-- ============================================================= -- = DIGI-IA-MIB : Digi Industrial Automation Protocol MIB = -- = = -- = (c) Copyright 2002 Digi International, Inc. = -- ============================================================= DIGI-IA-MIB DEFINITIONS ::= BEGIN IMPORTS digiIA FROM DIGI-SMI OBJECT-TYPE FROM RFC-1212 IpAddress, Counter FROM RFC1155-SMI; -- digiEnterprise MODULE-IDENTITY -- LAST-UPDATED "0203270100Z" -- ORGANIZATION "Digi International Inc." -- CONTACT-INFO -- " Michael Nicholson -- Postal: Digi International Inc. -- 11001 Bren Road East -- Minnetonka, MN 55343 -- -- Tel: 952-912-3146 -- Fax: 952-912-4952 -- E-mail: Mike.Nicholson@digi.com" -- DESCRIPTION -- "Digi Structure of Management Information MIB" -- ::= { digiProtocols 12 } -- === + Textual Conventions + =========================================== Switch ::= INTEGER { off(1), on(2) } IAProtocol ::= INTEGER { inactive(1), modbusascii(2), modbusrtu(3), df1fullduplex(4), userdefined(5), omronhostlink(6), df1halfduplex(7), omroncompowayf(8), omronfins(9) } IANetProtocol ::= INTEGER { inactive(1), none(2), tcpsocket(3), udpsocket(4), modbtcp(5), abethernet(6), ethernetip(7), modbascii(8), modbrtu(9), df1full(10) } IAType ::= INTEGER { none(1), master(2), slave(3) } IARouteType ::= INTEGER { inactive(1), unconfigured(2), serial(3), network(4) } DisplayString ::= OCTET STRING -- ======================================================================= -- ======================================================================= -- === + IA + ============================================================ -- ======================================================================= -- ======================================================================= iaSerialSettings OBJECT IDENTIFIER ::= { digiIA 11 } iaNetMasterSettings OBJECT IDENTIFIER ::= { digiIA 12 } iaNetSlaveSettings OBJECT IDENTIFIER ::= { digiIA 13 } iaStatistics OBJECT IDENTIFIER ::= { digiIA 14 } iaRouteSettings OBJECT IDENTIFIER ::= { digiIA 15 } -- ======================================================================= -- ======================================================================= -- === + IA Serial Config + ============================================== -- ======================================================================= -- ======================================================================= -- ======================================================================= -- === + IA General Serial Config + ====================================== -- ======================================================================= iaSerialGeneralSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialGeneralSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for serial IA configuration settings" ::= { iaSerialSettings 11 } iaSerialGeneralSettingsEntry OBJECT-TYPE SYNTAX IaSerialGeneralSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of IA settings" INDEX { iaSerialPortIndex } ::= { iaSerialGeneralSettingsTable 1 } IaSerialGeneralSettingsEntry ::= SEQUENCE { iaSerialPortIndex INTEGER, iaSerialPortType IAType, iaSerialPortProtocol IAProtocol, iaSerialMessageTimeout INTEGER, iaSerialNetSlaveList DisplayString, iaSerialRevert INTEGER, iaSerialResetNetSlaves INTEGER, iaSerialAddRouteEntry INTEGER } iaSerialPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialGeneralSettingsEntry 11 } iaSerialPortType OBJECT-TYPE SYNTAX IAType ACCESS read-write STATUS mandatory DESCRIPTION "IA Serial Port Type 2 - master 3 - slave" ::= { iaSerialGeneralSettingsEntry 12 } iaSerialPortProtocol OBJECT-TYPE SYNTAX IAProtocol ACCESS read-write STATUS mandatory DESCRIPTION "IA Serial Port Protocol 1 - inactive, 2 - modbusascii, 3 - modbusrtu, 4 - df1fullduplex, 5 - userdefined, 6 - hostlink, 7 - df1halfduplex 8 - compowayf 9 - fins" ::= { iaSerialGeneralSettingsEntry 13 } iaSerialMessageTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "IA Serial Port Message Timeout in milliseconds. Specifies how long to wait for a response from a given request." ::= { iaSerialGeneralSettingsEntry 14 } iaSerialNetSlaveList OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS obsolete DESCRIPTION "NOTE this object is no longer used. List the active net slaves of the curent port in form of the string with 1-based values separated by comma. '0' - if there are no active netslaves" ::= { iaSerialGeneralSettingsEntry 15 } iaSerialRevert OBJECT-TYPE SYNTAX INTEGER {ready(1), factory(2), nvram(3)} ACCESS read-write STATUS mandatory DESCRIPTION "Factory(2) : This will reset the IA port referenced by index to its factory default values. NVRAM(3) : This will reset the IA port referenced by index to the settings stored in NVRAM (at boot time)" ::= { iaSerialGeneralSettingsEntry 16 } iaSerialResetNetSlaves OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS obsolete DESCRIPTION "NOTE this object is no longer used. Deactivates all netslaves of the current port" ::= { iaSerialGeneralSettingsEntry 17 } iaSerialAddRouteEntry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Adds new unconfigured entry to the route table for the serial master" ::= { iaSerialGeneralSettingsEntry 18 } -- ======================================================================= -- === + IA MODBUS RTU Serial Config + =================================== -- ======================================================================= iaSerialModbusRTUSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialModbusRTUSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for Modbus RTU configuration settings" ::= { iaSerialSettings 12 } iaSerialModbusRTUSettingsEntry OBJECT-TYPE SYNTAX IaSerialModbusRTUSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of Modbus RTU settings" INDEX { iaSerialPortModbusRTUIndex } ::= { iaSerialModbusRTUSettingsTable 1 } IaSerialModbusRTUSettingsEntry ::= SEQUENCE { iaSerialPortModbusRTUIndex INTEGER, iaSerialModbusRTUTimeout INTEGER, iaSerialModbusRTUFixedAddress INTEGER, iaSerialModbusRTUBroadcastFlag INTEGER, iaSerialModbusRTUExtendedTimeout INTEGER, iaSerialModbusRTUExtendedFunctions DisplayString, iaSerialModbusRTUAddExtendedFunctions DisplayString, iaSerialModbusRTURemoveExtendedFunctions DisplayString } iaSerialPortModbusRTUIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialModbusRTUSettingsEntry 11 } iaSerialModbusRTUTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "RTU Timeout in milliseconds" ::= { iaSerialModbusRTUSettingsEntry 12 } iaSerialModbusRTUFixedAddress OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Used to overide the unit address field in a request message. A value of 0 indicates that the unit address field is not overwritten." ::= { iaSerialModbusRTUSettingsEntry 13 } iaSerialModbusRTUBroadcastFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), replace(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates how an incoming modbus broadcast request is handled. A value of 1 indicates the request is thrown away. A value of 2 indicates the request is sent to the slaves without expecting a response. A value of 3 indicates that the message's broadcast address should be replaced with a 1 and treating it as a normal request." ::= { iaSerialModbusRTUSettingsEntry 14 } iaSerialModbusRTUErrorResponseFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, a request that can not be routed or times out will result in an error response. The error response will be either an exception 0xA or 0xB." ::= { iaSerialModbusRTUSettingsEntry 15 } iaSerialModbusRTUExtendedTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Used to handle requests that require special timeout requirements. A request with a function in the extended function list will use this timeout rather than the normal message timeout. The timeout is specified in milliseconds." ::= { iaSerialModbusRTUSettingsEntry 16 } iaSerialModbusRTUExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Used to get or set the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaSerialModbusRTUSettingsEntry 17 } iaSerialModbusRTUAddExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Used to add functions to the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaSerialModbusRTUSettingsEntry 18 } iaSerialModbusRTURemoveExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Used to remove functions from the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaSerialModbusRTUSettingsEntry 19 } -- ======================================================================= -- === + IA DF1 Full Duplex Serial Config + ============================== -- ======================================================================= iaSerialDF1FullDuplexSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialDF1FullDuplexSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for DF1 full-duplex configuration settings" ::= { iaSerialSettings 13 } iaSerialDF1FullDuplexSettingsEntry OBJECT-TYPE SYNTAX IaSerialDF1FullDuplexSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of DF1 full-duplex settings" INDEX { iaSerialPortDF1FullDuplexIndex } ::= { iaSerialDF1FullDuplexSettingsTable 1 } IaSerialDF1FullDuplexSettingsEntry ::= SEQUENCE { iaSerialPortDF1FullDuplexIndex INTEGER, iaSerialDF1FullDuplexChecksum INTEGER, iaSerialDF1FullDuplexAckTimeout INTEGER, iaSerialDF1FullDuplexAckTimeoutLimit INTEGER, iaSerialDF1FullDuplexNakTimeoutLimit INTEGER, iaSerialDF1FullDuplexErrorResponseFlag INTEGER, iaSerialDF1FullDuplexDuplicateDetectFlag INTEGER } iaSerialPortDF1FullDuplexIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialDF1FullDuplexSettingsEntry 11 } iaSerialDF1FullDuplexChecksum OBJECT-TYPE SYNTAX INTEGER { bcc(1), crc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Checksum method" ::= { iaSerialDF1FullDuplexSettingsEntry 12 } iaSerialDF1FullDuplexAckTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout in milliseconds" ::= { iaSerialDF1FullDuplexSettingsEntry 13 } iaSerialDF1FullDuplexAckTimeoutLimit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout limit" ::= { iaSerialDF1FullDuplexSettingsEntry 14 } iaSerialDF1FullDuplexNakTimeoutLimit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Nak timeout limit" ::= { iaSerialDF1FullDuplexSettingsEntry 15 } iaSerialDF1FullDuplexErrorResponseFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, a request that can not be routed or times out will result in an error response." ::= { iaSerialDF1FullDuplexSettingsEntry 16 } iaSerialDF1FullDuplexDuplicateDetectFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, consecutive requests with matching command, source, and tns bytes will get thrown out as specified by the DF1 specification." ::= { iaSerialDF1FullDuplexSettingsEntry 17 } -- ======================================================================= -- === + IA DF1 Half Duplex Serial Config + ============================== -- ======================================================================= iaSerialDF1HalfDuplexSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialDF1HalfDuplexSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for DF1 half-duplex configuration settings" ::= { iaSerialSettings 14 } iaSerialDF1HalfDuplexSettingsEntry OBJECT-TYPE SYNTAX IaSerialDF1HalfDuplexSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of DF1 half-duplex settings" INDEX { iaSerialPortDF1HalfDuplexIndex } ::= { iaSerialDF1HalfDuplexSettingsTable 1 } IaSerialDF1HalfDuplexSettingsEntry ::= SEQUENCE { iaSerialPortDF1HalfDuplexIndex INTEGER, iaSerialDF1HalfDuplexChecksum INTEGER, iaSerialDF1HalfDuplexAckTimeout INTEGER, iaSerialDF1HalfDuplexAckTimeoutLimit INTEGER, iaSerialDF1HalfDuplexPollTimeout INTEGER, iaSerialDF1HalfDuplexPollTimeoutLimit INTEGER, iaSerialDF1HalfDuplexErrorResponseFlag INTEGER, iaSerialDF1HalfDuplexDuplicateDetectFlag INTEGER } iaSerialPortDF1HalfDuplexIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialDF1HalfDuplexSettingsEntry 11 } iaSerialDF1HalfDuplexChecksum OBJECT-TYPE SYNTAX INTEGER { bcc(1), crc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Checksum method" ::= { iaSerialDF1HalfDuplexSettingsEntry 12 } iaSerialDF1HalfDuplexAckTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout in milliseconds" ::= { iaSerialDF1HalfDuplexSettingsEntry 13 } iaSerialDF1HalfDuplexAckTimeoutLimit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout limit" ::= { iaSerialDF1HalfDuplexSettingsEntry 14 } iaSerialDF1HalfDuplexPollTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Poll timeout in milliseconds" ::= { iaSerialDF1HalfDuplexSettingsEntry 15 } iaSerialDF1HalfDuplexPollTimeoutLimit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Poll timeout limit" ::= { iaSerialDF1HalfDuplexSettingsEntry 16 } iaSerialDF1HalfDuplexErrorResponseFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, a request that can not be routed or times out will result in an error response." ::= { iaSerialDF1HalfDuplexSettingsEntry 17 } iaSerialDF1HalfDuplexDuplicateDetectFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, consecutive requests with matching command, source, and tns bytes will get thrown out as specified by the DF1 specification." ::= { iaSerialDF1HalfDuplexSettingsEntry 18 } -- ======================================================================= -- === + IA User Defined Serial Config + ================================= -- ======================================================================= iaSerialUserDefinedSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialUserDefinedSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for User Defined configuration settings" ::= { iaSerialSettings 15 } iaSerialUserDefinedSettingsEntry OBJECT-TYPE SYNTAX IaSerialUserDefinedSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of User Defined settings" INDEX { iaSerialPortUserDefinedIndex } ::= { iaSerialUserDefinedSettingsTable 1 } IaSerialUserDefinedSettingsEntry ::= SEQUENCE { iaSerialPortUserDefinedIndex INTEGER, iaSerialUserDefinedStart DisplayString, iaSerialUserDefinedEnd DisplayString, iaSerialUserDefinedAnsiEscapeFlag INTEGER } iaSerialPortUserDefinedIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialUserDefinedSettingsEntry 11 } iaSerialUserDefinedStart OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Start delimiters characters: first byte in bytes - number of delimiters = /2; next bytes delimiters: first byte 1 - delimiter of any type 0 - delimiter's value is used second byte delimiter's value" ::= { iaSerialUserDefinedSettingsEntry 12 } iaSerialUserDefinedEnd OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "End delimiters characters: first byte in bytes - number of delimiters = /2; next bytes delimiters: first byte 1 - delimiter of any type 0 - delimiter's value is used second byte delimiter's value" ::= { iaSerialUserDefinedSettingsEntry 13 } iaSerialUserDefinedAnsiEscapeFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, protocols that have an ansi escape character as their first character in their end of message pattern will properly ignore the escape character in the message's data payload." ::= { iaSerialUserDefinedSettingsEntry 14 } -- ======================================================================= -- === + IA OMRONHOSTLINK Serial Config + ================================ -- ======================================================================= iaSerialOmronHostLinkSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialOmronHostLinkSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for Omronhostlink configuration settings" ::= { iaSerialSettings 16 } iaSerialOmronHostLinkSettingsEntry OBJECT-TYPE SYNTAX IaSerialOmronHostLinkSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of Omronhostlink settings" INDEX { iaSerialPortOmronHostLinkIndex } ::= { iaSerialOmronHostLinkSettingsTable 1 } IaSerialOmronHostLinkSettingsEntry ::= SEQUENCE { iaSerialPortOmronHostLinkIndex INTEGER, iaSerialOmronHostLinkAckTimeout INTEGER, iaSerialOmronHostLinkAckTimeoutLimit INTEGER } iaSerialPortOmronHostLinkIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialOmronHostLinkSettingsEntry 11 } iaSerialOmronHostLinkAckTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout in milliseconds" ::= { iaSerialOmronHostLinkSettingsEntry 12 } iaSerialOmronHostLinkAckTimeoutLimit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout limit" ::= { iaSerialOmronHostLinkSettingsEntry 13 } -- ======================================================================= -- === + IA OMRONFINS Serial Config + ==================================== -- ======================================================================= iaSerialOmronFinsSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialOmronFinsSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for Omronhostlink configuration settings" ::= { iaSerialSettings 17 } iaSerialOmronFinsSettingsEntry OBJECT-TYPE SYNTAX IaSerialOmronFinsSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of Omronhostlink settings" INDEX { iaSerialPortOmronFinsIndex } ::= { iaSerialOmronFinsSettingsTable 