# /etc/ntp.conf, configuration for ntpd

driftfile /var/lib/ntp/ntp.drift
statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

# pool.ntp.org maps to more than 300 low-stratum NTP servers.
# Your server will pick a different set every time it starts up.
#  *** Please consider joining the pool! ***
#  *** <http://www.pool.ntp.org/join.html> ***
#server 0.debian.pool.ntp.org iburst
#server 1.debian.pool.ntp.org iburst
#server 2.debian.pool.ntp.org iburst
#server 3.debian.pool.ntp.org iburst

# I commented out the above default debian configuration,
# and replaced it with the standard MBARI NTP configuration.
# Note that this is for the shore network.  This needs to
# be changed for deployment.
# 6 May 2008, rah
#server ntp.pl.mbari.org version 3 prefer
server Time-sh1.shore.mbari.org version 3 prefer
server Time-sh2.shore.mbari.org version 3
server Time-sh3.shore.mbari.org version 3
server Time-sh4.shore.mbari.org version 3

# By default, exchange time with everybody, but don't allow configuration.
# See /usr/share/doc/ntp-doc/html/accopt.html for details.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access,
# but only if cryptographically authenticated
#restrict 192.168.123.0  mask  255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet,
# de-comment the next lines. Please do this only if you trust everybody
# on the network!
disable auth
broadcastclient
