55


Acumen Instruments Corporation                      
DataBridge SDR2-CF rev. 1.2.072811 

#    interval  I  S  CR LF message
0    3600.000  N  N  Y  Y  atto0,1
1    4500.000  N  Y  Y  Y  atto0,0
2    4800.000  N  N  Y  Y  atto1,1
3    5700.000  N  Y  Y  Y  atto1,0
4    9000.000  N  N  Y  Y  atm1
5    9900.000  N  Y  Y  Y  atm0
6       0.000  N  N  Y  Y  
7       0.000  N  N  Y  Y  
8       0.000  N  N  Y  Y  
9       0.000  N  N  Y  Y  

 1  Edit message contents
 2  Edit message parameters

 Q  Return to main menu

Enter choice (1,2,Q) qq


Acumen Instruments Corporation                      04/02/2013  15:46:39
DataBridge SDR2-CF rev. 1.2.072811 Current filename:\DATA\SDR-0006.DAT

 1  Set time
 2  Set date

 3  Toggle ANSI mode (ANSI is OFF)
 4  Toggle messages (messages are ON)

 5  Edit messages...
 6  Recording parameters...
 7  File system functions...

 8  Enter serial passthrough mode
 9  Configure Data Port for attached device

 R  Start recording (recording is OFF)
 S  Stop recording

Enter choice (1,2,3,4,5,6,7,8,9,R) 88
Entering passthrough mode. Type +++ then pause to return to the menu.


user:21>@mode

  Bad parameter!
Error
user:22>@Modem

 S|  Modem Params    |   Value     |       Range
--+------------------+-------------+-------------------------------------
 7|  AcRspTmOut      | 7.5000      | 2.0 - 99.5 sec (0.5 sec increments)
 2|  DataRetry       | 0           | 0..6
28|  DevEnable       | 0 (Auto)    | 0 (Auto), 1 (MBARI), 2 (Manual-LP),
  |                  |             | 3 (Manual)
 8|  FwdDelay        | 3.0000      | 0.05 to 5 sec (50ms increments)
18|  LocalAddr       | 5           | 0..249
15|  OpMode          | 0 (Command) | 0 (Command), 1 (Online), 2 (Datalog),
  |                  |             | 6 (ContXpnd)
  |  PrintHex        | Dis         | Ena, Dis
14|  RemoteAddr      | 0           | 0 - 249, 255
 5| ^RxPktType       | 0 (MFSK)    | 0 (MFSK), 2 (Xpnd), 3 (Chirp)
16|  ShowBadData     | Ena         | Ena, Dis
  |  SmartRetry      | Dis         | Ena, Dis
  |  StartTones      | Ena         | Ena, Dis
  |  StrictAT        | Dis         | Ena, Dis
 4|  TxRate          | 5 (800)     | 2 (140), 3 (300), 4 (600),
  |                  |             | 5 (800), 6 (1066), 7 (1200),
  |                  |             | 8 (2400), 9 (2560), 10 (5120),
  |                  |             | 11 (7680), 12 (10240), 13 (15360)
 6|  TxPower         | 7 (-3dB)    | 1 (-21dB), 2 (-18dB), 3 (-15dB),
  |                  |             | 4 (-12dB), 5 (-9dB), 6 (-6dB),
  |                  |             | 7 (-3dB), 8 (Max)
17|  WakeTones       | Ena         | Ena, Dis

user:23>@Release

 S|  Release Params  |   Value     |       Range
--+------------------+-------------+-------------------------------------
51| ^FSKRlsDur       | 8           | 4..12
39| ^LstCommsCnt     | 0           | 0..999
41| ^RlsCode         | 55363       | 0..65535
50|  TimedRelease    | 0           | Release in 0-999 hours

user:24>@

  Version
  Serial
  System
  Coproc
  Datalog
  Modem
  Release
  Transport
  Test
  Xpnd
  Nav
user:25>+++

Acumen Instruments Corporation                      04/02/2013  15:47:13
DataBridge SDR2-CF rev. 1.2.072811 Current filename:\DATA\SDR-0006.DAT

 1  Set time
 2  Set date

 3  Toggle ANSI mode (ANSI is OFF)
 4  Toggle messages (messages are ON)

 5  Edit messages...
 6  Recording parameters...
 7  File system functions...

 8  Enter serial passthrough mode
 9  Configure Data Port for attached device

 R  Start recording (recording is OFF)
 S  Stop recording

Enter choice (1,2,3,4,5,6,7,8,9,R)