g
GPS type = U-blox Neo5 
 Select operation to perform  :
! Quit GPS tst :  U.pdate menu
C.old reset    :  Get P.osition
I.nitialize    :  L.IFO 
O.ff gps       :  S.how GPS #s   :  T.ime set
W.akeup GPS    :  X.ecute cycle
2 antenna test
GPS>
x
#secs to try gps fix = 600
UBX_SV_#chans=16
UBX_SV_#chans=16
wake->check_UBX=0
updating location
wake->check_UBX=1
max_sig,min_sig,avg_sig 43 28 38 9
updating location
NEW   40 s, 15:38:56 +36:48.123  -121:47.231   7   28   38   43  0.9 0
15:38:56 08/27/2013 ok:1
utc= 56336 tnow=1413 dt=54923
SetTime returned:1
GPS>
!
BAS>
u

Select operation :
BASE MENU
ESC Quit    : U.pdate menu   : V.ersion     : H.uman Op.
E.EPROM ops : P.ump tests    : S.BE test    : D.ata proc.
A./D test   : R.T Clock      : I.ridium     : G.PS test
B.asic BIT  : F.ull BIT      : Z. batts&vac : L.owpower
X Shut_down : M.ission start : C.omment     : 1 Flash ops
O.ptions
BAS>
r
RTC>
r
RTC decimal YY MM DD HH mm ss=13 08 27 15 39 01 
RTC>
!
BAS>
e
EEP>
d
EEPROM area to display? 
I.Ds : C.als : B.ITvals : S.tatus : M.ission >
m
26 items. How many to show? >


FPchks            60
dBarGo            60
 Fall0            60
Tlast0            43
 Rise0            40
MxPsec           210
  dTdZ             4
mxSeek           120
HVmins          1200
 HVtar            80
 HVtop            60
 HVbot            90
HPchks            60
Dragco         19000
 Prate           230
GPSsec           600
IRIsec          1200
Surfmn           840
 XAchk             8
FnlDiv             1
AbrtYr          2013
AbrtMo             8
AbrtDa            28
AbrtHr            17
AbrtMn             0
ABcysc           600
EEP>
c
EEP>
v
OK EEPROM checksum
EEP>
!
BAS>
1

Select operation :
 ! Quit      | U.p menu
 I.nit ptr   | R.ead ptr
 A.scii dump | H.ex dmp
 1.Erase all | 2.Check all | E.rase pg  | C.heck pg
 F.ill       | W.rt wrd    | B.uf wrt
>
i
Page number (0x08-0x1d) ? 0x08

>
1
Erasing pages 0x08 - 0x0b in sect 0x10 ...Done
Page 0x0c is clean
Page 0x0d is clean
Page 0x0e is clean
Page 0x0f is clean
Page 0x10 is clean
Page 0x11 is clean
Page 0x12 is clean
Page 0x13 is clean
Page 0x14 is clean
Page 0x15 is clean
Page 0x16 is clean
Page 0x17 is clean
Page 0x18 is clean
Page 0x19 is clean
Page 0x1a is clean
Page 0x1b is clean
Page 0x1c is clean
>
u

Select operation :
 ! Quit      | U.p menu
 I.nit ptr   | R.ead ptr
 A.scii dump | H.ex dmp
 1.Erase all | 2.Check all | E.rase pg  | C.heck pg
 F.ill       | W.rt wrd    | B.uf wrt
>
i
Page number (0x08-0x1d) ? 0x08

>
2
Page:0x08 is erased
Page:0x09 is erased
Page:0x0a is erased
Page:0x0b is erased
Page:0x0c is erased
Page:0x0d is erased
Page:0x0e is erased
Page:0x0f is erased
Page:0x10 is erased
Page:0x11 is erased
Page:0x12 is erased
Page:0x13 is erased
Page:0x14 is erased
Page:0x15 is erased
Page:0x16 is erased
Page:0x17 is erased
Page:0x18 is erased
Page:0x19 is erased
Page:0x1a is erased
Page:0x1b is erased
Page:0x1c is erased
Page:0x1d is erased
>
r
Writing to Flash page 0x08 
Next write to FlashAddr = 0x0000
>
!
BAS>
u

Select operation :
BASE MENU
ESC Quit    : U.pdate menu   : V.ersion     : H.uman Op.
E.EPROM ops : P.ump tests    : S.BE test    : D.ata proc.
A./D test   : R.T Clock      : I.ridium     : G.PS test
B.asic BIT  : F.ull BIT      : Z. batts&vac : L.owpower
X Shut_down : M.ission start : C.omment     : 1 Flash ops
O.ptions
BAS>