.. ORE LXT System Model 4430 Rev # 2.00E # SR(m) BRG DA HDG DEPTH TEL WARN h * ERROR: Invalid Data (null) TRY AGAIN helpo * ERROR: Invalid Data (null) TRY AGAIN help * ERROR: Invalid Data (null) TRY AGAIN help * ERROR: Invalid Data (null) TRY AGAIN \\h * ERROR: Invalid Data (null) TRY AGAIN h * ERROR: Invalid Data (null) TRY AGAIN trk1 ENTERED VALUE = 1 TRK = ON sel1 ENTERED VALUE = 1 SEL = TG1 Primary Help (HLP) Menu 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_C: System Reset (use with care) CTRL_E: Event Mark CTRL_X: Restore Suspended Tracking HLP=display HeLP ,n=1:TRG,2:SYS,3:WARN CFG=show config info, ( SELected target ) MSG=display MeSsaGe , display text on LCD TST=select TeST , n = test number hlp 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_C: System Reset (use with care) CTRL_E: Event Mark CTRL_X: Restore Suspended Tracking HLP=display HeLP ,n=1:TRG,2:SYS,3:WARN CFG=show config info, ( SELected target ) MSG=display MeSsaGe , display text on LCD TST=select TeST , n = test number cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 hlp 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_C: System Reset (use with care) CTRL_E: Event Mark CTRL_X: Restore Suspended Tracking HLP=display HeLP ,n=1:TRG,2:SYS,3:WARN CFG=show config info, ( SELected target ) MSG=display MeSsaGe , display text on LCD TST=select TeST , n = test number tst TST=select TeST , n = test number tst1 ENTERED VALUE = 1 TST = BDS Please Wait... TEST COMPLETED, returning to normal operation. tst2 ENTERED VALUE = 2 TST = SPB Hit any key to end test TEST RESULTS: 8 Passes, 0 Errors TEST COMPLETED, returning to normal operation. tst3 ENTERED VALUE = 3 TST = CPU Hit any key to end test TEST RESULTS: 4 Passes, 0 Errors TEST COMPLETED, returning to normal operation. tst4 ENTERED VALUE = 4 TST = RAM Hit any key to end test TEST RESULTS: 1 Passes, 0 Errors TEST COMPLETED, returning to normal operation. tst5 ENTERED VALUE = 5 TST = ROM Hit any key to end test TEST RESULTS: 19 Passes, 0 Errors TEST COMPLETED, returning to normal operation. tst6 ENTERED VALUE = 6 TST = NVR Hit any key to end test TEST RESULTS: 6 Passes, 0 Errors TEST COMPLETED, returning to normal operation. tst7 ENTERED VALUE = 7 TST = BIT Hit any key to end test 8 56.0 0.0 90.0 8 56.0 0.0 90.0 8 56.0 0.0 90.0 8 56.0 0.0 90.0 8 56.0 0.0 90.0 8 56.0 0.0 90.0 TEST COMPLETED, returning to normal operation. tst8 * ERROR: Out of Range TST=select TeST , n = test number TRY AGAIN cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 1 1426.6 103.5 58.2 6 tst15 * ERROR: Out of Range TST=select TeST , n = test number TRY AGAIN tat15 NEW VALUE = 15.0 cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 15.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 tat30 NEW VALUE = 30.0 cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 1 650.8 18.7 84.1 1 775.6 168.6 77.4 xmt29.0 * ERROR: Invalid Data (null) TRY AGAIN xmt29 * ERROR: Invalid Data (null) TRY AGAIN cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 Primary Help (HLP) Menu 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_C: System Reset (use with care) CTRL_E: Event Mark CTRL_X: Restore Suspended Tracking HLP=display HeLP ,n=1:TRG,2:SYS,3:WARN CFG=show config info, ( SELected