1 } IaSerialOmronFinsSettingsEntry ::= SEQUENCE { iaSerialPortOmronFinsIndex INTEGER, iaSerialOmronFinsAckTimeout INTEGER, iaSerialOmronFinsAckTimeoutLimit INTEGER } iaSerialPortOmronFinsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialOmronFinsSettingsEntry 11 } iaSerialOmronFinsAckTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout in milliseconds" ::= { iaSerialOmronFinsSettingsEntry 12 } iaSerialOmronFinsAckTimeoutLimit OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Ack timeout limit" ::= { iaSerialOmronFinsSettingsEntry 13 } -- ======================================================================= -- === + IA MODBUS ASCII Serial Config + =================================== -- ======================================================================= iaSerialModbusAsciiSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaSerialModbusAsciiSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for Modbus Ascii configuration settings" ::= { iaSerialSettings 18 } iaSerialModbusAsciiSettingsEntry OBJECT-TYPE SYNTAX IaSerialModbusAsciiSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by port number of Modbus Ascii settings" INDEX { iaSerialPortModbusAsciiIndex } ::= { iaSerialModbusAsciiSettingsTable 1 } IaSerialModbusAsciiSettingsEntry ::= SEQUENCE { iaSerialPortModbusAsciiIndex INTEGER, iaSerialModbusAsciiFixedAddress INTEGER, iaSerialModbusAsciiBroadcastFlag INTEGER, iaSerialModbusAsciiExtendedTimeout INTEGER, iaSerialModbusAsciiExtendedFunctions DisplayString, iaSerialModbusAsciiAddExtendedFunctions DisplayString, iaSerialModbusAsciiRemoveExtendedFunctions DisplayString } iaSerialPortModbusAsciiIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Serial Port Index" ::= { iaSerialModbusAsciiSettingsEntry 11 } iaSerialModbusAsciiFixedAddress OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "Used to overide the unit address field in a request message. A value of 0 indicates that the unit address field is not overwritten." ::= { iaSerialModbusAsciiSettingsEntry 12 } iaSerialModbusAsciiBroadcastFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), replace(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates how an incoming modbus broadcast request is handled. A value of 1 indicates the request is thrown away. A value of 2 indicates the request is sent to the slaves without expecting a response. A value of 3 indicates that the message's broadcast address should be replaced with a 1 and treating it as a normal request." ::= { iaSerialModbusAsciiSettingsEntry 13 } iaSerialModbusAsciiErrorResponseFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, a request that can not be routed or times out will result in an error response. The error response will be either an exception 0xA or 0xB." ::= { iaSerialModbusAsciiSettingsEntry 14 } iaSerialModbusAsciiExtendedTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Used to handle requests that require special timeout requirements. A request with a function in the extended function list will use this timeout rather than the normal message timeout. The timeout is specified in milliseconds." ::= { iaSerialModbusAsciiSettingsEntry 15 } iaSerialModbusAsciiExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Used to get or set the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaSerialModbusAsciiSettingsEntry 16 } iaSerialModbusAsciiAddExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Used to add functions to the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaSerialModbusAsciiSettingsEntry 17 } iaSerialModbusAsciiRemoveExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Used to remove functions from the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaSerialModbusAsciiSettingsEntry 18 } -- ======================================================================= -- ======================================================================= -- === + IA Net Master Config + ========================================== -- ======================================================================= -- ======================================================================= -- ======================================================================= -- === + IA General Master Config + ====================================== -- ======================================================================= iaNetMasterGeneralSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaNetMasterGeneralSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for network master IA configuration settings" ::= { iaNetMasterSettings 11 } iaNetMasterGeneralSettingsEntry OBJECT-TYPE SYNTAX IaNetMasterGeneralSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by network master number" INDEX { iaNetMasterIndex } ::= { iaNetMasterGeneralSettingsTable 1 } IaNetMasterGeneralSettingsEntry ::= SEQUENCE { iaNetMasterIndex INTEGER, iaNetMasterProtocol IANetProtocol } iaNetMasterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Net Master Index" ::= { iaNetMasterGeneralSettingsEntry 11 } iaNetMasterProtocol OBJECT-TYPE SYNTAX IANetProtocol ACCESS read-write STATUS mandatory DESCRIPTION "Net master protocol" ::= { iaNetMasterGeneralSettingsEntry 12 } -- ======================================================================= -- === + IA Modbus/TCP Master Config + =================================== -- ======================================================================= iaNetMasterModbusTCPSettings OBJECT IDENTIFIER ::= { iaNetMasterSettings 12 } iaNetMasterModbusTCPMessageTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Modbus TCP message timeout in milliseconds. Specifies how long to wait for a response