makai Path

trajectory

20140930T022016 [CommandLine]:got command restart logs

20140930T022036 [BPC1]:Failed to receive battery data

20140930T022036 [BPC1]:Communications Fault

20140930T022036 [CBIT]:Communications Fault in component: BPC1

20140930T022159 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140930T022159 [DVL_micro]:Data Fault

20140930T022159 [CBIT]:Data Fault in component: DVL_micro

20140930T022203 [NAL9602]:Verify xmit timeout failure.

20140930T022203 [CBIT]:Data Fault in component: NAL9602

20140930T022217 [BPC1]:A bank expecting battery number:1 and read number: uart

20140930T022217 [BPC1]:Failed to parse bank A battery data

20140930T022217 [CBIT]:Data Fault in component: BPC1

20140930T022326 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140930T022433 mission has been running for 20.105831 min

20140930T022508 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140930T022508 [DVL_micro]:Data Fault

20140930T022508 [CBIT]:Data Fault in component: DVL_micro

20140930T022803 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20140930T022803 [BPC1]:Failed to parse bank B battery data

20140930T022803 [CBIT]:Data Fault in component: BPC1

20140930T022843 [BPC1]:B bank expecting battery number:1 and read number: uart

20140930T022843 [BPC1]:Failed to parse bank B battery data

20140930T022843 [CBIT]:Data Fault in component: BPC1

20140930T022858 [DVL_micro]:DVL failed to acquire valid data within timeout.

20140930T022858 [DVL_micro]:Data Fault

20140930T022858 [CBIT]:Data Fault in component: DVL_micro

20140930T022928 mission has been running for 25.106409 min

20140930T023037 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140930T023039 [BPC1]:Failed to receive battery data

20140930T023039 [BPC1]:Communications Fault

20140930T023039 [CBIT]:Communications Fault in component: BPC1

20140930T023056 [NAL9602]:Failed to initiate SBD session. Error code: 2

20140930T023351 [NAL9602]:Inadequate Iridium signal strength reported: 0

20140930T023436 mission has been running for 30.151124 min

20140930T023916 [BPC1]:Failed to receive battery data

20140930T023916 [BPC1]:Communications Fault

20140930T023916 [CBIT]:Communications Fault in component: BPC1

20140930T023937 [BPC1]:Failed to parse message.

20140930T023937 [BPC1]:Failed to parse bank A battery data

20140930T024029 [BPC1]:Failed to parse message.

20140930T024029 [BPC1]:Failed to parse bank B battery data

20140930T025229 [DVL_micro]:LCB fault: Software Overcurrent.

20140930T025229 [DVL_micro]:Hardware Fault

20140930T030103 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20140930T030456 [DVL_micro]:LCB fault: Software Overcurrent.

20140930T030456 [DVL_micro]:Hardware Fault

20140930T030703 [BPC1]:A bank expecting battery number:1 and read number: uart

20140930T030703 [BPC1]:Failed to parse bank A battery data

20140930T030803 [DVL_micro]:LCB fault: Software Overcurrent.

20140930T030803 [DVL_micro]:Hardware Fault

20140930T031534 [BPC1]:B bank expecting battery number:1 and read number: uart

20140930T031619 [BPC1]:A bank: No match for serial number:5911 was found in the onboard configuration.

20140930T032102 [BPC1]:A bank: No match for serial number:5911 was found in the onboard configuration.

20140930T033307 [BPC1]:A bank expecting battery number:1 and read number: uart

20140930T040030 [BPC1]:A bank: No match for serial number:5911 was found in the onboard configuration.

20140930T040154 [CBIT]:Beginning GF scan

20140930T040301 [BPC1]:B bank expecting battery number:1 and read number: uart

20140930T042913 [BPC1]:B bank: No match for serial number:5911 was found in the onboard configuration.

20140930T044639 [BPC1]:Failed to parse message.

20140930T045100 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped drop weight due to communications timeout

20140930T045103 [NAL9602]:GPS failed to acquire within timeout.

20140930T045103 [CBIT]:Data Fault in component: NAL9602

20140930T045559 [CommandLine]:Deactivating dropweight wire

20140930T065602 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped drop weight due to communications timeout

20140930T065604 [NAL9602]:GPS failed to acquire within timeout.

20140930T065604 [CBIT]:Data Fault in component: NAL9602

20140930T070101 [CommandLine]:Deactivating dropweight wire

20140930T081118 [BPC1]:A bank expecting battery number:1 and read number: uart read:

20140930T081241 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 41 of 46

20140930T081925 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140930T082214 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 45 of 46

20140930T090103 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped drop weight due to communications timeout

20140930T090105 [NAL9602]:GPS failed to acquire within timeout.

20140930T090602 [CommandLine]:Deactivating dropweight wire

20140930T092206 [BPC1]:A bank expecting battery number:1 and read number: uart read:

20140930T093202 [DVL_micro]:No DVL communication! Re-initializing

20140930T093202 [DVL_micro]:Communications Fault

20140930T093203 [CBIT]:Communications Fault in component: DVL_micro

20140930T100221 [CBIT]:Beginning GF scan

20140930T132343 [DVL_micro]:NQ1 string checksum mismatch. Reported:120 Calculated:113

20140930T152246 [DVL_micro]:NQ1 string checksum mismatch. Reported:115 Calculated:117

20140930T153738 [BPC1]:B bank expecting battery number:1 and read number: uart read: H -

20140930T153856 [CommandLine]:got command configSet

20140930T153856 [CommandLine]:Incomplete syntax. Try: help configSet

20140930T155249 [BPC1]:A bank expecting battery number:1 and read number: uart read:

20140930T155726 [CommandLine]:got command restart application