target ) MSG=display MeSsaGe , display text on LCD TST=select TeST , n = test number help1 * ERROR: Invalid Data (null) TRY AGAIN hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees xfr29 NEW VALUE = 29.0 tat5 NEW VALUE = 5.0 1 0.8 0.0 80.6 1 1.5 354.9 80.8 1 2.3 356.9 80.1 1 3.1 355.6 80.4 1 3.1 353.3 82.6 1 3.1 350.7 82.2 1 3.1 345.3 83.2 1 3.1 347.9 81.2 1 3.1 347.6 80.9 1 3.1 351.4 81.3 tat0 * ERROR: Out of Range TAT=Turn Around Time, enter time in mSec TRY AGAIN tat1 NEW VALUE = 1.0 1 3.8 351.2 81.5 1 4.6 352.8 82.6 1 5.3 354.8 82.7 1 6.1 356.5 81.4 1 6.1 355.1 81.3 tat10 NEW VALUE = 10.0 tat5 NEW VALUE = 5.0 1 0.8 0.9 80.7 1 1.5 355.3 80.9 1 2.3 354.8 81.0 cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 29.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 5.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 1 3.1 354.5 81.2 hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees 1 3.1 349.8 83.7 1 3.1 350.5 83.5 xri2.1 NEW VALUE = 2.1 1 3.1 349.2 82.1 1 3.1 345.0 81.6 1 3.1 350.7 79.7 1 3.1 356.2 75.7 1 3.1 355.2 75.9 1 3.1 356.7 75.9 1 3.1 353.8 77.7 1 3.1 344.9 81.8 cfg1 TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 29.0 kHz Pulse = 10.0 mS Interval = 2.1 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 5.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees 1 3.1 345.8 82.8 1 3.1 350.3 81.9 trk0 ENTERED VALUE = 0 TRK = OFF 2 817.6 349.9 62.7 6 2 1149.4 175.3 66.5 6 xfr26 NEW VALUE = 26.0 trk1 ENTERED VALUE = 1 TRK = ON cfg1 TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.1 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 5.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 tat30 NEW VALUE = 30.0 cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.1 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 cfg2 TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.1 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees xri2 NEW VALUE = 2.0 hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees hlp3 Warning Code Descriptions: 1. Unusable signal received. 2. Range-gate error. 3. No slant range available. 5. Excessive Target velocity. 6. No recent replies. 8. Simultaneous reply interference error. 21. Unusable telemetry signal. 22. Telemetry range-gate error. 23. Telemetry timing out of range. 26. No recent telemetry replies. hlp2 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking FIL=FILtering level , n=0:Low,1:Med,2:Hi KEY=xmit KEYing mode, n=0:INT, n=1:EXT REP=master REP intvl, n=0:2,1:4,2:6,3:8 SCA=SCAling units , n=0:M,1:Y,2:F CMP=CoMPass enable , n=0:OFF, n=1:ON AND=ANalog Depth enb, n=0:OFF, n=1:ON BLT=Back LighT ctrl , n=0:OFF, n=1:ON CVL=Compass volts LO, enter voltage CVH=Compass volts HI, enter voltage DVL=Depth volts LO , enter voltage DVH=Depth volts HI , enter voltage DSP=Depth SPan , enter value BDR=rs232 BauD Rate ,0:2400,1:4800,2:9600 SCL=rs232 SCaLing , n=0:M,1:Y,2:F fil1 ENTERED VALUE = 1 FIL = MED fil0 ENTERED VALUE = 0 FIL = LO hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees hlp2 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking FIL=FILtering level , n=0:Low,1:Med,2:Hi KEY=xmit KEYing mode, n=0:INT, n=1:EXT REP=master REP intvl, n=0:2,1:4,2:6,3:8 SCA=SCAling units , n=0:M,1:Y,2:F CMP=CoMPass enable , n=0:OFF, n=1:ON AND=ANalog Depth enb, n=0:OFF, n=1:ON BLT=Back LighT ctrl , n=0:OFF, n=1:ON CVL=Compass volts LO, enter voltage CVH=Compass volts HI, enter voltage DVL=Depth volts LO , enter voltage DVH=Depth volts HI , enter voltage DSP=Depth SPan , enter value BDR=rs232 BauD Rate ,0:2400,1:4800,2:9600 SCL=rs232 SCaLing , n=0:M,1:Y,2:F hlp 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_C: System Reset (use with care) CTRL_E: Event Mark CTRL_X: Restore Suspended Tracking HLP=display HeLP ,n=1:TRG,2:SYS,3:WARN CFG=show config info, ( SELected target ) MSG=display MeSsaGe , display text on LCD TST=select TeST , n = test number hlp0 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_C: System Reset (use with care) CTRL_E: Event Mark CTRL_X: Restore Suspended Tracking HLP=display HeLP ,n=1:TRG,2:SYS,3:WARN CFG=show config info, ( SELected target ) MSG=display MeSsaGe , display text on LCD TST=select TeST , n = test number hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees 1 1137.2 345.7 43.8 6 thr2 ENTERED VALUE = 2 THR = MHI thr1 ENTERED VALUE = 1 THR = MLO thr3 ENTERED VALUE = 3 THR = HI thr0 ENTERED VALUE = 0 THR = LO cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 2 793.1 91.7 71.1 6 1 770.9 293.6 71.9 6 2 1038.2 218.9 75.8 6 1 218.3 203.8 71.4 6 CPU speed: TURBO Welcome to the ORE LXT System Initializing..... CPU speed: TURBO Welcome to the ORE LXT System Initializing......... ORE LXT System Model 4430 Rev # 2.00E # SR(m) BRG DA HDG DEPTH TEL WARN hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees sel2 ENTERED VALUE = 2 SEL = TG2 cfg TARGET #2 * Tracking: ON Type: TRAN XMITTER * Freq = 17.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 30.0 kHz * Threshold: LO Filtering: LO TAT = 15.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 xfr29 NEW VALUE = 29.0 2 567.0 101.7 71.7 rfr26 NEW VALUE = 26.0 cfg TARGET #2 * Tracking: ON Type: TRAN XMITTER * Freq = 29.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 26.0 kHz * Threshold: LO Filtering: LO TAT = 15.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 2 970.0 332.6 63.5 6 tat5 NEW VALUE = 5.0 2 1003.8 191.6 41.1 tat20 NEW VALUE = 20.0 cfg TARGET #2 * Tracking: ON Type: TRAN XMITTER * Freq = 29.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 26.0 kHz * Threshold: LO Filtering: LO TAT = 20.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 2 431.3 214.9 82.8 6 2 395.1 314.9 78.0 sel1 ENTERED VALUE = 1 SEL = TG1 cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 trk0 ENTERED VALUE = 0 TRK = OFF sel2 ENTERED VALUE = 2 SEL = TG2 cfg TARGET #2 * Tracking: ON Type: TRAN XMITTER * Freq = 29.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 26.0 kHz * Threshold: LO Filtering: LO TAT = 20.