from a given request." ::= { iaNetMasterModbusTCPSettings 11 } iaNetMasterModbusTCPConnectTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The connect timeout is used to hangup an idle connection. A value of 0 disables this from occurring. The timeout is specified in milliseconds." ::= { iaNetMasterModbusTCPSettings 12 } iaNetMasterModbusTCPActiveFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A value of on indicates that the device is listening on tcp port 502 for ModbusTCP data." ::= { iaNetMasterModbusTCPSettings 13 } iaNetMasterModbusTCPBroadcastFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), replace(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates how an incoming modbus broadcast request is handled. A value of 1 indicates the request is thrown away. A value of 2 indicates the request is sent to the slaves without expecting a response. A value of 3 indicates that the message's broadcast address should be replaced with a 1 and treating it as a normal request." ::= { iaNetMasterModbusTCPSettings 14 } iaNetMasterModbusTCPErrorResponseFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), replace(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, a request that can not be routed or times out will result in an error response. The error response will be either an exception 0xA or 0xB." ::= { iaNetMasterModbusTCPSettings 15 } iaNetMasterModbusTCPExtendedTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Used to handle requests that require special timeout requirements. A request with a function in the extended function list will use this timeout rather than the normal message timeout. The timeout is specified in milliseconds." ::= { iaNetMasterModbusTCPSettings 16 } iaNetMasterModbusTCPExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Used to get or set the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaNetMasterModbusTCPSettings 17 } iaNetMasterModbusTCPAddExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Used to add functions to the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaNetMasterModbusTCPSettings 18 } iaNetMasterModbusTCPRemoveExtendedFunctions OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Used to remove functions from the list of Modbus functions that use the extended timeout instead of the normal message timeout." ::= { iaNetMasterModbusTCPSettings 19 } -- ======================================================================= -- === + IA ABEthernet Master Config + =================================== -- ======================================================================= iaNetMasterABEthernetSettings OBJECT IDENTIFIER ::= { iaNetMasterSettings 13 } iaNetMasterABEthernetMessageTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "AB Ethernet message timeout in milliseconds. Specifies how long to wait for a response for a given request." ::= { iaNetMasterABEthernetSettings 11 } iaNetMasterABEthernetConnectTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The connect timeout is used to hangup an idle connection. A value of 0 disables this from occurring. The timeout is specified in milliseconds." ::= { iaNetMasterABEthernetSettings 12 } iaNetMasterABEthernetActiveFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A value of on indicates that the device is listening on tcp port 2222 for ABEthernet data." ::= { iaNetMasterABEthernetSettings 13 } iaNetMasterABEthernetErrorResponseFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), replace(3) } ACCESS read-write STATUS mandatory DESCRIPTION "When this mib is on, a request that can not be routed or times out will result in an error response." ::= { iaNetMasterABEthernetSettings 14 } -- ======================================================================= -- === + IA EthernetIP Master Config + =================================== -- ======================================================================= iaNetMasterEthernetIPSettings OBJECT IDENTIFIER ::= { iaNetMasterSettings 14 } iaNetMasterEthernetIPMessageTimeout OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "EthernetIP message timeout in milliseconds. Specifies how long to wait for a response for a given request." ::= { iaNetMasterEthernetIPSettings 11 } iaNetMasterEthernetIPActiveFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A value of on indicates that the device is listening on ip port 44818 for EthernetIP data." ::= { iaNetMasterEthernetIPSettings 12 } -- ======================================================================= -- ======================================================================= -- === + OBSOLETE IA Net Slave Config + ================================== -- ======================================================================= -- ======================================================================= iaNetSlaveGeneralSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaNetSlaveGeneralSettingsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteNetSlaveX mib. Table for network Slave IA configuration settings" ::= { iaNetSlaveSettings 11 } iaNetSlaveGeneralSettingsEntry OBJECT-TYPE SYNTAX IaNetSlaveGeneralSettingsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteNetSlaveX mib. An entry indexed by network Slave number" INDEX { iaNetSlaveIndex } ::= { iaNetSlaveGeneralSettingsTable 1 } IaNetSlaveGeneralSettingsEntry ::= SEQUENCE { iaNetSlaveIndex INTEGER, iaNetSlaveProtocol IANetProtocol, iaNetSlaveIpAddress IpAddress, iaNetSlaveIpPort INTEGER, iaNetSlaveReconnectTime INTEGER, iaNetSlaveName DisplayString } iaNetSlaveIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteIndex mib. IA Net Slave Index" ::= { iaNetSlaveGeneralSettingsEntry 