BEDS)/>var PlatformID = 10 Platform ID DeploymentID = 5 Deployment ID EvtFreq = 50 Sample rate during event (Hz) WatchFreq = 10 Sample rate in watch cycle (Hz) EvtPressureSecs = 1 Sample rate (sec) for pressure sensor during event SysRecSecs = 600 Sample rate (secs) for getting system parameters d uring watch cycle adcAverageNSamples = 10 Number of ADC samples to average for one reading adcDelayBetweenSamplesUs = 1000 Microseconds between ADC samples for avera ging AccelRange = 16 Accelerometer range in g's (2, 4, 8, or 16) GyroRange = 2000 Gyro range in degrees/sec (250, 500, 1000, or 2000 ) ---More--- ImuOutputRate = 50 IMU output frequency in Hz, underneath the watch a nd event freq ImuOutputBitMask = 263171 IMU sensor bit mask (THIS IS THE BLACKEST OF MAGIC ) debugBaud = 115200 Baud rate to use on DEBUG port modemBaud = 9600 Baud rate to acoustic modem Timeout = 120 Timeout on user I/F (secs) ModemPort = 1 Serial Port for Acoustic Modem ModemPeriod = 600 Period (secs) for checking acoustic Modem DeployModemPeriod = 600 Modem Period during deployment mode DeployModeSecs = 86400 How long (seconds) to stay in deployment mode ModemOffset = 0 Offset (secs) from top of ModemPeriod ---More--- ModemOnTime = 60 Period we leave modem on (secs) ModemWarmup = 15 Warmup time for turning on acoustic modem, secs ModemWait = 5 Time before turning off acoustic modem, secs ModemAddr = 2 Acoustic Modem address ModemPower = 6 Acoustic Modem Transmit power (S6 setting) InitModem = FALSE Send init strings to acoustic modem at startup SensorWarmupMs = 2000 Warmup time for turning on system sensors, millise conds SensorMinSecs = 5 If SysRecSys < this, leave sensors on MaxEvent = 7200 Maximum time for an event (secs) XoffTmout = 120 Timeout for XOFF, secs, DEBUG ONLY ---More--- NoMotionThresh = 1.00 No motion threshold, deg/sec NoMotionTime = 2.00 No motion time (secs) logToConsole = 0 0=no echo, 1 or 2 = echo to that serial port maxWatchFileS = 86400 Length of each watch file in seconds. BEDS)/> BEDS)/> BEDS)/> BEDS)/> BEDS)/> BEDS)/> BEDS)/> BEDS)/>priv 100 Privilege level: 100. BEDS)/>var PlatformID = 10 Platform ID DeploymentID = 6 Deployment ID EvtFreq = 50 Sample rate during event (Hz) WatchFreq = 10 Sample rate in watch cycle (Hz) EvtPressureSecs = 1 Sample rate (sec) for pressure sensor during event SysRecSecs = 600 Sample rate (secs) for getting system parameters d uring watch cycle adcAverageNSamples = 10 Number of ADC samples to average for one reading adcDelayBetweenSamplesUs = 1000 Microseconds between ADC samples for avera ging AccelRange = 16 Accelerometer range in g's (2, 4, 8, or 16) GyroRange = 2000 Gyro range in degrees/sec (250, 500, 1000, or 2000 ) ---More--- ImuOutputRate = 50 IMU output frequency in Hz, underneath the watch a nd event freq ImuOutputBitMask = 263171 IMU sensor bit mask (THIS IS THE BLACKEST OF MAGIC ) debugBaud = 115200 Baud rate to use on DEBUG port modemBaud = 9600 Baud rate to acoustic modem Timeout = 120 Timeout on user I/F (secs) ModemPort = 1 Serial Port for Acoustic Modem ModemPeriod = 600 Period (secs) for checking acoustic Modem DeployModemPeriod = 600 Modem Period during deployment mode DeployModeSecs = 86400 How long (seconds) to stay in deployment mode ModemOffset = 0 Offset (secs) from top of ModemPeriod ---More--- ModemOnTime = 60 Period we leave modem on (secs) ModemWarmup = 15 Warmup time for turning on acoustic modem, secs ModemWait = 5 Time before turning off acoustic modem, secs ModemAddr = 2 Acoustic Modem address ModemPower = 6 Acoustic