tethys Path

trajectory

20141001T183947 mission has been running for 6.910283 min

20141001T184251 [CommandLine]:got command load ./Missions/Science/science_to.xml

20141001T184252 [CommandLine]:Loaded ./Missions/Science/science_to.xml

20141001T184257 [CommandLine]:got command set science_to.YoYoMaxDepth 25.000000 meter

20141001T184257 [CommandLine]:got command set science_to.Wpt1Lat 36.750000 degree

20141001T184257 [CommandLine]:got command set science_to.Wpt1Lon -121.989998 degree

20141001T184257 [CommandLine]:got command set science_to.NeedCommsTime 30.000000 minute

20141001T184257 [CommandLine]:got command set science_to.Timeout 4.000000 hour

20141001T184257 [CommandLine]:got command run

20141001T184257 [CommandLine]:Running

20141001T184257 [MissionManager]:Started mission science_to

20141001T184330 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141001T184347 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141001T184812 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141001T184947 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141001T184948 [CBIT]:Data Fault in component: NAL9602

20141001T185539 [PNI_TCM]:CRC does not match. Expected:0x29382 got:0x87

20141001T185539 [PNI_TCM]:CRC does not match. Expected:0x8344 got:0x159

20141001T185539 [PNI_TCM]:CRC does not match. Expected:0x444 got:0x75

20141001T185548 [PNI_TCM]:Failed to acquire valid data within timeout.

20141001T185548 [CBIT]:Data Fault in component: PNI_TCM

20141001T185657 [CTD_NeilBrown]:Bad response: *0A#

20141001T185850 [CTD_NeilBrown]:Bad response: *04#

20141001T190519 [CTD_NeilBrown]:Bad response: 76.26

20141001T191003 [CTD_NeilBrown]:Bad response: *06#

20141001T192150 [PNI_TCM]:Failed to acquire valid data within timeout.

20141001T192150 [CBIT]:Data Fault in component: PNI_TCM

20141001T192224 [rhodamine]:LCB fault: Software Overcurrent.

20141001T192224 [rhodamine]:Hardware Fault

20141001T192224 [CBIT]:Hardware Fault in component: rhodamine

20141001T192238 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141001T192307 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141001T192308 [CBIT]:Data Fault in component: NAL9602

20141001T192349 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141001T192737 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141001T192848 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141001T192849 [CBIT]:Data Fault in component: NAL9602

20141001T193101 [PNI_TCM]:Failed to acquire valid data within timeout.

20141001T193101 [CBIT]:Data Fault in component: PNI_TCM

20141001T193143 [CTD_NeilBrown]:Bad response: 73.52

20141001T193624 [ThrusterServo]:Invalid EZ Servo response:"��#�242#"

20141001T193624 [ThrusterServo]:Communications Fault

20141001T193624 [CBIT]:Communications Fault in component: ThrusterServo

20141001T193624 [CTD_NeilBrown]:Bad response: 72.62

20141001T200115 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141001T200447 [CommandLine]:got command load ./Missions/Science/science_to.xml

20141001T200448 [CommandLine]:Loaded ./Missions/Science/science_to.xml

20141001T200453 [CommandLine]:got command set science_to.YoYoMaxDepth 60.000000 meter

20141001T200453 [CommandLine]:got command set science_to.Wpt1Lat 36.750000 degree

20141001T200453 [CommandLine]:got command set science_to.Wpt1Lon -121.989998 degree

20141001T200453 [CommandLine]:got command set science_to.NeedCommsTime 30.000000 minute

20141001T200453 [CommandLine]:got command set science_to.Timeout 4.000000 hour

20141001T200453 [CommandLine]:got command run

20141001T200453 [CommandLine]:Running

20141001T200453 [MissionManager]:Started mission science_to

20141001T203221 [CTD_NeilBrown]:Bad response: *03#

20141001T203803 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141001T204506 [ThrusterServo]:Thruster uart error: serial timeout

20141001T204506 [ThrusterServo]:Communications Fault

20141001T204506 [CBIT]:Communications Fault in component: ThrusterServo

20141001T205249 [CTD_NeilBrown]:Bad response: 060

20141001T212227 [Radio_CDMA]:LCB fault: Invalid Command. Software Overcurrent. Current Limiter Activated.

20141001T212227 [Radio_CDMA]:Hardware Fault

20141001T212227 [CBIT]:Hardware Fault in component: Radio_CDMA

20141001T215906 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141001T220739 [ThrusterServo]:Thruster uart error: serial timeout

20141001T220739 [ThrusterServo]:Communications Fault

20141001T220739 [CBIT]:Communications Fault in component: ThrusterServo

20141001T220811 [Radio_CDMA]:LCB fault: Software Overcurrent.