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 2 1091.6 305.6 77.8 6 xfr26] NEW VALUE = 26.0 2 579.0 305.9 64.7 2 396.9 302.2 61.7 2 302.6 304.4 62.9 rfr29 NEW VALUE = 29.0 2 30.9 141.0 49.2 2 15.1 255.7 41.4 2 7.8 146.7 34.8 2 3.8 181.6 23.1 2 3.8 181.8 23.4 2 3.8 181.1 26.0 2 3.8 181.2 26.0 2 3.9 179.7 26.2 2 3.7 179.1 23.8 2 3.6 178.6 22.6 2 3.6 177.6 23.5 2 3.5 179.2 26.8 2 3.3 180.6 36.7 2 3.4 180.3 35.2 2 3.5 181.4 38.1 2 3.5 181.0 37.8 2 3.6 180.0 32.0 2 3.8 179.5 33.8 2 3.8 180.1 30.0 2 3.8 179.4 30.4 2 3.7 180.2 28.2 2 3.5 181.2 24.1 2 3.4 179.9 21.4 2 3.4 181.2 22.5 2 3.4 177.7 28.5 2 3.5 177.7 35.6 2 3.5 177.8 38.0 2 3.5 176.7 34.8 2 3.6 177.9 31.7 2 3.6 177.9 27.2 2 3.6 178.0 26.9 2 3.5 177.9 26.9 2 3.5 178.9 18.6 2 3.5 177.8 13.3 2 4.1 175.5 23.7 2 290.2 22.7 80.8 2 646.8 4.7 61.2 2 765.6 14.7 48.7 2 825.0 12.7 50.9 2 1003.2 19.4 47.8 2 1003.1 22.4 42.7 2 1003.3 21.6 39.1 2 1003.3 17.8 35.2 2 1003.7 9.3 30.3 2 1004.4 16.5 37.1 2 1004.4 11.2 47.8 hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees hlp2 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking FIL=FILtering level , n=0:Low,1:Med,2:Hi KEY=xmit KEYing mode, n=0:INT, n=1:EXT REP=master REP intvl, n=0:2,1:4,2:6,3:8 SCA=SCAling units , n=0:M,1:Y,2:F CMP=CoMPass enable , n=0:OFF, n=1:ON AND=ANalog Depth enb, n=0:OFF, n=1:ON BLT=Back LighT ctrl , n=0:OFF, n=1:ON CVL=Compass volts LO, enter voltage CVH=Compass volts HI, enter voltage DVL=Depth volts LO , enter voltage DVH=Depth volts HI , enter voltage DSP=Depth SPan , enter value BDR=rs232 BauD Rate ,0:2400,1:4800,2:9600 SCL=rs232 SCaLing , n=0:M,1:Y,2:F 2 9.2 13.9 39.0 hlp1 'n' denotes numeric entry (Use the BACK SPACE key to erase last character entered) (Use the DEL key to erase the command being entered) CTRL_X: Restore Suspended Tracking SEL=SELect target , n = trgt number TRK=TRacKing enable , n=0:OFF, n=1:ON TYP=TYPe of target , n=0:TRAN, n=1:RESP THR=THReshold select, detector threshold CDE=trgt CoDE select, preset target code TEL=TELemetry enable, n=0:OFF, n=1:ON RFR=Receive FReq , enter freq in kHz TFR=Telemetry FReq , enter freq in kHz XFR=Xmitter FReq , enter freq in kHz XRI=Xmt Rep Interval, enter value in Sec PLW=xmit PuLse Width, enter width in mSec TAT=Turn Around Time, enter time in mSec CON=CONe angle , enter in degrees 2 9.3 9.8 40.3 2 9.7 6.4 42.1 2 9.5 5.9 40.2 2 9.4 3.4 40.6 2 9.5 7.4 40.3 2 9.5 12.8 47.9 2 10.9 47.9 48.8 xri4 NEW VALUE = 4.0 2 10.9 46.9 45.2 2 11.1 67.0 52.8 2 10.7 46.4 43.1 2 9.4 3.4 45.6 2 9.4 9.6 48.9 2 9.0 10.2 37.4 xri2 NEW VALUE = 2.0 2 518.5 25.3 52.0 2 616.0 249.6 80.0 2 20.2 127.1 49.6 2 20.4 95.0 59.5 2 21.3 222.3 51.3 2 20.7 178.4 53.4 2 20.9 353.9 52.4 2 21.3 24.6 47.2 2 20.9 49.0 53.1 2 21.1 41.6 48.2 2 339.4 241.8 59.4 2 398.2 240.0 72.8 2 773.2 193.9 78.2 2 399.2 187.1 39.1 2 272.7 184.1 46.0 2 209.5 184.4 56.3 2 21.3 52.0 44.0 2 19.8 23.8 55.7 2 20.3 354.3 56.5 2 20.3 8.6 49.7 2 27.1 66.0 47.4 2 27.0 66.1 49.9 2 26.4 69.8 49.3 2 26.2 69.4 47.0 2 19.1 34.6 55.1 2 19.4 46.9 53.8 2 19.3 45.9 48.8 2 20.0 46.9 46.3 2 722.3 320.5 55.9 2 895.4 345.7 47.4 2 478.9 54.8 74.3 6 2 727.6 17.3 49.0 2 567.5 1.0 53.0 2 17.5 52.4 29.6 2 17.7 52.0 26.4 2 17.7 48.7 42.5 2 17.6 49.4 39.8 2 17.6 49.2 37.4 2 17.7 48.5 37.9 2 17.8 50.2 21.7 2 18.0 51.2 18.6 2 18.3 51.5 22.5 2 547.9 316.9 73.6 2 491.2 219.3 63.9 2 607.0 332.4 63.7 6 2 869.9 310.6 59.1 6 2 410.5 284.4 47.8 2 311.5 325.5 84.0 2 571.9 0.0 87.4 2 1062.7 338.9 63.6 2 709.1 313.6 57.7 2 514.7 12.7 74.8 2 1418.0 199.4 82.2 2 1420.9 213.4 83.4 2 837.2 4.7 51.6 2 1125.2 334.6 55.6 2 559.4 0.6 78.0 2 225.4 46.4 38.5 2 532.9 301.9 79.1 2 733.7 14.8 78.1 2 1435.9 3.1 63.1 2 1202.6 114.8 83.5 2 576.1 339.5 70.8 2 337.1 323.6 58.5 2 268.3 281.2 65.2 2 312.8 222.6 67.5 2 573.5 272.5 77.7 2 464.6 334.7 59.7 2 467.3 349.1 65.0 2 506.5 338.2 62.6 2 910.4 345.8 67.8 2 1405.0 189.4 47.0 2 1076.6 196.7 61.7 2 4.6 189.7 33.8 6 cfg TARGET #2 * Tracking: ON Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 20.