Modem Transmit power (S6 setting) InitModem = FALSE Send init strings to acoustic modem at startup SensorWarmupMs = 2000 Warmup time for turning on system sensors, millise conds SensorMinSecs = 5 If SysRecSys < this, leave sensors on MaxEvent = 7200 Maximum time for an event (secs) XoffTmout = 120 Timeout for XOFF, secs, DEBUG ONLY ---More--- NoMotionThresh = 1.00 No motion threshold, deg/sec NoMotionTime = 2.00 No motion time (secs) logToConsole = 0 0=no echo, 1 or 2 = echo to that serial port maxWatchFileS = 86400 Length of each watch file in seconds. BEDS)/> BEDS)/>type beds.cfg # BEDS.CFG File DeploymentID = 1 PlatformID = 10 ModemAddr = 2 ModemPeriod = 600 SysRecSecs = 600 #debugBaud = 115200 NoMotionThresh = 1.0 BEDS)/> BEDS)/>priv 100 Privilege level: 100. BEDS)/>var PlatformID = 10 Platform ID DeploymentID = 6 Deployment ID EvtFreq = 50 Sample rate during event (Hz) WatchFreq = 10 Sample rate in watch cycle (Hz) EvtPressureSecs = 1 Sample rate (sec) for pressure sensor during event SysRecSecs = 600 Sample rate (secs) for getting system parameters d uring watch cycle adcAverageNSamples = 10 Number of ADC samples to average for one reading adcDelayBetweenSamplesUs = 1000 Microseconds between ADC samples for avera ging AccelRange = 16 Accelerometer range in g's (2, 4, 8, or 16) GyroRange = 2000 Gyro range in degrees/sec (250, 500, 1000, or 2000 ) ---More--- ImuOutputRate = 50 IMU output frequency in Hz, underneath the watch a nd event freq ImuOutputBitMask = 263171 IMU sensor bit mask (THIS IS THE BLACKEST OF MAGIC ) debugBaud = 115200 Baud rate to use on DEBUG port modemBaud = 9600 Baud rate to acoustic modem Timeout = 120 Timeout on user I/F (secs) ModemPort = 1 Serial Port for Acoustic Modem ModemPeriod = 600 Period (secs) for checking acoustic Modem DeployModemPeriod = 600 Modem Period during deployment mode DeployModeSecs = 86400 How long (seconds) to stay in deployment mode ModemOffset = 0 Offset (secs) from top of ModemPeriod ---More--- ModemOnTime = 60 Period we leave modem on (secs) ModemWarmup = 15 Warmup time for turning on acoustic modem, secs ModemWait = 5 Time before turning off acoustic modem, secs ModemAddr = 2 Acoustic Modem address ModemPower = 6 Acoustic Modem Transmit power (S6 setting) InitModem = FALSE Send init strings to acoustic modem at startup SensorWarmupMs = 2000 Warmup time for turning on system sensors, millise conds SensorMinSecs = 5 If SysRecSys < this, leave sensors on MaxEvent = 7200 Maximum time for an event (secs) XoffTmout = 120 Timeout for XOFF, secs, DEBUG ONLY ---More--- NoMotionThresh = 1.00 No motion threshold, deg/sec NoMotionTime = 2.00 No motion time (secs) logToConsole = 0 0=no echo, 1 or 2 = echo to that serial port maxWatchFileS = 86400 Length of each watch file in seconds. BEDS)/> BEDS)/>var deploymentid 2 DeploymentID = 2 BEDS)/>var PlatformID = 10 Platform ID DeploymentID = 2 Deployment ID EvtFreq = 50 Sample rate during event (Hz) WatchFreq = 10 Sample rate in watch cycle (Hz) EvtPressureSecs = 1 Sample rate (sec) for pressure sensor during event SysRecSecs = 600 Sample rate (secs) for getting system parameters d uring watch cycle adcAverageNSamples = 10 Number of ADC samples to average for one reading adcDelayBetweenSamplesUs = 1000 Microseconds between ADC samples for avera ging AccelRange = 16 Accelerometer range in g's (2, 4, 8, or 16) GyroRange = 2000 Gyro range in degrees/sec (250, 500, 1000, or 2000 ) ---More--- ImuOutputRate = 50 IMU output frequency in Hz, underneath the watch a nd event freq ImuOutputBitMask = 263171 IMU sensor bit mask (THIS IS THE BLACKEST OF MAGIC ) debugBaud = 115200 Baud rate to use on DEBUG port modemBaud = 9600 Baud rate to acoustic modem Timeout = 120 Timeout on user I/F (secs) ModemPort = 1 Serial Port for Acoustic Modem ModemPeriod = 600 Period (secs) for checking acoustic Modem DeployModemPeriod = 600 Modem Period during deployment mode DeployModeSecs = 86400 How long (seconds) to stay in deployment mode ModemOffset = 0 Offset (secs) from top of ModemPeriod ---More--- ModemOnTime = 60 Period we leave modem on (secs) ModemWarmup = 15 Warmup time for turning on acoustic modem, secs ModemWait = 5 Time before turning off acoustic modem, secs ModemAddr = 2 Acoustic Modem address ModemPower = 6 Acoustic Modem Transmit power (S6 setting) InitModem = FALSE Send init strings to acoustic modem at startup SensorWarmupMs = 2000 Warmup time for turning on system sensors, millise conds SensorMinSecs = 5 If SysRecSys < this, leave sensors on MaxEvent = 7200 Maximum time for an event (secs) XoffTmout = 120 Timeout for XOFF, secs, DEBUG ONLY ---More--- NoMotionThresh = 1.00 No motion threshold, deg/sec NoMotionTime = 2.00 No motion time (secs) logToConsole = 0 0=no echo, 1 or 2 = echo to that serial port maxWatchFileS = 86400 Length of each watch file in seconds. BEDS)/> BEDS)/> BEDS)/> BEDS)/> BEDS)/>priv 100 Privilege level: 100. BEDS)/>var PlatformID = 10 Platform ID DeploymentID = 6 Deployment ID EvtFreq = 50 Sample rate during event (Hz) WatchFreq = 10 Sample rate in watch cycle (Hz) EvtPressureSecs = 1 Sample rate (sec) for pressure sensor during event SysRecSecs = 600 Sample rate (secs) for getting system parameters d uring watch cycle adcAverageNSamples = 10 Number of ADC samples to average for one reading adcDelayBetweenSamplesUs = 1000 Microseconds between ADC samples for avera ging AccelRange = 16 Accelerometer range in g's (2, 4, 8, or 16) GyroRange = 2000 Gyro range in degrees/sec (250, 500, 1000, or 2000 ) ---More--- ImuOutputRate = 50 IMU output frequency in Hz, underneath the watch a nd event freq ImuOutputBitMask = 263171 IMU sensor bit mask (THIS IS THE BLACKEST OF MAGIC ) debugBaud = 115200 Baud rate to use on DEBUG port modemBaud = 9600 Baud rate to acoustic modem Timeout = 120 Timeout on user I/F (secs) ModemPort = 1 Serial Port for Acoustic Modem ModemPeriod = 600 Period (secs) for checking acoustic Modem DeployModemPeriod = 600 Modem Period during deployment mode DeployModeSecs = 86400 How long (seconds) to stay in deployment mode ModemOffset = 0 Offset (secs) from top of ModemPeriod ---More--- ModemOnTime = 60 Period we leave modem on (secs) ModemWarmup = 15 Warmup time for turning on acoustic modem, secs ModemWait = 5 Time before turning off acoustic modem, secs ModemAddr = 2 Acoustic Modem address ModemPower = 6 Acoustic Modem Transmit power (S6 setting) InitModem = FALSE Send init strings to acoustic modem at startup SensorWarmupMs = 2000 Warmup time for turning on system sensors, millise conds SensorMinSecs = 5 If SysRecSys < this, leave sensors on MaxEvent = 7200 Maximum time for an event (secs) XoffTmout = 120 Timeout for XOFF, secs, DEBUG ONLY ---More--- NoMotionThresh = 1.00 No motion threshold, deg/sec NoMotionTime = 2.00 No motion time (secs) logToConsole = 0 0=no echo, 1 or 2 = echo to that serial port maxWatchFileS = 86400 Length of each watch file in seconds. BEDS)/>type beds.cfg # BEDS.CFG File DeploymentID = 1 PlatformID = 10 ModemAddr = 2 ModemPeriod = 600 SysRecSecs = 600 #debugBaud = 115200 NoMotionThresh = 1.0 BEDS)/>