20141001T220811 [Radio_CDMA]:Hardware Fault

20141001T220811 [CBIT]:Hardware Fault in component: Radio_CDMA

20141001T220812 [MissionManager]:Started mission Default

20141001T220813 mission has been running for 215.413698 min

20141001T221312 mission has been running for 5.000507 min

20141001T221917 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20141001T221930 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20141001T221939 [NAL9602]:Buffer populated but no message sent from NAL9602. Error code: 0

20141001T222410 [CommandLine]:got command schedule asap "load Science/science_to.xml;set science_to.MaxDepth 115.0 meter;set science_to.YoYoMinDepth 5.0 meter;set science_to.Wpt1Lat 36.75 degree;set science_to.Wpt1Lon -121.99 degree;set science_to.Wpt2Lat 36.7488 degree" 2b7ey 1 3.000000

20141001T222410 [CommandLine]:Scheduling command #1 of 3 with id=2b7ey

20141001T222410 [CommandLine]:Scheduled #1 (#1 of 3 with id='2b7ey'): "load Science/science_to.xml;set science_to.MaxDepth 115.0 meter;set science_to.YoYoMinDepth 5.0 meter;set science_to.Wpt1Lat 36.75 degree;set science_to.Wpt1Lon -121.99 degree;set science_to.Wpt2Lat 36.7488 degree" ASAP

20141001T222417 [CommandLine]:got command schedule asap "set science_to.Wpt2Lon -122.0267 degree;set science_to.Wpt3Lat 36.75 degree;set science_to.Wpt3Lon -121.99 degree;set science_to.Wpt4Lat 36.7488 degree;set science_to.Wpt4Lon -122.0267 degree;set science_to.NeedCommsTime 60 minute" 2b7ey 2 3.000000

20141001T222417 [CommandLine]:Scheduling command #2 of 3 with id=2b7ey

20141001T222417 [CommandLine]:Scheduled #2 (#2 of 3 with id='2b7ey'): "set science_to.Wpt2Lon -122.0267 degree;set science_to.Wpt3Lat 36.75 degree;set science_to.Wpt3Lon -121.99 degree;set science_to.Wpt4Lat 36.7488 degree;set science_to.Wpt4Lon -122.0267 degree;set science_to.NeedCommsTime 60 minute" ASAP

20141001T222425 [CommandLine]:got command schedule asap "set science_to.Timeout 10 hour;run " 2b7ey 3 3.000000

20141001T222425 [CommandLine]:Scheduling command #3 of 3 with id=2b7ey

20141001T222425 [CommandLine]:Scheduled #3 (#3 of 3 with id='2b7ey'): "set science_to.Timeout 10 hour;run " ASAP

20141001T222425 [CommandLine]:got command load ./Missions/Science/science_to.xml

20141001T222427 [CommandLine]:Loaded ./Missions/Science/science_to.xml

20141001T222433 [CommandLine]:got command set science_to.MaxDepth 115.000000 meter

20141001T222433 [CommandLine]:got command set science_to.YoYoMinDepth 5.000000 meter

20141001T222433 [CommandLine]:got command set science_to.Wpt1Lat 36.750000 degree

20141001T222433 [CommandLine]:got command set science_to.Wpt1Lon -121.989998 degree

20141001T222440 [CommandLine]:got command set science_to.NeedCommsTime 60.000000 minute

20141001T222442 [CommandLine]:got command set science_to.Timeout 10.000000 hour

20141001T222442 [CommandLine]:got command run

20141001T222442 [CommandLine]:Running

20141001T222442 [MissionManager]:Started mission science_to

20141001T223002 [NAL9602]:GPS failed to acquire within timeout.

20141001T224018 [CTD_NeilBrown]:Bad response: *0B#

20141002T003019 [CBIT]:Beginning GF scan

20141002T003040 [CTD_NeilBrown]:Pressure reading out of range: 786.239990 decibar

20141002T003040 [CTD_NeilBrown]:Salinity reading out of range: 40.494499 psu

20141002T003041 [CTD_NeilBrown]:Salinity reading out of range: 43.887402 psu

20141002T003046 [CTD_NeilBrown]:Pressure reading out of range: 788.289978 decibar

20141002T004412 [CTD_NeilBrown]:Bad response: *0C#

20141002T010125 [MissionManager]:Started mission Default

20141002T012231 [NAL9602]:GPS failed to acquire within timeout.

20141002T013257 [NAL9602]:GPS failed to acquire within timeout.

20141002T020108 [CommandLine]:got command resume

20141002T020110 [MissionManager]:Resuming from info in Logs/20141001T182927/Science_science_to_xml.state

20141002T020110 [CommandLine]:Resuming mission

20141002T020145 [Radio_CDMA]:LCB fault: Software Overcurrent.