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 2 4.4 184.5 27.3 2 4.3 185.3 42.1 2 4.2 184.5 37.4 2 4.1 181.5 37.1 2 4.1 182.9 36.7 2 4.2 184.1 28.2 2 4.2 183.9 24.2 2 4.2 184.2 16.0 2 4.2 183.4 13.2 2 4.2 181.7 7.4 2 4.2 181.3 5.5 2 4.3 180.2 21.6 2 368.8 296.7 47.9 6 2 681.7 357.6 57.1 2 478.6 40.2 72.4 6 2 751.0 34.7 72.1 2 17.2 33.6 48.7 2 17.3 41.4 38.9 2 17.6 41.2 37.0 2 17.5 43.9 34.9 2 17.5 45.8 30.2 2 17.4 45.4 31.4 2 17.4 47.2 23.1 2 17.7 46.0 23.0 2 18.4 47.0 21.1 2 18.5 44.8 12.6 2 18.2 42.8 19.1 2 17.9 42.5 17.5 2 17.3 42.2 16.2 2 17.4 44.8 23.6 2 332.9 71.2 80.3 2 344.8 353.4 61.7 2 1008.4 300.0 82.1 2 1155.8 347.2 71.6 2 639.8 0.0 88.5 2 665.3 345.5 65.9 2 1370.2 219.2 67.9 2 894.8 222.6 73.9 trk0 ENTERED VALUE = 0 TRK = OFF sel1 ENTERED VALUE = 1 SEL = TG1 cfg TARGET #1 * Tracking: OFF Type: TRAN XMITTER * Freq = 26.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 29.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 xfr20 NEW VALUE = 20.0 rfr27.5 NEW VALUE = 27.5 trk1 ENTERED VALUE = 1 TRK = ON cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 20.0 kHz Pulse = 10.0 mS Interval = 2.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 27.5 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 1 198.7 5.2 30.6 6 xri1 NEW VALUE = 1.0 1 375.8 80.6 0.0 1 409.4 317.4 63.1 rfr27 NEW VALUE = 27.0 1 98.8 245.4 74.8 1 128.9 142.7 54.7 1 701.2 132.4 41.0 rfr27.2 * ERROR: Must be to nearest 0.5 kHz RFR=Receive FReq , enter freq in kHz TRY AGAIN 1 498.2 275.2 37.8 cfg TARGET #1 * Tracking: ON Type: TRAN XMITTER * Freq = 20.0 kHz Pulse = 10.0 mS Interval = 1.0 Sec * Xmit and Key Out ON RECEIVER * Freq = 27.0 kHz * Threshold: LO Filtering: LO TAT = 30.0 mS COMPASS * OFF * Lo Volt = 0.1 Hi Volt = 5.1 ANALOG DEPTH * OFF * Lo Volt = 0.0 Hi Volt = 5.0 Span = 100.0 1 611.0 324.4 45.6 1 410.0 240.2 49.3 1 539.2 132.5 28.9 1 449.5 258.1 56.8 1 584.1 260.2 52.1 rfr27.5 NEW VALUE = 27.5 1 521.3 211.1 65.1 1 524.0 23.7 69.7 1 512.9 9.4 64.2 rfr27 NEW VALUE = 27.0 1 713.2 328.5 45.9 1 708.8 224.3 43.6 rfr37.5 NEW VALUE = 37.5 rfr27 NEW VALUE = 27.0 1 473.0 26.7 53.6 rfr29 NEW VALUE = 29.0 1 496.3 182.1 20.8 1 523.4 180.4 16.9 1 538.7 269.4 35.9 6 1 407.9 241.8 18.0 1 505.7 207.5 12.0 1 393.8 206.1 12.1 trk0 ENTERED VALUE = 0 TRK = OFF trk1 ENTERED VALUE = 1 TRK = ON 1 640.6 181.5 14.4 1 667.1 181.0 9.0 sel2 ENTERED VALUE = 2 SEL = TG2 trk1 ENTERED VALUE = 1 TRK = ON 2 53.2 357.3 61.6 1 49.7 178.4 26.8 2 27.6 357.2 47.0 1 127.3 178.9 20.0 2 19.1 356.9 31.3 2 14.9 356.3 27.8 2 3.5 206.8 28.8 1 150.3 180.7 15.9 2 3.5 208.5 23.4 2 3.5 208.6 23.2 2 2.6 173.1 11.9 2 2.6 172.1 12.3 2 2.6 172.2 12.3 2 2.6 170.8 10.5 2 2.6 175.1 5.4 2 2.6 175.4 7.5 2 2.6 174.9 11.4 2 2.6 175.9 9.1 2 2.1 181.1 12.6 2 2.1 181.8 7.5 2 2.1 182.0 9.2 2 2.5 185.1 28.6 2 2.5 179.6 31.7 CPU speed: TURBO Welcome to the ORE LXT System Initializing......... ORE LXT System Model 4430 Rev # 2.00E # SR(m) BRG DA HDG DEPTH TEL WARN