tethys Path

trajectory

20141210T202323 mission has been running for 6.879293 min

20141210T202818 mission has been running for 11.880737 min

20141210T202839 [CommandLine]:got command load ./Missions/Transport/transit.xml

20141210T202840 [CommandLine]:Loaded ./Missions/Transport/transit.xml

20141210T202841 [CommandLine]:got command set transit.Northings 1000.000000 meter

20141210T202841 [CommandLine]:got command set transit.TimeoutDuration 40.000000 minute

20141210T202841 [CommandLine]:got command run

20141210T202841 [CommandLine]:Running

20141210T202841 [MissionManager]:Started mission transit

20141210T202939 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141210T202944 [CommandLine]:got command schedule "load Transport/transit.xml;set transit.Eastings -1000 meter;set transit.TimeoutDuration 40 minute;run "

20141210T202944 [CommandLine]:Scheduled #1: "load Transport/transit.xml;set transit.Eastings -1000 meter;set transit.TimeoutDuration 40 minute;run "

20141210T202949 [CommandLine]:got command schedule "load Transport/transit.xml;set transit.Eastings 1000 meter;set transit.TimeoutDuration 40 minute;run "

20141210T202949 [CommandLine]:Scheduled #2: "load Transport/transit.xml;set transit.Eastings 1000 meter;set transit.TimeoutDuration 40 minute;run "

20141210T202953 [CommandLine]:got command schedule "load Transport/transit.xml;set transit.Northings -1000 meter;set transit.TimeoutDuration 40 minute;run "

20141210T202953 [CommandLine]:Scheduled #3: "load Transport/transit.xml;set transit.Northings -1000 meter;set transit.TimeoutDuration 40 minute;run "

20141210T203201 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141210T203201 [CBIT]:Data Fault in component: NAL9602

20141210T203546 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 44 of 46

20141210T204258 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 35 of 46

20141210T205329 [DVL_micro]:DVL Failure: Failed to read in all data items. Got 43 of 46

20141210T205600 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141210T210051 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141210T210055 [UniversalFixResidualReporter]:Fix residual: 23.0 %DT, over the last 1153.0 m. Residual distance 290.9 m at bearing 96.5 degrees. Fix at (36.8296, -121.8479) with 1153.0 m made good.

20141210T210156 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141210T210157 [CBIT]:Data Fault in component: NAL9602

20141210T210255 [CommandLine]:got command load ./Missions/Transport/transit.xml

20141210T210255 [CommandLine]:Loaded ./Missions/Transport/transit.xml

20141210T210255 [MissionManager]:Started mission Default

20141210T210256 mission has been running for 46.504937 min

20141210T210257 [CommandLine]:got command set transit.Eastings -1000.000000 meter

20141210T210257 [CommandLine]:got command set transit.TimeoutDuration 40.000000 minute

20141210T210257 [CommandLine]:got command run

20141210T210257 [CommandLine]:Running

20141210T210301 [MissionManager]:Started mission transit

20141210T210508 [DVL_micro]:NQ1 string checksum mismatch. Reported:117 Calculated:110

20141210T210625 [CommandLine]:got command schedule asap "configSet Express all persist;configSet Express all persist" rjxc 1 2.000000

20141210T210625 [CommandLine]:Scheduling command #1 of 2 with id=rjxc

20141210T210625 [CommandLine]:Scheduled #4 (#1 of 2 with id='rjxc'): "configSet Express all persist;configSet Express all persist" ASAP

20141210T210628 [CommandLine]:got command schedule asap "configSet Express all persist;" rjxc 2 2.000000

20141210T210628 [CommandLine]:Scheduling command #2 of 2 with id=rjxc

20141210T210628 [CommandLine]:Scheduled #5 (#2 of 2 with id='rjxc'): "configSet Express all persist;" ASAP

20141210T210631 [CommandLine]:got command configSet Express all persist

20141210T210634 [CommandLine]:got command configSet Express all

20141210T210634 [CommandLine]:Incomplete syntax. Try: help configSet

20141210T211345 [DVL_micro]:NQ1 string checksum mismatch. Reported:64 Calculated:93

20141210T213058 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141210T213119 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20141210T213119 [CBIT]:Data Fault in component: NAL9602

20141210T213549 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20141210T213555 [UniversalFixResidualReporter]:Fix residual: 8.5 %DT, over the last 1154.3 m. Residual distance 101.4 m at bearing 131.8 degrees. Fix at (36.8300, -121.8611) with 1154.3 m made good.

20141210T213919 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141210T213935 [CommandLine]:got command stop

20141210T213936 [CommandLine]:got command load ./Missions/Transport/transit.xml

20141210T213936 [CommandLine]:Loaded ./Missions/Transport/transit.xml

20141210T213936 [MissionManager]:Started mission Default

20141210T213938 [CommandLine]:got command set transit.Eastings 1000.000000 meter

20141210T213938 [CommandLine]:got command set transit.TimeoutDuration 40.000000 minute

20141210T213938 [CommandLine]:got command run

20141210T213938 [CommandLine]:Running

20141210T213942 [MissionManager]:Started mission transit

20141210T214305 [CommandLine]:Scheduling is paused for 1 commands

20141210T214306 [MissionManager]:Started mission Default

20141210T214457 [CommandLine]:got command stop

20141210T214500 [CommandLine]:got command schedule clear

20141210T214500 [CommandLine]:#Cleared scheduled commands:1

20141210T214505 [CommandLine]:got command stop

20141210T214507 [CommandLine]:got command schedule clear

20141210T214507 [CommandLine]:#Cleared scheduled commands:0

20141210T215036 [DVL_micro]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20141210T215036 [DVL_micro]:Hardware Fault

20141210T215036 [CBIT]:Hardware Fault in component: DVL_micro

20141210T215046 [DVL_micro]:LCB fault: Software Overcurrent.

20141210T215321 [Radio_CDMA]:Starting PPPD with command:/sbin/pppd /dev/ttyTX1 115200 connect "exec /sbin/chat -v -f /etc/ppp/verizon-attach.chat" disconnect "exec /sbin/chat -v -f /etc/ppp/verizon-detach.chat" lock nocrtscts local passive defaultroute noipdefault ipcp-accept-local usepeerdns noauth persist holdoff 5 maxfail 0

20141210T215402 [CommandLine]:got command report mod latitude_fix

20141210T215402 [CommandLine]:got command report mod longitude_fix

20141210T215455 [CommandLine]:got command report clear

20141210T215717 [DVL_micro]:DVL failed to acquire valid data within timeout.

20141210T215717 [DVL_micro]:Data Fault

20141210T215718 [CBIT]:Data Fault in component: DVL_micro

20141210T215727 [DVL_micro]:LCB fault: Software Overcurrent.

20141210T215727 [DVL_micro]:Hardware Fault

20141210T220107 [DVL_micro]:DVL failed to acquire valid data within timeout.

20141210T220107 [DVL_micro]:Data Fault

20141210T220108 [CBIT]:Data Fault in component: DVL_micro

20141210T220332 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141210T220437 [NAL9602]:Failed to initiate SBD session. Error code: 2

20141210T220448 [DVL_micro]:DVL failed to acquire valid data within timeout.

20141210T220448 [DVL_micro]:Data Fault

20141210T220448 [CBIT]:Data Fault in component: DVL_micro

20141210T221231 [NAL9602]:GPS failed to acquire within timeout.

20141210T221630 [CommandLine]:got command restart application