28 ~ capacity_descriptor 4 ":" 29 ~ HIMAWARI_FORMAT_DESCRIPTOR ":" 27 ~ HIMAWARI_FORMATTABLE_CAPACITY_D ":" 29 ~ HIMAWARI_DEFECT_LIST_HEADER ":" 28 ~ 'himawari_flexible_disk_page' ~ 30 17 32 ~ page_code 0 "C" ~ page_length 1 "C" ~ transfer_rate_msb 2 "C" ~ transfer_rate_lsb 3 "C" ~ number_of_heads 4 "C" ~ sectors_per_track 5 "C" ~ bytes_per_cylinder_msb 6 "C" ~ bytes_per_cylinder_lsb 7 "C" ~ number_of_cylinders_msb 8 "C" ~ number_of_cylinders_lsb 9 "C" ~ reserved1 10 "[10C" ~ motor_off_delay 20 "C" ~ swp_swpp 21 "C" ~ reserved2 22 "[6C" ~ medium_rotation_rate_msb 28 "C" ~ medium_rotation_rate_lsb 29 "C" ~ reserved3 30 "[2C" ~ HIMAWARI_FLEXIBLE_DISK_PAGE ":" 30 ~ TRANSFER_LENGTH ":" 22 ~ BLOCKT "L" ~ 'fmtparms' ~ 31 15 52 ~ oemname 0 "[9c" ~ secpalloc 9 "C" ~ secreserved 10 "I" ~ numfats 12 "C" ~ secpfat 14 "L" ~ fmttype 18 "C" ~ numhide 20 "L" ~ numroot 24 "I" ~ mediadesc 26 "C" ~ secptrk 28 "I" ~ numhead 30 "I" ~ numcyl 32 "I" ~ physical_drive_no 34 "C" ~ binary_volume_label 36 "L" ~ text_volume_label 40 "[12c" ~ FMTPARMS ":" 31 ~ 'freelistinfo' ~ 32 2 8 ~ cluster 0 "L" ~ nclusters 4 "l" ~ FREELISTINFO ":" 32 ~ 'fileseginfo' ~ 33 2 8 ~ block 0 "l" ~ nblocks 4 "l" ~ FILESEGINFO ":" 33 ~ 'stat' ~ 34 12 38 ~ st_dev 0 "i" ~ st_ino 2 "i" ~ st_mode 4 "L" ~ st_nlink 8 "i" ~ st_rdev 10 "i" ~ st_size 12 "L" ~ st_atime 16 ":" 10 ~ st_mtime 20 ":" 10 ~ st_ctime 24 ":" 10 ~ st_blksize 28 "l" ~ st_blocks 32 "l" ~ fattribute 36 "C" ~ STAT ":" 34 ~ 'dstat' ~ 35 14 578 ~ fname 0 "[9c" ~ fext 9 "[4c" ~ lfname 13 "[256C" ~ filename 269 "[15c" ~ fattribute 284 "C" ~ ftime 286 "I" ~ fdate 288 "I" ~ fsize 290 "L" ~ driveno 294 "i" ~ pname 296 "[9C" ~ pext 305 "[4C" ~ path 309 "[260c" ~ pobj 570 "#v" ~ pmom 574 "#v" ~ DSTAT ":" 35 ~ DATESTR ":" 10 ~ PCFD "i" ~ UNICODE "I" ~ IOADDRESS "#I" ~ PFCBYTE "#C" ~ PFCCHAR "#c" ~ PFVOID "#v" ~ PFCHAR "#c" ~ PFDWORD "#L" ~ PFLONG "#l" ~ PFWORD "#I" ~ PFINT "#i" ~ PFBYTE "#C" ~ BOOLEAN "i" ~ dword "L" ~ word "I" ~ byte "C" ~ _memset * "(#v" ~ '' ~ 36 2 8 ~ quot 0 "l" ~ rem 4 "l" ~ '' ~ 37 2 4 ~ quot 0 "i" ~ rem 2 "i" ~ ldiv_t ":" 36 ~ div_t ":" 37 ~ '__stdio' ~ 38 8 22 ~ _bp 0 "#C" ~ _bend 4 "#C" ~ _buff 8 "#C" ~ _flags 12 "I" ~ _unit 14 "c" ~ _bytbuf 15 "C" ~ _buflen 16 "L" ~ _tmpnum 20 "I" ~ _printf * "(i" ~ _fflush * "(i" ~ __iob * "[0:" 38 ~ FILE ":" 38 ~ fpos_t "l" ~ va_list "#c" ~ '' ~ 39 13 46 ~ libVersion 0 "l" ~ ramBase 4 "#c" ~ ramSize 8 "l" ~ ramWaits 12 "i" ~ flashBase 14 "#c" ~ flashSize 18 "l" ~ flashWaits 22 "i" ~ heapBot 24 "#v" ~ heapTop 28 "#v" ~ heapCur 32 "#v" ~ statusReg 36 "I" ~ vectorBase 38 "#v" ~ stackPtr 42 "#v" ~ infoAction "c" ~ TT8info ":" 39 ~ _InitTT8 * "(v" ~ UeeErr "c" ~ '' ~ 40 2 8 ~ secs 0 "L" ~ ticks 4 "l" ~ _SimSetFSys * "(l" ~ time_tt ":" 40 ~ _SerSetBaud * "(l" ~ _SerByteAvail * "(i" ~ _SerGetByte * "(i" ~ XmdmErr "c" ~ FlashErr "c" ~ '' ~ 41 4 24 ~ eSR 0 "I" ~ ePC 2 "L" ~ vectofs 6 "I" ~ states 8 "[8I" ~ '' ~ 42 4 20 ~ preamble 0 "[4I" ~ jump 8 "I" ~ target 10 "L" ~ postamble 14 "[3I" ~ ExcCFramePtr "#:" 42 ~ ExcCFrame ":" 42 ~ ExcStackFrame ":" 41 ~ 'tm' ~ 43 10 20 ~ tm_sec 0 "i" ~ tm_min 2 "i" ~ tm_hour 4 "i" ~ tm_mday 6 "i" ~ tm_mon 8 "i" ~ tm_year 10 "i" ~ tm_wday 12 "i" ~ tm_yday 14 "i" ~ tm_isdst 16 "i" ~ tm_hsec 18 "i" ~ time_t "L" ~ clock_t "L" ~ wchar_t "c" ~ ptrdiff_t "l" ~ size_t "L" ~ PSPErr "c" ~ _PRAM "[8I" ~ bool "c" ~ vfptr "#(v" ~ ptr "#c" ~ ulpv "#L" ~ ulong "L" ~ uspv "#I" ~ unsint "I" ~ ushort "I" ~ ucpv "#C" ~ uchar "C" xref _eeprom_print_setup_data xref _eeprom_set_default_setup_data xref _eeprom_write_setup_data xref _eeprom_read_setup_data xref _memset xref _printf xref _fflush xref _InitTT8 xref _SimSetFSys xref _SerSetBaud xref _SerByteAvail xref _SerGetByte xref .begin dseg xref _setup_data xref __iob end