11 } iaNetSlaveProtocol OBJECT-TYPE SYNTAX IANetProtocol ACCESS read-write STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteNetSlaveProtocol mib. IA Net Slave Protocol Index: 1 - inactive, 2 - none, 3 - tcpsocket, 4 - udpsocket, 5 modbustcp, 6 abethernet, 7 - ethernetip" ::= { iaNetSlaveGeneralSettingsEntry 12 } iaNetSlaveIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteNetSlaveIpAddress mib. Connection Timeout" ::= { iaNetSlaveGeneralSettingsEntry 13 } iaNetSlaveIpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteNetSlaveIpPort mib. IP Address of this net slave" ::= { iaNetSlaveGeneralSettingsEntry 14 } iaNetSlaveReconnectTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteNetSlaveReconnectTime mib. Reconnect timeout" ::= { iaNetSlaveGeneralSettingsEntry 15 } iaNetSlaveName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete and has been replaced by the iaRouteDescription mib. Name of this net slave" ::= { iaNetSlaveGeneralSettingsEntry 16 } iaNetSlaveActivateNextFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "NOTE, this is mib is obsolete. Activates next free slave for the given 1-based port number" ::= { iaNetSlaveSettings 12 } -- ======================================================================= -- ======================================================================= -- === + IA Statistics + ================================================= -- ======================================================================= -- ======================================================================= iaStatisticsClear OBJECT-TYPE SYNTAX Switch ACCESS read-write STATUS mandatory DESCRIPTION "(2) On : Clears IA Statistics" ::= { iaStatistics 10 } iaStatisticsModbus OBJECT IDENTIFIER ::= { iaStatistics 11 } iaStatisticsDF1FullDuplex OBJECT IDENTIFIER ::= { iaStatistics 12 } iaStatisticsOmronHostLink OBJECT IDENTIFIER ::= { iaStatistics 13 } iaStatisticsOmronFins OBJECT IDENTIFIER ::= { iaStatistics 14 } iaStatisticsOmronCompowayf OBJECT IDENTIFIER ::= { iaStatistics 15 } iaStatisticsUserDefined OBJECT IDENTIFIER ::= { iaStatistics 16 } iaStatisticsDF1HalfDuplex OBJECT IDENTIFIER ::= { iaStatistics 17 } -- ======================================================================= -- === + Modbus Statistics + ============================================= -- ======================================================================= modbusResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsModbus 11 } modbusConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsModbus 12 } modbusBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsModbus 13 } modbusBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsModbus 14 } modbusRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsModbus 15 } modbusResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsModbus 16 } modbusMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsModbus 17 } modbusChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsModbus 18 } modbusValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsModbus 19 } modbusValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsModbus 20 } modbusNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsModbus 21 } modbusActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsModbus 22 } modbusActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsModbus 23 } -- ======================================================================= -- === + DF1 Full Duplex Statistics + ==================================== -- ======================================================================= df1FullDuplexResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsDF1FullDuplex 11 } df1FullDuplexConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsDF1FullDuplex 12 } df1FullDuplexBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsDF1FullDuplex 13 } df1FullDuplexBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsDF1FullDuplex 14 } df1FullDuplexRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsDF1FullDuplex 15 } df1FullDuplexResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsDF1FullDuplex 16 } df1FullDuplexMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsDF1FullDuplex 17 } df1FullDuplexChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsDF1FullDuplex 18 } df1FullDuplexValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsDF1FullDuplex 19 } df1FullDuplexValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsDF1FullDuplex 20 } df1FullDuplexNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsDF1FullDuplex 21 } df1FullDuplexActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsDF1FullDuplex 22 } df1FullDuplexActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsDF1FullDuplex 23 } -- ======================================================================= -- === + OMRON HOST Link Statistics + ==================================== -- ======================================================================= omronHostLinkResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsOmronHostLink 11 } omronHostLinkConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsOmronHostLink 12 } omronHostLinkBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsOmronHostLink 13 } omronHostLinkBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsOmronHostLink 14 } omronHostLinkRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsOmronHostLink 15 } omronHostLinkResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsOmronHostLink 16 } omronHostLinkMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsOmronHostLink 17 } omronHostLinkChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsOmronHostLink 18 } omronHostLinkValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsOmronHostLink 19 } omronHostLinkValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsOmronHostLink 20 } omronHostLinkNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsOmronHostLink 21 } omronHostLinkActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsOmronHostLink 22 } omronHostLinkActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsOmronHostLink 23 } -- ======================================================================= -- === + OMRON FINS Statistics + ========================================= -- ======================================================================= omronFinsResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsOmronFins 11 } omronFinsConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsOmronFins 12 } omronFinsBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsOmronFins 13 } omronFinsBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsOmronFins 14 } omronFinsRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsOmronFins 15 } omronFinsResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsOmronFins 16 } omronFinsMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsOmronFins 17 } omronFinsChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsOmronFins 18 } omronFinsValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsOmronFins 19 } omronFinsValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsOmronFins 20 } omronFinsNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsOmronFins 21 } omronFinsActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsOmronFins 22 } omronFinsActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsOmronFins 23 } -- ======================================================================= -- === + OMRON Compowayf Statistics + ==================================== -- ======================================================================= omronCompowayfResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsOmronCompowayf 11 } omronCompowayfConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsOmronCompowayf 12 } omronCompowayfBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsOmronCompowayf 13 } omronCompowayfBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsOmronCompowayf 14 } omronCompowayfRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsOmronCompowayf 15 } omronCompowayfResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsOmronCompowayf 16 } omronCompowayfMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsOmronCompowayf 17 } omronCompowayfChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsOmronCompowayf 18 } omronCompowayfValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsOmronCompowayf 19 } omronCompowayfValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsOmronCompowayf 20 } omronCompowayfNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsOmronCompowayf 21 } omronCompowayfActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsOmronCompowayf 22 } omronCompowayfActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsOmronCompowayf 23 } -- ======================================================================= -- === + User Defined Statistics + ======================================= -- ======================================================================= userDefinedResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsUserDefined 11 } userDefinedConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsUserDefined 12 } userDefinedBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsUserDefined 13 } userDefinedBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsUserDefined 14 } userDefinedRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsUserDefined 15 } userDefinedResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsUserDefined 16 } userDefinedMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsUserDefined 17 } userDefinedChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsUserDefined 18 } userDefinedValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsUserDefined 19 } userDefinedValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsUserDefined 20 } userDefinedNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsUserDefined 21 } userDefinedActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsUserDefined 22 } userDefinedActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsUserDefined 23 } -- ======================================================================= -- === + DF1 Half Duplex Statistics + ==================================== -- ======================================================================= df1HalfDuplexResourceErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Resource errors" ::= { iaStatisticsDF1HalfDuplex 11 } df1HalfDuplexConfigurationErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Configuration errors" ::= { iaStatisticsDF1HalfDuplex 12 } df1HalfDuplexBadRequestMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad request message errors" ::= { iaStatisticsDF1HalfDuplex 13 } df1HalfDuplexBadResponseMessageErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bad response message errors" ::= { iaStatisticsDF1HalfDuplex 14 } df1HalfDuplexRequestMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Request message dropped errors" ::= { iaStatisticsDF1HalfDuplex 15 } df1HalfDuplexResponseMessageDroppedErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Response message dropped errors" ::= { iaStatisticsDF1HalfDuplex 16 } df1HalfDuplexMessageTimeoutErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Message Timeout errors" ::= { iaStatisticsDF1HalfDuplex 17 } df1HalfDuplexChecksumErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Checksum errors" ::= { iaStatisticsDF1HalfDuplex 18 } df1HalfDuplexValidRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid requests" ::= { iaStatisticsDF1HalfDuplex 19 } df1HalfDuplexValidResponses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Valid responses" ::= { iaStatisticsDF1HalfDuplex 20 } df1HalfDuplexNetworkHangups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Network hangups" ::= { iaStatisticsDF1HalfDuplex 21 } df1HalfDuplexActiveMasterConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active master connections" ::= { iaStatisticsDF1HalfDuplex 22 } df1HalfDuplexActiveSlaveConnections OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Active slave connections" ::= { iaStatisticsDF1HalfDuplex 23 } -- ======================================================================= -- ======================================================================= -- === + IA Route Config + =============================================== -- ======================================================================= -- ======================================================================= iaRouteGeneralSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaRouteGeneralSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for IA routing settings" ::= { iaRouteSettings 11 } iaRouteGeneralSettingsEntry OBJECT-TYPE SYNTAX IaRouteGeneralSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry indexed by the route number" INDEX { iaRouteIndex } ::= { iaRouteGeneralSettingsTable 1 } IaRouteGeneralSettingsEntry ::= SEQUENCE { iaRouteIndex INTEGER, iaRouteDestinationType IARouteType, iaRouteDestinationIndex INTEGER, iaRouteTransmitAllMessages Switch, iaRouteTransmitMinRange INTEGER, iaRouteTransmitMaxRange INTEGER, iaRouteNetSlaveProtocol IANetProtocol, iaRouteNetSlaveIpAddress IpAddress, iaRouteNetSlaveIpPort INTEGER, iaRouteNetSlaveReconnectTime INTEGER, iaRouteDescription DisplayString, iaRouteRemoveEntry INTEGER } iaRouteIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IA Route Index" ::= { iaRouteGeneralSettingsEntry 11 } iaRouteDestinationType OBJECT-TYPE SYNTAX IARouteType ACCESS read-write STATUS mandatory DESCRIPTION "Destination type of the IA Route table entry: 1 - inactive, 2- unconfigured, 3 - serial, 4 - network" ::= { iaRouteGeneralSettingsEntry 12 } iaRouteDestinationIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1-based index of the current type (serial or network) destination. By setting can be used only for serial slave changes, destination type of this entry will be changed to serial" ::= { iaRouteGeneralSettingsEntry 13 } iaRouteTransmitAllMessages OBJECT-TYPE SYNTAX Switch ACCESS read-write STATUS mandatory DESCRIPTION "(2) On : transmit all messages (1) Off : transmit only messages matches the address range" ::= { iaRouteGeneralSettingsEntry 14 } iaRouteTransmitMinRange OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The lowest transmit protocol address allowed. Messages with a protocol address below the MinRange are not routed to this entry." ::= { iaRouteGeneralSettingsEntry 15 } iaRouteTransmitMaxRange OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The highest transmit protocol address allowed. Messages with a protocol address above the MaxRange are not routed to this entry." ::= { iaRouteGeneralSettingsEntry 16 } iaRouteNetSlaveProtocol OBJECT-TYPE SYNTAX IANetProtocol ACCESS read-write STATUS mandatory DESCRIPTION "IA Net Slave Protocol Index: 1 - inactive, 2 - none, 3 - tcpsocket, 4 - udpsocket, 5 modbustcp, 6 abethernet, 7 - ethernetip" ::= { iaRouteGeneralSettingsEntry 17 } iaRouteNetSlaveIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address of the net slave." ::= { iaRouteGeneralSettingsEntry 18 } iaRouteNetSlaveIpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IP Port of the net slave" ::= { iaRouteGeneralSettingsEntry 19 } iaRouteNetSlaveReconnectTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The reconnect time is used by a netslave that is not connected to a remote destination. It specifies how long the netslave should wait before trying to reconnect to the remote destination." ::= { iaRouteGeneralSettingsEntry 20 } iaRouteDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Description of the route entry." ::= { iaRouteGeneralSettingsEntry 21 } iaRouteRemoveEntry OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Current entry will be removed from the routing table. If destination is netslave and it isn't more used for any routes - that netslave will be deactivated" ::= { iaRouteGeneralSettingsEntry 22 } iaRouteNetSlaveModbusTCPSettingsTable OBJECT-TYPE SYNTAX SEQUENCE OF IaRouteNetSlaveModbusTCPSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for Modbus TCP netslave route settings" ::= { iaRouteSettings 12 } iaRouteNetSlaveModbusTCPSettingsEntry OBJECT-TYPE SYNTAX IaRouteNetSlaveModbusTCPSettingsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ModbusTCP route entry indexed by the route number." INDEX { iaRouteNetSlaveModbusTCPIndex } ::= { iaRouteNetSlaveModbusTCPSettingsTable 1 } IaRouteNetSlaveModbusTCPSettingsEntry ::= SEQUENCE { iaRouteNetSlaveModbusTCPIndex INTEGER, iaRouteNetSlaveModbusTCPFixedAddress INTEGER } iaRouteNetSlaveModbusTCPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Route index." ::= { iaRouteNetSlaveModbusTCPSettingsEntry 11 } iaRouteNetSlaveModbusTCPFixedAddress OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Used to overide the unit address field in a request message. A value of 0 indicates that the unit address field is not overwritten." ::= { iaRouteNetSlaveModbusTCPSettingsEntry 12 } END