20141002T020145 [Radio_CDMA]:Hardware Fault

20141002T020146 [CBIT]:Hardware Fault in component: Radio_CDMA

20141002T021101 [MissionManager]:Started mission Default

20141002T021322 [CommandLine]:got command schedule asap "load Science/science_to.xml;set science_to.MaxDepth 115.0 meter;set science_to.YoYoMinDepth 5.0 meter;set science_to.Wpt1Lat 36.75 degree;set science_to.Wpt1Lon -121.99 degree;set science_to.Wpt2Lat 36.7488 degree" 2bi5f 1 3.000000

20141002T021322 [CommandLine]:Scheduling command #1 of 3 with id=2bi5f

20141002T021322 [CommandLine]:Scheduled #4 (#1 of 3 with id='2bi5f'): "load Science/science_to.xml;set science_to.MaxDepth 115.0 meter;set science_to.YoYoMinDepth 5.0 meter;set science_to.Wpt1Lat 36.75 degree;set science_to.Wpt1Lon -121.99 degree;set science_to.Wpt2Lat 36.7488 degree" ASAP

20141002T021328 [CommandLine]:got command schedule asap "set science_to.Wpt2Lon -122.0267 degree;set science_to.Wpt3Lat 36.75 degree;set science_to.Wpt3Lon -121.99 degree;set science_to.Wpt4Lat 36.7488 degree;set science_to.Wpt4Lon -122.0267 degree;set science_to.NeedCommsTime 60 minute" 2bi5f 2 3.000000

20141002T021328 [CommandLine]:Scheduling command #2 of 3 with id=2bi5f

20141002T021328 [CommandLine]:Scheduled #5 (#2 of 3 with id='2bi5f'): "set science_to.Wpt2Lon -122.0267 degree;set science_to.Wpt3Lat 36.75 degree;set science_to.Wpt3Lon -121.99 degree;set science_to.Wpt4Lat 36.7488 degree;set science_to.Wpt4Lon -122.0267 degree;set science_to.NeedCommsTime 60 minute" ASAP

20141002T021333 [CommandLine]:got command schedule asap "set science_to.Timeout 10 hour;run " 2bi5f 3 3.000000

20141002T021333 [CommandLine]:Scheduling command #3 of 3 with id=2bi5f

20141002T021333 [CommandLine]:Scheduled #6 (#3 of 3 with id='2bi5f'): "set science_to.Timeout 10 hour;run " ASAP

20141002T021341 [CommandLine]:got command set science_to.MaxDepth 115.000000 meter

20141002T021341 [CommandLine]:got command set science_to.YoYoMinDepth 5.000000 meter

20141002T022342 [CommandLine]:got command configSet Radio_CDMA.loadAtStartup 0.000000 bool persist

20141002T022342 [CommandLine]:configSet Radio_CDMA.loadAtStartup requires a restart to take effect.

20141002T022751 [CTD_NeilBrown]:Bad response: *0B#

20141002T030026 [ThrusterServo]:Invalid EZ Servo response:"��#�242#"

20141002T040310 [PNI_TCM]:LCB fault: Invalid Command.

20141002T040310 [PNI_TCM]:Hardware Fault

20141002T043157 [ThrusterServo]:getVelocity uart error serial timeout

20141002T043157 [ThrusterServo]:Thruster uart error: serial timeout

20141002T050429 [CommandLine]:got command configSet list

20141002T050429 [CommandLine]:Listing configuration overrides from Data/persisted.cfg

20141002T050429 [CommandLine]:DataOverHttps.loadAtStartup=1 bool;#

20141002T050429 [CommandLine]:Radio_CDMA.loadAtStartup=0 bool;#

20141002T050429 [CommandLine]:Rowe_600.loadAtStartup=0 bool;#

20141002T050429 [CommandLine]:Vehicle.checkMTQueue=1 bool;#

20141002T051210 [CommandLine]:got command configSet DataOverHttps.loadAtStartup 0.000000 bool persist

20141002T051210 [CommandLine]:configSet DataOverHttps.loadAtStartup requires a restart to take effect.

20141002T051305 [CommandLine]:got command configSet DataOverHttps.loadAtStartup 0.000000 bool persist

20141002T051305 [CommandLine]:configSet DataOverHttps.loadAtStartup requires a restart to take effect.

20141002T051309 [CommandLine]:got command configSet DataOverHttps.loadAtStartup 0.000000 bool persist

20141002T051309 [CommandLine]:configSet DataOverHttps.loadAtStartup requires a restart to take effect.

20141002T051315 [CommandLine]:got command configSet Vehicle.checkMTQueue 0.000000 bool persist

20141002T052014 [CommandLine]:got command configSet Express linearApproximation rhodamine.voltage 0.005000 volt persist

20141002T052043 [CommandLine]:got command restart application